Targeting overexpressed surface proteins: A new strategy to manage the recalcitrant triple-negative breast cancer

Triple-negative breast cancer (TNBC) is an aggressive and heterogeneous cancer that lacks all three molecular markers, Estrogen, Progesterone, and Human Epidermal Growth Factor Receptor 2 (HER2). This unique characteristic of TNBC makes it more resistant to hormonal therapy; hence, chemotherapy and surgery are preferred. Active targeting with nanoparticles is more effective in managing TNBC than a passive approach. The surface of TNBC cells overexpresses several cell-specific proteins, which can be explored for diagnostic and therapeutic purposes. Immunohistochemical analysis has revealed that TNBC cells overexpress αVβ3 integrin, Intercellular Adhesion Molecule 1 (ICAM-1), Glucose Transporter 5 (GLUT5), Transmembrane Glycoprotein Mucin 1 (MUC-1), and Epidermal Growth Factor Receptor (EGFR). These surface proteins can be targeted using ligands, such as aptamers, antibodies, and sugar molecules. Targeting the surface proteins of TNBC with ligands helps harmonize treatment and improve patient compliance. In this review, we discuss the proteins expressed, which are limited to αVβ3 integrin proteins, ICAM-1, GLUT-5, MUC1, and EGFR, on the surface of TNBC, the challenges associated with the preclinical setup of breast cancer for targeted nanoformulations, internalization techniques and their challenges, suggestions to overcome the limitations of successful translation of nanoparticles, and the possibility of ligand-conjugated nanoparticles targeting these surface receptors for a better therapeutic outcome.

Controlling particle size of levan in powder form with different technologies

Levan is a fructose polysaccharide with multiple applications in different fields, but its obtaining in powdered form with a narrow particle size distribution is a complicated task. Two techniques, electrospraying and supercritical antisolvent (SAS) precipitation, were used to process levan that was first obtained enzymatically. The SAS process was able to micronize the polymer (at experimental conditions far above the mixture critical point of the solvent-antisolvent system) to obtain spherical particles between 0.30 and 0.50 μm with a proper particle size distribution. In this case, the Peng-Robinson equation of state was used to theoretically determine the mixture critical point. Bigger and elongated particles were obtained with electrospraying (0.60 μm). According to solution properties, mainly rheology, solubility and conductivity, the best solvent for levan electrospraying, in order to avoid problems of solvent evaporation and jet formation, was a mixture of water and ethanol with a polymer concentration of 50 mg·cm-3. Indeed, that solution has a viscous behavior (according to the oscillatory analysis), a low degree of pseudo-plasticity (based on the shear flow analysis), and the highest value of conductivity. Therefore, the particle size distribution of levan in powdered form can be tuned depending on the technique used.

Investigation of Levan-Derived Nanoparticles of Dolutegravir: A Promising Approach for the Delivery of Anti-HIV Drug as Milk Admixture

Nanoparticles composed of Levan and Dolutegravir (DTG) have been successfully synthesized using a spray drying procedure specifically designed for milk/food admixture applications. Levan, obtained from the microorganism Bacillus subtilis, was thoroughly characterized using MALDI-TOF and solid-state NMR technique to confirm its properties. In the present study, this isolated Levan was utilized as a carrier for drug delivery applications. The optimized spray-dried nanoparticles exhibited a smooth surface morphology with particle sizes ranging from 195 to 329 nm. In the in-vitro drug release experiments conducted in water media, the spray-dried nanoparticles showed 100 % release, whereas the unprocessed drug exhibited only 50 % release at the end of 24 h. Notably, the drug release in milk was comparable to that in plain media, indicating the compatibility. The improved dissolution rate observed for the nanoparticles could be attributed to the solid-state conversion (confirmed by XRD analysis) of DTG from its crystalline to amorphous state. The stability of the drug was verified using Fourier Transform Infra-Red Spectroscopy and Thermogravimetry-Differential Scanning Calorimetry analysis. To evaluate the in-vitro cellular toxicity, 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) assay was conducted, which revealed the CC50 value of 88.88 ± 5.10 µg/mL for unprocessed DTG and 101.08 ± 37.37 µg/mL for DTG nanoparticles. These results indicated that the toxicity of the nanoparticles was comparable to the unprocessed drug. Furthermore, the anti-HIV activity of the nanoparticles in human cell lines was found to be similar to that of the pure drug, emphasizing the therapeutic efficacy of DTG in combating HIV.

Thermostabilization of a fungal laccase by entrapment in enzymatically synthesized levan nanoparticles

In this work, we present a comprehensive investigation of the entrapment of laccase, a biotechnologically relevant enzyme, into levan-based nanoparticles (LNPs). The entrapment of laccase was achieved concomitantly with the synthesis of LNP, catalyzed by a truncated version of a levansucrase from Leuconostoc mesenteroides. The study aimed to obtain a biocompatible nanomaterial, able to entrap functional laccase, and characterize its physicochemical, kinetic and thermal stability properties. The experimental findings demonstrated that a colloidal stable solution of spherically shaped LNP, with an average diameter of 68 nm, was obtained. An uniform particle size distribution was observed, according to the polydispersity index determined by DLS. When the LNPs synthesis was performed in the presence of laccase, biocatalytically active nanoparticles with a 1.25-fold larger diameter (85 nm) were obtained, and a maximum load of 243 μg laccase per g of nanoparticle was achieved. The catalytic efficiency was 972 and 103 (μM·min)-1, respectively, for free and entrapped laccase. A decrease in kcat values (from 7050 min-1 to 1823 min-1) and an increase in apparent Km (from 7.25 μM to 17.73 μM) was observed for entrapped laccase, compared to the free enzyme. The entrapped laccase exhibited improved thermal stability, retaining 40% activity after 1 h-incubation at 70°C, compared to complete inactivation of free laccase under the same conditions, thereby highlighting the potential of LNPs in preserving enzyme activity under elevated temperatures. The outcomes of this investigation significantly contribute to the field of nanobiotechnology by expanding the applications of laccase and presenting an innovative strategy for enhancing enzyme stability through the utilization of fructan-based nanoparticle entrapments.

