Proton Conducting Metal-Organic Frameworks (MOFs) via Post Synthetic Transmetallation and Water Induced Structural Transformations

Post Synthetic Modification (PSM) of Metal-Organic Frameworks (MOFs) is a crucial strategy for developing new MOFs with enhanced functional properties compared to their parent one. PSM can be accomplished through various methods:1) modification of organic linkers; 2) exchange of metal ions or nodes; and 3) inclusion or exchange of solvent/guest molecules. Herein, PSM of bimetallic and monometallic MOFs containing biphenyl dinitro-tetra-carboxylates (NCA) are demonstrated. The tetra carboxylate NCA, produces monometallic Cd-MOF-1 and Cu-MOF-1 and bimetallic CoZn-MOF in solvothermal reactions with the corresponding metal salts. The CoZn-MOF undergoes post-synthetic transmetallation with Cd(NO3)2 and Cu(NO3)2 in aqueous solution to yield Cd-MOF-2 and Cu-MOF-2, respectively. Additionally, green crystals of Cu-MOF-1 found to undergo a single-crystal-to-single-crystal (SCSC) transformation to blue crystals of Cu-MOF-3 upon dipped into water at room temperature. These MOFs demonstrate notable proton conductivities ranging from 10-3 to 10-4 S cm-1 under variable temperatures and humidity levels. Among them, Cu-MOF-3 achieves the highest proton conductivity of 1.36×10-3 S cm-1 at 90 °C and 98 % relative humidity, attributed to its continuous and extensive hydrogen bonding network, which provides effective proton conduction pathways within the MOF. This work highlights a convenient strategy for designing proton-conducting MOFs via post-synthetic modification.

Water vapour induced reversible switching between a 1-D coordination polymer and a 0-D aqua complex

[Zn(3-tba)2], 1, a 1-D coordination polymer synthesised as 1·DMA, 1α, transformed to a nonporous form, 1β upon activation. 1β underwent further transformation to the dimeric complex [Zn(3-tba)2(H2O)2], 2, above 40%...

Metal-Organic Framework Nanoparticles Induce Pyroptosis in Cells Controlled by the Extracellular pH

Ion homeostasis is essential for cellular survival, and elevated concentrations of specific ions are used to start distinct forms of programmed cell death. However, investigating the influence of certain ions on cells in a controlled way has been hampered due to the tight regulation of ion import by cells. Here, it is shown that lipid-coated iron-based metal-organic framework nanoparticles are able to deliver and release high amounts of iron ions into cells. While high concentrations of iron often trigger ferroptosis, here, the released iron induces pyroptosis, a form of cell death involving the immune system. The iron release occurs only in slightly acidic extracellular environments restricting cell death to cells in acidic microenvironments and allowing for external control. The release mechanism is based on endocytosis facilitated by the lipid-coating followed by degradation of the nanoparticle in the lysosome via cysteine-mediated reduction, which is enhanced in slightly acidic extracellular environment. Thus, a new functionality of hybrid nanoparticles is demonstrated, which uses their nanoarchitecture to facilitate controlled ion delivery into cells. Based on the selectivity for acidic microenvironments, the described nanoparticles may also be used for immunotherapy: the nanoparticles may directly affect the primary tumor and the induced pyroptosis activates the immune system.

A 116-Nuclear Metallosupramolecular Cage-of-Cage Showing Multistep Single-Crystal-to-Single-Crystal Transformation

Here a unique single-crystal-to-single-crystal (SCSC) transformation of a 116-nuclear Au^I ₇₂ Cd^II ₄₀ Na^I ₄ cage-of-cage (2_CdNa ) is reported, which was created from a trigold(I) metalloligand with d-penicillamine by way of a 9-nuclear Au^I ₆ Cd^II ₃ cage (1). Cage-of-cage 2_CdNa is composed of 12 cages of 1 that are linked by 4 Cd²⁺ and 4 Na⁺ ions, with its surface being covered by 12 NO₃ ^- ions to form a discrete, spherical molecule with a diameter ca. 4.7 nm. In crystal 2_CdNa , the cage-of-cage molecules are packed in a cubic lattice with a huge cell volume of ca. 4.5×10⁵  ų _, so as to have large interstices with diameters of more than 3 nm. Upon soaking crystals 2_CdNa in aqueous Cu(NO₃ )₂ , all Cd²⁺ and Na⁺ were quickly exchanged by Cu²⁺ to produce an analogous Au^I ₇₂ Cu^II ₄₄ cage-of-cage (2_Cu ) in a SCSC manner. Prolonged soaking led to the SCSC transformation to another supramolecular structure (2'_Cu ) consisting of 152-nuclear Au^I ₇₂ Cu^II ₈₀ cage-of-cages that are alternately H-bonded with the Au^I ₇₂ Cu^II ₄₄ cage-of-cages. 2'_Cu showed the accommodation of MoO₄ ^2- and the conversion of MoO₄ ^2- to β-Mo₈ O₂₆ ^4- in the crystal, with retention of single-crystallinity.

