Electrophilic C(sp2)-H Cyanation with Inorganic Cyanate (OCN-) by PIII/PV=O-Catalyzed Phase Transfer Activation

An organophosphorus -catalyzed method for the direct electrophilic cyanation of C(sp2)-H nucleophiles with sodium cyanate (NaOCN) is reported. The catalytic deoxyfunctionalization of the OCN- anion is enabled by the use of a small-ring phosphacyclic (phosphetane) catalyst in combination with a terminal hydrosilane O-atom acceptor and a malonate-derived bromenium donor. In situ spectroscopy under single-turnover conditions demonstrate that insoluble inorganic cyanate anion is activated by bromide displacement on a bromophosphonium catalytic intermediate to give a reactive N-bound isocyanatophosphonium ion, which delivers electrophilic "CN+" equivalents to nucleophilic (hetero)arenes and alkenes with loss of a phosphine oxide. These results demonstrate the feasibility of deoxyfunctionalization of insoluble inorganic salts by PIII/PV=O catalyzed phase transfer activation.

Synthesis of N-Hydroxysuccinimide Esters, N-Acylsaccharins, and Activated Esters from Carboxylic Acids Using I2/PPh3

A method for the syntheses of isolable, active esters is described in which carboxylic acids are treated with triphenylphosphine, iodine, and triethylamine. Active esters accessible in this way include N-hydroxysuccinimide esters, N-hydroxyphthalimide esters (N-(acyloxy)phthalimides), N-acylsaccharins, pentafluorophenol esters, pentachlorophenol esters, N-hydroxybenzotriazole esters, and hexafluoro-2-propanol esters. The approach can be similarly applied toward the formation of N-acylsaccharins and N-acylimidazoles. The method is suitable for the formation of isolable active esters of aromatic and aliphatic activated acids as well as α-amino acid derivatives. These products are widely used reagents in organic synthesis, peptide synthesis, medicinal chemistry, and chemical biology (e.g., for bioconjugations). The method has broad substrate scope, uses simple and inexpensive reagents, avoids the use of carbodiimides or other coupling agents, and occurs at room temperature. Additionally, the diastereomers of compound Boc-Ala-NHCHPh are demonstrated to be distinguishable by 1H NMR (in DMSO-d6), allowing for a straightforward NMR method to establish the degree of racemization of activated esters of Boc-Ala or amide bond formations using Boc-Ala.

Phosphorus-Ligand Redox Cooperative Catalysis: Unraveling Four-Electron Dioxygen Reduction Pathways and Reactive Intermediates

The reduction of dioxygen to water is crucial in biology and energy technologies, but it is challenging due to the inertness of triplet oxygen and complex mechanisms. Nature leverages high-spin transition metal complexes for this, whereas main-group compounds with their singlet state and limited redox capabilities exhibit subdued reactivity. We present a novel phosphorus complex capable of four-electron dioxygen reduction, facilitated by unique phosphorus-ligand redox cooperativity. Spectroscopic and computational investigations attribute this cooperative reactivity to the unique electronic structure arising from the geometry of the phosphorus complex bestowed by the ligand. Mechanistic study via spectroscopic and kinetic experiments revealed the involvement of elusive phosphorus intermediates resembling those in metalloenzymes. Our result highlights the multielectron reactivity of phosphorus compound emerging from a carefully designed ligand platform with redox cooperativity. We anticipate that the work described expands the strategies in developing main-group catalytic reactions, especially in small molecule fixations demanding multielectron redox processes.

(3+2) Annulation of 4-Acetoxy Allenoate with Aldimine Enabled by AgF-Assisted P(III)/P(V) Catalysis

A phosphine-catalyzed (3+2) annulation of 4-acetoxy allenoate and aldimine with the assistance of AgF is described. The success of this reaction hinges on the metathesis between the enolate-phosphonium zwitterion and AgF, leading to a key intermediate comprising of silver enolate and a fluorophosphorane P(V)-moiety. The former is able to undergo a Mannich reaction with aldimine, whereas the latter initiates a cascade sequence of AcO-elimination/aza-addition, thus furnishing the P(III)/P(V) catalysis. By taking advantage of the silver enolate, a preliminary attempt at an asymmetric variant was conducted with the combination of an achiral phosphine catalyst and a chiral bis(oxazolinyl)pyridine ligand (PyBox), giving moderate enantioselectivity.

