A fluorescence-electrochemical dual-mode aptasensor based on novel DNA-dependent PBNFs@PtPd for highly selective and sensitive detection of procymidone through hybridization chain reaction

Herein, a study for the first application of a hybridization chain reaction, a 1,8-naphthalimides-DNA (NDs) intercalator, and DNA-dependent Prussian blue nanoflowers@PtPd materials (PBNFs@PtPd) in the development of a fluorescence-electrochemical (FL-EC) aptasensor. This construction establishes an efficient sensing platform for the detection of procymidone (PCM). In the context of the described experiment, dual-mode detection is achieved through the generation of FL signals by an aptamer labeled with a Cy5 moiety and the formation of DPV signals by the modification of a thionine-appended 1,8-naphthalimide (Thi-NDs). In the presence of PCM, specific recognition occurs, followed by the utilization of magnetic separation technology to release DNA1 (S1) and aptamer-Cy5 (Apt-Cy5), subsequently introducing them onto both fluorescence and EC platforms. The presence of S1 effectively activates hybridization chain reaction (HCR) for the electrode surface, thereby significantly increasing the binding sites for Thi-NDs and consequently greatly amplifying the response signal of differential pulse voltammetry (DPV). The developed FL-EC dual-mode sensing platform demonstrates high sensitivity in the detection of PCM, with the detection limits of 0.173 μg·ml-1 (within the detection range of 500 pg·ml-1 to 500 ng·ml-1) and 0.074 ng·ml-1 (within the detection range of 100 pg·ml-1 to 100 ng·ml-1), respectively. The designed dual-mode sensor exhibits notable characteristics, including high selectivity, reproducibility, synergy, and reliable monitoring/capability for PCM in real samples.

Implantable biomedical materials for treatment of bone infection

The treatment of bone infections has always been difficult. The emergence of drug-resistant bacteria has led to a steady decline in the effectiveness of antibiotics. It is also especially important to fight bacterial infections while repairing bone defects and cleaning up dead bacteria to prevent biofilm formation. The development of biomedical materials has provided us with a research direction to address this issue. We aimed to review the current literature, and have summarized multifunctional antimicrobial materials that have long-lasting antimicrobial capabilities that promote angiogenesis, bone production, or "killing and releasing." This review provides a comprehensive summary of the use of biomedical materials in the treatment of bone infections and a reference thereof, as well as encouragement to perform further research in this field.

MOF-derived CuO@ZnO modified titanium implant for synergistic antibacterial ability, osteogenesis and angiogenesis

Surface modification of titanium implants with antibacterial, osteogenic and even angiogenic capabilities are essential to enhance their clinical applicability. Herein, metal-organic framework (MOF) derived CuO@ZnO composite was grafted onto the polydopamine (PDA) modified titanium alloy to achieve vascularized bone regeneration. The CuO@ZnO-coated titanium effectively inhibits the formation of bacterial biofilms and the sterilization rate of Staphylococcus aureus (S. aureus) reaches 99%. Benefitting from the intrinsic porous architecture of MOFs, the Zn2+ and Cu2+ could be controllably released to facilitate the production of excess intracellular reactive oxygen species (ROS) inside the bacteria, which ensures the excellent antibacterial performance of the composite coating. The CuO@ZnO-coated titanium also exhibits good cytocompatibility, effectively promotes the adhesion and proliferation of the human bone marrow mesenchymal stem cells (hBMSCs) and reduces the level of the cell apoptosis. The up-regulated expression of the osteogenesis-related genes and the superior extracellular matrix mineralization reveals that the CuO@ZnO coating possesses fantastic osteoinductive properties. In addition, the transwell and tube formation assays of the human umbilical vein endothelial cells (HUVECs) suggest the superior angiogenesis ability of the CuO@ZnO-coated titanium. The released Cu2+ stimulated the angiogenesis of the HUVECs in vitro by up-regulating the expression of the vascular endothelial growth factor (VEGF). These findings will provide new insight into the development of multifunctional titanium implants for clinical applications.

