New generation solar cells: concepts, trends and perspectives

Nanoscale Characterization of Photocurrent and Photovoltage in Polycrystalline Solar Cells

We investigate the role of grain structures in nanoscale carrier dynamics of polycrystalline solar cells. By using Kelvin probe force microscopy (KPFM) and near-field scanning photocurrent microscopy (NSPM) techniques, we characterize nanoscopic photovoltage and photocurrent patterns of inorganic CdTe and organic-inorganic hybrid perovskite solar cells. For CdTe solar cells, we analyze the nanoscale electric power patterns that are created by correlating nanoscale photovoltage and photocurrent maps on the same location. Distinct relations between the sample preparation conditions and the nanoscale photovoltaic properties of microscopic CdTe grain structures are observed. The same techniques are applied for characterization of a perovskite solar cell. It is found that a moderate amount of PbI₂ near grain boundaries leads to the enhanced photogenerated carrier collections at grain boundaries. Finally, the capabilities and the limitations of the nanoscale techniques are discussed.

Perovskite Solar Cells: A Review of the Recent Advances

Perovskite solar cells (PSC) have been identified as a game-changer in the world of photovoltaics. This is owing to their rapid development in performance efficiency, increasing from 3.5% to 25.8% in a decade. Further advantages of PSCs include low fabrication costs and high tunability compared to conventional silicon-based solar cells. This paper reviews existing literature to discuss the structural and fundamental features of PSCs that have resulted in significant performance gains. Key electronic and optical properties include high electron mobility (800 cm2/Vs), long diffusion wavelength (>1 μm), and high absorption coefficient (105 cm−1). Synthesis methods of PSCs are considered, with solution-based manufacturing being the most cost-effective and common industrial method. Furthermore, this review identifies the issues impeding PSCs from large-scale commercialisation and the actions needed to resolve them. The main issue is stability as PSCs are particularly vulnerable to moisture, caused by the inherently weak bonds in the perovskite structure. Scalability of manufacturing is also a big issue as the spin-coating technique used for most laboratory-scale tests is not appropriate for large-scale production. This highlights the need for a transition to manufacturing techniques that are compatible with roll-to-roll processing to achieve high throughput. Finally, this review discusses future innovations, with the development of more environmentally friendly lead-free PSCs and high-efficiency multi-junction cells. Overall, this review provides a critical evaluation of the advances, opportunities and challenges of PSCs.

Fullerene binding effects in Al(III)/Zn(II) Porphyrin/Phthalocyanine photophysical properties and charge transport

We evaluate the fullerene C₆₀ binding effect; through the metal (Al) and through the ligand (Pc,TPP), on the photophysical and charge transport properties of M-porphyrin(TPP)/phthalocyanine(Pc) (M = Al(III), Zn(II)). We perform density functional theory (DFT) and time-dependent DFT calculations for the macrocycle-C₆₀ dyads, showing that all systems studied are thermodynamically favorable. The C₆₀ binding effect on the absorption spectrum is a red-shift of the Q and Soret (B) bands of TPPs and Pcs. The Pc-dyads show longer λ for Q bands (673 nm) than those with TPP (568 nm). AlTPP-C₆₀ and ZnTPP-C₆₀ show a more favorable electron injection to TiO₂ than the analogs Pcs, and the regeneration of the dye is preferred in AlTPP-C₆₀ and AlPc-C₆₀. Zero-bias conductance is computed (10^-4-10^-7 G₀) for the dyads using molecular junctions with Au(111)-based electrodes. When a bias voltage of around 0.6 V up to 1 V is applied, an increase in current is obtained for AlTPP-C₆₀ (10^-7 A), ZnTPP-C₆₀ (10^-7 A), and AlPc-C₆₀ (10^-8 A). Although there is not a unique trend in the behavior of the dyads, Pcs have better photophysical properties than TPPs and the latter are better in the charge transport. We conclude that AlTPP(ZnTPP)-C₆₀ dyads are an excellent alternative for designing new materials for dye-sensitized solar cells or optoelectronic devices.