Synthesis of Macrolactams from Macrolactones Using Ru-/Ir-Catalytic System under Neutral Conditions

Herein, we report the Ru-/Ir-catalyzed synthesis of valuable macrolactams from macrolactones and esters. The ring-opening of the macrolactones was efficaciously facilitated by the Ru catalyst to generate 32 amides in the first step. In the second step, intramolecular N-alkylative ring closure of amides with alcohols was succeeded by Ir catalyst to provide a series of 22 macrolactams and gave water as a byproduct. Moreover, this approach proceeded under neutral conditions and avoided the use of external additives.

Transition Metal-Free N-S Bond Cleavage and C-N Bond Activation of Ugi-Adducts for Rapid Preparation of Primary Amides and α-Ketoamides

A novel method of transition metal-free N-S bond cleavage and subsequent C-N bond activation of Ugi-adducts was developed. Diverse primary amides and α-ketoamides were prepared in a rapid, step-economical and highly efficient manner in two steps. This strategy features excellent chemoselectivity, high yield and functional-group tolerance. Primary amides derived from the pharmaceuticals probenecid and febuxostat were prepared. This method opens a new pathway for the simultaneous synthesis of primary amides and α-ketoamides in an environmentally friendly manner.

Development of fluorous boronic acid catalysts integrated with sulfur for enhanced amidation efficiency

A thermally stable, fluorous sulfur-containing boronic acid catalyst has been developed and was shown to efficiently promote dehydrative condensation between carboxylic acids and amines under environmentally friendly conditions. The methodology can be applied to aliphatic, aromatic and heteroaromatic acids as well as primary and secondary amines. N-Boc protected amino acids were also successfully coupled in good yields with very little racemization. The catalyst could be reused four times with no significant loss of activity.

A Facile Synthetic Method for Anhydride from Carboxylic Acid with the Promotion of Triphenylphosphine Oxide and Oxaloyl Chloride

A highly efficient synthesis reaction of carboxylic anhydrides catalyzed by triphenylphosphine oxide is described for the quick synthesis of a range of symmetric carboxylic anhydrides and cyclic anhydrides under mild and neutral conditions with a high yield. The system adopts the strong reactive intermediate Ph₃PCl₂ as the catalyst of carboxylic acid salt; driven by catalytic reaction, the synthesis takes a relatively short time to complete.

Facile Amidation of Non-Protected Hydroxycinnamic Acids for the Synthesis of Natural Phenol Amides

Phenol amides are bioactive compounds naturally present in many plants. This class of compounds is known for antioxidant, anti-inflammatory, and anticancer activities. To better understand the reactivity and structure-bioactivity relationships of phenol amides, a large set of structurally diverse pure compounds are needed, however purification from plants is inefficient and laborious. Existing syntheses require multiple steps, including protection of functional groups and are generally overly complicated and only suitable for specific combinations of hydroxycinnamic acid and amine. Thus, to facilitate further studies on these promising compounds, we aimed to develop a facile general synthetic route to obtain phenol amides with a wide structural diversity. The result is a protocol for straightforward one-pot synthesis of phenol amides at room temperature within 25 h using equimolar amounts of N,N'-dicyclohexylcarbodiimide (DCC), amine, hydroxycinnamic acid, and sodium bicarbonate in aqueous acetone. Eight structurally diverse phenol amides were synthesized and fully chemically characterized. The facile synthetic route described in this work is suitable for a wide variety of biologically relevant phenol amides, consisting of different hydroxycinnamic acid subunits (coumaric acid, ferulic acid, and sinapic acid) and amine subunits (agmatine, anthranilic acid, putrescine, serotonin, tyramine, and tryptamine) with yields ranging between 14% and 24%.

