Thermo-pH-Salt Environmental Terpolymers Influenced by 2-((Dimethylamino)methyl)-4-methylphenyl Acrylate: A Comparative Study for Tuning Phase Separation Temperature

This study offers a comparison between three different types of thermoresponsive (TR) and thermo-pH-salt (TPR) multiresponsive polymers including homopoly(N-isopropylacrylamide) (PNIPAAm), copolymers with three different monomers, 2-hydroxyethyl methacrylate (HEMA), N,N-dimethylacrylamide (DMAAm), and styrene (S) at three different concentrations (5, 10, and 20 mol %), and a PNIPAAm terpolymer with 5, 10, and 20 mol % 2-((dimethylamino)methyl)-4-methylphenyl acrylate (DMAMCA) and 10 mol % HEMA, DMAAm, and S monomers. All polymers were chemically analyzed with 1H NMR and Fourier transform infrared spectroscopy (FT-IR) as well as gel permeation chromatography (GPC) for the molecular weights and dispersity and differential scanning calorimeter (DSC) for the glass transition temperatures. The cloud point, also known as the phase separation temperature (Cp), was determined for all polymers by a turbidity test using a UV-vis spectrophotometer; a micro-differential scanning calorimeter was used for measuring the cloud point in deionized water. The influence of a tertiary amine cationic group of DMAMCA changed the behavior of TR copolymers into TPR by shifting the cloud point of the TPR to higher values in acidic solutions (lower pH) and to lower values in alkaline solutions. The Cp was measured at different concentrations of Hofmeister kosmotropic and chaotropic anion salt solutions in a range of pH solutions for the terpolymers. It demonstrated the same behavior as mentioned in pH solutions besides the effect of salt ions. By measuring the Tc and Cp of these polymers, we can exploit various applications of stimuli-responsive materials for sensors and biomedical technology.

Advances in amphiphilic polylactide/vinyl polymer based nano-assemblies for drug delivery

Micelles from self-assembled amphiphilic copolymers are highly attractive in drug delivery, due to their small size and hydrophilic stealth corona allowing prolonged lifetimes in the bloodstream and thus improved drug bioavailability. Polylactide (PLA)-based amphiphilic copolymer micelles are key candidates in this field, owing to the well-established biodegradability and biocompatibility of PLA. While PLA-b-poly(ethylene glycol) (PEG) block copolymer micelles can be seen as the "gold standard" in drug delivery research so far, the progresses in controlled radical polymerizations (Atom Transfer Radical Polymerization, Reversible Addition-Fragmentation Transfer and Nitroxide Mediated Polymerization) have offered new opportunities in the design of advanced amphiphilic copolymers for drug delivery due to their flexibility in many regards: (i) they can be easily combined with ring-opening polymerization (ROP) of lactide, with a diversity in types of architectures (e.g., block, graft, star), (ii) they allow (co)polymerization of a wide range of vinyl monomers, possibly circumventing PEG limitations, (iii) functionalization (with biomolecules or stimuli-cleavable moieties) is versatile due to end-group fidelity and copolymerization ability with reactive/functional comonomers. In this review, we report on the advances in the past decade of such amphiphilic PLA/vinyl polymer based nano-carriers, regarding key properties such as stealth character, cell targeting and stimuli-responsiveness.

A review of stimuli-responsive polymeric micelles for tumor-targeted delivery of curcumin

Despite a potential drug with multiple pharmacological activities, curcumin has disadvantages of the poor water solubility, rapid metabolism, low bioavailability, which considerably limit its clinical application. Currently, polymeric micelles (PMs) have gained widespread concern due to their advantageous physical and chemical properties, easy preparation, and biocompatibility. They can be used to improve drug solubility, prolong blood circulation time, and allow passive targeted drug delivery to tumor through enhanced penetration and retention effect. Moreover, studies focused on tumor microenvironment offer alternatives to design stimulus-responsive smart PMs based on low pH, high levels of glutathione, altered enzyme expression, increased reactive oxygen species production, and hypoxia. There are various external stimuli, such as light, ultrasound, and temperature. These endogenous/exogenous stimuli can be used for the research of intelligent micelles. Intelligent PMs can effectively load curcumin with improved solubility, and intelligently respond to release the drug at a controlled rate at targeted sites such as tumors to avoid early release, which markedly improves the bioavailability of curcumin. The present review is aimed to discuss and summarize recent developments in research of curcumin-loaded intelligent PMs based on endogenous and exogenous stimuli, and facilitates the development of novel delivery systems for future research.