Expanding the horizons of levan: from microbial biosynthesis to applications and advanced detection methods

Levan, a β-(2,6)-linked fructose polymer, exhibits diverse properties that impart versatility, rendering it a highly sought-after biopolymer with various industrial applications. Levan can be produced by various microorganisms using sucrose, food industry byproducts and agricultural wastes. Microbial levan represents the most potent cost-effective process for commercial-scale levan production. This study reviews the optimization of levan production by understanding its biosynthesis, physicochemical properties and the fermentation process. In addition, genetic and protein engineering for its increased production and emerging methods for its detection are introduced and discussed. All of these comprehensive studies could serve as powerful tools to optimize levan production and broaden its applications across various industries.

An Indocyanine Green-Based Nanocluster for Imaging Orthodox Endometriosis Lesions with Negative Contrast

Indocyanine green (ICG), as the sole near-infrared dye FDA-approved, is limited in biomedical applications because of its poor photostability, lack of targeting, and rapid removal in vivo. Herein, we presented a nanoformulation of poly-l-lysine-indocyanine green-hyaluronic acid (PIH) and demonstrated that it can image orthodox endometriosis (EM) lesions with a negative contrast. The PIH nanocluster, with an average diameter of approximately 200 nm, exhibited improved fluorescence photostability and antioxidant ability compared to free ICG. In the in vivo imaging, EM lesions were visualized, featuring apparent voids and clear boundaries. After colocalizing with the green fluorescent protein, we concluded that the contrast provided by PIH peaked at 4 h postinjection and was observable for at least 8 h. The negative contrast, clear boundaries, and enhanced observable time might be due to the low permeation of PIH to lesions and the enhanced retention on the surfaces of lesions. Thus, our findings suggest an ICG-based nanoprobe with the potential to diagnose abdominal diseases.

Electrosprayable Levan-Coated Nanoclusters and Ultrasound-Responsive Drug Delivery for Cancer Therapy

In this study, we synthesized levan shell hydrophobic silica nanoclusters encapsulating doxorubicin (L-HSi-Dox) and evaluated their potential as ultrasound-responsive drug delivery systems for cancer treatment. L-HSi-Dox nanoclusters were successfully fabricated by integrating a hydrophobic silica nanoparticle-doxorubicin complex as the core and an amphiphilic levan carbohydrate polymer as the shell by using an electrospray technique. Characterization analyses confirmed the stability, size, and composition of the nanoclusters. In particular, the nanoclusters exhibited a controlled release of Dox under aqueous conditions, demonstrating their potential as efficient drug carriers. The levanic groups of the nanoclusters enhanced the targeted delivery of Dox to specific cancer cells. Furthermore, the synergism between the nanoclusters and ultrasound effectively reduced cell viability and induced cell death, particularly in the GLUT5-overexpressing MDA-MB-231 cells. In a tumor xenograft mouse model, treatment with the nanoclusters and ultrasound significantly reduced the tumor volume and weight without affecting the body weight. Collectively, these results highlight the potential of the L-HSi-Dox nanoclusters and ultrasound as promising drug delivery systems with an enhanced therapeutic efficacy for biomedical applications.

Unlocking the power of sugar: carbohydrate ligands as key players in nanotherapeutic-assisted targeted cancer therapy

Cancer cells need as much as 40-times more sugar than their normal cell counterparts. This sugar demand is attained by the excessive expression of inimitable transporters on the surface of cancer cells, driven by their voracious appetite for carbohydrates. Nanotechnological advances drive research utilizing ligand-directed therapeutics and diverse carbohydrate analogs. The precise delivery of these therapeutic cargos not only mitigates toxicity associated with chemotherapy but also reduces the grim toll of mortality and morbidity among patients. This in-depth review explores the potential of these ligands in advanced cancer treatment using nanoparticles. It offers a broader perspective beyond the usual ways we deliver drugs, potentially changing the way we fight cancer.

Traversing the diverse avenues of exopolysaccharides-based nanocarriers in the management of cancer

Exopolysaccharides are unique polymers generated by living organisms such as algae, fungi and bacteria to protect them from environmental factors. After a fermentative process, these polymers are extracted from the medium culture. Exopolysaccharides have been explored for their anti-viral, anti-bacterial, anti-tumor, and immunomodulatory effects. Specifically, they have acquired massive attention in novel drug delivery strategies owing to their indispensable properties like biocompatibility, biodegradability, and lack of irritation. Exopolysaccharides such as dextran, alginate, hyaluronic acid, pullulan, xanthan gum, gellan gum, levan, curdlan, cellulose, chitosan, mauran, and schizophyllan exhibited excellent drug carrier properties. Specific exopolysaccharides, such as levan, chitosan, and curdlan, have demonstrated significant antitumor activity. Moreover, chitosan, hyaluronic acid and pullulan can be employed as targeting ligands decorated on nanoplatforms for effective active tumor targeting. This review shields light on the classification, unique characteristics, antitumor activities and nanocarrier properties of exopolysaccharides. In addition, in vitro human cell line experiments and preclinical studies associated with exopolysaccharide-based nanocarriers have also been highlighted.

Recent Developments and Applications of Microbial Levan, A Versatile Polysaccharide-Based Biopolymer

Polysaccharides are essential components with diverse functions in living organisms and find widespread applications in various industries. They serve as food additives, stabilizers, thickeners, and fat substitutes in the food industry, while also contributing to dietary fiber for improved digestion and gut health. Plant-based polysaccharides are utilized in paper, textiles, wound dressings, biodegradable packaging, and tissue regeneration. Polysaccharides play a crucial role in medicine, pharmacy, and cosmetology, as well as in the production of biofuels and biomaterials. Among microbial biopolymers, microbial levan, a fructose polysaccharide, holds significant promise due to its high productivity and chemical diversity. Levan exhibits a wide range of properties, including film-forming ability, biodegradability, non-toxicity, self-aggregation, encapsulation, controlled release capacity, water retention, immunomodulatory and prebiotic activity, antimicrobial and anticancer activity, as well as high biocompatibility. These exceptional properties position levan as an attractive candidate for nature-based materials in food production, modern cosmetology, medicine, and pharmacy. Advancing the understanding of microbial polymers and reducing production costs is crucial to the future development of these fields. By further exploring the potential of microbial biopolymers, particularly levan, we can unlock new opportunities for sustainable materials and innovative applications that benefit various industries and contribute to advancements in healthcare, environmental conservation, and biotechnology.

