Boosting the Cell Harvesting Performance of Poly(di(ethylene glycol)methyl ether methacrylate) Cell Release Layers via Copolymerization of Photo- and Thermoresponsive Monomers

The performance of the cell-selective thermoresponsive poly(di(ethylene glycol)methyl ether methacrylate) (PDEGMA) cell harvest system is shown to be drastically enhanced by exploiting the combination of photoresponsive spiropyran derivates and PDEGMA in copolymerized brushes. The analysis of copolymerized 1'-(2-methacryloxyethyl)-3',3'-dimethyl-6-nitrospiro(2H-1-benzopyran-2,2'-indoline) (SPMA) (DEMGA) di(ethylene glycol)methyl ether methacrylate brushes revealed that a minor adjustment of the SPMA/DEGMA ratios results in a significant alternation of wettability as well as protein adsorption, when switching the temperature from 37 to 22 °C and alternately irradiating using different light wavelengths (from 530 to 365 nm). Thin P(SPMA-co-DEGMA) layers supported pancreatic tumor PaTu 8988t cells with high cell viability. Copolymer layers with 2.5% SPMA/DEGMA led to the highest efficiency of enzyme-free cell release with very good cell viability. The release is induced by cooling the cell culture medium to 22 °C and irradiating the surface with 365 nm light. Compared to neat PDEGMA, the P(SPMA-co-DEGMA) layers showed a threefold increase in the speed of the change of cell morphology of the attached cells and a >5 times increased fraction of detached cells, which underlines the potential of these dual responsive PDEGMA systems for optimized performance in the facile capture, culture, and release of different cell lines.

Preparation of Temperature-Responsive Films Based on PNVCL Microgel with Varying Sizes and Cross-Linking Degrees for Cell Harvesting

This work reports preparing thermal responsive poly (N-isovinylcaprolactam) (PNVCL) microgel based films for cell growth and detachment. PNVCL microgels of hydrated size ranging from 386 to 815 nm (25 °C) and different crosslinking degree are prepared. The PNVCL microgels can be rapidly and massively deposited on glass by spin coating method. Atomic force microscopy (AFM) and water contact angle (WCA) are used to study the influence of crosslinking degree and particle size on the surface morphology, stability, and hydrophilicity of PNVCL microgel film. The cell activity of the desorbed cells is quantitatively characterized employing human normal lung epithelial cells (BEAS-2B). The results show that BEAS-2B cells can be desorbed quickly from the film in 30 min, and the optical density (OD) value of desorbed cells incubated after 3 d increases by approximately 52% compared to the control group. This study broadens the selection of temperature-sensitive film for cell harvesting, and provides a new tool for the quantitative characterization of desorbed cells.

Multivalency-enhanced enzyme inhibitors with biomolecule-responsive activity

This work reports a polymeric adenosine triphosphate (ATP)-responsive trypsin inhibitor. The polymeric inhibitor was rationally obtained by optimizing the benzamidine and phenylboronic acid monomers, which could synergistically bind with the phosphate and ribose groups in ATP. The ATP-responsive trypsin activity shows its potential as a therapeutic drug for cancer-targeting cell inhibition.

Enhanced Intracellular Delivery and Cell Harvest Using a Candle Soot-Based Photothermal Platform with Dual-Stimulus Responsiveness

Intracellular delivery of bioactive macromolecules and functional materials plays a crucial role in fundamental biological research and clinical applications. Nondestructive and efficient harvesting of engineered cells is also required for some specific applications. In this work, we develop a multifunctional platform based on candle soot modified with copolymer brushes containing temperature-responsive poly(N-isopropylacrylamide) (PNIPAAm) and sugar-responsive phenylboronic acid (PBA) components. This platform possesses a high cell adhesion capacity due to the inherent hierarchical structure of candle soot and the formation of boronate ester bonds between the PBA groups and glycoproteins on the cell membrane. Under the irradiation of a near-infrared laser, the excellent light-to-heat conversion ability of candle soot enables the highly efficient delivery of macromolecules into diverse cells (including hard-to-transfect cells) attached to the surface via a photothermal-poration mechanism. Owing to the temperature-responsive properties of PNIPAAm and the sugar-responsive properties of PBA, the engineered cells could be harvested nondestructively from the platform by a mild treatment using a cold fructose solution. A proof-of-concept experiment demonstrates that fibroblasts attached to the surface could be transfected by a functional plasmid encoding basic fibroblast growth factor and then harvested efficiently and recultured with improved proliferation and migration ability. The whole delivery-harvesting process required less than 1 h, allowing the cells to be engineered without compromising their viability. This platform thus provides a widely applicable method for both the intracellular delivery of diverse macromolecules efficiently as well as harvesting engineered cells simply and safely, holding great potential for biomedical applications.

