Luminescence Nanothermometry: Investigating Thermal Memory in UiO-66-NH2 Nanocrystals

Metal-organic frameworks (MOFs), a diverse and rapidly expanding class of crystalline materials, present many opportunities for various applications. Within this class, the amino-functionalized Zr-MOF, namely, UiO-66-NH2, stands out due to its distinctive chemical and physical properties. In this study, we report on the new unique property where UiO-66-NH2 nanocrystals exhibited enhanced fluorescence upon heating, which was persistently maintained postcooling. To unravel the mechanism, the changes in the fluorescence signal were monitored by steady-state fluorescence spectroscopy, lifetime measurements, and a fluorescence microscope, which revealed that upon heating, multiple mechanisms could be contributing to the observed enhancement; the MOFs can undergo disaggregation, resulting in a fluorescent enhancement of the colloidally stable MOF nanocrystals and/or surface-induced phenomena that result in further fluorescence enhancement. This observed temperature-dependent photophysical behavior has substantial applications. It not only provides pathways for innovations in thermally modulated photonic applications but also underscores the need for a better understanding of the interactions between MOF crystals and their environments.

Effect of amino functional groups on the surface properties and Lewis's acid base parameters of UiO-66(NH2) by inverse gas chromatography

Amino-functionalized metal organic frameworks (MOFs) have attracted much attention for various applications such as carbon dioxide capture, water remediation and catalysis. The focus of this study is to determine the surface and Lewis's acid-base properties of UiO-66(NH2) crystals by the inverse gas chromatography (IGC) technique at infinite dilution. The latter was applied to evaluate the dispersive component of the surface energy γ s d ( T ) by using thermal model and several molecular models. The obtained results proved that γ s d ( T ) decreases when the temperature increases. The best results were achieved by using the thermal model that takes into account the effect of the temperature on the surface areas of the organic molecules. We also observed a decrease of the Gibbs surface free energy of adsorption by increasing the temperature of the different organic solvents. The polar interactions of UiO-66(NH2) were obtained by using the methods of Saint-Flour Papirer, Donnet et al., Brendlé-Papirer and the different molecular models. The Lewis's acid base constants K A and K D were further calculated by determining the different variables of adsorption of the probes on the solid surface and the obtained values were 1.07 and 0.45 for K A and K D respectively, with an acid-base ratio (KA/KD) of 2.38. These values showed the high acidic surface of the solid substrate; whereas, the values of the entropic acid base parameters, ω A , ω D and ω A / ω D respectively equal to 1.0 × 10 - 3 , 3.8 × 10 - 4 and 2.73 , also highlighted the important acidity of UiO-66-(NH2) surface. These important findings suggest that the surface defects (missing linkers and/or clusters) in UiO-66(NH2) are the main determining factor of the acid-base properties of UiO-66 based structures.

A promising sensing platform for explosive markers: Zeolite-like metal-organic framework based monolithic composite as a case study

Preconcentration for on-site detection or subsequent determination is a promising technique for selective sensing explosive markers at low concentrations. Here, we report divinylbenzene monolithic polymer in its blank form (neat-DVB) and as a composite incorporated with sodalite topology zeolite-like metal-organic frameworks (3-ZMOF@DVB), as a sensitive, selective, and cost-effective porous preconcentrator for aliphatic nitroalkanes in the vapor phase as explosive markers at infinite dilution. The developed materials were fabricated as 18 cm gas chromatography (GC) monolithic capillary columns to study their separation performance of nitroalkane mixture and the subsequent physicochemical study of adsorption using the inverse gas chromatography (IGC) technique. A strong preconcentration effect was indicated by a specific retention volume adsorption/desorption ratio equal to 3 for nitromethane on the neat-DVB monolith host-guest interaction, and a 14% higher ratio was observed using the 3-ZMOF@DVB monolithic composite despite the low percentage of 0.7 wt.% of sod-ZMOF added. Furthermore, Incorporating ZMOF resulted in a higher percentage of micropores, increasing the degree of freedom more than bringing stronger adsorption and entropic-driven interaction more than enthalpic. The specific free energy of adsorption (ΔGS) values increased for polar probes and nitroalkanes, denoting that adding ZMOFs earned the DVB monolithic matrix a more specific character. Afterward, Lewis acid-base properties were calculated, estimating the electron acceptor (KA) and electron donor (KB) constants. The neat-DVB was found to have a Lewis basic character with KB/KA = 7.71, and the 3-ZMOF@DVB had a less Lewis basic character with KB/KA = 3.82. An increased electron-accepting nature can be directly related to incorporating sod-ZMOF into the DVB monolithic matrix. This work considers the initial step in presenting a portable explosives detector or preconcentrating explosive markers trace prior to more sophisticated analysis. Additionally, the IGC technique allows for understanding the factors that led to the superior adsorption of nitroalkanes for the developed materials.