Rational design of a self-assembly promoting fusion domain enhances high molecular weight levan synthesis by levansucrase SacB

The catalytic product of levansucrase from Bacillus subtilis (SacB) is mainly composed of 10 % high molecular weight levan (HMW, ~2000 kDa) and 90 % low molecular weight levan (LMW, ~7000 Da). In order to achieve efficient production of food hydrocolloid, high molecular weight levan (HMW), with the help of molecular dynamics simulation software, a protein self-assembly element, Dex-GBD, was found and fused with the C-terminus of SacB to construct a novel fusion enzyme, SacB-GBD. The product distribution of SacB-GBD was reversed compared with SacB, and the proportion of HMW in the total polysaccharide was significantly increased to >95 %. We then confirmed that the self-assembly was responsible for the reversal of the SacB-GBD product distribution by the simultaneous modulation of SacB-GBD particle size and product distribution by SDS. The hydrophobic effect may be the main driver of self-assembly as analyzed by molecular simulations and hydrophobicity determination. Our study provides an enzyme source for the industrial production of HMW and provides a new theoretical basis for guiding the molecular modification of levansucrase towards the size of the catalytic product.

Exopolysaccharides Producing Bacteria: A Review

Bacterial exopolysaccharides (EPS) are essential natural biopolymers used in different areas including biomedicine, food, cosmetic, petroleum, and pharmaceuticals and also in environmental remediation. The interest in them is primarily due to their unique structure and properties such as biocompatibility, biodegradability, higher purity, hydrophilic nature, anti-inflammatory, antioxidant, anti-cancer, antibacterial, and immune-modulating and prebiotic activities. The present review summarizes the current research progress on bacterial EPSs including their properties, biological functions, and promising applications in the various fields of science, industry, medicine, and technology, as well as characteristics and the isolation sources of EPSs-producing bacterial strains. This review provides an overview of the latest advances in the study of such important industrial exopolysaccharides as xanthan, bacterial cellulose, and levan. Finally, current study limitations and future directions are discussed.

Recent advances in natural small molecules as drug delivery systems

Drug delivery systems (DDSs) are a multidisciplinary approach toward the effective delivery of drugs to their target sites. Natural small molecule (NSM) compounds with anticancer activity, self-assembly and co-assembly functions show great potential for application as novel DDSs in the biomedical field. NSMs are widely sourced, have many modification sites, and readily form hydrogen bonds, π-π interactions, van der Waals interactions, and other non-covalent bonds in solvents, resulting in ordered structures. Moreover, their good biocompatibility and bioactivity allow compositions based on these compounds to be used in life science applications such as tissue engineering, drug delivery and cell imaging, showing the potential medical value of NSMs as DDSs. In this review, we summarise the role, assembly principles and applications of natural products such as triterpenoids, diterpenoids, sterols, alkaloids and polysaccharides in the construction of small molecule systems, which are expected to provide an important reference for the development of more active natural nanomaterials and the study of single or multi-component interactions.

Levan nanoparticles with intrinsic CD44-targeting ability for tumor-targeted drug delivery

Existing anticancer therapeutics exhibit short half-lives, non-specificity, and severe side effects. To address this, active-targeting nanoparticles have been developed; however, the complex fabrication procedures, scale-up, and low reproducibility delay FDA approval, particularly for functionalized nanoparticles. We developed levan nanoparticles via simple one-pot nanoprecipitation for specific anticancer drug delivery. Levan is a plant polysaccharide which has a binding affinity to CD44 receptors and amphiphilicity. The nanoparticles are self-assembled and enable active-targeting without chemical modifications. The paclitaxel-loaded levan nanoparticles (PTX@LevNP) demonstrated a sustained PTX release and long-term stability. The LevNP can bind CD44 receptors on cancer cells, and PTX@LevNP showed enhanced anticancer activity in CD44-positive cells (SCC7 cells). In SCC7 tumor-bearing mice, the accumulation of LevNP in tumor tissue was 3.7 times higher than that of the free-dye, resulting in improved anticancer efficacy of PTX@LevNP. This new strategy using levan can produce nanoparticles for effective cancer treatment without complex fabrication procedures.

Proteinoid Polymers and Nanocapsules for Cancer Diagnostics, Therapy and Theranostics: In Vitro and In Vivo Studies

Proteinoids-simple polymers composed of amino acids-were suggested decades ago by Fox and coworkers to form spontaneously by heat. These special polymers may self-assemble in micrometer structures called proteinoid microspheres, presented as the protocells of life on earth. Interest in proteinoids increased in recent years, in particular for nano-biomedicine. They were produced by stepwise polymerization of 3-4 amino acids. Proteinoids based on the RGD motif were prepared for targeting tumors. Nanocapsules form by heating proteinoids in an aqueous solution and slowly cooling to room temperature. Proteinoid polymers and nanocapsules suit many biomedical applications owing to their non-toxicity, biocompatibility and immune safety. Drugs and/or imaging reagents for cancer diagnostic, therapeutic and theranostic applications were encapsulated by dissolving them in aqueous proteinoid solutions. Here, recent in vitro and in vivo studies are reviewed.

Small molecules as cancer targeting ligands: Shifting the paradigm

Conventional chemotherapeutics exploration is hampered due to their nonspecific distribution leading to unintended serious toxicity. Toxicity is so severe that deciding to go for chemotherapy becomes a question of concern for many terminally ill cancer patients. However, with evolving times nanotechnology assisted in reducing the haywire distribution and channelizing the movement of drug-enclosing drug delivery systems to cancer cells to a greater extent, yet toxicity issues still could not be obliterated. Thus, active targeting appeared as a refuge, where ligands actively or specifically deliver linked chemotherapeutics and carriers to cancer cells. For a very long time, large molecule weight/macromolecular ligands (peptides and big polymers) were considered the first choice for ligand-directed active cancer targeting, due to their specificity towards overexpressed native cancer receptors. However, complex characterization, instability, and the expensive nature demanded to reconnoitre better alternatives for macromolecule ligands. The concept of small molecules as ligands emerged from the idea that few chemical molecules including chemotherapeutics have a higher affinity for cancer receptors, which are overexpressed on cell membranes, and may have the ability to assist in drug cellular uptake through endocytosis. But now the question is, can they assist the conjugated macro cargos to enter the cell or not? This present review will provide a holistic overview of the small molecule ligands explored till now.