Accordion and layer-sliding motion to produce anomalous thermal expansion behaviour in 2D-coordination polymers

Solvent-free (1) and solvated (2) 2D-coordination polymers have been synthesised by varying the amount of solvent during crystallisation. 1 undergoes a unique accordion motion of 2D zig-zag interwoven layers whereas 2 experiences layer-sliding within 2D layers to produce anomalous thermal expansion behaviour.

A quantitative transmetalation with a metal organic framework compound in a solid–liquid interface reaction: synthesis, structure, kinetics, spectroscopy and electrochemistry

A Zn(ii)-MOF (1) can be transformed to its isomorphous Cu(ii)-MOF (2) quantitatively in a single crystal to single crystal metal exchange process in a solid–liquid interface reaction.

Giant Hysteretic Sorption of CO2 : In Situ Crystallographic Visualization of Guest Binding within a Breathing Framework at 298 K

A dynamic Zn^II -MOF has been shown to exhibit extreme breathing behavior under gas pressure. The very narrow pore form of the activated framework opens up in the presence of carbon dioxide, thus making it a suitable material for CO₂ capture. Sorption of CO₂ at 298 K and relatively high pressure clearly shows a two-step isotherm with giant hysteresis for the second step. In-situ single-crystal diffraction analysis was carried out under CO₂ gas pressure at 298 K using an environmental gas cell in order to visualize the interaction between CO₂ and the host framework. The results are well supported by pressure-gradient differential scanning calorimetry (P-DSC) and variable-pressure powder X-ray analysis. Theoretical calculations have been carried out in order to further back up the crystallographic data.

Structural Transformations of Amino-Acid-Based Polymers: Syntheses and Structural Characterization

A discrete complex [Zn(tpro)₂(H₂O)₂] (1, Htpro = l-thioproline), and two structural isomers of coordination polymers, a 1D chain of [Zn(tpro)₂]_n (2) and a layered structure [Zn(tpro)₂]_n (3), were synthesized and characterized. The discrete complex 1 undergoes a temperature-driven structural transformation, leading to the formation of a 1D helical coordination polymer 2. Compound 3 is comprised of a 2D homochiral layer network with a (4,4) topology. These layers are mutually linked through hydrogen bonding interactions, resulting in the formation of a 3D network. When 1 is heated, it undergoes nearly complete conversion to the microcrystalline form, i.e., compound 2, which was confirmed by powder X-ray diffractions (PXRD). The carboxylate motifs could be activated after removing the coordinated water molecules by heating at temperatures of up to 150 °C, their orientations becoming distorted, after which, they attacked the activation sites of the Zn(II) centers, leading to the formation of a 1D helix. Moreover, a portion of the PXRD pattern of 1 was converted into the patterns corresponding to 2 and 3, and the ratio between 2 and 3 was precisely determined by the simulation study of in-situ synchrotron PXRD expriments. Consequently, such a 0D complex is capable of underdoing structural transformations and can be converted into 1D and/or 2D amino acid-based coordination polymers.

Development of Isostructural Porphyrin-Salen Chiral Metal-Organic Frameworks through Postsynthetic Metalation Based on Single-Crystal to Single-Crystal Transformation

The development of well-defined multimetallic porous metal-organic frameworks (MOFs) will add a new dimension to the application of MOF catalysis. From this perspective, the understanding and tailoring of the catalytic metal sites in MOFs are key fundamental challenges that could reveal the intrinsic potential of these materials. In this work, a series of porphyrin-salen chiral MOFs (ps-CMOFs 2-7) have been synthesized through postsynthetic metalation (PSMet) of the parent ps-CMOF via single-crystal to single-crystal transformation. Crystal structures of these ps-CMOF analogues revealed the same topological structure but varied metal entities compared to those of the parent framework. Note that the PSMet process involves three methods involving cation exchange at the nodes, cation exchange at the metalated porphyrin, and cation addition at the free porphyrin, which has been systematically investigated using single-crystal X-ray diffraction and other physicochemical methods. The N₂ adsorption tests, thermogravimetric analysis, and powder X-ray diffraction of 2-7 showed curves or patterns similar to those of 1, indicating the maintenance of the crystallinity, porosity, and thermal stability of the framework during the PSMet process. In addition, 2-7 showed distinctly improved adsorption capacities and isosteric heats of adsorption (Q_st) for CO₂ compared to those of their parent counterpart. Lastly, as a representative example of the ps-CMOF catalytic platform, 5 proved to be an efficient recyclable heterogeneous catalyst for the asymmetric addition reaction of CO₂ with epoxides under mild conditions. Furthermore, because of the constrained chiral environment within ps-CMOF, the enantioselectivity of this reaction appears to be dependent on substrate size.

A novel polyhedron-based metal–organic framework with high performance for gas uptake and light hydrocarbon separation

A novel Zn-PMOF with high density of OMSs and LBSs was successfully assembled by the SBBs strategy and exhibited high performance for the capture and separation of CO₂ and C₃H₈ over CH₄.

A uranyl phosphonate framework with a temperature-induced order–disorder transition and temperature-correlated photoluminescence

UPF-1 experiences a thermally induced order–disorder transition, leading to a negative linear correlation between the photoluminescence intensity and temperature, and may find application as a luminescent thermometer.