Probing and Manipulating Noncovalent Interactions in Functional Polymeric Systems

Noncovalent interactions, which usually feature tunable strength, reversibility, and environmental adaptability, have been recognized as driving forces in a variety of biological and chemical processes, contributing to the recognition between molecules, the formation of molecule clusters, and the establishment of complex structures of macromolecules. The marriage of noncovalent interactions and conventional covalent polymers offers the systems novel mechanical, physicochemical, and biological properties, which are highly dependent on the binding mechanisms of the noncovalent interactions that can be illuminated via quantification. This review systematically discusses the nanomechanical characterization of typical noncovalent interactions in polymeric systems, mainly through direct force measurements at microscopic, nanoscopic, and molecular levels, which provide quantitative information (e.g., ranges, strengths, and dynamics) on the binding behaviors. The fundamental understandings of intermolecular and interfacial interactions are then correlated to the macroscopic performances of a series of noncovalently bonded polymers, whose functions (e.g., stimuli-responsiveness, self-healing capacity, universal adhesiveness) can be customized through the manipulation of the noncovalent interactions, providing insights into the rational design of advanced materials with applications in biomedical, energy, environmental, and other engineering fields.

Emerging Theranostic Nanomaterials in Diabetes and Its Complications

Diabetes mellitus (DM) refers to a group of metabolic disorders that are characterized by hyperglycemia. Oral subcutaneously administered antidiabetic drugs such as insulin, glipalamide, and metformin can temporarily balance blood sugar levels, however, long-term administration of these therapies is associated with undesirable side effects on the kidney and liver. In addition, due to overproduction of reactive oxygen species and hyperglycemia-induced macrovascular system damage, diabetics have an increased risk of complications. Fortunately, recent advances in nanomaterials have provided new opportunities for diabetes therapy and diagnosis. This review provides a panoramic overview of the current nanomaterials for the detection of diabetic biomarkers and diabetes treatment. Apart from diabetic sensing mechanisms and antidiabetic activities, the applications of these bioengineered nanoparticles for preventing several diabetic complications are elucidated. This review provides an overall perspective in this field, including current challenges and future trends, which may be helpful in informing the development of novel nanomaterials with new functions and properties for diabetes diagnosis and therapy.

A Near-Infrared-Triggered Dynamic Wrinkling Biointerface for Noninvasive Harvesting of Practical Cell Sheets

Cell sheet engineering represents a new era of precise and efficient regenerative medicine, but its efficacy is limited by the elaborative preparation and the weak mechanics. Herein, a near-infrared (NIR)-triggered dynamic wrinkling biointerface was designed for rapid acquisition of practical cell sheets. The biocompatible NIR can initiate the photothermal-mechanical linkage cascade to efficiently dissolve the collagen supporting layer and release the high-quality cell sheets. The interfacial shear force generates with the dynamic wrinkling, playing an active role in accelerating the cell sheet release. High-quality and self-supporting cell sheets can be harvested within a few minutes, demonstrating a new paradigm of photothermal-mechanical manipulation. The transplantable cell sheets with outstanding physiological and mechanical performances were proven to promote wound healing in skin regeneration. This method may open a completely new front in thermal and mechanical responsive cascade to harvest cell sheets, facilitating their wide applications in regenerative medicine.

Dynamic Colloidal Photonic Crystal Hydrogels with Self-Recovery and Injectability

Simulation of self-recovery and diversity of natural photonic crystal (PC) structures remain great challenges for artificial PC materials. Motivated by the dynamic characteristics of PC nanostructures, here, we present a new strategy for the design of hydrogel-based artificial PC materials with reversible interactions in the periodic nanostructures. The dynamic PC hydrogels, derived from self-assembled microgel colloidal crystals, were tactfully constructed by reversible crosslinking of adjacent microgels in the ordered structure via phenylboronate covalent chemistry. As proof of concept, three types of dynamic colloidal PC hydrogels with different structural colors were prepared. All the hydrogels showed perfect self-healing ability against physical damage. Moreover, dynamic crosslinking within the microgel crystals enabled shear-thinning injection of the PC hydrogels through a syringe (indicating injectability or printability), followed by rapid recovery of the structural colors. In short, in addition to the great significance in biomimicry of self-healing function of natural PC materials, our work provides a facile strategy for the construction of diversified artificial PC materials for different applications such as chem-/biosensing, counterfeit prevention, optical display, and energy conversion.