TiO2 treatment using ultrasonication for bubble cavitation generation and efficiency assessment of a dye-sensitized solar cell

In this study, the impacts of different ultrasonic treatments on TiO₂ particles were determined and they were used to manufacture the photoelectrodes of a dye-sensitized solar cell (DSSC). Two methods were used to prepare TiO₂ particles directly sonicated by an ultrasonic horn, and TiO₂ treated indirectly by an ultrasonic cleaner. TEM, XPS analysis was confirmed that cavitation bubbles generated during ultrasonication resulted in defects on the surface of TiO₂ particles, and the defect induced surface activation. To understand the effect of TiO₂ surface activation on energy conversion efficiency of DSSC, ultrasonic horn DSSC and ultrasonic cleaner DSSC were prepared. The UV-vis analysis exhibited that the ultrasonic horn DSSC possessed higher dye adsorption when compared to the ultrasonic cleaner DSSC, and the EIS analysis confirmed that the electron mobility was greatly increased in the ultrasonic horn DSSC. The energy conversion efficiency of the ultrasonic horn DSSC was measured to be 3.35%, which is about 45% increase in comparison to that of the non-ultrasonic treated DSSC (2.35%). In addition to this regard, recombination resistance of ultrasonic horn DSSC was calculated to be 450 Ω·cm², increasing more than two times compared to the non-ultrasonic treated DSSC (200 Ω·cm²). Taken together, these ultrasonic treatments significantly improved the energy conversion efficiency of DSSC, which was not tried in DSSC-related research, and might lead us to develop more efficient practical route in the manufacturing of DSSC.

The donor-acceptor dyad based on high substituted fullero[70]pyrrolidine-coordinated manganese (III) phthalocyanine for photoinduced electron transfer

Donor-acceptor dyads based on manganese porphyrins/phthalocyanines and fullerene derivatives with N-basicity centers have proved as promising photoinduced electron-transfer systems for photovoltaic devices, biologically active compounds, and molecular magnetic materials. The macroheterocyclic chromophore characterized by rich UV-visible-near IR absorption is the basis for the applications above. The problem of the synthesis and the characterization of new effective dyads was solved in this work on the example of the self-organizing system consisting of (octakis-3,5-di-tert-butylphenoxy)phthalocyaninato)manganese(III) acetate, (AcO)MnPc(3,5-di-^tBuPhO)₈, 2',5-di(pyridin-2'-yl)-3,4-fullero[70]pyrrolidine, Py₂C₇₀, and toluene. The phthalocyanine-fullerene dyads in the molecular and cationic form (respectively (AcO)(Py₂C₇₀)MnPc(3,5-di-^tBuPhO)₈ and [(Py₂C₇₀)MnPc(3,5-di-^tBuPhO)₈]⁺(AcO)^-) were observed and described using the chemical kinetics/thermodynamics, UV-vis, IR, ¹H NMR spectroscopy and mass spectrometry methods. The 1: 1 stoichiometry of both dyads was confirmed; the equilibrium and rate constant value, K= (4.86 ± 0.56) × 10⁴ L mol^-1 and k = (4.455 ± 3.37) × 10^-5 s^-1 was observed for the formation of molecular and cationic dyad, respectively. The study of (AcO)MnPc(3,5-di-^tBuPhO)₈ and [(Py₂C₇₀)MnPc(3,5-di-^tBuPhO)₈]⁺AcO^- femtosecond transient absorption spectra points to the photoinduced electron transfer in the dyad, for which the lifetimes and the rate constants of charge separation (τ_CS, k_CS) and charge recombination (τ_CR, k_CR) were defined. The analysis of the relationship of the dyad physicochemical parameters with the molecular structure is represented using previously published data.

Hibiscus Leachate Dye-Based Low-Cost and Flexible Dye-Sensitized Solar Cell Prepared by Screen Printing

Although the price of dye-sensitized solar cells is lower than other solar cells, they still contain some high-cost materials, such as transparent conductive substrates, dyes (ruthenium dyes, organic dyes, etc.), and platinum counter electrodes. To solve this problem, a dye-sensitized solar cell based on hibiscus leaching solution and carbon black–silver electrodes was prepared by screen printing. The prepared low-cost dye-sensitized solar cells were flexible. The open-circuit voltage (V_oc) of the obtained dye-sensitized solar cell is 0.65 V, the current density (J_sc) is 90 μA/cm², and the fill factor (FF) is 0.241.