Arabinoxylan/graphene-oxide/nHAp-NPs/PVA bionano composite scaffolds for fractured bone healing

The importance of bone scaffolds has increased many folds in the last few years; however, during bone implantation, bacterial infections compromise the implantation and tissue regeneration. This work is focused on this issue while not compromising on the properties of a scaffold for bone regeneration. Biocomposite scaffolds (BS) were fabricated via the freeze-drying technique. The samples were characterized for structural changes, surface morphology, porosity, and mechanical properties through spectroscopic (Fourier transform-infrared [FT-IR]), microscopic (scanning electron microscope [SEM]), X-ray (powder X-ray diffraction and energy-dispersive X-ray), and other analytical (Brunauer-Emmett-Teller, universal testing machine Instron) techniques. Antibacterial, cellular, and hemocompatibility assays were performed using standard protocols. FT-IR confirmed the interactions of all the components. SEM illustrated porous and interconnected porous morphology. The percentage porosity was in the range of 49.75%-67.28%, and the pore size was 215.65-470.87 µm. The pore size was perfect for cellular penetration. Thus, cells showed significant proliferation onto these scaffolds. X-ray studies confirmed the presence of nanohydroxyapatite and graphene oxide (GO). The cell viability was 85%-98% (BS1-BS3), which shows no significant toxicity of the biocomposite. Furthermore, the biocomposites exhibited better antibacterial activity, no effect on the blood clotting (normal in vitro blood clotting), and less than 5% hemolysis. The ultimate compression strength for the biocomposites increased from 4.05 to 7.94 with an increase in the GO content. These exciting results revealed that this material has the potential for possible application in bone tissue engineering.

Zn-contained mussel-inspired film on Mg alloy for inhibiting bacterial infection and promoting bone regeneration

Infection and insufficient osteointegration are the main causes of orthopedic implant failure. Furthermore, activating favorable inflammation response is vital to the fast osteointegration of implants. Therefore, endowing the implants with multifunctions (antibacterial, anti-inflammation, and pro-osteointegration) is a promising strategy to improve the performance of orthopedic implants. In this study, a Zn-contained polydopamine (PDA) film was fabricated on AZ31 alloy. The film possessed a stable Zn ion release in 14 days. The results of electrochemical analysis implied the favorable corrosion protection of the film, and thus, leading to a suitable hemolysis ratio (below 1%). The in vitro antibacterial assessment revealed that the film exhibited excellent resistance against Staphylococcus aureus (nearly 100%), which can be ascribed to the release of Zn ions. The cell-culture evaluation revealed that the extract of Zn-contained PDA-coated sample can activate RAW264.7 polarization to an anti-inflammatory phenotype, as well as enhance the osteogenic differentiation ability of MC3T3-E1. Additionally, the femoral osteomyelitis model indicated that the as-prepared film had a high antibacterial capability at early stage of the implantation, and showed better osteogenesis and osteointegration after 8 weeks of implantation. With favorable antibacterial, anti-inflammation, and pro-osteogenesis abilities, the novel designed Zn-contained PDA film is promising to be used in Mg-based orthopedic implants.

Repair of segmental rabbit radial defects with Cu/Zn co-doped calcium phosphate scaffolds incorporating GDF-5 carrier

Repair of segmental bone defects is a challenge in orthopaedics. A bone substitute is a potential solution for this challenge, and angiogenesis and osteogenesis are critical to the performance of scaffold materials. For enhancing angiogenesis and osteogenesis activities of implanted scaffolds, Cu/Zn co-doped calcium phosphate scaffolds carrying GDF-5-release microspheres were prepared and implanted into surgically created critical-sized rabbit radial defects. Radiological examination, histological analysis and biomechanical tests were used to evaluate the bone healing-union. Results showed that, with increasing Cu/Zn concentrations, new bone area, new blood vessel density, and bending failure load all increased significantly. Furthermore, Cu/Zn co-doped scaffolds incorporating GDF-5-release microspheres exhibited further increased angiogenesis and osteogenesis (vs. Cu/Zn co-doped alone), as well as a superior bending failure load. These show that, simultaneous incorporation of trace essential ions and GDF-5 combines pro-angiogenic and pro-osteogenic actions of these bioactive substances, potentially offering an effective approach to assist the healing of critical-sized bone defects.