Preparation and evaluation of photo-responsive hollow SnO2 molecularly imprinted polymers for the selective recognition of kaempferol

Novel photo-responsive hollow structured molecularly imprinted polymers (PHMIPs) were developed as a selective sorbent to recognize and separate analytes in complex samples. The PHMIPs were prepared using kaempferol (KAE) as the template, 4-[(4-methacryloyloxy) phenylazo] benzenesulfonic acid as a photo-responsive functional monomer, and hollow SnO₂ (Ho-SnO₂) as the support via free radical polymerization. The structure and physical properties of the developed polymers were characterized using different nano structural techniques and spectroscopy. Under alternating irradiation at 365 and 440 nm, the PHMIPs could release and uptake KAE, indicating that the template molecules can be easily bound to recognition sites and released back into solution. From adsorption experiments, the binding properties were evaluated, and the maximal adsorption capacity of the PHMIPs was 11.04 mg g^-1. Furthermore, the developed PHMIPs showed high selectivity towards KAE compared to other compounds. Subsequently, the materials were successfully applied to the photo-controlled extraction of KAE from sea buckthorn leaves. The recoveries for KAE were higher than 90% and relative standard deviation values were between 1.81% and 2.53%, indicating the potential of the developed materials for use in extracting KAE from complex samples.

Boosting osteogenic potential and bone regeneration by co-cultured cell derived extracellular matrix incorporated porous electrospun scaffold

Implants for bone regeneration to remedy segmental bone defects, osteomyelitis, necrotic bone tissue and non-union fractures have worldwide appeal. Although biomaterials offer most of the advantages by improving tissue growth but developments are more commonly achieved via biologically derived molecules. To aid site specific bone tissue regeneration by synthetic scaffold, cell derived extracellular matrix (ECM) can be a crucial component. In this study, co-cultured bone marrow mesenchymal stem cell and osteoblastic cells derived ECM incorporated electrospun polycaprolactone (PCL) membranes were assessed for bone tissue engineering application. The preliminary experimental details indicated that, co-culture of cells supported enhanced in vitro ECM synthesis followed by successful deposition of osteoblastic ECM into electrospun membranes. The acellular samples revealed retention of ECM related biomacromolecules (collagen, glycosaminoglycan) and partial recovery of pores after decellularization. In vitro biocompatibility tests ensured improvement of proliferation and osteoblastic differentiation of MC3T3-E1 cells in decellularized ECM containing membrane (PCL-ECM) compared to bare membrane (PCL-B) which was further confirmed by osteogenic marker proteins expression analysis. The decellularized PCL-ECM membrane allowed great improvement of bone regeneration over the bare membrane (PCL-B) in 8 mm size critical sized rat skull defects at 2 months of post implantation. In short, the outcome of this study could be impactful in development and application of cell derived ECM based synthetic electrospun templates for bone tissue engineering application.[Formula: see text].

Thermo-responsive imprinted hydrogel with switchable sialic acid recognition for selective cancer cell isolation from blood

In this work, a sialic acid (SA)-imprinted thermo-responsive hydrogel layer was prepared for selective capture and release of cancer cells. The SA-imprinting process was performed at 37 °C using thermo-responsive functional monomer, thus generating switchable SA-recognition sites with potent SA binding at 37 °C and weak binding at a lower temperature (e.g., 25 °C). Since SA is often overexpressed at the glycan terminals of cell membrane proteins or lipids, the SA-imprinted hydrogel layer could be used for selective cancer cell recognition. Our results confirmed that the hydrogel layer could efficiently capture cancer cells from not only the culture medium but also the real blood samples. In addition, the captured cells could be non-invasively released by lowing the temperature. Considering the non-invasive processing mode, considerable capture efficiency, good cell selectivity, as well as the more stable and durable SA-imprinted sites compared to natural antibodies or receptors, this thermo-responsive hydrogel layer could be used as a promising and general platform for cell-based cancer diagnosis.