A three-shell supramolecular complex enables the symmetry-mismatched chemo- and regioselective bis-functionalization of C60

Molecular Russian dolls (matryoshkas) have proven useful for testing the limits of preparative supramolecular chemistry but applications of these architectures to problems in other fields are elusive. Here we report a three-shell, matryoshka-like complex-in which C₆₀ sits inside a cycloparaphenylene nanohoop, which in turn is encapsulated inside a self-assembled nanocapsule-that can be used to address a long-standing challenge in fullerene chemistry, namely the selective formation of a particular fullerene bis-adduct. Spectroscopic evidence indicates that the ternary complex is sufficiently stable in solution for the two outer shells to affect the addition chemistry of the fullerene guest. When the complex is subjected to Bingel cyclopropanation conditions, the exclusive formation of a single trans-3 fullerene bis-adduct was observed in a reaction that typically yields more than a dozen products. The selectivity facilitated by this matryoshka-like approach appears to be a general phenomenon and could be useful for applications where regioisomerically pure C₆₀ bis-adducts have been shown to have superior properties compared with isomer mixtures.

Accurate Prediction of the Excited States in the Fully Conjugated Porphyrin Tapes across the Full Spectral Range: A Story of the Interplay between π-π* and Intramolecular Charge-Transfer Transitions in Soft Chromophores

The ability of density functional theory (DFT) and time-dependent DFT (TDDFT) methods for the accurate prediction of the energies and oscillator strengths of the excited states in a series of fully conjugated meso-meso β-β β-β triple-linked porphyrin oligomers (porphyrin tapes 2-12) was probed in the gas phase and solution using several exchange-correlation functionals. It was demonstrated that the use of the hybrid B3LYP functional provides a good compromise for the accurate prediction of the localized π-π* and intramolecular charge-transfer transitions, thus allowing confident interpretation of the UV-vis-NIR spectra of porphyrin oligomers. The TDDFT-based sum-over-state (SOS) calculations for the porphyrin tape dimer 2 and trimer 3 as well as parent monomer 1 correctly predicted the signs and shapes of the magnetic circular dichroism (MCD) signals in the low-energy region of the spectra.

Electrically Enhanced Transition Metal Dichalcogenides as Charge Transport Layers in Metallophthalocyanine-Based Solar Cells

Transitional metal dichalcogenides (TMDs), such as molybdenum disulfide (MoS2) have found application in photovoltaic cells as a charge transporting layer due to their high carrier mobility, chemical stability, and flexibility. In this research, a photovoltaic device was fabricated consisting of copper phthalocyanine (CuPc) as the active layer, exfoliated and Au-doped MoS2, which are n-type and p-type as electron and hole transport layers, respectively. XRD studies showed prominent peaks at (002) and other weak reflections at (100), (103), (006), and (105) planes corresponding to those of bulky MoS2. The only maintained reflection at (002) was weakened for the exfoliated MoS2 compared to the bulk, which confirmed that the material was highly exfoliated. Additional peaks at (111) and (200) planes were observed for the Au doped MoS2. The interlayer spacing (d002) was calculated to be 0.62 nm for the trigonal prismatic MoS2 with the space group P6m2. Raman spectroscopy showed that theE 2 1 g (393 cm-1) and A1g (409 cm-1) peaks for exfoliated MoS2 are closer to each other compared to their bulk counterparts (378 and 408 cm-1, respectively) hence confirming exfoliation. Raman spectroscopy also confirmed doping of MoS2 by Au as the Au-S peak was observed at 320 cm-1. Exfoliation was further confirmed by SEM as when moving from bulky to exfoliated MoS2, a single nanosheet was observed. Doping was further proven by EDS, which detected Au in the sample suggesting the yield of a p-type Au-MoS2. The fabricated device had the architecture: Glass/FTO/Au-MoS2/CuPc/MoS2/Au. A quadratic relationship between I-V was observed suggesting little rectification from the device. Illuminated I-V characterization verified that the device was sensitive and absorbed visible light. Upon illumination, the device was able to absorb photons to create electron-hole pairs and it was evident that semipermeable junctions were formed between Au-MoS2/CuPc and CuPc/MoS2 as holes and electrons were extracted and separated at respective junctions generating current from light. This study indicates that the exfoliated and Au-MoS2 could be employed as an electron transporting layer (ETL) and hole transporting layer (HTL), respectively in fabricating photovoltaic devices.