Synthesis of Cationic Quaternized Nanolevan Derivative for Small Molecule and Nucleic Acid Delivery

Levan is a biopolymer composed of fructose chains covalently linked by β−2,6 glycosidic linkages. This polymer self−assembles into a nanoparticle of uniform size, making it useful for a wide range of applications. Also, levan exhibits various biological activities such as antioxidants, anti-inflammatory, and anti-tumor, that make this polymer very attractive for biomedical application. In this study, levan synthesized from Erwinia tasmaniensis was chemically modified by glycidyl trimethylammonium chloride (GTMAC) to produce cationized nanolevan (QA-levan). The structure of the obtained GTMAC−modified levan was determined by FT-IR, 1H-NMR and elemental (CHN) analyzer. The size of the nanoparticle was calculated using the dynamic light scattering method (DLS). The formation of DNA/QA-levan polyplex was then investigated by gel electrophoresis. The modified levan was able to increase the solubility of quercetin and curcumin by 11-folds and 205-folds, respectively, compared to free compounds. Cytotoxicity of levan and QA−levan was also investigated in HEK293 cells. This finding suggests that GTMAC−modified levan should have a potential application for drug and nucleic acid delivery.

Co-production of levan with other high-value bioproducts: A review

Levan is a homopolysaccharide of fructose that has both scientific and industrial importance, with various applications in health, pharmaceutical, cosmetic and food industries. Despite its broad spectrum of uses, there are only a limited number of commercial levan sources due to the high costs related to its production. To make production economically viable, efforts have been concentrated on the selection of levan-producing microorganisms, the genetic manipulation of new strains, and the use of inexpensive agro-industrial byproducts as substrates. Another efficient strategy involves the concomitant synthesis of other products with high market value and as such, the successful co-production of levan was demonstrated with fructooligosaccharides, ethanol, sorbitol, poly-ε-lysine, poly-γ-glutamic acid and polyhydroxyalkanoates. This paper offers a systematic review of important aspects regarding recent strategies involving the simultaneous synthesis of levan and other bioproducts of aggregate value reported to date and discusses the challenges and opportunities for its large-scale production and applications.

Nano-Based Drug Delivery of Polyphenolic Compounds for Cancer Treatment: Progress, Opportunities, and Challenges

Polyphenols and their derivates, a kind of natural product distributed in herb plants, vegetables, and fruits, are the most abundant antioxidants in the human diet and have been found to display cancer-preventative effects in several epidemiological studies. The scientific community has also validated the anti-cancer bioactivities and low toxicities of polyphenolic compounds, including flavones, tannins, phenolic acids, and anthocyanins, through in vitro and in vivo studies. However, the low stability, weak targeting ability, poor solubility, and low bioavailability of pure polyphenolic agents have significantly impaired their treatment efficacy. Nowadays, nano-based technology has been applied to surmount these restrictions and maximize the treatment efficacy of polyphenols. In this review, we summarize the advantages and related mechanisms of polyphenols in cancer treatment. Moreover, aiming at the poor solubility and low bioavailability of pure polyphenols in vivo, the advantages of nano-based delivery systems and recent research developments are highlighted. Herein, particular emphasis is mainly placed on the most widely used nanomaterials in the delivery of natural products, including liposomes, micelles, and nanogels. Finally, we present an overview and the challenges of future implementations of nano-based delivery systems of polyphenolic compounds in the cancer therapeutic field.

The anticancer activity of doxorubicin-loaded levan-functionalized gold nanoparticles synthesized by laser ablation

Here, gold nanoparticles (AuNPs) were synthesized upon exposure to nano-pulsed Nd-YAG laser irradiation in de-ionized water (PLAL) and functionalized with levan polysaccharide for assessing the anticancer efficacy of doxorubicin (DOX)-conjugated levan-capped AuNPs complexes to MCF-7 breast cancer cells. According to the physicochemical test results, the increments in levan amount enhanced the colloidal stability and the drug encapsulation efficiency (DEE) significantly. For the 10L-AuNP group having the highest levan amount (10 mg/mL levan), DEE was calculated as 92.21 ± 0.56%. The lean levan, uncapped AuNPs, and 10L-AuNP were found non-cytotoxic (>80% cell viability) in the studied concentrations with 48 h MTT assays. At higher DOX loadings (25, 50, and 100 μg/mL) of 10L-AuNP, the cell viability reduced significantly compared to free DOX. Overall, these nanoparticle complexes could be proposed as potent drug delivery vehicles for cancer drugs such as DOX, as well as other drugs in the prospective studies.

Polylactide nanoparticles encapsulating indocyanine green for photothermal therapy of prostate cancer cells

BACKGROUND

The aim of this study is to investigate the in vitro phototherapeutic potential of indocyanine green (ICG) loaded polylactide (PLA) nanoparticles on prostate cancer cells. Many attempts at designing drug delivery systems against cancer were made that incorporates ICG as a photothermal, photodynamic or imaging agent. However, most of these systems contain at least one more drug, making it hard to assess the effects of ICG alone.

METHODS

Nanoparticles (ICGNP) were prepared via nanoprecipitation. The effects of phase volume ratio and ICG concentration on size, loading capacity and encapsulation efficiency were explored. Photothermal and photodynamic properties of ICGNP were examined. PC-3 cells were used for cell viability tests. Irradiation was achieved via custom built 809-nm computer controlled diode laser at 1 W/cm² (up to 600 J/cm²). Data were analyzed by ANOVA followed by Tukey's test (p ≤ 0.05).