Amide Bonds Meet Flow Chemistry: A Journey into Methodologies and Sustainable Evolution

Formation of amide bonds is of immanent importance in organic and synthetic medicinal chemistry. Its presence in "traditional" small-molecule active pharmaceutical ingredients, in linear or cyclic oligo- and polypeptidic actives, including pseudopeptides, has led to the development of dedicated synthetic approaches for the formation of amide bonds starting from, if necessary, suitably protected amino acids. While the use of solid supported reagents is common in traditional peptide synthesis, similar approaches targeting amide bond formation in continuous-flow mode took off more significantly, after a first publication in 2006, only a couple of years ago. Most efforts rely upon the transition of traditional approaches in flow mode, or the combination of solid-phase peptide synthesis principles with flow chemistry, and advantages are mainly seen in improving space-time yields. This Review summarizes and compares the various approaches in terms of basic amide formation, peptide synthesis, and pseudopeptide generation, describing the technological approaches and the advantages that were generated by the specific flow approaches. A final discussion highlights potential future needs and perspectives in terms of greener and more sustainable syntheses.

Biphasic electrochemical peptide synthesis

The large amount of waste derived from coupling reagents is a serious drawback of peptide synthesis from a green chemistry viewpoint. To overcome this issue, we report an electrochemical peptide synthesis in a biphasic system. Anodic oxidation of triphenylphosphine (Ph₃P) generates a phosphine radical cation, which serves as the coupling reagent to activate carboxylic acids, and produces triphenylphosphine oxide (Ph₃P Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> O) as a stoichiometric byproduct. In combination with a soluble tag-assisted liquid-phase peptide synthesis, the selective recovery of desired peptides and Ph₃PO was achieved. Given that methods to reduce Ph₃PO to Ph₃P have been reported, Ph₃PO could be a recyclable byproduct unlike byproducts from typical coupling reagents. Moreover, a commercial peptide active pharmaceutical ingredient (API), leuprorelin, was successfully synthesized without the use of traditional coupling reagents.

The large amount of waste derived from coupling reagents is a serious drawback of peptide synthesis from a green chemistry viewpoint.

Uniting Amide Synthesis and Activation by PIII/PV-Catalyzed Serial Condensation: Three-Component Assembly of 2-Amidopyridines

An organophosphorus (P^III/P^V redox) catalyzed method for the three-component condensation of amines, carboxylic acids, and pyridine N-oxides to generate 2-amidopyridines via serial dehydration is reported. Whereas amide synthesis and functionalization usually occur under divergent reaction conditions, here a phosphetane catalyst (together with a mild bromenium oxidant and terminal hydrosilane reductant) is shown to drive both steps chemoselectively in an auto-tandem catalytic cascade. The ability to both prepare and functionalize amides under the action of a single organocatalytic reactive intermediate enables new possibilities for the efficient and modular preparation of medicinal targets.

Phosphorus-Based Catalysis

Phosphorus-based organocatalysis encompasses several subfields that have undergone rapid growth in recent years. This Outlook gives an overview of its various aspects. In particular, we highlight key advances in three topics: nucleophilic phosphine catalysis, organophosphorus catalysis to bypass phosphine oxide waste, and organophosphorus compound-mediated single electron transfer processes. We briefly summarize five additional topics: chiral phosphoric acid catalysis, phosphine oxide Lewis base catalysis, iminophosphorane super base catalysis, phosphonium salt phase transfer catalysis, and frustrated Lewis pair catalysis. Although it is not catalytic in nature, we also discuss novel discoveries that are emerging in phosphorus(V) ligand coupling. We conclude with some ideas about the future of organophosphorus catalysis.

Main Group Redox Catalysis of Organopnictogens: Vertical Periodic Trends and Emerging Opportunities in Group 15

A growing number of organopnictogen redox catalytic methods have emerged-especially within the past 10 years-that leverage the plentiful reversible two-electron redox chemistry within Group 15. The goal of this Perspective is to provide readers the context to understand the dramatic developments in organopnictogen catalysis over the past decade with an eye toward future development. An exposition of the fundamental differences in the atomic structure and bonding of the pnictogens, and thus the molecular electronic structure of organopnictogen compounds, is presented to establish the backdrop against which organopnictogen redox reactivity-and ultimately catalysis-is framed. A deep appreciation of these underlying periodic principles informs an understanding of the differing modes of organopnictogen redox catalysis and evokes the key challenges to the field moving forward. We close by addressing forward-looking directions likely to animate this area in the years to come. What new catalytic manifolds can be developed through creative catalyst and reaction design that take advantage of the intrinsic redox reactivity of the pnictogens to drive new discoveries in catalysis?