Cause, Regulation and Utilization of Dye Aggregation in Dye-Sensitized Solar Cells

As an important member of third generation solar cell, dye-sensitized solar cells (DSSCs) have the advantages of being low cost, having an easy fabrication process, utilizing rich raw materials and a high-power conversion efficiency (PCE), prompting nearly three decades as a research hotspot. Recently, increasing the photoelectric conversion efficiency of DSSCs has proven troublesome. Sensitizers, as the most important part, are no longer limited to molecular engineering, and the regulation of dye aggregation has become a widely held concern, especially in liquid DSSCs. This review first presents the operational mechanism of liquid and solid-state dye-sensitized solar cells, including the influencing factors of various parameters on device efficiency. Secondly, the mechanism of dye aggregation was explained by molecular exciton theory, and the influence of various factors on dye aggregation was summarized. We focused on a review of several methods for regulating dye aggregation in liquid and solid-state dye-sensitized solar cells, and the advantages and disadvantages of these methods were analyzed. In addition, the important application of quantum computational chemistry in the study of dye aggregation was introduced. Finally, an outlook was proposed that utilizing the advantages of dye aggregation by combining molecular engineering with dye aggregation regulation is a research direction to improve the performance of liquid DSSCs in the future. For solid-state dye-sensitized solar cells (ssDSSCs), the effects of solid electrolytes also need to be taken into account.

An approach to the photocatalytic mechanism in the TiO2-nanomaterials microorganism interface for the control of infectious processes

The approach of this timely review considers the current literature that is focused on the interface nanostructure/cell-wall microorganism to understand the annihilation mechanism. Morphological studies use optical and electronic microscopes to determine the physical damage on the cell-wall and the possible cell lysis that confirms the viability and microorganism death. The key parameters of the tailoring the surface of the photoactive nanostructures such as the metal functionalization with bacteriostatic properties, hydrophilicity, textural porosity, morphology and the formation of heterojunction systems, can achieve the effective eradication of the microorganisms under natural conditions, ranging from practical to applications in environment, agriculture, and so on. However, to our knowledge, a comprehensive review of the microorganism/nanomaterial interface approach has rarely been conducted. The final remarks point the ideal photocatalytic way for the effective prevention/eradication of microorganisms, considering the resistance that the microorganism could develop without the appropriate regulatory aspects for human and ecosystem safety.

Push-Pull Zinc Phthalocyanine Bearing Hexa-Tertiary Substituted Carbazolyl Donor Groups for Dye-Sensitized Solar Cells

An asymmetrical, push–pull phthalocyanine bearing bulky tert-butylcarbazolyl moieties as electron donor and carboxylic acid as anchoring group was synthetized and tested as a photosensitizer in dye-sensitized solar cells (DSSC). The new photosensitizer was characterized by 1H and 13C NMR, UV–Vis and mass spectrometry. The bulky tert-butylcarbazolyl moieties avoid the aggregation of the phthalocyanine dye. DFT studies indicate that the HOMO is delocalized throughout the π-electron system of the substituted phthalocyanine and the LUMO is located on the core of the molecule with a sizable electron density distribution on carboxyl groups. The new dye has been used as a photosensitizer in transparent and opaque dye-sensitized solar cells, which exhibit poor efficiencies related to a low Jsc.

Structural studies and photovoltaic investigation of indolo[2,3-b]quinoxaline-based sensitizers/co-sensitizers achieving highly efficient DSSCs

Novel organic sensitizers were designed and synthesized by employing indolo[2,3-b]quinoxaline (IQ) as the main building block. IPCE graphs indicated that both competition and compensation of photon harvesting co-exist during the co-sensitization.