RESULTS

ICGNP exhibited mean size of 300 nm with low polydispersity, and zeta potential of -14 mV. Upon laser irradiation, ICGNP were capable of causing temperature increase and producing singlet oxygen. On PC-3 cells, ICGNP were proved to be as effective as free ICG in inducing cell death. The measured temperature increase in culture medium and experiments with singlet oxygen quenchers suggest that the decrease in cell viability was mainly the result of photothermal action.

CONCLUSIONS

ICGNP was effective as a photothermal agent on PC-3 cells but further improvements are required to increase ICG loading capacity for it to be useful on a wide range of cell types.

Levan enhanced the NF-κB suppression activity of an oral nano PLGA-curcumin formulation in breast cancer treatment

Chemoresistance (CR) is one of the reasons why chemotherapy agents like Gemcitabine (GMC) remain insufficient in healing breast cancer. Activation of Nuclear Factor-kappa B (NF-κB) during chemotherapy is known as an important factor in the development of CR. The hydrophobic polyphenol curcumin is shown to inhibit NF-κB and hence CR. The aim of this work was to increase the poor bioavailability of curcumin by loading it into the nano-micelles made of Poly (Lactide-co-Glycolide) (PLGA) and levan, where levan as a natural fructose homopolymer makes the nano-micelle more stable and increases its uptake using the fructose moieties. In this study, a PLGA-levan-curcumin formulation (PLC) was designed and characterized. The size was measured as 154.16 ± 1.45 nm with a 67.68% encapsulation efficiency (EE%). The incorporation between the components was approved. Levan made the nano-micelles stable for at least three months, increased their uptake, and led to a 10,000-fold increase in the solubility of curcumin. The enhanced bioavailability of curcumin reduced the NF-κB levels elevated by GMC, both in vitro and in vivo. The PLC showed a complete tumor treatment, while GMC only showed a rate of 52%. These point to the great potential of the PLC to be used simultaneously with chemotherapy.

Resveratrol-Loaded Levan Nanoparticles Produced by Electrohydrodynamic Atomization Technique

Considering the significant advances in nanostructured systems in various biomedical applications and the escalating need for levan-based nanoparticles as delivery systems, this study aimed to fabricate levan nanoparticles by the electrohydrodynamic atomization (EHDA) technique. The hydrolyzed derivative of levan polysaccharide from Halomonas smyrnensis halophilic bacteria, hydrolyzed Halomonas levan (hHL), was used. Nanoparticles were obtained by optimizing the EHDA parameters and then they were characterized in terms of morphology, molecular interactions, drug release and cell culture studies. The optimized hHL and resveratrol (RS)-loaded hHL nanoparticles were monodisperse and had smooth surfaces. The particle diameter size of hHL nanoparticles was 82.06 ± 15.33 nm. Additionally, release of RS from the fabricated hHL nanoparticles at different pH conditions were found to follow the first-order release model and hHL with higher RS loading showed a more gradual release. In vitro biocompatibility assay with human dermal fibroblast cell lines was performed and cell behavior on coated surfaces was observed. Nanoparticles were found to be safe for healthy cells. Consequently, the fabricated hHL-based nanoparticle system may have potential use in drug delivery systems for wound healing and tissue engineering applications and surfaces could be coated with these electrosprayed particles to improve cellular interaction.

Synthesis and Characterization of Poly(RGD) Proteinoid Polymers and NIR Fluorescent Nanoparticles of Optimal d,l-Configuration for Drug-Delivery Applications-In Vitro Study

RGD sequence is a tripeptide composed of three amino acids: arginine (R), glycine (G), and aspartic acid (D). The RGD peptide has a high affinity to the integrin alpha v beta 3, which is overexpressed on the membrane of many cancer cells and is attracted to areas of angiogenesis. Proteinoids are biodegradable polymers based on amino acids which are formed by bulk thermal step-growth polymerization mechanism. Hollow proteinoid nanoparticles (NPs) may be formed via self-assembly process of the proteinoid polymers. We propose using novel RGD-based proteinoid polymers to manufacture NPs in which the RGD motif is self-incorporated in the proteinoid backbone. Such P(RGD) NPs can act both as a drug carrier (by encapsulation of a desired drug) and as a targeting delivery system. This article presents the synthesis of four RGD proteinoids with different RGD optical configurations, (d) or (l) arginine, glycine, and (d) or (l) aspartic acid, in order to determine which configuration is optimal as a drug-targeting carrier. These new RGD proteinoid polymers possess high molecular weights and molecular weight monodispersity. Homonuclear nuclear magnetic resonance methods were employed to predict the expected concentration of RGD tripeptide sequence in the polymer. Near infrared fluorescent NPs have been prepared by the encapsulation of indocyanine green (ICG) dye within the different P(RGD) NPs. The dry diameters of the hollow P(R^dGD^d), P(R^dGD), P(RGD), and P(RGD^d) NPs are 55 ± 13, 48 ± 9, 45 ± 11, and 42 ± 9 nm, respectively, whereas those of the ICG-encapsulated NPs were significantly higher, 141 ± 24, 95 ± 13, 86 ± 11, and 87 ± 12 nm, respectively. The ICG-encapsulated P(R^dGD) NPs exhibited higher selectivity toward epithelial injury, as demonstrated using an in vitro scratch assay, because the P(R^dGD) NPs accumulated in the injured area at higher concentrations when compared to other P(RGD) NPs with different chiralities. Therefore, the P(R^dGD) polymer configuration is the polymer of choice for use as a targeted drug carrier to areas of angiogenesis, such as in tumors, wounds, or cuts.

Microbial Exopolysaccharides as Drug Carriers

Microbial exopolysaccharides are peculiar polymers that are produced by living organisms and protect them against environmental factors. These polymers are industrially recovered from the medium culture after performing a fermentative process. These materials are biocompatible and biodegradable, possessing specific and beneficial properties for biomedical drug delivery systems. They can have antitumor activity, they can produce hydrogels with different characteristics due to their molecular structure and functional groups, and they can even produce nanoparticles via a self-assembly phenomenon. This review studies the potential use of exopolysaccharides as carriers for drug delivery systems, covering their versatility and their vast possibilities to produce particles, fibers, scaffolds, hydrogels, and aerogels with different strategies and methodologies. Moreover, the main properties of exopolysaccharides are explained, providing information to achieve an adequate carrier selection depending on the final application.

