TBHP/Et3N-Promoted Chemoselective Formylation and Peroxidation of Pyrrolo[2,1-a]isoquinolines

An efficient formylation of pyrrolo[2,1-a]isoquinoline derivatives has been reached by the use of TBHP (tBuOOH) and Et3N as the mediator. In this strategy, CHO and CDO can be readily incorporated into heteroarenes by the utilization of CHCl3 and CDCl3 as the carbonyl sources. Interestingly, a solvent-controlled chemoselectivity was observed. The use of PhCl as a solvent resulted in dearomatization and peroxidation of pyrrolo[2,1-a]isoquinolines, delivering functionalized peroxides in 53-64% yields.

Iodine(III)-promoted oxidative carbotrifluoromethylation of maleimides with imidazopyridines and Langlois' reagent

A metal-free protocol for oxidative carbotrifluoromethylation of maleimides with imidazopyridines and Langlois' reagent has been developed using (diacetoxyiodo)benzene (PIDA) as an oxidant. This three-component strategy enables one-step construction of 3,4-disubstituted maleimides in good yields with high functional group tolerance. Both experimental and theoretical studies support the proposed radical reaction mechanism.

KF-catalyzed direct thiomethylation of carboxylic acids with DMSO to access methyl thioesters

With dimethyl sulfoxide (DMSO) as the methylthio source, a KF-catalyzed strategy was employed for the direct thiomethylation of carboxylic acids with DMSO for the preparation of methyl thioesters. In this process, a wide range of methyl thioesters were obtained in moderate to excellent yields. This novel strategy features the first use of DMSO as a methylthiolating agent for the construction of methyl thioesters, transition metal-free conditions, inexpensive reagents, easy workup, broad substrate scope and sustainability. Additionally, this procedure can be readily scaled up to a gram scale.

NH4OAc/DMSO-Promoted Benzylation of Pyrrolo[2,1-a]isoquinolines

Benzylation of pyrrolo[2,1-a]isoquinoline derivatives has been realized with various phenols by the use of ammonium acetate as a promoter (20 examples, up to 84% yield). DMSO served as the source of methylene and solvent. The employment of iron chloride as a catalyst can also afford the desired benzylated products in moderate to good yields (11 examples, up to a 74% yield).

p-TSA·H2O catalyzed metal-free and environmentally benign synthesis of 4-aryl quinolines from arylamine, arylacetylene, and dimethyl sulfoxide

An environmentally benign and metal-free synthesis of 4-aryl quinolines is reported by employing readily available arylamine, arylacetylene, and DMSO in the presence of 20 mol% p-TSA·H2O. In the present protocol, the solvent DMSO serves as a reactant cum solvent for providing the C2 carbon atom of the quinoline skeleton. Notably, the reaction proceeds effectively and efficiently without the involvement of any metal catalyst, ligand, and co-catalyst as additives and inert atmospheric reaction conditions. This method provides high atom economy and good yields, and two C-C and one C-N bonds are formed in a single step through a three-component reaction.

Electrochemically Enabled Direct C3-Formylation of Imidazopyridines with Me3 N as a Carbonyl Source

A metal-free and oxidant-free electrochemically enabled strategy for C-3 formylation of imidazopyridines using trimethylamine as a one-carbon source has been established. This conversion has high functional group compatibility under mild conditions and ensures late-stage functionalization of pharmaceutical molecules. Furthermore, unexpected hexafluoroisopropoxylation products have been observed in some cases. Mechanistic studies using cyclic voltammetry and control experiments reveal the key intermediate of the formylation process.

Cobalt(III)-Catalyzed and DMSO-Involved Allylation of 1,3-Dicarbonyl Compounds with Alkenes

Cobalt(III)-catalyzed allylation of 1,3-dicarbonyl compounds has been reported with in situ generated allyl reagents from alkenes and dimethyl sulfoxide (DMSO). This novel protocol enables a high regio- and stereoselective access for a broad range of allyl 1,3-dicarbonyl compounds. In the transformation, DMSO plays the role of a C1 source, and it incorporates with alkenes to form the allyl reagent allylic methyl thioether. Moreover, a multiple-step pathway has been proposed to rationalize the mechanism study, which involves silver-mediated coupling, Co(III)-catalyzed π-allylation, and intermolecular nucleophilic substitution.