Silicon compounds as stoichiometric coupling reagents for direct amidation

Despite being one of the most frequently carried out chemical reactions in industry, there is currently no amidation protocol that is regarded as safe, high yielding, environmentally friendly and inexpensive. The direct amidation of a carboxylic acid with an amine is viewed as an inherently good solution for developing such a protocol. Since the 1960s, there has been a gradual development in the use of silicon reagents for direct amidation. This review covers the methods published to April 2021 for silicon reagent mediated direct amidation of a carboxylic acid with an amine. This review also covers the use of polymeric SiO2 to promote direct amidation.

P(III)/P(V)-Catalyzed Methylamination of Arylboronic Acids and Esters: Reductive C-N Coupling with Nitromethane as a Methylamine Surrogate

The direct reductive N-arylation of nitromethane by organophosphorus-catalyzed reductive C-N coupling with arylboronic acid derivatives is reported. This method operates by the action of a small ring organophosphorus-based catalyst (1,2,2,3,4,4-hexamethylphosphetane P-oxide) together with a mild terminal reductant hydrosilane to drive the selective installation of the methylamino group to (hetero)aromatic boronic acids and esters. This method also provides for a unified synthetic approach to isotopically labeled N-methylanilines from various stable isotopologues of nitromethane (i.e., CD₃NO₂, CH₃¹⁵NO₂, and ¹³CH₃NO₂), revealing this easy-to-handle compound as a versatile precursor for the direct installation of the methylamino group.

Let's Make White Phosphorus Obsolete

Industrial and laboratory methods for incorporating phosphorus atoms into molecules within the framework of Green Chemistry are in their infancy. Current practice requires large inputs of energy, involves toxic intermediates, and generates substantial waste. Furthermore, a negligible fraction of phosphorus-containing waste is recycled which in turn contributes to negative environmental impacts, such as eutrophication. Methods that begin to address some of these drawbacks are reviewed, and some key opportunities to be realized by pursuing organophosphorus chemistry under the principles of Green Chemistry are highlighted. Methods used by nature, or in the chemistry of other elements such as silicon, are discussed as model processes for the future of phosphorus in chemical synthesis.

Microwave-assisted One-pot Synthesis of Amide Bond using WEB

Background:

Amide bond plays a key role in medicinal chemistry, and the analysis of bioactive molecular database revealed that the carboxamide group appears in more than 25% of the existing database drugs. Typically amide bonds are formed from the union of carboxylic acid and amine; however, the product formation does not occur spontaneously. Several synthetic methods have been reported for amide bond formation in literature. Present work demonstrated simple and eco-friendly amide bond formation using carboxylic acid and primary amines through in situ generation of O-acylurea. The reaction was found to be more efficient, faster reaction rate; simple work-up gave pure compound isolation in moderate to excellent yield using microwave irradiation as compared to conventional heating.

Methods:

Developed one-pot synthesis of amide compounds using agro-waste derived greener catalyst under microwave irradiation.

Results:

Twenty amide bond containing organic compounds are synthesized from carboxylic acid with primary amine catalyzed by agro-waste derived medium under microwave irradiation. First, the reaction involved carboxylic acid activation using EDC.HCl, which is the required base for the neutralization and coupling. The method employed natural agro-waste derived from banana peel ash (WEB) for the coupling gave target amide product without the use of an external organic or inorganic base.

Conclusion:

In the present work, we demonstrated that agro-waste extract is an alternative greener catalytic medium for the condensation of organic carboxylic acid and primary amine under microwave irradiation. The method found several advantages compared to reported methods like solventfree, non-toxic, cheaper catalyst, and simple reaction condition. The final isolated product achieved chromatographically pure by simple recrystallization and did not require further purification.