Indocyanine Green Nanoparticles: Are They Compelling for Cancer Treatment?

Indocyanine green (ICG) is a Food and Drug Administration–approved near-infrared fluorescent dye, employed as an imaging agent for different clinical applications due to its attractive physicochemical properties, high sensitivity, and safety. However, free ICG suffers from some drawbacks, such as relatively short circulation half-life, concentration-dependent aggregation, and rapid clearance from the body, which would confine its feasible application in oncology. Here, we aim to discuss encapsulation of ICG within a nanoparticle formulation as a strategy to overcome some of its current limitations and to enlarge its possible applications in cancer diagnosis and treatment. Our purpose is to provide a short but exhaustive overview of clinical outcomes that these nanocomposites would provide, discussing opportunities, limitations, and possible impacts with regard to the main clinical needs in oncology.

Fabrication and Application of Levan-PVA Hydrogel for Effective Influenza Virus Capture

To prevent the transmission of pathogenic microorganisms such as the influenza virus, efficient pathogen-capturing materials are required. Here, we report a new pathogen-capturing and recovery material using levan polysaccharide. We fabricated hydrogels by blending levan and poly(vinyl alcohol) (PVA) and by using glutaraldehyde as a cross-linking agent. Fabricated levan-PVA hydrogels have a high water solubility and water adsorption ability. SEM observations showed that levan-PVA hydrogels have a 3D porous structure. We confirmed by RT-PCR analysis that the influenza virus capture efficiency of levan-PVA hydrogels is higher than that of commercial cotton swabs. Moreover, we confirmed that levan-PVA hydrogels on gauze as a filter material effectively captured bioaerosol samples. Therefore, levan-PVA hydrogels are expected to serve as simple and efficient pathogen capture and recovery materials.

Levan-based nanostructured systems: An overview

Bacterial levan is a fructose homopolymer that offers great potential in biotechnological applications due to biocompatibility, biodegradability and non-toxicity. This biopolymer possesses diverse multifunctional features, which translates into a wide range of applicability, including in industry, consumer products, pharmaceuticals and biomedicine. Extensive research has identified great potential for its exploitation in human health. In addition, nanostructured systems have provided significant advances in the area of health, mainly with respect to disease diagnosis and treatment. While the functional properties of these natural polysaccharide-based polymers are desirable in these systems, research in this area has been limited to few natural polymers, such as chitosan, alginate and dextran, which obscures the true potential of levan in the production of nanostructured systems for biotechnological and medical applications. The present review considers the latest research in the field to focus on the use of levan as a promising biopolymer for the development of nanomaterials.

Colloidal stability and biological activity evaluation of microbial exopolysaccharide levan-capped gold nanoparticles

The main objectives of this study were to explore the suitability of the exopolysaccharide levan, biosynthesized by Bacillus subtilis, to aid in the formation of gold nanoparticles (AuNPs) and to investigate the colloidal stability and in vitro biological activity of this biopolymer-AuNPs complex. AuNPs (mainly spherical, 8-10 nm-sized, and monodispersed) were successfully synthesized in levan concentrations up to 0.5% w/v (L-AuNP0.5) while exposed to ultraviolet C (UVC) irradiation. The increase of levan quantity decreased the size of AuNPs according to Transmission Electron Microscopy (TEM) images and enhanced the colloidal stability significantly. The presence of L-AuNP0.5 at the highest treatment dose (1000 μg/mL) exhibited substantial cytotoxicity towards L-929 mouse fibroblasts for all incubation periods. Dose-dependent toxicity was observed for the first day while, after this threshold value, medium (100 μg/mL) and the lowest (10 μg/mL) treatment doses were non-cytotoxic during 7 days of incubation, implying dose and time-independent cell viabilities (> 95%) compared to the negative control (complete cell culture medium). There occurred a special surface interaction with cells and L-AuNP0.5, especially when the cells were subjected to deliberate starvation periods to increase L-AuNP0.5 internalization via passive and active endocytosis. Scanning Electron Microscopy (SEM) images showed high accumulation of L-AuNP0.5 around or inside the cell membrane after 7 days. Overall, this attribute (high uptake of L-AuNP0.5) could make them promising candidates for prospective cancer therapeutics or drug delivery systems by enabling the cell internalization of anticancer drugs.

Supercritical carbon dioxide techniques for processing microbial exopolysaccharides used in biomedical applications

Microbial exopolysaccharides are polymers that show a great potential for biomedical applications, such as tissue engineering applications and drug delivery, due to their biocompatibility, biodegradability and their gelling properties. These polysaccharides are obtained from a microorganism culture with a relatively straightforward downstream process thanks to their extracellular character, and can be processed to obtain aerogels, fibers and micro- or nano-particles with conventional techniques. However, these techniques present several disadvantages in that they involve time-consuming processes and the use of toxic solvents. Supercritical carbon dioxide techniques can overcome these drawbacks, but their use for processing microbial exopolysaccharides is not extended in the scientific community. This review describes the most frequently used exopolysaccharides in biomedical applications and how they can be obtained, as well as the different supercritical carbon dioxide techniques that can be used for processing them and their challenges. Specifically, high pressure shows a great potential to process and sterilize exopolysaccharide biomaterials for biomedical applications (e.g. tissue engineering or drug delivery systems) in spite of the disadvantage concerning the hydrophilicity of this type of polymers.

