Silver nanoparticles linked by a Pt-containing organometallic dithiol bridge: study of local structure and interface by XAFS and SR-XPS

Silver nanoparticles decorated ZnO-CuO core-shell nanowire arrays with low water adhesion and high antibacterial activity

Nanostructured surfaces based on silver nanoparticles decorated ZnO-CuO core-shell nanowire arrays, which can assure protection against various environmental factors such as water and bacteria were developed by combining dry preparation techniques namely thermal oxidation in air, radio frequency (RF) magnetron sputtering and thermal vacuum evaporation. Thus, high-aspect-ratio ZnO nanowire arrays were grown directly on zinc foils by thermal oxidation in air. Further ZnO nanowires were coated with a CuO layer by RF magnetron sputtering, the obtained ZnO-CuO core-shell nanowires being decorated with Ag nanoparticles by thermal vacuum evaporation. The prepared samples were comprehensively assessed from morphological, compositional, structural, optical, surface chemistry, wetting and antibacterial activity point of view. The wettability studies show that native Zn foil and ZnO nanowire arrays grown on it are featured by a high water droplet adhesion while ZnO-CuO core-shell nanowire arrays (before and after decoration with Ag nanoparticles) reveal a low water droplet adhesion. The antibacterial tests carried on Escherichia coli (a Gram-negative bacterium) and Staphylococcus aureus (a Gram-positive bacterium) emphasize that the nanostructured surfaces based on nanowire arrays present excellent antibacterial activity against both type of bacteria. This study proves that functional surfaces obtained by relatively simple and highly reproducible preparation techniques that can be easily scaled to large area are very attractive in the field of water repellent coatings with enhanced antibacterial function.

Catalytically active silver nanoparticles stabilized on a thiol-functionalized metal-organic framework for an efficient hydrogen evolution reaction

A post-synthetic technique, Solvent Assisted Ligand Incorporation (SALI), was used for thiol functionalization in the zirconium-based metal-organic framework NU-1000. This thiol-functionalized MOF was employed as a support for the growth of silver nanoparticles (Ag NPs) through coordination of a Ag(I) complex with a node-anchored thiol-ligand, followed by the reduction of Ag(I) to Ag(0). X-ray photoelectron spectroscopy revealed that the ratio of Ag(0) to Ag(I) proportionally increased with the loading of silver ions. The HER activity increased with the enhancement of Ag(0) in the system and the best efficiency was observed for the composite with ∼95% Ag(0). This composite displayed an overpotential of 165 mV in an acidic medium at 10 mA cm^-2 and a Tafel slope of 53 mA dec^-1. The loading of silver beyond the optimum value led to the aggregation of the particles which affected the overpotential substantially. The catalyst demonstrated appreciable static stability for 24 h, which promotes the use of the material as an HER catalyst. Therefore, these results emphasized that Ag NPs embedded onto a thiol-functionalized MOF is a propitious material for developing a clean and renewable energy source.

Silver Nanoparticle-Based Sensor for the Selective Detection of Nickel Ions

Silver nanoparticles (AgNPs) can be used as a surface plasmon resonance (SPR) colorimetric sensor; the correlation between the SPR phenomenon and the aggregation state of nanoparticle allows the real-time detection of a target molecule. Surface functionalization of NPs with proper molecular baits is often performed to establish the selectivity of the sensor. This work reports on the synthesis of AgNPs under reducing conditions and on the functionalization thereof with mercaptoundecanoic acid (11-MUA). UV-VIS Spectroscopy confirmed the formation of AgNPs, eliciting a surface plasmon absorption band (SPAB) at 393 nm that shifted to 417 nm upon surface coating. Dynamic light scattering was used to investigate the surface coatings; moreover, pelleted AgNPs@11MUA nanoparticles were characterized by scanning electron microscopy (SEM), energy dispersive X-ray analyzers (EDX), and infrared spectroscopy to corroborate the presence of 11MUA on the surface. Most interestingly, the resulting AgNPs@11MUA selectively detected micromolar levels of Ni²⁺, also in the presence of other cations such as Mn²⁺, Co²⁺, Cd²⁺, Cu²⁺, Zn²⁺, Fe²⁺, Hg²⁺, Pb²⁺, and Cr³⁺.