•

Thermo-responsive sialic acid (SA)-imprinted hydrogel layer was prepared.

•

The hydrogel layer could efficiently and selective capture cancer cells at 37 °C.

•

The captured cancer cells could be released at a lower temperature (e.g., 25 °C).

•

The hydrogel layer could be used for capture and release cancer cells from blood.

Biomimetic periosteum-bone substitute composed of preosteoblast-derived matrix and hydrogel for large segmental bone defect repair

Repairing large segmental bone defects above a critical size remains challenging with high risk of delayed union or even non-union. From the perspective of bone development and clinical experience, periosteum plays an indispensable role in bone repair and reconstruction. In this study, we explored the feasibility of using preosteoblast-derived matrix (pODM) as a biomimetic periosteum. By culturing MC3T3-E1 cell sheet on poly(dimethylsiloxane) and performing decellularization, an integral cell-free sheet of pODM could be readily harvested. Bone marrow mesenchymal stem cells (BMSCs) adhered and proliferated well on pODM. In addition, pODM exhibited a chemotactic effect on BMSCs in a concentration-dependent manner and also promoted osteogenic differentiation of BMSCs. Following that, pODM was wrapped around a gelatin methacryloyl (GelMA) hydrogel to construct an engineered periosteum-bone substitute. A rabbit radius segmental bone defect model was used to examine the bone repair efficacy of pODM/GelMA. Upon implantation of pODM/GelMA construct for 12 weeks, the critical-sized bone defects completely healed with remarkable full reconstruction of medullary cavity at the radial diaphysis. Together, this work proposes a high potency of using precursor cell-derived matrix as a biomimetic periosteum, which preserves the beneficial biological factors while avoids the limitations of using exogenous cells for bone regeneration. Combining precursor cell-derived matrix with hydrogel may provide a promising periosteum-bone biomimetic substitute for bone repair. STATEMENT OF SIGNIFICANCE: Repairing large segmental bone defects above a critical size remains challenging. As the periosteum plays an essential role in bone repair, this study aimed to explore the use of preosteoblast-derived matrix (pODM), harvested from decellularized MC3T3-E1 cell sheet, as a biomimetic periosteum to facilitate bone repair. We found that in vitro, pODM exhibited considerable chemotactic effect and osteogenic induction capability to bone marrow mesenchymal stem cells (BMSCs). In vivo, implantation of pODM/gelatin methacryloyl (GelMA) constructs as engineered periosteum-bone substitutes effectively repaired the critical-sized segmental bone defects at rabbit radius. Surprisingly, remarkable full reconstruction of medullary cavity at the diaphysis was achieved. Therefore, combining pODM with hydrogel may provide a promising biomimetic substitute for bone repair.

Tissue Engineering and Regenerative Medicine: Achievements, Future, and Sustainability in Asia

Exploring innovative solutions to improve the healthcare of the aging and diseased population continues to be a global challenge. Among a number of strategies toward this goal, tissue engineering and regenerative medicine (TERM) has gradually evolved into a promising approach to meet future needs of patients. TERM has recently received increasing attention in Asia, as evidenced by the markedly increased number of researchers, publications, clinical trials, and translational products. This review aims to give a brief overview of TERM development in Asia over the last decade by highlighting some of the important advances in this field and featuring major achievements of representative research groups. The development of novel biomaterials and enabling technologies, identification of new cell sources, and applications of TERM in various tissues are briefly introduced. Finally, the achievement of TERM in Asia, including important publications, representative discoveries, clinical trials, and examples of commercial products will be introduced. Discussion on current limitations and future directions in this hot topic will also be provided.