6-Aminocaproic acid as a linker to improve near-infrared fluorescence imaging and photothermal cancer therapy of PEGylated indocyanine green

Clinical extensive application of indocyanine green (ICG) is limited by several drawbacks such as poor bioenvironmental stability, aggregate propensity, and rapid elimination from the body, etc. In this study, we construct a novel amphiphilic mPEG-ACA-ICG conjugate by modifying synthetic heptamethine cyanine derivative ICG-COOH with a hydrophobic linker 6-aminocaproic acid (ACA) and amino-terminal poly(ethylene glycol) (mPEG-NH₂). The as-prepared mPEG-ACA-ICG conjugate has the ability to self-assemble into micellar aggregates in an aqueous solution with a lower CMC value than mPEG-ICG conjugate without ACA linker. More importantly, compared with free ICG and mPEG-ICG conjugate, mPEG-ACA-ICG nanomicelles exhibited better stability and higher photothermal conversion efficiency upon near-infrared light irradiation due to the intramolecular introduction of a hydrophobic ACA segment. In our in vivo experiment, mPEG-ACA-ICG nanomicelles ensured the formidable effect on tumor photothermal therapy (PTT) and the maximum tumor inhibition rate reached 72.6 %. In addition, real-time determination ability for fluorescence image-guided surgery (FIGS) of mPEG-ACA-ICG nanomicelles was also confirmed on tumor xenograft mice model. Taken together, mPEG-ACA-ICG conjugate may hold great promise for non-invasive cancer theranostics.

Novel Thermosensitive Polymer-Modified Liposomes as Nano-Carrier of Hydrophobic Antitumor Drugs

Thermo-sensitive polymer-modified liposomes are able to achieve site-specific delivery of drugs. In this work, thermo-sensitive polymers were synthesized by atomic transfer radical polymerization of N-isopropyl acrylamide (NIPAAm) and N,N-dimethyl acrylamide (DMAAm) using bromoisobutyryl distearoyl phosphoethanolamine (DSPE-Br) as initiator. The resulting PNIPAAm-DSPE and P(NIPAAm-DMAAm)-DSPE polymers were characterized using proton nuclear magnetic resonance, Fourier transform infrared, and ultraviolet-visible spectroscopy. PNIPAAm-DSPE and P(NIPAAm-DMAAm)-DSPE exhibit a lower critical solution temperature of 34.0 and 46.9°C in water, and 29.8 and 38.8°C in phosphate buffered saline, respectively. Paclitaxel-loaded thermo-sensitive liposomes were prepared using film hydration method, followed by post-insertion of P(NIPAAm-DMAAm)-DSPE into the liposome bilayer. Drug release of traditional and thermosensitive liposomes was comparatively studied at 37 and 40°C. The total release and release rate of thermosensitive liposomes at 40°C were much higher than those at 37°C. And drug release is higher for thermosensitive liposomes than for traditional liposomes because insertion of thermo-sensitive polymer chains affects the system's stability. MTT assay showed that thermo-sensitive liposomes present no cytotoxicity to L929 cells at the tested concentrations, and paclitaxel-loaded liposomes have significant cytotoxicity against A549 cancer cells. Therefore, it is concluded that P(NIPAAm-DMAAm)-DSPE modified thermo-sensitive liposomes could be promising as nano-carrier of antitumor drugs.

Thermoresponsive gating membranes embedded with liquid crystal(s) for pulsatile transdermal drug delivery: An overview and perspectives