Catalytic Oxidation of Benzoins by Hydrogen Peroxide on Nanosized HKUST-1: Influence of Substituents on the Reaction Rates and DFT Modeling of the Reaction Path

In this research, the oxidation of a series of benzoins, R-C(=O)-CH(OH)-R, where R = phenyl, 4-methoxyphenyl, 4-bromophenyl, and 2-naphthyl, by hydrogen peroxide in the presence of nanostructured HKUST-1 (suspension in acetonitrile/water mixture) was studied. The respective benzoic acids were the only products of the reactions. The initial average reaction rates were experimentally determined at different concentrations of benzoin, H₂O₂ and an effective concentration of HKUST-1. The sorption of the isotherms of benzoin, dimethoxybenzoin and benzoic acid on HKUST-1, as well as their sorption kinetic curves, were measured. The increase in H₂O₂ concentration expectedly led to an acceleration of the reaction. The dependencies of the benzoin oxidation rates on the concentrations of both benzoin and HKUST-1 passed through the maxima. This finding could be explained by a counterplay between the increasing reaction rate and increasing benzoin sorption on the catalyst with the increase in the concentration. The electronic effect of the substituent in benzoin had a significant influence on the reaction rate, while no relation between the size of the substrate molecule and the rate of its oxidation was found. It was confirmed by DFT modeling that the reaction could pass through the Baeyer-Villiger mechanism, involving an attack by the HOO^- anion on the C atom of the activated C=O group.

Evaluation of HKUST-1 as Volatile Organic Compound Adsorbents for Respiratory Filters

Cyclohexane is a representative of volatile organic compounds (VOCs). VOCs can cause serious health problems in case of continuous exposure; therefore, it is essential to develop efficient personal protective equipment. Historically, activated carbons are used as VOC adsorbents. However, the emergence of promising novel adsorbents, such as metal-organic frameworks, has pushed the research to study their behavior under the same conditions. In this work, the use of the well-known HKUST-1 MOF of different particle sizes (20 μm, 300-600 μm, and 1-1.18 mm) for the adsorption of low-grade (5000 ppm) cyclohexane combined with different water concentrations (dry, 27 and 80% RH) in a fixed bed is proposed. The results were compared under the same conditions for a typically used activated carbon, PICACTIF TA 60. HKUST-1 has higher affinity to cyclohexane than PICACTIF for the whole pressure range studied, especially at low partial pressures. It begins to adsorb much earlier (0.0025 kPa) than the activated carbon (0.01 kPa). However, a different adsorption behavior is evidenced for both materials in the presence of water vapor since HKUST-1 is very hydrophilic in the zone near to the copper open metal sites, whereas PICACTIF is hydrophobic. After three consecutive cycles, good stability results were obtained for the MOF, comparable to activated carbon, even in the presence of water. As the main finding, although the unstability of HKUST-1 is well established under high humid conditions, the kinetic of degradation has not been established so far. Here, it is shown that the time usage of HKUST-1 as the adsorbent for respiratory mask (single pass) is not affected by the degradation of the structure, which may occur on a longer time scale. Finally, shaping by tableting provides good results since it is possible to increase the MOF density by around 69% with minor loss of adsorption capacity. The best fraction is 300-600 μm, reaching cyclohexane breakthrough times around 85 min/cm³ at 80% RH, comparable with PICACTIF-activated carbon and promising for practical applications.

Emerging porous materials in confined spaces: from chromatographic applications to flow chemistry

Porous materials confined within capillary columns/microfluidic devices are discussed, and progress in chromatographic and membrane separations and catalysis is reviewed.

Selective Adsorption and Separation of Xylene Isomers and Benzene/Cyclohexane with Microporous Organic Polymers POP-1

The separation of chemical substances with analogous chemical structures and physical properties remains a great challenge. In this work, triptycene-like microporous organic polymers (MOPs), POP-1, was synthesized via choosing 1,4-dimethoxybenzene (DMB) and triptycene as external cross-linkers and building blocks, respectively, and POP-1 was employed to separate xylene isomers and benzene (Bz)/cyclohexane (Cy). Results show that POP-1 has a higher uptake for m-xylene (0.29 g/g) and Bz (1.02 g/g); more intriguingly, their complete separation can be realized within 0.6 min using a column packed with POP-1. The interaction between POP-1 networks and adsorbates was also investigated using theoretical (density functional theory together with noncovalent interaction analysis) and experimental (inverse gas chromatography) approaches. Especially, both results present a good agreement, that is, weak interactions such as CH/π interactions play a dominant role in defining the separation performance of POP-1 for xylene isomers and Bz/Cy mixtures. Our findings suggest that MOPs may open up a new route for separating the chemicals that are similar in structure and size.

Liquid-phase epitaxial growth of a homochiral MOF thin film on poly(l-DOPA) functionalized substrate for improved enantiomer separation

By introducing self-polymerized chiral poly(l-DOPA) with excellent adhesion as the substrate, gas chromatography results showed that the chiral poly(l-DOPA) substrate for MOF growth can enhance the enantiomer separation of the probe molecules methyl lactate and 1-phenylethanol.

Effect of temperature on the surface free energy and acid–base properties of Gabapentin and Pregabalin drugs − a comparative study

Temperature dependent surface energy variations observed in Gabapentin and Pregabalin drugs.