Multistimulus Responsive Biointerfaces with Switchable Bioadhesion and Surface Functions

Stimuli-responsive biointerfaces can serve as dynamic tools for modulation of biointerfacial interactions. Considering the complexity of biological environments, surfaces with multistimulus responsive switchable bioactivity are of great interest. In the work reported herein, a multistimulus responsive biointerface with on-off switchable bioadhesion (protein adsorption, bacterial adhesion, and cell adhesion) and surface functions in response to change in temperature, pH, or sugar content is developed. This surface is based on a silicon modified with a copolymer containing a thermoresponsive component (poly(N-isopropylacrylamide)) and a component, phenylboronic acid, that can form pH-responsive and sugar-responsive dynamic boronate ester bonds with diol-containing molecules. It is shown that biointeractions including protein adsorption and release, bacteria and cell attachment and detachment on this surface can be regulated by changing temperature, pH, and sugar content of the medium, either individually or all three simultaneously. Furthermore, this surface can switch between two different functions, namely between killing and releasing bacteria, by introduction of a diol-containing biocidal compound. Compared to switchable surfaces that are responsive to only one stimulus, our multistimulus responsive surface is better adapted to respond to the multifunctional complexities of the biological environment and thus has potential for use in numerous biomedical and biotechnology applications.

Emerging functional materials based on chemically designed molecular recognition

The specific interactions responsible for molecular recognition play a crucial role in the fundamental functions of biological systems. Mimicking these interactions remains one of the overriding challenges for advances in both fundamental research in biochemistry and applications in material science. However, current molecular recognition systems based on host–guest supramolecular chemistry rely on familiar platforms (e.g., cyclodextrins, crown ethers, cucurbiturils, calixarenes, etc.) for orienting functionality. These platforms limit the opportunity for diversification of function, especially considering the vast demands in modern material science. Rational design of novel receptor-like systems for both biological and chemical recognition is important for the development of diverse functional materials. In this review, we focus on recent progress in chemically designed molecular recognition and their applications in material science. After a brief introduction to representative strategies, we describe selected advances in these emerging fields. The developed functional materials with dynamic properties including molecular assembly, enzyme-like and bio-recognition abilities are highlighted. We have also selected materials with dynamic properties in contract to traditional supramolecular host–guest systems. Finally, the current limitations and some future trends of these systems are discussed.

Hydrogel scaffolds for tissue engineering: the importance of polymer choice

We explore the design and synthesis of hydrogel scaffolds for tissue engineering from the perspective of the underlying polymer chemistry. The key polymers, properties and architectures used, and their effect on tissue growth are discussed.

Responsive principles and applications of smart materials in biosensing

Biosensing is a rising analytical field for detection of biological indicators using transducing systems. Smart materials can response to external stimuli, and translate the stimuli from biological domains into signals that are readable and quantifiable. Smart materials, such as nanomaterials, photonic crystals and hydrogels have been widely used for biosensing purpose. In this review, we illustrate the incorporation of smart materials in biosensing systems, including the design of responsive materials, their responsive mechanism of biosensing, and their applications in detection of four types of common biomolecules (including glucose, nucleic acids, proteins, and enzymes). In the end, we also illustrate the current challenges and prospective of using smart materials in biosensing research fields.

A Magnetic Dynamic Microbiointerface with Biofeedback Mechanism for Cancer Cell Capture and Release

Dynamic biointerfaces with reversible surface bioactivities enable dynamic modulation of cell-material interactions, thus attracting great attention in biomedical science. Herein, we demonstrated a paradigm shift of dynamic biointerfaces from macroscopical substrates to micron-sized particles by reversible engineering of a phenylboronic acid (PBA)-functionalized magnetic microbead with mussel-inspired cancer cell-targeting peptide. Due to reversible catechol-boronate interactions between the peptides and microbeads, the micron-sized dynamic biointerface exhibited sugar-responsive cancer-targeting activity, showing the potential as a microplatform for magnetic and noninvasive isolation of cancer cells through natural biofeedback mechanism (e.g., human glycemic volatility). Our results demonstrated that the dynamic magnetic platform was capable of selective cancer cell capture (∼85%) and sugar-triggered release of them (>93%) in cell culture medium with high efficiency. More importantly, by using this platform, a decent number of target cells (∼23 on average) could be magnetically isolated and identified from artificial CTC blood samples (1 mL) spiked with 100 cancer cells. In view of the biomimetic nature, high capture efficiency, excellent selectivity, and superiority in cell separation and purification processes, the dynamic magnetic microplatform reported here would be a promising and general tool for rare cell detection and separation and cell-based disease diagnosis.

