Biochar nanosphere-functionalized carbon fibers for in-tube solid-phase microextraction of polycyclic aromatic hydrocarbons in environmental water followed by liquid chromatography and diode array detection

In order to improve the extraction ability of carbon fibers (CFs) for microextraction of polycyclic aromatic hydrocarbons (PAHs), biochar nanospheres derived from glucose were in-situ grown onto the surface of CFs via hydrothermal synthesis. The surface morphology and elemental composition of biochar nanospheres-CFs were investigated by scanning electron microscopy and X-ray photoelectron spectroscopy. Thereafter, the biochar nanosphere-CFs were pulled into the polyetheretherketone tube for solid-phase microextraction, and the tube was combined with high-performance liquid chromatography-diode array detector to online detect PAHs. With the help of π-stacking, hydrophobic, and hydrophilic effect of biochar nanospheres, the extraction efficiency of CFs was greatly enhanced (enrichment factor increased by 293% compared with  the original). The conditions affecting the analytical performance (sampling volume, sampling rate, methanol content, and desorption time) were investigated. Under the optimal conditions, an online analytical method for microextraction and determination of several PAHs was developed, and satisfactory results were achieved. The limits of detection were 0.003-0.010 ng mL-1 owing to high enrichment effect (2973-3600), linearity ranged from  0.010-15.0 ng mL-1, and relative standard deviations were 0.4%-1.6% (intra-day) and 2.4%-4.4% (inter-day), respectively. The method was applied to analyze environmental water samples (rain water, snow water, and river water), and spiked recoveries within 80.0%-119% were obtained.

Analysis of Different Methods of Extracting NSAIDs in Biological Fluid Samples for LC-MS/MS Assays: Scoping Review

The aim of this study was to carry out a systematic investigation and analysis of different drug extraction methods, specifically non-steroidal anti-inflammatory drugs in biological fluid samples, for Liquid Chromatography in Mass Spectrometry assays (LC-MS/MS). A search was carried out in the main databases between 1999 and 2021, following the Preferred Reporting Items for Systematic reviews and Meta-Analyses extension for Scoping Reviews (PRISMA-ScR) checklist. Data were obtained through PubMed, Lilacs, Embase, Scopus, and Web of Science databases using the Boolean operators AND and OR. Studies were pre-selected by title and abstract by two independent reviewers. The selected texts were read in full, and only those that were complete and compatible with the inclusion and exclusion criteria were eligible for this research. A total of 248 references were obtained in the databases. After removing the duplicates and analyzing the titles and abstracts, 79 references were evaluated and passed to the next phase, which comprised the complete reading of the article. A total of 39 publications were eligible for this study. In 52% of the studies, the authors used the liquid–liquid extraction method (LLE), while in 41%, the solid-phase extraction method (SPE) was used. A total of 5% used microextraction methods and 2% used less-conventional techniques. The literature on the main methods used, the LLE and SPE methods, is extensive and consolidated; however, we found other studies that reported modifications of these traditional techniques, which were equally validated for use in LC-MS/MS. From this review, it is concluded that the diversity of techniques, reliability, and practical information about each analytical method used in this study can be adapted to advances in LC-MS/MS techniques; however, more ecological, economic, and sustainable approaches should be explored in the future.

Ultra-trace levels voltammetric determination of Pb2+ in the presence of Bi3+ at food samples by a Fe3O4@Schiff base Network1 modified glassy carbon electrode

In this research, a highly sensitive electrochemical sensor was developed for the square wave anodic stripping voltammetric determination of Pb²⁺ at ultra-trace levels. A Glassy carbon electrode was modified with an in-situ electroplated bismuth film and the nanocomposite of a recently synthesized melamine based covalent organic framework (schiff base network₁ (SNW₁)) and Fe₃O₄ nanoparticles (Fe₃O₄@SNW₁). The obtained results exhibit clearly that combination of Fe₃O₄@SNW₁ and in-situ electroplated bismuth film enhances the sensitivity of the modified electrode towards Pb²⁺ remarkably. A Plackett-Burman design was implemented for screening experimental factors to specify the significant variables influencing the sensitivity of the electroanalytical method. Afterward, the effective factors were optimized using Box-Behnken design (BBD). Under optimized conditions, the proposed electrode showed a linear response towards Pb²⁺ in the concentration range of 0.003-0.3 μmol L^-1 with the detection limit of 0.95 nmol L^-1. The selectivity of the fabricated electrode towards different ionic species were checked out and no serious interference was observed. At the end, the application of the designed sensor in the determination of Pb²⁺ at 10 different edible specimens were investigated and the obtained recovery values were in the range of (95.56-106.64%) indicating the successful performance of the designed sensor.