Modification of Pyrrolo[2,1-a]isoquinolines and Pyrrolo[1,2-a]quinolines with Ammonium Acetate and Dimethyl Sulfoxide via Methylthiomethylation

An efficient methylthiomethylation of pyrroloisoquinolines and pyrroloquinolines has been reached by the use of ammonium acetate and dimethyl sulfoxide. Methylthiomethylated heterocycles can be obtained in moderate to good yields in most cases, while trace amounts to good yields of methylene-bridged products can be observed. Choice of DMSO activator and its amount have a great influence on the chemoselectivity of this process. It is worth noting that this process can also be scalable. Another feature of this process is that the product can be transformed to sulfone and sulfoxide easily.

Selectfluor-Mediated Synthesis of β-Acyl Allyl Sulfones/β-Acyl Allyl Benzotriazoles from Ketones/Acetylenes, Aryl Sulfinates/Benzotriazole, and DMSO as a Dual-Carbon Synthon

A Selectfluor-mediated approach for the synthesis of β-acyl allyl sulfones/β-acyl allyl benzotriazoles with excellent atom economy from readily available acetophenones/aryl acetylenes, aryl sulfinates/benzotriazoles, and dimethyl sulfoxide (DMSO) is described. In this protocol, DMSO acts as a dual-carbon synthon, resulting in a transition-metal-free construction of two C-C and one C-S or two C-C and one C-N bonds in one pot. This approach is extended to generate chemically diverse compounds. Additionally, β-acyl allyl sulfones/β-acyl allyl benzotriazoles were prepared from acetylenes instead of acetophenones.

Recent Advance on Dimethyl Sulfoxide (DMSO) Used as a Multipurpose Reactant

Abstract:

Dimethyl sulfoxide (DMSO) is not only a common and cheap aprotic polar solvent with low toxicity, but also serves as an efficient and multipurpose reactant and has widely been used in organic synthesis. DMSO as an important precursor can effectively introducea broad range of functional fragments into organic molecules, such as -Me, -CH, -CH2, -SMe2, -CH2SMe, -CH2SOMe, -SMe, -SO2Me, -SOMe or as O substituents, and serves as a mild oxidant in organic transformations. Many significant achievements based on DMSO as a synthon in synthetic chemistry have rapidly made over the past several years. To help researchers further understand the recent advances in the field, the review summarizes the applications of DMSO as carbon, sulfur, and oxygen sources and is used as the dual synthon in synthetic transformations.

Photochemical regioselective C–H arylation of imidazo[1,2-a]pyridine derivatives using chlorophyll as a biocatalyst and diazonium salts

This communication describes the development of a mild method for the arylation of imidazo[1,2-a]pyridine with diazonium salt derivatives and using chlorophyll as a biocatalyst via visible-light catalysis.

Methylene-Tethered Arylsulfonation and Benzotriazolation of Aryl/Heteroaryl C-H Bonds with DMSO as a One-Carbon Surrogate

The Selectfluor-mediated approach toward the synthesis of methylene-tethered arylsulfonation and benzotriazolation of imidazopyridines has been described. The reaction involves imidazopyridine, aryl sulfinate, or benzotriazole and dimethyl sulfoxide (DMSO) in the presence of Selectfluor, where DMSO acts as a one-carbon synthon. The protocol has been extended to the methylene-tethered arylsulfonation and benzotriazolation of β-naphthols. The mechanistic insights show that the intermediate 3-((methylthio)methyl)-2-phenylimidazo[1,2-a]pyridine is generated from imidazopyridine, DMSO, and Selectfluor. The nucleophilic displacement by the aryl sulfinate salt or benzotriazole on the intermediate afforded the product.