Naphthalene imides as novel p-type sensitizers for NiO-based p-type dye-sensitized solar cells

We report two efficient materials for p-type dye-sensitized solar cells, namely S64 and S85. Novel p-type photosensitizers for NiO-based p-type dye-sensitized solar cells are presented in this study.

Single hydroxo-bridged group 13 metalloporphyrin dimers: Solution studies and solid-state structures

The syntheses of indium, gallium and aluminum porphyrin dimers with a single hydroxo-bridge, [Formula: see text][M(Porph)]2(OH)[Formula: see text], are described. Emphasis is given to indium and gallium derivatives. The X-ray structures for [Formula: see text] [Ga(OEP)]2(OH)[Formula: see text] ClO4 and [Formula: see text] [In(OEP)]2(OH)[Formula: see text] ClO4 (two forms) are presented. The dimeric molecules can be synthesized by the acid-treatment of the corresponding hydroxo-ligated monomeric complexes [M(OEP)(OH)] and [M(TPP)(OH)]. The nature of the starting material (the hydroxo-ligated monomer) was first suggested by IR spectroscopy and further proved by proton-deuterium exchange followed by 1H NMR spectroscopy. The structure of a monomeric indium hydroxide complex, [In(OEP)(OH)], is also presented. The synthesis of the dimer for all metals can be monitored by UV-vis spectroscopy, which clearly demonstrates that a blue-shift of the Soret band accompanies formation of the dimer from the monomer. A strong [Formula: see text]–[Formula: see text]interaction between the two porphyrin rings of these [Formula: see text]-hydroxo-bridged dimers is confirmed both by solution state studies (1H NMR and UV-vis spectroscopy) and the X-ray structures of [Formula: see text] [M(OEP)]2(OH)[Formula: see text] ClO4 (M = In, Ga). In addition, exposure of methylene chloride solutions of these bridged complexes to white light afforded the corresponding chloro derivatives, [M(Porph)Cl]. The stereochemistry of a range of [Formula: see text]-hydroxo dimers is discussed and DFT simulations at the HSEH1PBE/SDD level of theory provide suitable structural models and further electronic structure insights on selected [Ga(Porph)(OH)] and [Formula: see text] [Ga(Porph)]2(OH)[Formula: see text][Formula: see text] derivatives.

Effect of thienyl units in cyanoacrylic acid derivatives toward dye-sensitized solar cells

A series of heterocyclic donor-acceptor systems were synthesized and well characterized by using ¹H, ¹³C NMR, FT-IR, and elemental analysis. They were designed to investigate the effect of thiophene and cyanoacrylic acid number units on the thermal, optical, electrochemical and finally photovoltaic properties of dye-sensitized solar cells prepared with the selected compounds. The effect of chemical structure on their properties was demonstrated. They showed the beginning of thermal decomposition between 230 and 270 °C. The compounds absorbed the radiation in the range of 300-500 nm or 200-400 nm. They were electrochemically active and varied in energy band gap from 3.40 to 1.58 eV. Additionally, their optimized geometry, HOMO-LUMO levels, ionization potential, and electron affinity were evaluated using density functional theory. The photovoltaic devices based on TiO₂ sensitized with the obtained molecules exhibited low power conversion efficiency, which was the highest for the device containing the symmetrical molecule with bithiophene structure. Under co-sensitization, the cell made of the same compound gave significant enhancement of efficiency of 6.3% being higher to that of the individual device prepared from dye N719 (5.75%). Moreover, the effects of immersion time of TiO₂ electrode in the dye solution and co-sensitization methods were tested. The surface morphology of photoanode was investigated using atomic force microscopy.

Role of hexyloxy groups in zinc phthalocyanines bearing sulfonic acid anchoring groups for dye-sensitized solar cells

Zinc phthalocyanine dyes bearing four sulfonic acid anchoring groups with (A-ZnPc) and without (H-ZnPc) four chloro and eight hexyloxy groups were used as sensitizers for dye-sensitized solar cells (DSSCs). The dyes were investigated in terms of their optical, electrochemical and photovoltaic properties. The presence of these groups in dye A-ZnPc resulted in both red-shifted absorption and decreased dye aggregation, which are beneficial for the improvement of device performance. In the presence of chenodeoxycholic acid (CDCA) as a coadsorbent, the DSSC based on H-ZnPc shows a power conversion efficiency (PCE) of 0.96%, which is improved by [Formula: see text]40% as compared to the device without CDCA. However, the PCE of an A-ZnPc-based device with CDCA slightly enhances from 1.15% (without CDCA) to 1.22%, indicating that the bulky hexyloxy groups with large steric hindrance can effectively suppress aggregation of the adsorbed dye. The results showed that the zinc phthalocyanine dye bearing bulky hexyloxy groups is a promising candidate to construct efficient coadsorbent-free DSSCs.