Engineering of NIR fluorescent PEGylated poly(RGD) proteinoid polymers and nanoparticles for drug delivery applications in chicken embryo and mouse models

Proteinoids are non-toxic biodegradable polymers based on thermal step-growth polymerization of natural or synthetic amino acids. Hollow proteinoid nanoparticles (NPs) may then be formed via a self-assembly process of the proteinoid polymers in an aqueous solution. In the present article polymers and NPs based on d-arginine, glycine and l-aspartic acid, poly(R^DGD), were synthesized for tumor targeting, particularly due to the high affinity of the RGD motif to areas of angiogenesis. Near IR fluorescent P(R^DGD) NPs were prepared by encapsulating the fluorescent NIR dye indocyanine green (ICG) within the formed P(R^DGD) NPs. Here, we investigate the effect of the covalent conjugation of polyethylene glycol (PEG), with different molecular weights, to the surface of the near IR encapsulated P(R^DGD) NPs on the release of the dye to human serum due to bio-degradation of the proteinoid NPs and on the uptake by tumors. This work illustrates that the release of the encapsulated ICG from the non-PEGylated NPs is significantly faster than for that observed for the PEGylated NPs, and that the higher molecular weight is the bound PEG spacer the slower is the dye release profile. In addition, in a chicken embryo model, the non-PEGylated ICG-encapsulated P(R^DGD) NPs exhibited a higher uptake in the tumor region in comparison to the PEGylated ICG-encapsulated P(R^DGD) NPs. However, in a tumor xenograft mouse model, which enables a prolonged experiment, the importance of the PEG is clearly noticeable, when a high concentration of PEGylated P(R^DGD) NPs was accumulated in the area of the tumor compared to the non-PEGylated P(R^DGD). Moreover, the length of the PEG chain plays a major role in the ability to target the tumor. Hence, we can conclude that selectivity towards the tumor area of non-PEGylated and the PEGylated ICG-encapsulated P(R^DGD) NPs can be utilized for targeting to areas of angiogenesis, such as in the cases of tumors, wounds or cuts, etc.

Synthesis of NIR/ICG PEGylated poly(R^DGD) proteinoid NPs and their drug delivery towards mCherry-labeled 4T1 tumor.

Bacillus licheniformis levan as a functional biopolymer in topical drug dosage forms: From basic colloidal considerations to actual pharmaceutical application

Ongoing demand in sustainable and biocompatible drug dosage forms is reflected in the search for novel pharmaceutical excipients with equal properties. A group of microbial exopolysaccharides offers a variety of biopolymers with many alleged uses and effects. This study aims to assess applicative properties of levan obtained from Bacillus licheniformis NS032, focusing on its potential co-stabilizing and drug release-controlling functions in pertaining emulsion systems. Despite its high molecular weight and partial existence in globular nanometric structures (180-190 nm), levan was successfully incorporated into both tested colloidal systems: those stabilized with synthetic/anionic or natural-origin/non-ionic emulsifiers. In the tested levan concentrations range (0.2-3.0% w/w) the monitored flow and thermal parameters failed to show linear concentration dependence, which prompted us to revisit certain colloidal fundamentals of this biopolymer. Being a part of the external phase of the investigated emulsion systems, levan contributed to formation of a matrix-like environment, offering additional stabilization of the microstructure and rheology modifying properties (hysteresis loop elevation as high as 4167±98 to 20792±3166 Pa•s^-1), especially in case of the samples where lamellar liquid crystalline formation occurred. Apart from its good water solubility and considerable conformational flexibility, the investigated homofructan easily saturated the external phase of the samples stabilized with a conventional anionic emulsifier, leading to similar properties of 0.2% and 3.0% levan-containing samples. After closer consideration of thermal and release behavior, this was considered as a favorable property for a novel excipient, offering tailored formulation characteristics even with lower levan concentrations, consequently not compromising the potential cost of the final drug dosage form.

A comprehensive study on levan nanoparticles formation: Kinetics and self-assembly modeling

Levan nanoparticles formation is a complicated phenomenon involving simultaneously polymeric reaction kinetics and nanoparticles self-assembly theory. These phenomena are studied in this work with experimental and computational methodologies. Specifically, the effect of different parameters on levan kinetics and nanoparticles production in a cell-free system environment have been studied. Results point out that 37 °C is the best temperature for synthesizing levan as well as the existence of a substrate inhibition effect for polymeric reaction. This work also highlights that raffinose can be used for producing and that an increase on the ratio enzyme-substrate increases the velocity of conversion. However, the previous experimental conditions did not produce an important effect on self-assembly formed levan nanoparticles (always 110 nm) as long as the required levan concentration (CAC) for nanoparticles reorganization is achieved. To have a better understanding of these results, a model was developed to explain numerically levan kinetics and nanoparticle self-assembly. This model was built by taking into account enzyme poisoning effect (also demonstrated experimentally) and a diffusion limited cluster model for the aggregation phenomenon. Simulation results fit properly experimental data and catalytic parameters as well as predicting accurately the value of CAC for producing its reorganization into nanoparticles by self-assembly.

Efficient production of levan using a recombinant yeast Saccharomyces cerevisiae hypersecreting a bacterial levansucrase

Levan is a fructose polymer with diverse applications in the food and medical industries. In this study, levansucrase from Rahnella aquatilis (RaLsrA) was hyper-secreted using a Saccharomyces cerevisiae protein secretion system. An optimal secretion signal, a translation fusion partner (TFP) containing an N-terminal 98 amino acid domain from a mitochondrial inner membrane protein, UTH1, was employed to secrete approximately 50 U/mL of bioactive RaLsrA into culture media with 63% secretion efficiency by fed-batch fermentation. Although the purified RaLsrA was useful for enzymatic conversion of high-molecular-weight levan of approximately 3.75 × 10⁶ Da, recombinant yeast secreting RaLsrA could produce levan more efficiently by microbial fermentation. In a 50-L scale fermenter, 76-g/L levan was directly converted from 191-g/L sucrose by recombinant yeast cells, attaining an 80% conversion yield and 3.17-g/L/h productivity. Thus, we developed a cost-effective and industrially applicable production system for food-grade levan.

