Advanced Synthetic Scaffolds Based on 1D Inorganic Micro-/Nanomaterials for Bone Regeneration

Inorganic nanoparticulate biomaterials, such as calcium phosphate and bioglass particles, with chemical compositions similar to that of the inorganic component of natural bone, and hence having excellent biocompatibility and bioactivity, are widely used for the fabrication of synthetic bone graft substitutes. Growing evidence suggests that structurally anisotropic, or 1D inorganic micro-/nanobiomaterials are superior to inorganic nanoparticulate biomaterials in the context of mechanical reinforcement and construction of self-supporting 3D network structures. Therefore, in the past decades, efforts have been devoted to developing advanced synthetic scaffolds for bone regeneration using 1D micro-/nanobiomaterials as building blocks. These scaffolds feature extraordinary physical and biological properties, such as enhanced mechanical properties, super elasticity, multiscale hierarchical architecture, extracellular matrix-like fibrous microstructure, and desirable biocompatibility and bioactivity, etc. In this review, an overview of recent progress in the development of advanced scaffolds for bone regeneration is provided based on 1D inorganic micro-/nanobiomaterials with a focus on their structural design, mechanical properties, and bioactivity. The promising perspectives for future research directions are also highlighted.

Application of apatite particles for remediation of contaminated soil and groundwater: A review and perspectives

With rapid industrial development and population growth, the pollution of soil and groundwater has become a critical concern all over the world. Yet, remediation of contaminated soil and water remains a major challenge. In recent years, apatite has gained a surging interest in environmental remediation because of its high treatment efficiency, low cost, and environmental benignity. This review summarizes recent advances in: (1) natural apatite of phosphate ores and biological source; (2) synthesis of engineered apatite particles (including stabilized or surface-modified apatite nanoparticles); (3) treatment effectiveness of apatite towards various environmental pollutants in soil and groundwater, including heavy metals (e.g., Pb, Zn, Cu, Cd, and Ni), inorganic anions (e.g., As oxyanions and F-), radionuclides (e.g., thorium (Th), strontium (Sr), and uranium (U)), and organic pollutants (e.g., antibiotics, dyes, and pesticides); and (4) the removal and/or interaction mechanisms of apatite towards the different contaminants. Lastly, the knowledge or technology gaps are identified and future research needs are proposed.

Tubular nanomaterials for bone tissue engineering

Nanomaterial composition, morphology, and mechanical performance are critical parameters for tissue engineering. Within this rapidly expanding space, tubular nanomaterials (TNs), including carbon nanotubes (CNTs), titanium oxide nanotubes (TNTs), halloysite nanotubes (HNTs), silica nanotubes (SiNTs), and hydroxyapatite nanotubes (HANTs) have shown significant potential across a broad range of applications due to their high surface area, versatile surface chemistry, well-defined mechanical properties, excellent biocompatibility, and monodispersity. These include drug delivery vectors, imaging contrast agents, and scaffolds for bone tissue engineering. This review is centered on the recent developments in TN-based biomaterials for structural tissue engineering, with a strong focus on bone tissue regeneration. It includes a detailed literature review on TN-based orthopedic coatings for metallic implants and composite scaffolds to enhance in vivo bone regeneration.

Combined strategy of blending and surface modification as an effective route to prepare antifouling ultrafiltration membranes

Ultrafiltration (UF) membranes blended with hydrophilic nanomaterials usually exhibit preferable overall performance including the membrane permeability and antifouling capability. However, the improvement in antifouling performance may be not outstanding due to the small amount of nanomaterial distributed near the membrane surface and the limited improvement in membrane hydrophilicity. Notably, excess addition of nanomaterials may lead to the decline in membrane permeability. In order to solve the above problem, we integrated the strategy of blending and surface modification to construct novel hybrid UF membranes. Novel nanohybrid was prepared via tannic acid (TA) coating on hydroxyapatite nanotubes (HANTs) and the subsequent grafting of zwitterionic polyethylenimine (ZPEI). The prepared nanohybrid (HANTs@TA-ZPEI) was incorporated with the polysulfone containing tertiary amine groups to fabricate hybrid membranes via the solution blending and the subsequent immersion-precipitation phase inversion process. Then the matrix was modified with zwitterions via the reaction of tertiary amine group with 1, 3-propane sultone. UF tests were conducted using the bovine serum albumin (BSA) and humic acid (HA) as the representative foulants. Results showed that both the permeability and the antifouling performance of the membranes achieved favorable promotion. Thereinto, the water flux of M-B0.4-Z membrane (pre blended with 0.4 wt% HANTs@TA-ZPEI in the casting solution and post-surface modified) exhibited 2.6 times that of the pristine membrane and the flux recovery ratio (FRR) for BSA and HA attained 93.4% and 96.1%, respectively. By the combination of blending and surface modification, both the membrane permeability and fouling resistant properties could attain remarkable promotion, which exerted the advantages of two methods and made up the deficiency of single blending method.