Review of titanium surface modification techniques and coatings for antibacterial applications

Implanted biomaterials play a key role in the current success of orthopedic and dental procedures. Pure titanium and its alloys are the most commonly used materials for permanent implants in contact with bone. However, implant-related infections remain among the leading reasons for failure. The most critical pathogenic event in the development of infection on biomaterials is biofilm formation, which starts immediately after bacterial adhesion. In the last decade, numerous studies reported the ability of titanium surface modifications and coatings to minimize bacterial adhesion, inhibit biofilm formation and provide effective bacterial killing to protect implanted biomaterials. In the present review, the different strategies to prevent infection onto titanium surfaces are reported: surface modification and coatings by antibiotics, antimicrobial peptides, inorganic antibacterial metal elements and antibacterial polymers. STATEMENT OF SIGNIFICANCE: Implanted biomaterials play a key role in the current success of orthopedic and dental procedures. Pure titanium and its alloys are the most commonly used materials for permanent implants in contact with bone. Microbial infection is one of the main causes of implant failure. Currently, the global infection risk is 2-5% in orthopedic surgery. Numerous solutions exist to render titanium surfaces antibacterial. The LBPS team is an expert on the functionalization of titanium surfaces by using bioactive polymers to improve the biologiocal response. In this review, the different strategies to prevent infection are reported onto titanium and titanium alloy surfaces such as surface modification by antibiotics, antimicrobial peptides, inorganic antibacterial metal elements and antibacterial polymers.

Regenerating infected bone defects with osteocompatible microspheres possessing antibacterial activity

Treatment of infected bone defects still remains a formidable clinical challenge, and the design of bone implants with both anti-bacterial activity and osteogenesis effects is nowadays regarded as a powerful strategy for infection control and bone healing.

Fabrication of a Cu/Zn co-incorporated calcium phosphate scaffold-derived GDF-5 sustained release system with enhanced angiogenesis and osteogenesis properties

Synthetic scaffolds with multifunctional properties, including angiogenesis and osteogenesis capacities, play an essential role in accelerating bone regeneration. In this study, various concentrations of Cu/Zn ions were incorporated into biphasic calcium phosphate (BCP) scaffolds, and then growth differentiation factor-5 (GDF-5)-loaded poly(lactide-co-glycolide) (PLGA) microspheres were attached onto the ion-doped scaffold. The results demonstrated that with increasing concentration of dopants, the scaffold surface gradually changed from smooth grain crystalline to rough microparticles, and further to a nanoflake film. Additionally, the mass ratio of β-tricalcium phosphate/hydroxyapatite increased with the dopant concentration. Furthermore, GDF-5-loaded PLGA microspheres attached onto the BCP scaffold surface exhibited a sustained release. In vitro co-culture of bone mesenchymal stem cells and vascular endothelial cells showed that the addition of Cu/Zn ions and GDF-5 in the BCP scaffold not only accelerated cell proliferation, but also promoted cell differentiation by enhancing the alkaline phosphatase activity and bone-related gene expression. Moreover, the vascular endothelial growth factor secretion level increased with the dopant concentration, and attained a maximum when GDF-5 was added into the ions-doped scaffold. These findings indicated that BCP scaffold co-doped with Cu/Zn ions exhibited a combined effect of both metal ions, including angiogenic and osteogenic capacities. Moreover, GDF-5 addition further enhanced both the angiogenic and osteogenic capacities of the BCP scaffold. The Cu/Zn co-incorporated BCP scaffold-derived GDF-5 sustained release system produced multifunctional scaffolds with improved angiogenesis and osteogenesis properties.

Synthesis and biological properties of Zn-incorporated micro/nano-textured surface on Ti by high current anodization

It is acknowledged that ideal implant coatings should possess micro/nano-textured surface, have good interfacial bonding, and can release bioactive elements. In this study, we fabricated a Zn-incorporated micro/nano-textured surface by one-step high current anodization (HCA) in an aqueous solution with 10g/L of NaOH and different concentrations of Zn(NO₃)₂ (4, 7, and 12g/L). The control group of Zn-free was fabricated in the electrolyte of 7g/L Zn(NO₃)₂. Scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HR-TEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and inductively coupled plasma mass spectroscopy (ICP-MS) were used to analyze the morphology, composition, microstructure, and Zn⁺ release kinetics of the micro/nano-textured coatings. The biological properties of the surface structure were evaluated by cytotoxicity assay, cell viability, cytoskeletal assembly and alkaline phosphatase activity. Our results show the micro/nano-textured surface is composed of TiO₂ mesoporous arrays, into which the Zn is demonstrated to be incorporated in the form of ZnO. The Zn content in the surface and release level of Zn²⁺ can be tailored through varying Zn(NO₃)₂ concentration in the electrolyte. In addition, the surface oxide layers show good interfacial bonding strength to the substrate. Compared with pure Ti and anodized Zn-free samples, the Zn-incorporated surface can upregulate osteoblast functions such as proliferation and alkaline phosphatase activity, which are assayed by MTT and ALP staining experiments, respectively. Collectively, this micro/nano-textured structure combined with high interfacial bonding strength and release of Zn²⁺ render the material surface promising as orthopedic implant coatings.