Dynamic Synthetic Biointerfaces: From Reversible Chemical Interactions to Tunable Biological Effects

Dynamic synthetic biointerface is a new concept of biomaterials with smart surface properties capable of controlled display of bioactive ligands, dynamic modulation of cell-biomaterial interactions, and subsequently clever manipulation of fundamental cell behaviors like adhesion, migration, proliferation, differentiation, apoptosis, and so on. As mimics of the extracellular matrix (ECM), such molecularly dynamic biointerfaces have attracted increasing attention because of their tunable biological effects with great significance in in situ cell biology, tissue engineering, drug targeting, and cell isolation for cancer theranostics. Approaches to control bioligand presentation on materials mainly rely on surface functionalization with dynamic or reversible chemical linkers to which the ligands are tethered. Photoelectric-transformable or photocleavable chemistry, host-guest supramolecular chemistry, and multiple noncovalent interactions were initially employed for fabrication of dynamic synthetic biointerfaces. However, the external stimuli required in these systems, including electrochemical potential, electrochemical reaction, and near-infrared or UV light, are mostly invasive to living cells; and few of them are able to respond to the stimuli occurring in natural biological processes. In addition, most of current systems focused only on the control of cell adhesion, other cell behaviors like migration, differentiation and apoptosis have rarely been explored. Therefore, the development of novel synthetic biointerfaces that permit access to noninvasive control of diverse cell behaviors still represents a key challenge in biomaterials science. Our group pioneers the use of reversible covalent bonds, metal coordinative interactions, and the molecular affinity of molecularly imprinted synthetic receptors as the dynamic driving forces for the fabrication of smart biointerfaces. Several typical biological stimuli, such as glycemic volatility, body temperature fluctuations, regional disparity of pH values, and specific biomolecules, were tactfully involved in our systems. In this Account, we highlight the strategies we have used on the exploitation of dynamic synthetic biointerfaces based on the above three types of reversible chemical interactions. While our attention has been focused on biologically stimuli-responsive or other noninvasive ligand presentation, the versatility of dynamic synthetic biointerfaces in control of cell adhesion, directing cell differentiation, and targeting cell apoptosis has also been successfully demonstrated. In addition, a paradigm shift of dynamic synthetic biointerfaces from macroscopic to microscopic scale (e.g., nanobiointerfaces) was conceptually demonstrated in our research. The potential applications of these developed dynamic systems, including fundamental cell biology, surface engineering of biomaterials, scaffold-free tissue engineering, cell-based cancer diagnosis, and drug targeting cancer therapy, were also introduced, respectively. Although the development of dynamic synthetic biointerfaces is still in its infancy, we strongly believe that further efforts in this field will play a continuously and increasingly significant role in bridging the gap between chemistry and biology.

Recent advances in cell sheet technology for bone and cartilage regeneration: from preparation to application

Bone defects caused by trauma, tumour resection, infection and congenital deformities, together with articular cartilage defects and cartilage-subchondral bone complex defects caused by trauma and degenerative diseases, remain great challenges for clinicians. Novel strategies utilising cell sheet technology to enhance bone and cartilage regeneration are being developed. The cell sheet technology has shown great clinical potential in regenerative medicine due to its effective preservation of cell-cell connections and extracellular matrix and its scaffold-free nature. This review will first introduce several widely used cell sheet preparation systems, including traditional approaches and recent improvements, as well as their advantages and shortcomings. Recent advances in utilising cell sheet technology to regenerate bone or cartilage defects and bone-cartilage complex defects will be reviewed. The key challenges and future research directions for the application of cell sheet technology in bone and cartilage regeneration will also be discussed.

Fingerprintable Hydrogel from Dual Reversible Cross-Linking Networks with Different Relaxation Times

Most of the chemical hydrogels are stretchable, and deformed hydrogels may be recovered when the strain is removed. Such a hydrogel with viscoelastic property cannot be remolded under mild conditions. Here, we demonstrated that a combination of dual reversible cross-linking with different relaxation time scales could be used to develop a remoldable hydrogel responding to mild external stress. We fabricated the hydrogel with the surface-primary amine-rich silica nanodots (ca. 2.0 nm) and benzaldehyde-terminated poly(ethylene oxide)-poly(propylene oxide) (PPO)-poly(ethylene oxide) triblock copolymers (BAF127) at low temperature (<10 °C) to form the chemical cross-linking by Schiff-base bonding. Increasing temperature (>15 °C) induced the formation of physical cross-linking between the hydrophobic PPO segments. The latter network is weak and shows fast relaxation, whereas the former shows slow relaxation. The unique structural characteristics provides this hydrogel high stretchability and self-healability, as well as moldability. In particular, we demonstrated that this transparent hydrogel can keep the fine three-dimensional patterns of a fingerprint, which may be applied for collecting digital information of fingerprints for identification.