Pyridine-Enabled C-N Bond Activation for the Rapid Construction of Amides and 4-Pyridylglyoxamides by Cooperative Palladium/Copper Catalysis

A pyridine-enabled C-N bond activation of peptidomimetics employing cooperative palladium/copper catalysis in water is developed. Diverse amides and 4-pyridylglyoxamides are simultaneously synthesized through two steps from commercially available materials in a rapid, environmentally friendly, and high atom-economical manner.

Silver-catalyzed direct C-H oxidative carbamoylation of quinolines with oxamic acids

A silver-catalyzed efficient and direct C-H carbamoylation of quinolines with oxamic acids to access carbamoylated quinolines has been developed through oxidative decarboxylation reaction. The reaction proceeds smoothly over a broad range of substrates with excellent functional group tolerance and excellent yields under mild conditions.

An Improved PIII/PV═O-Catalyzed Reductive C-N Coupling of Nitroaromatics and Boronic Acids by Mechanistic Differentiation of Rate- and Product-Determining Steps

Experimental, spectroscopic, and computational studies are reported that provide an evidence-based mechanistic description of an intermolecular reductive C–N coupling of nitroarenes and arylboronic acids catalyzed by a redox-active main-group catalyst (1,2,2,3,4,4-hexamethylphosphetane P-oxide, i.e., 1·[O]). The central observations include the following: (1) catalytic reduction of 1·[O] to P^III phosphetane 1 is kinetically fast under conditions of catalysis; (2) phosphetane 1 represents the catalytic resting state as observed by ³¹P NMR spectroscopy; (3) there are no long-lived nitroarene partial-reduction intermediates observable by ¹⁵N NMR spectroscopy; (4) the reaction is sensitive to solvent dielectric, performing best in moderately polar solvents (viz. cyclopentylmethyl ether); and (5) the reaction is largely insensitive with respect to common hydrosilane reductants. On the basis of the foregoing studies, new modified catalytic conditions are described that expand the reaction scope and provide for mild temperatures (T ≥ 60 °C), low catalyst loadings (≥2 mol%), and innocuous terminal reductants (polymethylhydrosiloxane). DFT calculations define a two-stage deoxygenation sequence for the reductive C–N coupling. The initial deoxygenation involves a rate-determining step that consists of a (3+1) cheletropic addition between the nitroarene substrate and phosphetane 1; energy decomposition techniques highlight the biphilic character of the phosphetane in this step. Although kinetically invisible, the second deoxygenation stage is implicated as the critical C–N product-forming event, in which a postulated oxazaphosphirane intermediate is diverted from arylnitrene dissociation toward heterolytic ring opening with the arylboronic acid; the resulting dipolar intermediate evolves by antiperiplanar 1,2-migration of the organoboron residue to nitrogen, resulting in displacement of 1·[O] and formation of the target C–N coupling product upon in situ hydrolysis. The method thus described constitutes a mechanistically well-defined and operationally robust main-group complement to the current workhorse transition-metal-based methods for catalytic intermolecular C–N coupling.

Driving Recursive Dehydration by PIII/PV Catalysis: Annulation of Amines and Carboxylic Acids by Sequential C-N and C-C Bond Formation

A method for the annulation of amines and carboxylic acids to form pharmaceutically relevant azaheterocycles via organophosphorus P^III/P^V redox catalysis is reported. The method employs a phosphetane catalyst together with a mild bromenium oxidant and terminal hydrosilane reductant to drive successive C–N and C–C bond-forming dehydration events via the serial action of a catalytic bromophosphonium intermediate. These results demonstrate the capacity of P^III/P^V redox catalysis to enable iterative redox-neutral transformations in complement to the common reductive driving force of the P^III/P^V couple.

Catalytic Staudinger Reduction at Room Temperature

We report an efficient catalytic Staudinger reduction at room temperature that enables the preparation of a structurally diverse set of amines from azides in excellent yields. The reaction is based on the use of catalytic amounts of triphenylphosphine as a phosphine source and diphenyldisiloxane as a reducing agent. Our catalytic Staudinger reduction exhibits a high chemoselectivity, as exemplified by reduction of azides over other common functionalities, including nitriles, alkenes, alkynes, esters, and ketones.