Highly effective Cu/Zn-carbon micro/nanofiber-polymer nanocomposite-based wound dressing biomaterial against the P. aeruginosa multi- and extensively drug-resistant strains

Pseudomonas aeruginosa (P. aeruginosa) is the most prevalent bacteria in the infections caused by burn, surgery, and traumatic injuries. Emergence of the P. aeruginosa bacterial resistance against various clinical drugs for wound treatment is the major concern nowadays. The present study describes the synthesis of the polyvinyl alcohol (PVA) and cellulose acetate phthalate (CAP) polymeric composite film (~0.2mm thickness) reinforced with the Cu/Zn bimetal-dispersed activated carbon micro/nanofiber (ACF/CNF), as a wound dressing material. The focus is on determining the efficacy of the prepared biomaterial against the multi and extensively drug-resistant P. aeruginosa strains isolated from the burning, surgical, and traumatic injury-wounds. The primary synthesis steps for the biomaterial include the mixing of a blend of CAP powder and the asymmetrically distributed Cu/Zn bimetals in ACF/CNF, into the polymerization reaction mixture of PVA. Biochemical tests showed that the prepared composite material significantly enhanced the in-vitro blood clotting rate, platelet aggregation, and macrophage cell proliferation, indicating the suitability of the material as a fast wound healer. The antibacterial tests performed against the P. aeruginosa strains showed that the material effectively suppressed the bacterial growth, with the bimetal nanoparticles dispersed in the material serving as an antibacterial agent. The PVA/CAP polymer composite served as an encapsulating agent providing a slow release of the nanoparticles, besides increasing the hemostatic properties of the biomaterial. The ACF/CNF served as a support to the dispersed bimetal nanoparticles, which also provided a mechanical and thermal stability to the material. Experimentally demonstrated to be biocompatible, the prepared metal-carbon-polymer nanocomposite in this study is an effective dressing material for the P. aeruginosa-infected wounds.

Design of alveolate Se-inserted TiO2 and its effect on osteosarcoma cells and osteoblasts

The experiments in vitro/vivo evidence that an alveolate TiO₂@Se nano-grid with controllable diameter shows good anti-tumor properties and biocompatibility.

Osteogenic activity and angiogenesis of a SrTiO3 nano-gridding structure on titanium surface

Dual effect of alveolate double-layered SrTiO₃ nano-gridding based on Ti substrate: osteogenic activity and angiogenesis.

A detailed study of homogeneous agarose/hydroxyapatite nanocomposites for load-bearing bone tissue

Agarose/hydroxyapatite (agar/HA) nanocomposites for load-bearing bone substitutes were successfully fabricated via a novel in situ precipitation method. Observation via SEM and TEM revealed that the spherical inorganic nanoparticles of approximately 50 nm were well dispersed in the organic matrix, and the crystallographic area combined closely with the amorphous area. The uniform dispersion of HA nanoparticles had prominent effect on improving the mechanical properties of the agar/HA nanocomposites (the highest elastic modulus: 1104.42 MPa; the highest compressive strength: 400.039 MPa), which proved to be potential load-bearing bone substitutes. The thermal stability of agarose and nanocomposites was also studied. The MG63 osteoblast-like cells on the composite disks displayed fusiform and polygonal morphology in the presence of HA, suggesting that the cell maturation was promoted. The results of cell proliferation and cell differentiation indicated that the cells cultured on the agar/HA composite disks significantly increased the alkaline phosphatase activity and calcium deposition. The structural role of agarose in the composite system was investigated to better understand the effect of biopolymer on structure and properties of the composites. The optimal properties were the result of a comprehensive synergy of the components.

Bidirectional regulation of zinc embedded titania nanorods: antibiosis and osteoblastic cell growth

A bifunctional regulation in antibiosis and osteoblastic cell growth is achieved by well-organized TiO₂–Zn nanoarrays.