Molecularly Imprinted Fluorescent Test Strip for Direct, Rapid, and Visual Dopamine Detection in Tiny Amount of Biofluid

Paper-based assays for detection of physiologically important species are needed in medical theranostics owning to their superiorities in point of care testing, daily monitoring, and even visual readout by using chromogenic materials. In this work, a facile test strip is developed for visual detection of a neurotransmitter dopamine (DA) based on dual-emission fluorescent molecularly imprinted polymer nanoparticles (DE-MIPs). The DE-MIPs, featured with tailor-made DA affinity and good anti-interference, exhibit DA concentration-dependent fluorescent colors, due to the variable ratios of dual-emission fluorescence caused by DA binding and quenching. By facile coating DE-MIPs on a filter paper, the DA test strips are obtained. The resultant test strip, like the simplicity of a pH test paper, shows the potential for directly visual detection of DA levels just by dripping a tiny amount of biofluid sample on it. The test result of real serum samples demonstrates that the DA strip enables to visually and semiquantitatively detect DA within 3 min by using only 10 µL of serum samples and with a low detection limit ((100-150) × 10^-9 m) by naked eye. This work thus offers a facile and efficient strategy for rapid, visual, and on-site detection of biofluids in clinic.

Dynamically PEGylated and Borate-Coordination-Polymer-Coated Polydopamine Nanoparticles for Synergetic Tumor-Targeted, Chemo-Photothermal Combination Therapy

Multifunctional nanomaterials with efficient tumor-targeting and high antitumor activity are highly anticipated in the field of cancer therapy. In this work, a synergetic tumor-targeted, chemo-photothermal combined therapeutic nanoplatform based on a dynamically PEGylated, borate-coordination-polymer-coated polydopamine nanoparticle (PDA@CP-PEG) is developed. PEGylation on the multifunctional nanoparticles is dynamically achieved via the reversible covalent interaction between the surface phenylboronic acid (PBA) group and a catechol-containing poly(ethylene glycol) (PEG) molecule. Due to the acid-labile PBA/catechol complex and the weak-acid-stable PBA/sialic acid (SA) complex, the nanoparticles can exhibit a synergetic targeting property for the SA-overexpressed tumor cells, i.e., the PEG-caused "passive targeting" and PBA-triggered "active targeting" under the weakly acidic tumor microenvironment. In addition, the photothermal effect of the polydopamine core and the doxorubicin-loading capacity of the porous coordination polymer layer endow the nanoparticles with the potential for chemo-photothermal combination therapy. As expected, the in vitro and in vivo studies both verify that the multifunctional nanoparticles possess relatively lower systematic toxicity, efficient tumor targeting ability, and excellent chemo-photothermal activity for tumor inhibition. It is believed that these multifunctional nanoparticles with synergetic tumor targeting property and combined therapeutic strategies would provide an insight into the design of a high-efficiency antitumor nanoplatform for potential clinical applications.

POSS-enhanced thermosensitive hybrid hydrogels for cell adhesion and detachment

Thermosensitive poly(N-isopropylacrylamide) (PNIPAM)-based substrates have presented great promise in cell sheet engineering. However, non-functionalized PNIPAM cannot be well applied for cell cultivation, due to the low cell adhesion. Herein, to enhance PNIPAM-based substrates and to promote cell proliferation and detachment, a polyhedral oligomeric silsesquioxane (POSS) nanoscale inorganic enhanced agent has been introduced into PNIPAM matrices to construct POSS-containing hybrid hydrogels. The hydrogels were facilely prepared using POSS as a cross-linker via one-pot crosslinking reaction under UV irradiation. The swelling behavior, thermal stability and the mechanical properties of POSS–PNIPAM hybrid hydrogels have been evaluated and they are all dependent on the content of POSS. The in vitro experiment confirms that human amniotic mesenchymal stem cells (hAMSCs) exhibit clearly enhanced adhesion and proliferation on the substrates of POSS–PNIPAM hybrid hydrogels in comparison to the pure PNIPAM hydrogel without POSS. Based on the thermal-responsiveness of PNIPAM, the proliferated cells are easily released without damage from the surface of hybrid hydrogels. Therefore, POSS-enhanced PNIPAM hybrid hydrogels provide a unique approach for harvesting anchorage dependent stem cells.