The Applications of Polymers in Solar Cells: A Review

The emerging dye-sensitized solar cells, perovskite solar cells, and organic solar cells have been regarded as promising photovoltaic technologies. The device structures and components of these solar cells are imperative to the device’s efficiency and stability. Polymers can be used to adjust the device components and structures of these solar cells purposefully, due to their diversified properties. In dye-sensitized solar cells, polymers can be used as flexible substrates, pore- and film-forming agents of photoanode films, platinum-free counter electrodes, and the frameworks of quasi-solid-state electrolytes. In perovskite solar cells, polymers can be used as the additives to adjust the nucleation and crystallization processes in perovskite films. The polymers can also be used as hole transfer materials, electron transfer materials, and interface layer to enhance the carrier separation efficiency and reduce the recombination. In organic solar cells, polymers are often used as donor layers, buffer layers, and other polymer-based micro/nanostructures in binary or ternary devices to influence device performances. The current achievements about the applications of polymers in solar cells are reviewed and analyzed. In addition, the benefits of polymers for solar cells, the challenges for practical application, and possible solutions are also assessed.

Rapid evaluation of different perovskite absorber layers through the application of depth profile analysis using glow discharge - Time of flight mass spectrometry

Depth profile analysis of perovskite absorber layers deposited onto glass substrates is investigated by radiofrequency pulsed glow discharge - time of flight mass spectrometry (rf-PGD-ToFMS). Elemental depth profiles obtained for perovskite films fabricated using a double-step deposition route with different precursors (methylammonium iodide and PbI₂, PbCl₂ or PbBr₂) show varying distribution of the principle components depending on the precursors employed. Furthermore, the results show that rf-PGD-ToFMS allows to identify traces of residue solvent used in the initial film preparation (dimethyl sulphoxide or dimethylformamide) and to identify differences produced by film thickness and oxygen uptake caused by exposure to ambient conditions. The approach also enables inspection of the differences in elemental diffusion and the degradation processes. By using rf-PGD-ToFMS, no ultra-high-vacuum is needed for processing and rapid analysis of absorber films can be obtained in less than 40 s. The demonstration of such powerful analytical technique for obtaining depth profile information could enable groups in the field to better optimize processing conditions and enhance stability.

Effect of new asymmetrical Zn(ii) phthalocyanines on the photovoltaic performance of a dye-sensitized solar cell

Theoretical and experimental examinations of novel asymmetric Zn(ii) phthalocyanine derivatives substituted with peripherally one carboxyl and six alkylsulfanyl groups have been successfully investigated from the point of view of DSSC performance.

Porphyrin-sensitized solar cells: systematic molecular optimization, coadsorption and cosensitization

As a promising low-cost solar energy conversion technique, dye-sensitized solar cells have undergone spectacular development since 1991. For practical applications, improvement of power conversion efficiency has always been one of the major research topics. Porphyrins are outstanding sensitizers endowed with strong sunlight harvesting ability in the visible region and multiple reaction sites available for functionalization. However, judicious molecular design in consideration of light-harvest, energy levels, operational dynamics, adsorption geometry and suppression of back reactions is specifically required for achieving excellent photovoltaic performance. This feature article highlights some of the recently developed porphyrin sensitizers, especially focusing on the systematic dye structure optimization approach in combination with coadsorption and cosensitization methods in pursuing higher efficiencies. Herein, we expect to provide more insights into the structure-performance correlation and molecular engineering strategies in a stepwise manner.