Single-crystal-to-single-crystal (SCSC) transformation and dissolution–recrystallization structural transformation (DRST) among three new copper(ii) coordination polymers

Three new copper(ii) complexes with single-crystal-to-single-crystal (SCSC) transformation and dissolution–recrystallization structural transformation (DRST) have been synthesized and fully characterized.

Kinetic and Thermodynamic Control of Structure Transformations in a Family of Cobalt(II)-Organic Frameworks

Dynamic metal-organic frameworks (MOFs) that respond to external stimuli have recently attracted great attention. However, the subtle control of dynamic processes as well as the illustration of the underlying mechanism, which is crucial for the targeted construction and modulation purpose, is extremely challenging. Herein, we report the achievement of simultaneous kinetic and thermodynamic modulation of the structure transformation processes of a family of cobalt(II)-organic frameworks, through the rational combination of coligand replacement, solvent molecule substitution, and ligand-based solid solution strategies. On the basis of the systematic investigation of the structural transformation behaviors, the underlying response mechanism and principles for modulation were illustrated. It is expected that this work can provide valuable hints for the study and further development of dynamic materials.

Water-Mediated Structural Transformations of CuII 5-Halonicotinates Coordination Networks with Distinct Mechanisms

Currently, no unequivocal evidence is given for elucidation of "black box" during the structural transformations of dynamic crystalline materials. Here, three types of mechanisms are revealed for such transformations through X-ray diffraction and optical microscopy; namely, single-crystal to single-crystal (SC-SC), as well as "core-to-core" and "core-on-shell" processes. As confirmed by time-lapse optical microscopy, the latter two cases can be properly ascribed as partial recrystallization processes, while the former one is a continuous process with two different crystal lattices simultaneously maintained in one single crystal. Interestingly, these three distinct pathways can be exquisitely realized by changing only the halogen substituent (from -F, -Cl, to -Br) of the organic ligands in the coordination supramolecular systems.

A porous two-dimensional Zn(ii)-coordination polymer exhibiting SC–SC transmetalation with Cu(ii): efficient heterogeneous catalysis for the Henry reaction and detection of nitro explosives

The 2D Zn(ii)-CP, 1Zn and its Cu-analogue 1Cu exhibit efficient catalytic activity for the Henry reaction. 1Zn can be utilized for detecting trace amounts of nitro explosives in DMSO.

Hydration-dependent anomalous thermal expansion behaviour in a coordination polymer

A polar coordination polymer has been synthesised that exhibits anomalous anisotropic thermal expansion. The guest water molecules of the as-synthesised complex can be removed on activation without loss of crystal singularity to yield the fully dehydrated form that shows considerably different thermal expansion behaviour compared to its hydrated analogue.

Isolation of a structural intermediate during switching of degree of interpenetration in a metal-organic framework

A known pillared layered metal-organic framework [Co2(ndc)2(bpy)] is shown to undergo a change in degree of interpenetration from a highly porous doubly-interpenetrated framework (2fa) to a less porous triply-interpenetrated framework (3fa). The transformation involves an intermediate empty doubly-interpenetrated phase (2fa') which has been isolated for the first time for this kind of phenomenon by altering the conditions of activation of the as-synthesized material. Interestingly, all the transformations occur in single-crystal to single-crystal fashion. Changes in degree of interpenetration have not been explored much to date and their implications with regard to the porosity of MOFs still remain largely unknown. The present study not only provides a better understanding of such dramatic structural changes in MOF materials, but also describes an original way of controlling interpenetration by carefully optimizing the temperature of activation. In addition to studying the structural mechanism of conversion from 2fa to 3fa, sorption analysis has been carried out on both the intermediate (2fa') and the triply-interpenetrated (3fa) forms to further explain the effect that switching of interpenetration mode has on the porosity of the MOF material.

Single-crystal-to-single-crystal transformation of an anion exchangeable dynamic metal–organic framework

A 3D cationic Metal–Organic Framework has been fabricated with a neutral N-donor ligand and Cd(ClO₄)₂ which shows guest triggered dynamic behaviour at room temperature. This structural dynamism has been demonstrated from the SCSC transformation experiment.

Solvent diffusion through a non-porous crystal ‘caught in the act’ and related single-crystal-to-single-crystal transformations in a cationic dinuclear Ag(i) complex

A few snapshots of a dynamic solvent diffusion process through a seemingly non-porous crystal of a dinuclear, cyclic Ag(i) complex were revealed. These indicate the complexity of the process, which involves not only relocation of the molecules in the crystal lattice, but also conformational adjustments of the metallocycles in response to solvent uptake/release.

Guest dependent reversible single-crystal to single-crystal structural transformation in a flexible Gd(iii)-coordination polymer

We describe a 3D flexible Gd(iii)-coordination polymer, constructed from a linear carboxylate ligand, which shows reversible single-crystal to single-crystal “guest-responsive fitting” of the channels and carboxylate shift process, upon inclusion of aldehyde guests.