Thermosensitive poly(N-isopropylacrylamide) (PNIPAM)-based substrates have presented great promise in cell sheet engineering.

Injectable tissue adhesive composite hydrogel with fibroblasts for treating skin defects

In this work, an injectable composite hydrogel was synthesized via a unique way of crosslinking glycol chitosan (GC) with silica nano-particles (SiNP) through non-chemical interactions, and was then applied as a kind of wound dressing. Gelation was achieved through the incorporation of SiNPs with the GC segments in aqueous solution, therefore strictly confining the movement of the solubilized polymer chains. Rheology tests showed that the sol-gel transition and the moduli of the hydrogel were influenced by the composition of the two components, the size of the nano-particles and the conformation of the polymers. Using such a strategy, tissue adhesion properties of GC were well-preserved in the GC/SiNP hydrogel and therefore it gains gluey properties toward biological tissues as demonstrated through the adhesion of two pieces of mouse skin, obtaining a lap-shear stretching force of ca. 90 kPa. This characteristic, together with the injectability, allowed the hydrogel to be administrated directly on the wound site and to fill the wound area. Meanwhile, the hydrogel also works as a carrier of protein and cells. The in situ encapsulation of fibroblasts enabled the promising properties of the GC/SiNP hydrogel to be used for treating full-thickness skin defects in a mouse model, resulting in the favorable growth of hair follicles and microvessels, hence reducing the risk of scar formation.

Responsive Boronic Acid-Decorated (Co)polymers: From Glucose Sensors to Autonomous Drug Delivery

Boronic acid-containing (co)polymers have fascinated researchers for decades, garnering attention for their unique responsiveness toward 1,2- and 1,3-diols, including saccharides and nucleotides. The applications of materials that exert this property are manifold including sensing, but also self-regulated drug delivery systems through responsive membranes or micelles. In this review, some of the main applications of boronic acid containing (co)polymers are discussed focusing on the role of the boronic acid group in the response mechanism. We hope that this summary, which highlights the importance and potential of boronic acid-decorated polymeric materials, will inspire further research within this interesting field of responsive polymers and polymeric materials.

Swelling of glucose-responsive gels functionalized with boronic acid

A model is developed for the elastic response of a glucose-sensitive gel functionalized with boronic acid under swelling in aqueous solutions of glucose with various pH. A gel is treated as a three-phase medium composed of a solid phase (partially ionized polymer network), solvent (water), and solute (mobile glucose molecules and ions). Constitutive equations are derived by means of the free energy imbalance inequality for three-dimensional deformation with finite strains. Numerical analysis demonstrates the ability of the model to describe the effects of pH, molar fraction of glucose, and concentration of functional groups on equilibrium water uptake diagrams under unconstrained and constrained swelling.

Smart Thin Hydrogel Coatings Harnessing Hydrophobicity and Topography to Capture and Release Cancer Cells

Smart thin hydrogel coatings are fabricated to capture and release targeted cancer cells by simultaneously tuning surface hydrophobicity and topography. At physiological temperature, the targeted cancer cells are captured on the hydrophobic and wrinkled coating surface. At room temperature, the captured cells are released from the hydrophilic and smooth coating surface.

Engineering Dynamic Biointerfaces

Recent advances in dynamic biointerfaces enable spatiotemporal control over cell position and migration after attachment using substrates that employ chemical, optical, thermal, or electrical triggers. This review focuses on flexible and accessible methods for the fabrication of cellular arrays or co cultures for fundamental studies of cell biology or regenerative medicine.

Synthesis and polymerization of boronic acid containing monomers

This mini-review summarizes the most commonly used methods for the synthesis of phenylboronic acid-(co)polymers ranging from simple straightforward polymerization to complex post-polymerization modification.

Upper critical solution temperature (UCST) phase transition of halide salts of branched polyethylenimine and methylated branched polyethylenimine in aqueous solutions

The upper critical solution temperature (UCST) phase transition of halide salts of branched polyethylenimine (PEI) and methylated branched polyethylenimine (MPEI) is first reported in aqueous solutions. In particular, iodide counter-ions can introduce UCST properties in MPEI. The importance of the counter-ion composition of MPEI for UCST transition is discussed in detail.