Esterification by Redox Dehydration Using Diselenides as Catalytic Organooxidants

Ortho-functionalized aryl diselenides are catalytic (5.0 mol %) oxidants for the construction of esters from carboxylic acids and alcohols in the presence of stoichiometric triethyl phosphite and dioxygen in air as the terminal redox reagents (redox dehydration conditions). The reaction proceeds through the intermediacy of the anhydride and requires the presence of 10% DMAP to drive the esterification.

Organophosphorus-Catalyzed Deoxygenation of Sulfonyl Chlorides: Electrophilic (Fluoroalkyl)sulfenylation by PIII /PV =O Redox Cycling

A method for electrophilic sulfenylation by organophosphorus-catalyzed deoxygenative O-atom transfer from sulfonyl chlorides is reported. This C-S bond-forming reaction is catalyzed by a readily available small-ring phosphine (phosphetane) in conjunction with a hydrosilane terminal reductant to afford a general entry to sulfenyl electrophiles, including valuable trifluoromethyl, perfluoroalkyl, and heteroaryl derivatives that are otherwise difficult to access. Mechanistic investigations indicate that the twofold deoxygenation of the sulfonyl substrate proceeds by the intervention of an off-cycle resting state thiophosphonium ion. The catalytic method represents an operationally simple protocol using a stable phosphine oxide as a precatalyst and exhibits broad functional-group tolerance.

Phosphine Organocatalysis

The hallmark of nucleophilic phosphine catalysis is the initial nucleophilic addition of a phosphine to an electrophilic starting material, producing a reactive zwitterionic intermediate, generally under mild conditions. In this Review, we classify nucleophilic phosphine catalysis reactions in terms of their electrophilic components. In the majority of cases, these electrophiles possess carbon-carbon multiple bonds: alkenes (section 2), allenes (section 3), alkynes (section 4), and Morita-Baylis-Hillman (MBH) alcohol derivatives (MBHADs; section 5). Within each of these sections, the reactions are compiled based on the nature of the second starting material-nucleophiles, dinucleophiles, electrophiles, and electrophile-nucleophiles. Nucleophilic phosphine catalysis reactions that occur via the initial addition to starting materials that do not possess carbon-carbon multiple bonds are collated in section 6. Although not catalytic in the phosphine, the formation of ylides through the nucleophilic addition of phosphines to carbon-carbon multiple bond-containing compounds is intimately related to the catalysis and is discussed in section 7. Finally, section 8 compiles miscellaneous topics, including annulations of the Hüisgen zwitterion, phosphine-mediated reductions, iminophosphorane organocatalysis, and catalytic variants of classical phosphine oxide-generating reactions.

A General One-Pot Synthesis of 2H-Indazoles Using an Organophosphorus-Silane System

A simple and direct approach for the regioselective construction of the privileged 2H-indazole scaffold is described. The developed one-pot strategy involves phospholene-mediated N-N bond formation to access 2H-indazoles. The amount of organophosphorus reagent was minimized by recycling the phospholene oxide with organosilane reductants. Starting from functionalized 2-nitrobenzaldehydes and primary amines, a mild reductive cyclization, involving the use of commercially available phospholene oxide and silanes, delivered a wide variety of substituted 2H-indazoles in good to excellent yields.

Bridged [2.2.1] bicyclic phosphine oxide facilitates catalytic γ-umpolung addition-Wittig olefination

A novel bridged [2.2.1] bicyclic phosphine oxide, devised to circumvent the waste generation and burdens of purification that are typical of reactions driven by the generation of phosphine oxides, has been prepared in three steps from commercially available cyclopent-3-ene-1-carboxylic acid. The performance of this novel phosphine oxide was superior to those of current best-in-class counterparts, as verified experimentally through kinetic analysis of its silane-mediated reduction. It has been applied successfully in halide-/base-free catalytic γ-umpolung addition-Wittig olefinations of allenoates and 2-amidobenzaldehydes to produce 1,2-dihydroquinolines with good efficiency. One of the 1,2-dihydroquinoline products was converted to known antitubercular furanoquinolines.