Experimental and theoretical investigations of the influences of one-dimensional hydroxyapatite nanostructures on cytocompatibility

Due to their simple crystal structures, one-dimensional hydroxyapatite (HA) nanostructures are easily to be applied to understand the fundamental concepts about the influences of HA dimensionality on physical, chemical, and biological properties. So, in this work, three typical HA one-dimensional nanostructures, HA nanotubes, HA nanowires, and HA nanospheres, were prepared, whose theoretical structures were built also. in vitro cytocompatibility test proved that, contrasting with TCPS, HA one-dimensional nanostructures had certain degree of cytotoxicity because HA nanostructures increase the generation of intracellular reactive oxygen species (ROS) and intracellular calcium. Theoretical simulation indicated that HA nanosphere has higher intracellular ROS generation and lower ROS storage amount than HA nanowire and HA nanotube, which were the possible reasons for its stronger cytotoxicity. Among these typical one-dimensional nanostructures, owing to higher drug storage amount and sustained delivery ability, HA nanotube was more potential application in orthopedics. The tubular structure of HA nanotubes could be used as reservoirs for small molecule drugs or growth factors. The cytocompatibility of HA nanostructures can be improved obviously when they were produced into two-dimensional structures. The prepared multilayer structure can simulate lamellar structures of Harvard system and enhance the cytocompatibility of Ti substrate. Therefore, the method used in this work is a prospective method to improve the inherently bio-inert of Ti when used in hard tissue repairing.

Fabrication of hydroxyapatite/hydrophilic graphene composites and their modulation to cell behavior toward bone reconstruction engineering

Cell adhesion was the first step of bone reconstruction. While hydroxyapatite (HA)/graphene composites had been utilized for improving the cell adhesion and bone osteogenesis, the impact of cell adhesion and HA/graphene composites, especially HA/hydrophilic graphene (HG) composites, on internal interaction force and external surface properties remained poorly understood. Here, higher stability HA/HG composites were synthesized without extra ion introduction with in situ self-assembling method. And with XRD, FT-IR, XPS and Raman analyses, the evidences of the formation of HA and the introduction of HG was clear. TEM and SEM images showed the net-like spatial structure due to the internal interaction force between HA and HG, which provided the strain stimulation for cell adhesion. Subsequently, the external surface properties of HA/HG composites demonstrated that the roughness and hydrophilic ability of HA/HG composites could be artificially regulated by increasing the content of HG. Besides, the cell proliferation rate of HA/HG composites had been investigated. Compared to the intrinsic HA, HA/5%HG possessed the higher cell proliferation rate (264.81%) and promoted the spreading and growth of MC3T3-E1 cells. Finally, the regulation mechanism between HA/HG and cell adhesion were illuminated in detail. The excellent regular behavior of HA/HG composites for cell adhesion made them promising candidates for bone reconstruction and repairing. The present work provided the reference for the design of modifiable biomaterials and offered much inspiration for the future research of bone reconstruction engineering.