Simultaneous detection of eight phenols in food contact materials after electrochemical assistance solid-phase microextraction based on amino functionalized carbon nanotube/polypyrrole composite

An electrochemical assistance solid-phase microextraction (EA-SPME) was developed based on amino functionalized multi-walled carbon nanotube/polypyrrole (MWCNTs-NH₂/PPy) composite coating. It was applied for the extraction of eight phenols in food contact material, including 2-chlorophenol, o-cresol, m-cresol, 2,4-dichlorophenol, 4-tert-butylphenol, 4-chlorophenol, 4-tertoctylphenol and alpha-naphthol. MWCNTs-NH₂/PPy coating was characterized by scanning electron microscopy, transmission electron microscope, X-ray energy spectrometer, X-ray diffraction, Fourier transform infrared and thermogravimetric analysis. The adsorption mechanism of phenols on the composite coatings was investigated. The coating modified steel-wire as an extraction fiber has good electroconductibility, reproducibility and long service life. A determination method for the eight phenols was established by EA-SPME coupled with gas chromatography-flame ionization detection. Under the optimal experimental conditions (extraction temperature: 40 °C; extraction time: 30 min; stirring rate: 600 rpm; NaCl concentration: 0.15 g mL^-1; desorption temperature: 250 °C and desorption time: 4 min), the detection linear range was 0.005-50 μg L^-1 (R²>0.99), and the detection limit was 0.001-0.1 μg L^-1 (S/N = 3). For the quintuple analysis of 50 μg L^-1 phenols, the single fiber RSDs were 2.2-12.4%, and the fiber-to-fiber RSDs were 1.9-10.5%. The method was used to detect the migration quantity of the eight phenols from five canned packaging materials, which showed satisfactory recovery 87.3-118.9%.

In-tube solid-phase microextraction: Current trends and future perspectives

In-tube solid-phase microextraction (IT-SPME) was developed about 24 years ago as an effective sample preparation technique using an open tubular capillary column as an extraction device. IT-SPME is useful for micro-concentration, automated sample cleanup, and rapid online analysis, and can be used to determine the analytes in complex matrices simple sample processing methods such as direct sample injection or filtration. IT-SPME is usually performed in combination with high-performance liquid chromatography using an online column switching technology, in which the entire process from sample preparation to separation to data analysis is automated using the autosampler. Furthermore, IT-SPME minimizes the use of harmful organic solvents and is simple and labor-saving, making it a sustainable and environmentally friendly green analytical technique. Various operating systems and new sorbent materials have been developed to improve its extraction efficiency by, for example, enhancing its sorption capacity and selectivity. In addition, IT-SPME methods have been widely applied in environmental analysis, food analysis and bioanalysis. This review describes the present state of IT-SPME technology and summarizes its current trends and future perspectives, including method development and strategies to improve extraction efficiency.

Bioanalytical HPLC Applications of In-Tube Solid Phase Microextraction: A Two-Decade Overview

In-tube solid phase microextraction is a cutting-edge sample treatment technique offering significant advantages in terms of miniaturization, green character, automation, and preconcentration prior to analysis. During the past years, there has been a considerable increase in the reported publications, as well as in the research groups focusing their activities on this technique. In the present review article, HPLC bioanalytical applications of in-tube SPME are discussed, covering a wide time frame of twenty years of research reports. Instrumental aspects towards the coupling of in-tube SPME and HPLC are also discussed, and detailed information on materials/coatings and applications in biological samples are provided.

Competitive Protein Binding Assay of Naproxen by Human Serum Albumin Functionalized Silicon Dioxide Nanoparticles

We have developed a new competitive protein binding assay (CPBA) based on human serum albumin functionalized silicon dioxide nanoparticles (nano-SiO₂-HSA) that can be used for naproxen determination in urine. Compared with a conventional multi-well reaction plate, nano-SiO₂ with a high surface-area-to-volume ratio could be introduced as a stationary phase, markedly improving the analytical performance. Nano-SiO₂-HSA and horseradish peroxidase-labeled-naproxen (HRP-naproxen) were prepared for the present CPBA method. In this study, a direct competitive binding to nano-SiO₂-HSAwas performed between the free naproxen in the sample and HRP-naproxen. Thus, the catalytic color reactions were investigated on an HRP/3,3'5,5'-tetramethylbenzidine (TMB)/H₂O₂ system by the HRP-naproxen/nano-SiO₂-HSA composite for quantitative measurement via an ultraviolet spectrophotometer. A series of validation experiments indicated that our proposed methods can be applied satisfactorily to the determination of naproxen in urine samples. As a proof of principle, the newly developed nano-CPBA method for the quantification of naproxen in urine can be expected to have the advantages of low costs, fast speed, high accuracy, and relatively simple instrument requirements. Our method could be capable of expanding the analytical applications of nanomaterials and of determining other small-molecule compounds from various biological samples.

On-line microextraction of moxifloxacin using Fe3O4 nanoparticle-packed in-tube SPME

An in-tube SPME based on the use of a Fe₃O₄ nanoparticles-packed tube has been reported.