Acid-Triggered in Situ Aggregation of Gold Nanoparticles for Multimodal Tumor Imaging and Photothermal Therapy

Photothermal agents with high photothermal transfer efficiencies in the near-infrared (NIR) region are important for enhanced photothermal therapy (PTT) of tumors. Herein, we developed a strategy for the acid-triggered in situ aggregation of a system based on peptide-conjugated gold nanoparticles (GNPs). In an acidic environment, the GNPs formed large aggregates in solution, in cell lysates, and in tumor tissues, as observed by transmission electron microscopy (TEM). As a consequence of the aggregation, their UV-vis absorbance in the NIR region was greatly increased, and laser irradiation of the GNPs resulted in a dramatic increase in the temperatures of solutions and tumors that contained the GNP system. When exposed to NIR irradiation, the aggregates formed by the GNP system under acidic conditions were capable of producing a sufficient level of hyperthermia to destroy cancer cells both in vitro and in vivo. Interestingly, the GNP aggregates showed enhanced properties in multiple imaging modalities, including computed tomography (CT), photoacoustic (PA), and photothermal (PT) imaging. Thus, we have developed a novel probe for enhanced multimodal tumor imaging. These findings prove that a strategy involving the acid-triggered in situ aggregation of a GNP system can increase the photothermal transfer efficiency for low to high energy conversion, thus boosting the therapeutic specificity and antitumor efficacy of PTT and facilitating multimodal imaging.

Nanomedicine applications in women's health: state of the art

State-of-the-art applications of nanomedicine have the potential to revolutionize the diagnosis, prevention, and treatment of a range of conditions and diseases affecting women’s health. In this review, we provide a synopsis of potential applications of nanomedicine in some of the most dominant fields of women’s health: mental health, sexual health, reproductive medicine, oncology, menopause-related conditions and dementia. We explore published studies arising from in vitro and in vivo experiments, and clinical trials where available, to reveal novel and highly promising therapeutic applications of nanomedicine in these fields. For the first time, we summarize the growing body of evidence relating to the use of nanomaterials as experimental tools for the detection, prevention, and treatment of significant diseases and conditions across the life course of a cisgender woman, from puberty to menopause; revealing the far-reaching and desirable theoretical impact of nanomedicine across different medical disciplines. We also present an overview of potential concerns regarding the therapeutic applications of nanomedicine and the factors currently restricting the growth of applied nanomedicine.

An injectable and physical levan-based hydrogel as a dermal filler for soft tissue augmentation

A novel levan-based injectable hydrogel was developed as a dermal filler having better in vivo stability and efficacy compared to HA-based hydrogel.

Self-assembled nanomaterials for synergistic antitumour therapy

Recent progress on self-assembled nanodrugs for anticancer treatment was discussed.

Nanotechnology in Glycomics: Applications in Diagnostics, Therapy, Imaging, and Separation Processes

This review comprehensively covers the most recent achievements (from 2013) in the successful integration of nanomaterials in the field of glycomics. The first part of the paper addresses the beneficial properties of nanomaterials for the construction of biosensors, bioanalytical devices, and protocols for the detection of various analytes, including viruses and whole cells, together with their key characteristics. The second part of the review focuses on the application of nanomaterials integrated with glycans for various biomedical applications, that is, vaccines against viral and bacterial infections and cancer cells, as therapeutic agents, for in vivo imaging and nuclear magnetic resonance imaging, and for selective drug delivery. The final part of the review describes various ways in which glycan enrichment can be effectively done using nanomaterials, molecularly imprinted polymers with polymer thickness controlled at the nanoscale, with a subsequent analysis of glycans by mass spectrometry. A short section describing an active glycoprofiling by microengines (microrockets) is covered as well.

Development of a nanoparticle system based on a fructose polymer: Stability and drug release studies

New drug delivery systems (DDSs) with levan or its carboxymethylated form, as carriers, and 5-fluorouracil as a drug, are produced in this work. Levan is obtained after cultivating A. nectaris and polymer nanoparticles are created in water by a self-assembled process. The effect of pH and the ionic strength on polymer nanoparticles aggregation is studied. Basic pHs produces a particle size between 300 and 400nm with a Z-potential around -20mV because a basic medium promotes repulsion forces. DDSs of 300-400nm and a Z-potential about -25mV are prepared by taking advantage of the amphiphilic properties of the levan. The drug is bound to either levan or carboxymethyllevan surfaces by electrostatic interactions, obtaining the best results at basic pHs. 45-70% of the drug is released from the levan in 23h depending on the pH preparation, whereas only a low percentage of the drug is released from the carboxymethyllevan.

Green and facile synthesis of a theranostic nanoprobe with intrinsic biosafety and targeting abilities

Traditional targeting nanoprobes suffer from the risks of partial loss of targeting activity and nanoparticle aggregation induced by post-synthetic modifications, ambiguous toxicity, tedious synthesis procedures and environmentally hazardous processes. Herein, we report a green and facile strategy to fabricate transferrin-indocyanine green nanoparticles as a smart theranostic agent with intrinsic biosafety and active targeting abilities for near-infrared fluorescent imaging and photothermal therapy of tumors. Simple mixing of transferrin and indocyanine green enables their self-assembly in aqueous solution to form nanoparticles with excellent water solubility, colloidal stability, favorable biocompatibility and impressive active targeting theranostic effects in vitro and in vivo. The transferrin-indocyanine green nanoparticles show great potential in theranostic applications of tumors in clinical therapy.

Indocyanine green delivery systems for tumour detection and treatments

Indocyanine green (ICG) is a cyanine compound that displays fluorescent properties in the near infrared region. This dye is employed for numerous indications but nowadays its major application field regards tumour diagnosis and treatments. Optical imaging by near infrared fluorescence provides news opportunities for oncologic surgery. The imaging of ICG can be useful for intraoperative identification of several solid tumours and metastases, and sentinel lymph node detection. In addition, ICG can be used as an agent for the destruction of malignant tissue, by virtue of the production of reactive oxygen species and/or induction of a hyperthermia effect under irradiation. Nevertheless, ICG shows several drawbacks, which limit its clinical application. Several formulative strategies have been studied to overcome these problems. The rationale of the development of ICG containing drug delivery systems is to enhance the in vivo stability and biodistribution profile of this dye, allowing tumour accumulation and resulting in better efficacy. In this review, ICG containing nano-sized carriers are classified based on their chemical composition and structure. In addition to nanosystems, different formulations including hydrogel, microsystems and others loaded with ICG will be illustrated. In particular, this report describes the preparation, in vitro characterization and in vivo application of ICG platforms for cancer imaging and treatment. The promising results of all systems confirm their clinical utility but further studies are required prior to evaluating the formulations in human trials.