Self-calibrating dual-sensing electrochemical sensors for accurate detection of carbon dioxide in blood

A paper-based electrochemical dual-function biosensor capable of determining pH and TCO2 was synthesized for the first time using an iridium oxide pH electrode and an all-solid-state ion electrode (ASIE). In the study, to obtain highly reliable results, the biosensor was equipped with a real-time pH correction function before TCO2 measurements. Compared to traditional liquid-filling carbon dioxide detection sensors, the utilization of ferrocene endows our novel sensor with abundant positive sites, and thus greatly improves its performance. Conversely, the introduction of MXene with conductivity close to that of metals reduces electrode resistance, which is beneficial for accelerating the electrochemical reaction of the sensor and reducing LOD. After optimization, the detection range of TCO2 is 0.095 nM-0.66 M, with a detection limit of as low as 0.023 nM. In addition, the sensor was used in real serum sample-spiked recovery experiments and comparison experiments with existing clinical blood gas analyzers, which confirmed the effectiveness of its clinical application. This study provides a method for the rational design of paper-based electrochemical biosensors and a new approach for the clinical detection of blood carbon dioxide.

Smart surfaces with reversibly switchable wettability: Concepts, synthesis and applications

As a growing hot research topic, manufacturing smart switchable surfaces has attracted much attention in the past a few years. The state-of-the-art study on reversibly switchable wettability of smart surfaces has been presented in this systematic review. External stimuli are brought about to render the alteration in chemical conformation and surface morphology to drive the wettability switch. Here, starting from the fundamental theories related to the surfaces wetting principles, highlights on different triggers for switchable wettability, such as pH, light, ions, temperature, electric field, gas, mechanical force, and multi-stimuli are discussed. Different applications that have various wettability requirement are targeted, including oil-water separation, droplets manipulation, patterning, liquid transport, and so on. This review aims to provide a deep insight into responsive interfacial science and offer guidance for smart surface engineering. It ends with a summary of current challenges, future opportunities, and potential solutions on smart switch of wettability on superwetting surfaces.

Bioinspired Metal-Intermetallic Laminated Composites for the Fabrication of Superhydrophobic Surfaces with Responsive Wettability

Hundreds of copper and titanium foils were applied to prepare biomimetic metal-intermetallic laminated composites by diffusion bonding. The cross sections of the obtained diffusion bonded bulks were etched selectively with FeCl₃ solution to get regular microarray structures. This kind of microstructure was controlled accurately and promptly by simple parameter adjustment. The etched surfaces were modified with 1-dodecanethiol, and the water contact angles (WCAs) were measured. The relationship between the microstructure and wettability of the achieved material was discussed, and the reason for the anisotropic wettability was also analyzed. Then etched surfaces were anodized in different electrolyte solutions to obtain different nanostructures. The morphology and chemical compositions of the surfaces were analyzed. The surfaces with CuO nanostructures by modification show superhydrophobicity with self-cleaning, on which the WCA and water sliding angle are 160.9° and 0.8°, respectively. The surfaces with TiO₂ nanostructures without modification show ultraviolet light-responsive wettability. After modification with 11-mercaptoundecanoic acid and 1-decanethiol, the surfaces also exhibit pH-responsive wettability. The superhydrophobic surfaces with responsive wettability have potential applications in biotechnology and microfluidics.

Controlled Movement of a Smart Miniature Submarine at Various Interfaces

Smart miniaturized aquatic devices have many important applications, but their locomotion at different interfaces remains a challenge. Here, we report a smart miniaturized submarine moving at various air/liquid or oil/water interfaces. The microsubmarine is fabricated by a CO₂-responsive superhydrophobic copper mesh and is driven by the Marangoni effect. The microsubmarine can not only transfer among different interfaces reversibly but also move horizontally at the interfaces freely. The unique locomotion of the device is attributed to a CO₂-triggered switch between superhydrophobicity and underwater superoleophobicity. Moreover, the microsubmarine exhibits good stability and excellent oil repellence at the oil/water interface. Our study provides a strategy for fabricating smart aquatic devices that have potential applications in environment monitoring, water purification, channel-free microfluidics, and so on.

Simple and Facile Approach To Create Charge Reversible Pores via Hydrophobic Anchoring of Ionic Amphiphiles

Mesoporous silica-based charge reversal systems have gained significant attention in recent years due to a variety of applications such as drug delivery, dye adsorption, catalysis, chromatography, etc. Such systems often use covalent strategies to immobilize functional groups on the silica scaffold. However, lack of dynamism, modularity, and postsynthetic flexibility associated with covalent routes limit their wider applicability. Alternatively, supramolecular routes are gaining increased attention owing to their ability to overcome these limitations. Here, we introduce a simple and facile noncovalent design for a highly reversible assembly of charged amphiphiles within mesopores. Hexyl pendant groups were covalently attached to the surface to provide hydrophobic anchoring for charged amphiphiles to enable facile switching of surface charge of the mesoporous silica. These charge-switchable surfaces were used for fast and selective adsorption of dyes from aqueous solutions.

CO2-Responsive polymer materials

This paper reviews the chemical fundamentals of CO₂-responsive polymers as well as the latest reported “smart” material systems switched by CO₂.

CO2-responsive polymeric materials: synthesis, self-assembly, and functional applications

CO2 is an ideal trigger for switchable or stimuli-responsive materials because it is benign, inexpensive, green, abundant, and does not accumulate in the system. Many different CO2-responsive materials including polymers, latexes, solvents, solutes, gels, surfactants, and catalysts have been prepared. This review focuses on the preparation, self-assembly, and functional applications of CO2-responsive polymers. Detailed discussion is provided on the synthesis of CO2-responsive polymers, in particular using reversible deactivation radical polymerization (RDRP), formerly known as controlled/living radical polymerization (CLRP), a powerful technique for the preparation of well-defined (co)polymers with precise control over molecular weight distribution, chain-end functional groups, and polymer architectural design. Self-assembly in aqueous dispersed media is highlighted as well as emerging potential applications.

Inspired smart materials with external stimuli responsive wettability: a review

Recent progress in smart surfaces with responsive wettability upon external stimuli is reviewed and some of the barriers and potentially promising breakthroughs in this field are also briefly discussed.

Amphiphilic block copolymer terminated with pyrene group: from switchable CO2-temperature dual responses to tunable fluorescence

Py-PCL-b-P(NIPAM-co-DMAEMA) micelles can present switchable CO₂-temperature dual responses and tunable fluorescence properties.