Synthesis of Cyclopentenes and Cyclohexenes Via Cobalt(II)-Catalyzed Oxidative Cyclization

A unique method for the synthesis of cyclopentenes and cyclohexenes has been achieved by the coupling of diketones and alkenes under cobalt(II) catalysis and dimethyl sulfoxide involvement. Under optimal conditions, the formation of five- and six-membered rings can be readily controlled by the α-position substitution of styrenes. This process is proposed to proceed through a reaction sequence of oxidative coupling (mediated by K₂S₂O₈), regioselective alkene insertion (promoted by cobalt), and intramolecular attack of the resulting allylcobalt species on the carbonyl group or methyl group in the reactive methylene process.

Visible-light-promoted direct C3-trifluoromethylation and perfluoroalkylation of imidazopyridines

An efficient method for direct trifluoromethylation and perfluoroalkylation at C3 of imidazopyridines through visible light-promoted C-H bond functionalization was developed. Under the irradiation of a blue LED, a series of C3-perfluoroalkyl-substituted imidazopyridines were synthesized from the corresponding imidazopyridines and perfluoroalkyl iodides in moderate to good yields at room temperature. It should be mentioned that this reaction proceeded in the absence of any transition-metal catalyst, oxidant and photocatalyst.

Selective difunctionalization of electron-deficient alkynes: access to (E)-2-iodo-3-(methylthio)acrylate

A convenient and efficient approach to (E)-2-iodo-3-(methylthio)acrylate has been developed through direct iodothiomethylation of alkynes with aqueous HI and DMSO under mild conditions. This novel protocol has demonstrated a unique difunctionalization of electron-deficient alkynes with a broad substrate scope and excellent functional-group tolerance. Preliminary mechanistic studies indicated that prior diiodination of alkynes, followed by nucleophilic substitution with in situ generated DMS led to the formation of (E)-2-iodo-3-(methylthio)acrylate.

Copper-Catalyzed C-3 Functionalization of Imidazo[1,2-a]pyridines with 3-Indoleacetic Acids

A copper-catalyzed C-3 functionalization of imidazo[1,2-a]pyridines with 3-indoleacetic acids through an aerobic oxidative decarboxylative process has been developed. The protocol provided a series of 3-(1H-indol-3-ylmethyl)-imidazo[1,2-a]pyridines in moderate to good yields under simple reaction conditions. Importantly, some products exhibited potent antiproliferative activity in cancer cell lines.

Potassium Persulfate Mediated Chemodivergent C-3 Functionalization of 2H-Indazoles with DMSO as C1 Source

A facile, efficient, and transition-metal-free chemodivergent C-3 functionalization of 2H-indazoles was developed under aerobic conditions using carboxylic acid and DMSO as the combined source of the carboxylic acid ester group and DMSO as the formylating agent. A series of formylated indazoles and carboxylic acid esters of indazole derivatives were produced in moderate to excellent yields. The mechanistic studies suggest that the reactions probably proceed through a radical pathway.

Formylation and Bromination of Pyrrolo[2,1-a]isoquinoline Derivatives with Bromoisobutyrate and Dimethyl Sulfoxide

We have developed an efficient formylation of pyrroloisoquinolines using bromoisobutyrate and dimethyl sulfoxide as carbonyl reagent. Various formylated pyrroloisoquinolines could be prepared in good yields (up to 94%). This formylation process can be easily scaled up to gram scale with good yield. In most cases of pyrroloisoquinolines without methoxy groups, the combination of bromoisobutyrate and dimethyl sulfoxide could act as a bromination reagent, delivering brominated pyrroloisoquinolines in acceptable to good yields (up to 82%).

An expedient route to tricyanovinylindoles and indolylmaleimides from o-alkynylanilines utilising DMSO as a one-carbon synthon

A Pd(ii)/Cu(ii) catalysed domino synthesis of tricyanovinylindoles has been achieved using DMSO as a one-carbon synthon. The reaction proceeds via the construction of 2-aryl-3-formyl indole followed by sequential addition of malononitrile and a CN resulting in two C-C, one C[double bond, length as m-dash]C and one C-N bonds in the final product. Furthermore, post-synthetic modification results in the unprecedented formation of 4-cyano-3-indolylmaleimides. Photophysical studies of selected compounds show emission in the visible range.