Nano-hydroxyapatite polymeric hydrogels for dye removal

Herein, two kinds of nano-hydroxyapatite were synthesized from Clam and Magellan shell by wet chemical precipitation method. Mainly, carboxymethyl cellulose/acrylamide/nano-hydroxyapatite composite hydrogels were developed via a free-radical polymerization process and investigated as a sorbent for Acid Blue 113 (AB) from aqueous AB solution. The swelled and kinetic behaviours of hydrogels were investigated using a gravimetric method. The swelling properties of the CMC-AM-hydrogels were influenced by the calcium electrolytes (Ca²⁺) content in nano-hydroxyapatites. The diffusion coefficient value increased with the increase of nano-hydroxyapatite content in the CMC-AM/nHA-CS (0.22353–0.27681 cm² s⁻¹) and CMC-AM/nHA-MS (0.22377–0.29737 cm² s⁻¹) hydrogels. The mechanism of water diffusion was found to be anomalous transport. The CMC-AM/nHA-MS hydrogels showed high AB absorption efficiency and adsorption capacities. These results explained that the nano-hydroxyapatites of Magellan shells based hydrogels are attractive nanocomposite hydrogels for the adsorption of dye in the water purification applications.

Schematic diagram of nHA and nHA based hydrogels development via wet chemical and free-radical polymerization process and absorbent process of nHA hydrogel.

One-dimensional hydroxyapatite materials: preparation and applications

As one of the biominerals, hydroxyapatite (HAP) plays important roles in biology, and inspires researchers to investigate HAP-based materials for the applications in various biomedical fields. Among them, one-dimensional (1-D) micro-/nanostructured HAP materials have attracted great interest in the last decades. This review summarizes the preparation and applications of 1-D HAP materials, and discusses different aspects of 1-D HAP materials. Various synthetic methods have been developed to prepare 1-D HAP materials with different morphologies, sizes, surface properties and crystallinities. In addition, elements-substituted 1-D HAP materials and composites have also been prepared. Surfactants and additives are usually adopted to control the nucleation and growth of 1-D HAP materials, but the related mechanisms are not very clear yet. The applications of 1-D HAP materials have been widely investigated, and the biomedical applications show great prospect but still need further improvements. A new kind of highly flexible fire-resistant inorganic paper made of ultralong HAP nanowires has been developed and is a promising alternative of the traditional cellulose paper for valuable archives and important documents. Regardless of the advances, further studies should be made for preparing 1-D HAP materials with controlled structures, sizes and morphologies and for boosting their various applications.

Prolonged fluorescence lifetime of carbon quantum dots by combining with hydroxyapatite nanorods for bio-applications

Carbon quantum dots (CQDs) are a new type of fluorescent nanoparticle for cell imaging and tracking. However, they would easily diffuse and quench, followed by the loss of their fluorescence ability. By connecting their functional groups with other nanoparticles, the CQDs will be protected from destruction and exhibit long-time fluorescence. Here, carbon quantum dot-hydroxyapatite (CQD-HAp) hybrid nanorods were prepared by the self-assembly of CQDs on the surface of HAp nanorods through a facile one-pot process. The morphology and size of the CQD-HAp hybrid nanorods can be well controlled by using oleic acid, which meanwhile is the source of CQDs. The hydrophilic CQD-HAp hybrid nanorods have prolonged fluorescence life due to the connection between CQDs and HAp nanorods, and exhibit a higher fluorescence quantum yield than pure CQDs. In addition, when hybrid nanorods load doxorubicin (Dox) to form Dox-CQD-HAp hybrid nanorods, they can more efficiently kill human cervical cancer (HeLa) cells, rather than human prostatic cancer (PC-3) cells. Long time fluorescence for cell imaging and high efficiency in killing cancer cells as a drug-delivery medium make CQD-HAp hybrid nanorods have great potential applications in the bio-field.

Hydrothermally processed 1D hydroxyapatite: Mechanism of formation and biocompatibility studies