Singlet oxygen quantum yields and photostability of planar binuclear phthalocyanines

The singlet oxygen ([Formula: see text]O[Formula: see text] quantum yield of the near-infrared absorbing ([Formula: see text] [Formula: see text] 839 nm) planar [Formula: see text]-conjugated binuclear zinc phthalocyanine (ZnPc) was measured and compared to the [Formula: see text]O[Formula: see text] quantum yields of the mononuclear and the planar binuclear phthalocyanine without [Formula: see text]-conjugation between Pc rings. In addition, the photooxidative stability of the [Formula: see text]-conjugated binuclear Pc was determined and compared to the stabilities of the mononuclear ZnPc and the known near-infrared photosensitizer, zinc tetra-tert-butylnaphthalocyanine ([Formula: see text] 761 nm). The results are explained by DFT calculations and cyclic voltammetry.

Triphenylamine derived titanium oxo clusters: an approach to effective organic–inorganic hybrid dyes for photoactive electrodes

Titanium oxo clusters (TOCs) anchored with photoactive triphenylamine dyes are reported for the first time. They are unusual TOCs modified with real applied dyes. Using these TPA dye pre-anchored TOCs as organic–inorganic hybrid dyes has advantages for DSSC applications.

Dual emissive bodipy–benzodithiophene–bodipy TICT triad with a remarkable Stokes shift of 194 nm

An acceptor–donor–acceptor (A–D–A) triad based on BODIPY and benzodithiophene exhibited a high Stokes shift of ∼194 nm, TICT and high mobility of 4.46 × 10⁻⁴ cm² V⁻¹ s⁻¹.

Synthesis of alkylthio substituted pyridoporphyrazines and their photophysicochemical properties

Phthalocyanine and their related compounds are utilized as various applications, such as photosensitizing agents for photodynamic therapy of cancer. In this study, zinc bis(thiodidecylbenzo)-bis(pyrido)porphyrazines, especially zinc bis(1,4-didecylthiobenzo)-bis(3,4-pyrido)porphyrazine and zinc bis(1,4-didecylthiobenzo)-bis(2,3-pyrido)porphyrazine were synthesized. Quaternation of the pyridine nitrogen in these provides an amphiphilic property. Photoexcited triplet lifetime of synthesized and quaternized zinc bis(1,4-didecylthiobenzo)-bis(3,4-pyrido)porphyrazine and zinc bis(1,4-didecylthiobenzo)-bis(2,3-pyrido)porphyrazine were reported using laser-flash photolysis and singlet oxygen quantum yields by the 1,3-diphenylisobenzofurne method.

Self-sorted Oligophenylvinylene and Perylene Bisimide Hydrogels

We describe two component hydrogels with networks composed of self-sorted fibres. The component gelators are based on 1,4-distyrylbenzene (OPV3) and perylene bisimide (PBI) units. Self-sorted gels can be formed by a slow decrease in pH, which leads to sequential assembly. We demonstrate self-sorting by NMR, rheology and small angle X-ray scattering (SAXS). Photoconductive xerogels can be prepared by drying these gels. The wavelength response of the xerogel is different to that of the PBI alone.

Solar Cell Materials by Design: Hybrid Pyroxene Corner-Sharing VO4 Tetrahedral Chains

Hybrid organic-inorganic frameworks provide numerous combinations of materials with a wide range of structural and electronic properties, which enable their use in various applications. In recent years, some of these hybrid materials-especially lead-based halide perovskites-have been successfully used for the development of highly efficient solar cells. The large variety of possible hybrid materials has inspired the search for other organic-inorganic frameworks that may exhibit enhanced performance over conventional lead halide perovskites. In this study, a new class of low-dimensional hybrid oxides for photovoltaic applications was developed by using electronic structure calculations in combination with analysis from existing materials databases, with a focus on vanadium oxide pyroxenes (tetrahedron-based frameworks), mainly due to their high stability and nontoxicity. Pyroxenes were screened with different cations [A] and detailed computational studies of their structural, electronic, optical and transport properties were performed. Low-dimensional hybrid vanadate pyroxenes [A]VO₃ (with molecular cations [A] and corner-sharing VO₄ tetrahedral chains) were found to satisfy all physical requirements needed to develop an efficient solar cell (a band gap of 1.0-1.7 eV, strong light absorption and good electron-transport properties).