DMSO as a Dual Carbon Synthon and Water as Oxygen Donor for the Construction of 1,3,5-Oxadiazines from Amidines

A selective and efficient synthesis of diaryl 1,3,5-oxadiazines was established for the first time from simple and readily available amidines in wet DMSO. DMSO was employed as a dual carbon synthon and water offered the oxygen atom to construct the oxadiazine ring. The reaction involved two new C-N and two new C-O bond formations.

Electrosynthesis of sulfonamides from DMSO and amines under mild conditions

With DMSO as the solvent and the precursor of a -SO₂Me unit at room temperature, a novel electrochemical oxidization and amination of DMSO with amines was developed for the synthesis of sulfonamides. Our investigations reveal that this transformation may involve a radical process and an electrochemical oxidization of DMSO.

Access to diverse primary, secondary, and tertiary amines via the merger of controllable cleavage of triazines and site-selective functionalization

An efficient approach for divergent synthesis of primary, secondary, and tertiary amines via the merger of controllable cleavage of triazines and site-selective functionalization is disclosed.

Cu-catalyzed cross-coupling of methyl ketones and pyridin-2-amines for the synthesis of N-(2-pyridyl)-α-ketoamides

An efficient copper-catalyzed strategy for the synthesis of α-ketoamides via cross-coupling of methyl ketones and pyridin-2-amines is described. This transformation has provided a simple process for the formation of C−N and C=O bonds to prepare α-ketoamides, which are important substrates and intermediates for the preparation of fine chemicals. The reaction mechanism is investigated, which suggests that the reaction proceeds via a radical pathway.

Iron-catalyzed radical cascade 6-endo cyclization of dienes towards fused nitrogen heterocycles initiated by an alkoxycarbonyl radical

An iron-catalyzed radical cascade cyclization of dienes initiated by an alkoxycarbonyl radical has been developed in the presence of (NH4)2S2O8, leading to a series of fused nitrogen heterocyclic compounds under relatively mild reaction conditions. The reaction is triggered by the addition of an alkyoxycarbonyl radical derived from the cleavage of alkoxyformyl hydrazide. Afterward, the formed nucleophilic radical preferred addition to the electron-neutral vinyl rather than the electron-deficient vinyl, followed by cascade 6-endo cyclization and further radical cyclization.

Copper- and DMF-mediated switchable oxidative C–H cyanation and formylation of imidazo[1,2-a]pyridines using ammonium iodide

The cyanation and formylation of imidazo[1,2-a]pyridines were developed under copper-mediated oxidative conditions using ammonium iodide and DMF as a nontoxic combined cyano-group source and DMF as a formylation reagent.

Palladium-catalyzed C3-selective C–H oxidative carbonylation of imidazo[1,2-a]pyridines with CO and alcohols: a way to access esters

A palladium-catalyzed C3-selective C–H oxidative carbonylation for the synthesis of various esters from imidazo[1,2-a]pyridines and CO with high efficiency and high atom economy has been developed.

Transition metal-free α-methylation of 1,8-naphthyridine derivatives using DMSO as methylation reagent

A practical approach to the direct α-methylation of 1,8-naphthyridines under mild reaction conditions has been developed using simple and readily available DMSO as a convenient and environmentally friendly carbon source. This method is transition metal-free and highly chemoselective, shows good functional group tolerance, and uses DMSO as a methyl source, providing efficient and rapid access to an important compound class, 2-methyl-1,8-naphthyridines.

Oxidative sulfonamidomethylation of imidazopyridines utilizing methanol as the main C1 source

An efficient one pot, three component synthesis of C3 sulfonamidomethylated imidazopyridines has been disclosed under metal-free conditions, which utilized the commercially available and renewable reagent methanol as the main methylene source. A wide range of substituted imidazopyridines and sulfamides/amines were well tolerated to afford the corresponding products in up to 92% yield. In the isotopic labelling experiment, it was found that a minor part of the methylene also originated from DTBP. Moreover, the radical scavenger reactions were conducted, which suggested that a free-radical mechanism was probably not involved. The current methodology featured several advantages, including broad substrate scope, good functional group tolerance and high reaction efficiency.