Tetramethyl Orthosilicate (TMOS) as a Reagent for Direct Amidation of Carboxylic Acids

Tetramethyl orthosilicate (TMOS) is shown to be an effective reagent for direct amidation of aliphatic and aromatic carboxylic acids with amines and anilines. The amide products are obtained in good to quantitative yields in pure form directly after workup without the need for any further purification. A silyl ester as the putative activated intermediate is observed by NMR methods. Amidations on a 1 mol scale are demonstrated with a favorable process mass intensity.

A novel and highly efficient esterification process using triphenylphosphine oxide with oxalyl chloride

Triphenylphosphine oxide (TPPO) and oxalyl chloride ((COCl)2) are used as novel and high-efficiency coupling reagents for the esterification of alcohols with carboxylic acids via the TPPO/(COCl)2 system at room temperature for 1 h. The reaction represents the first TPPO-promoted esterification under mild and neutral conditions with excellent yields. Furthermore, we proposed a plausible mechanism with the help of 31P NMR spectroscopy.

Aerobic, Diselenide-Catalyzed Redox Dehydration: Amides and Peptides

At 2.5 mol % loadings using reaction temperatures between 30-55 °C, ortho-functionalized diaryl diselenides are highly effective organocatalytic oxidants for aerobic redox dehydrative amidic and peptidic bond formation using triethyl phosphite as a simple terminal reductant. This simple-to-perform organocatalytic reaction relies on the ability of selenols to react directly with dioxygen in air without recourse to metal catalysts. It represents an important step toward the development of a general, economical, and benign catalytic redox dehydration protocol.

A Multicomponent Route to Functionalized Amides and Oxazolidinones

An organobase-mediated multicomponent reaction of unactivated esters, epoxides, and amines is reported, furnishing functionalized amide derivatives. A wide range of substrates are tolerated under the reaction conditions, including chiral epoxides, which react with no erosion of enantiopurity. Facile modification of the method through replacing the ester derivative with dimethyl carbonate enables access to the corresponding oxazolidinone derivatives.

Chemoselective Reduction of Phosphine Oxides by 1,3-Diphenyl-Disiloxane

Reduction of phosphine oxides to the corresponding phosphines represents the most straightforward method to prepare these valuable reagents. However, existing methods to reduce phosphine oxides suffer from inadequate chemoselectivity due to the strength of the P=O bond and/or poor atom economy. Herein, we report the discovery of the most powerful chemoselective reductant for this transformation to date, 1,3-diphenyl-disiloxane (DPDS). Additive-free DPDS selectively reduces both secondary and tertiary phosphine oxides with retention of configuration even in the presence of aldehyde, nitro, ester, α,β-unsaturated carbonyls, azocarboxylates, and cyano functional groups. Arrhenius analysis indicates that the activation barrier for reduction by DPDS is significantly lower than any previously calculated silane reduction system. Inclusion of a catalytic Brønsted acid further reduced the activation barrier and led to the first silane-mediated reduction of acyclic phosphine oxides at room temperature.

A Biphilic Phosphetane Catalyzes N-N Bond-Forming Cadogan Heterocyclization via PIII/PV═O Redox Cycling

A small-ring phosphacycle, 1,2,2,3,4,4-hexamethylphosphetane, is found to catalyze deoxygenative N-N bond-forming Cadogan heterocyclization of o-nitrobenzaldimines, o-nitroazobenzenes, and related substrates in the presence of hydrosilane terminal reductant. The reaction provides a chemoselective catalytic synthesis of 2H-indazoles, 2H-benzotriazoles, and related fused heterocyclic systems with good functional group compatibility. On the basis of both stoichiometric and catalytic mechanistic experiments, the reaction is proposed to proceed via catalytic P^III/P^V═O cycling, where DFT modeling suggests a turnover-limiting (3+1) cheletropic addition between the phosphetane catalyst and nitroarene substrate. Strain/distortion analysis of the (3+1) transition structure highlights the controlling role of frontier orbital effects underpinning the catalytic performance of the phosphetane.

Lewis acidity quantification and catalytic activity of Ti, Zr and Al-supported mesoporous silica

Water-tolerant metal supported Lewis acids were synthesized for the catalytic amidation of electron-poor and bulky amines.