Recent developments in bone tissue engineering have led to an increased interest in one-dimensional (1D) hydroxyapatite (HA) nano- and micro-structures such as wires, ribbons and tubes. They have been proposed for use as cell substrates, reinforcing phases in composites and carriers for biologically active substances. Here we demonstrate the synthesis of 1D HA structures using an optimized, urea-assisted, high-yield hydrothermal batch process. The one-pot process, yielding HA structures composed of bundles of ribbons and wires, was typified by the simultaneous occurrence of a multitude of intermediate reactions, failing to meet the uniformity criteria over particle morphology and size. To overcome these issues, the preparation procedure was divided to two stages: dicalcium phosphate platelets synthesized in the first step were used as a precursor for the synthesis of 1D HA in the second stage. Despite the elongated particle morphologies, both the precursor and the final product exhibited excellent biocompatibility and caused no reduction of viability when tested against osteoblastic MC3T3-E1 cells in 2D culture up to the concentration of 2.6mg/cm(2). X-ray powder diffraction combined with a range of electron microscopies and laser diffraction analyses was used to elucidate the formation mechanism and the microstructure of the final particles. The two-step synthesis involved a more direct transformation of DCP to 1D HA with the average diameter of 37nm and the aspect ratio exceeding 100:1. The comparison of crystalline domain sizes along different crystallographic directions showed no signs of significant anisotropy, while indicating that individual nanowires are ordered in bundles in the b crystallographic direction of the P63/m space group of HA. Intermediate processes, e.g., dehydration of dicalcium phosphate, are critical for the formation of 1D HA alongside other key aspects of this phase transformation, it must be investigated in more detail in the continuous design of smart HA micro- and nano-structures with advanced therapeutic potentials.

An improved model for exploring the effect of physicochemical properties of alginate-based microcapsules on their fibrosis formation in vivo

An effectivein vitromodel established forexploring the effect ofthephysicochemical properties of alginate-based microcapsules on their fibrosis formation.

Natural rubber latex coated with calcium phosphate for biomedical application

Natural rubber latex (NRL) is a flexible biomembrane that possesses angiogenic properties and has recently been used for guided bone regeneration, enhancing healing without fibrous tissue, allergies or rejection. Calcium phosphate (Ca/P) ceramics have chemical, biological, and mechanical properties similar to mineral phase of bone, and ability to bond to the host tissue, although it can disperse from where it is applied. Therefore, to create a composite that could enhance the properties of both materials, NRL biomembranes were coated with Ca/P. NRL biomembranes were soaked in 1.5 times concentrated SBF solution for seven days, avoiding the use of high temperatures. SEM showed that Ca/P has been coated in NRL biomembrane, XRD showed low crystallinity and FTIR showed that is the carbonated type B. Furthermore, hemolysis of erythrocytes, quantified spectrophotometrically using materials (Ca/P, NRL, and NRL + Ca/P) showed no hemolytic effects up to 0.125 mg/mL (compounds and mixtures), indicating no detectable disturbance of the red blood cell membranes. The results show that the biomimetic is an appropriate method to coat NRL with Ca/P without using high temperatures, aiming a new biomembrane to improve guided bone regeneration.

Synthesis of nanostructured methotrexate/hydroxyapatite: Morphology control, growth mechanism, and bioassay explore

In this study, a new structure of methotrexate/hydroxyapatite (MTX/HAp) nanorods via a facile hydrothermal route was reported. The as-synthesized samples were then characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), thermogravimetric (TG) and differential scanning calorimetry (DSC) analysis. In order to explore the formation mechanism, the effects of reaction time, MTX concentrations and addition of ethylene glycol (PEG) were emphatically examined. The results indicated that, with the increase in reaction time, the fibrous nanoparticles turned to needle-like and then to rod-like. Our study also proved that reaction time of 12h was enough for the full-growth of the nanostructure. Drug-loading capacities (AIn) rose dramatically in the first 12h and reached a plateau afterwards. Importantly, MTX played a critical role in the longitudinal growth of MTX/HAp nanostructure and polyethylene glyco (PEG) was a good dispersing agent to improve the monodispersity. As expected, the functional agent of MTX was served as both the target anticancer drug loaded in HAp and effective complex agents to modify and control the morphologies of MTX/HAp. Lastly, in vitro bioassay tests gave us evidence that obvious tumor inhibition can be achieved when MTX was hybridized with HAp.

Facile in situ growth of Fe3O4 nanoparticles on hydroxyapatite nanorods for pH dependent adsorption and controlled release of proteins

The magnetic hydroxyapatite nanostructures were prepared by hydrothermal technique and studied their protein adsorption and in vitro cytotoxicity in humen MGC-803 cell.