Due to the circadian rhythm regulation of almost every biological process in the human body, physiological and biochemical conditions vary considerably over the course of a 24-h period. Thus, optimal drug delivery and therapy should be effectively controlled to achieve the desired therapeutic plasma concentrations and therapeutic drug responses at the required time according to chronopharmacological concepts, rather than continuous maintenance of constant drug concentrations for an extended time period. For many drugs, it is not always necessary to constantly deliver a drug into the human body under disease conditions due to rhythmic variations. Pulsatile drug delivery systems (PDDSs) have been receiving more attention in pharmaceutical development by providing a predetermined lag period, followed by a fast or rate-controlled drug release after application. PDDSs are characterized by a programmed drug release, which may release a drug at repeatable pulses to match the biological and clinical needs of a given disease therapy. This review article focuses on thermoresponsive gating membranes embedded with liquid crystals (LCs) for transdermal drug delivery using PDDS technology. In addition, the principal rationale and the advanced approaches for the use of PDDSs, the marketed products of chronotherapeutic DDSs with pulsatile function designed by various PDDS technologies, pulsatile drug delivery designed with thermoresponsive polymers, challenges and opportunities of transdermal drug delivery, and novel approaches of LC systems for drug delivery are reviewed and discussed. A brief overview of all academic research articles concerning single LC- or binary LC-embedded thermoresponsive membranes with a switchable on-off permeation function through topical application by an external temperature control, which may modulate the dosing interval and administration time according to the therapeutic needs of the human body, is also compiled and presented. In the near future, since thermal-based approaches have become a well-accepted method to enhance transdermal delivery of different water-soluble drugs and macromolecules, a combination of the thermal-assisted approach with thermoresponsive LCs membranes will have the potential to improve PDDS applications but still poses a great challenge.

A thermo-sensitive, injectable and biodegradable in situ hydrogel as a potential formulation for uveitis treatment

The thermo-sensitive hydrogels with high drug loading rate achieved sustained drug release over 2 weeks. Histopathological examination of retina confirmed the excellent biocompatibility and effective anti-inflammatory property of the hydrogel.

Micelles prepared from poly(N-isopropylacrylamide-co-tetraphenylethene acrylate)-b-poly[oligo(ethylene glycol) methacrylate] double hydrophilic block copolymer as hydrophilic drug carrier

Thermal-induced micelles prepared with P(NIPAAm-co-TPE)-b-POEGMA double hydrophilic block copolymers for hydrophilic drug release. Hydrogen bonds are formed between PNIPAAm and thymopentin.

Stereocomplex poly(lactic acid) nanoparticles crystallized through nanoporous membranes and application as nucleating agent

Stereocomplex crystallization of poly(l-lactic acid) (PLLA) and poly(d-lactic acid) (PDLA) was performed by flowing their blended solution through nano-channels of porous membranes.

Thermo-responsive drug release from self-assembled micelles of brush-like PLA/PEG analogues block copolymers

Thermo-responsive brush-like amphiphilic poly[2-(2-methoxyethoxy) ethyl methacrylate-co-oligo(ethylene glycol) methacrylate]-b-poly(l-lactide)-b-poly[2-(2-methoxyethoxy) ethyl methacrylate-co-oligo(ethylene glycol) methacrylate] [P(MEO2MA-co-OEGMA)-b-PLLA-b-P(MEO2MA-co-OEGMA)] triblock copolymers were synthesized by atom transfer radical polymerization of MEO2MA and OEGMA co-monomers using a α,ω-Bromopropionyl poly(l-lactide) (Br-PLLA-Br) macroinitiator. The resulting copolymers with MEO2MA/OEGMA molar ratio ranging from 79/21 to 42/58 were characterized by (1)H nuclear magnetic resonance and size exclusion chromatography. Thermo-responsive micelles were obtained by self-assembly of copolymers in aqueous medium. The micelles are spherical in shape with sizes varying from 20.7 to 102.5 nm. A hydrophobic anticancer drug, curcumin, was encapsulated in micelles by using membrane hydration method. The properties of drug loaded micelles were determined by dynamic light scattering, transmission electron microscopy and lower critical solution temperature (LCST) measurements. The micelles size decreases from 102.5 nm for blank micelles to 37.6 nm with 10.8% drug loading, suggesting that the drug plays an important role in the micellization procedure. The LCST decreases from 45.1°C for blank micelles to 40.6 and 38.3°C with 5.9 and 10.8% drug loading, respectively. In vitro drug release was performed in pH 7.4 PBS at different temperatures. Data show that the release rate was significantly enhanced above the LCST comparing with that below the LCST. The amount of released drug at 41°C was ca. 20% higher than that at 37°C. Burst-like release was depressed due to enhanced interaction between drug with hydrophobic PLA and PMA chains.