Metal-Modified Montmorillonite as Plasmonic Microstructure for Direct Protein Detection

Thanks to its negative surface charge and high swelling behavior, montmorillonite (MMT) has been widely used to design hybrid materials for applications in metal ion adsorption, drug delivery, or antibacterial substrates. The changes in photophysical and photochemical properties observed when fluorophores interact with MMT make these hybrid materials attractive for designing novel optical sensors. Sensor technology is making huge strides forward, achieving high sensitivity and selectivity, but the fabrication of the sensing platform is often time-consuming and requires expensive chemicals and facilities. Here, we synthesized metal-modified MMT particles suitable for the bio-sensing of self-fluorescent biomolecules. The fluorescent enhancement achieved by combining clay minerals and plasmonic effect was exploited to improve the sensitivity of the fluorescence-based detection mechanism. As proof of concept, we showed that the signal of fluorescein isothiocyanate can be harvested by a factor of 60 using silver-modified MMT, while bovine serum albumin was successfully detected at 1.9 µg/mL. Furthermore, we demonstrated the versatility of the proposed hybrid materials by exploiting their plasmonic properties to develop liquid label-free detection systems. Our results on the signal enhancement achieved using metal-modified MMT will allow the development of highly sensitive, easily fabricated, and cost-efficient fluorescent- and plasmonic-based detection methods for biomolecules.

Functionalization of eggshell membranes with CuO-ZnO based p-n junctions for visible light induced antibacterial activity against Escherichia coli

Biopolymers provide versatile platforms for designing naturally-derived wound care dressings through eco-friendly pathways. Eggshell membrane (ESM), a widely available, biocompatible biopolymer based structure features a unique 3D porous interwoven fibrous protein network. The ESM was functionalized with inorganic compounds (Ag, ZnO, CuO used either separately or combined) using a straightforward deposition technique namely radio frequency magnetron sputtering. The functionalized ESMs were characterized from morphological, structural, compositional, surface chemistry, optical, cytotoxicity and antibacterial point of view. It was emphasized that functionalization with a combination of metal oxides and exposure to visible light results in a highly efficient antibacterial activity against Escherichia coli when compared to the activity of individual metal oxide components. It is assumed that this is possible due to the fact that an axial p-n junction is created by joining the two metal oxides. This structure separates into components the charge carrier pairs promoted by visible light irradiation that further can influence the generation of reactive oxygen species which ultimately are responsible for the bactericide effect. This study proves that, by employing inexpensive and environmentally friendly materials (ESM and metal oxides) and fabrication techniques (radio frequency magnetron sputtering), affordable antibacterial materials can be developed for potential applications in chronic wound healing device area.

Biosynthesized silver nanorings as a highly efficient and selective electrocatalysts for CO2 reduction

Inspiration from nature has driven the development and applications of greener inorganic nanomaterials prepared using biotemplates in the field of nanoscience. In this study, we report the superiority of using a biosynthesized silver nanoring material for CO formation in CO₂ saturated KHCO₃. Compared to bulk silver and free silver nanoparticles prepared by pure chemical reduction, this silver nanoring (assembled on tobacco mosaic virus coat protein) exhibits significantly enhanced activity and selectivity for the conversion of CO₂ to CO. The highest CO faradaic efficiency reaches 95.0% at an overpotential of 910 mV. Additionally, the CO partial current density is 2.7-fold higher than that of the free silver nanoparticles. We believe that the improved catalytic performance is related to the structuring ligand effect of the protein. The numerous functional groups on the protein may tune the reaction activity by influencing the binding energies of the intermediate species from CO₂ reduction or hydrogen evolution.

Wire like diplatinum, triplatinum, and tetraplatinum complexes featuring X[PtCCCCCCCC]mPtX segments; iterative syntheses and functionalization for measurements of single molecule properties

The title complexes are accessed from platinum chloride and Z(CC)₂SiMe₃ (Z = Me₃Sn, H) building blocks via oxidative homocouplings and cross couplings.

The synthesis of thiol-stabilized silver nanoparticles and their application towards the nanomolar-level colorimetric recognition of glutathione

The synthesis and characterization of 5-methyl-1,3,4-thiadiazole-2-thiol fabricated silver nanoparticles and their application to detect glutathione.

Probing Evolution of Local Strain at MoS2-Metal Boundaries by Surface-Enhanced Raman Scattering

Strain usually exists in two-dimensional (2D) materials and devices, and its presence drastically modulates their properties. When 2D materials interface with noble metals, local strain and surface plasmon can couple at the metal-2D material boundaries, delivering a lot of intriguing phenomena. Current studies are mostly focused on the explanations of these strain-related phenomena based on a static point of view. Although strain can typically be relaxed in many environments, the time evolution of strain at metal-2D material interfaces remains largely unknown. In this work, we investigate the evolution of local strain at Ag-MoS₂ boundaries by surface-enhanced Raman scattering. With the split of MoS₂ Raman peaks as an indicator of local strain, it is found that the originally localized strain at Ag-MoS₂ boundaries evolves and relaxes with time into a delocalized strain in MoS₂ plane. The time to start the strain relaxation depends on the number of layers of MoS₂ flakes, suggesting that the relaxation may result from the mechanical instability of the interface between the topmost MoS₂ layer and the underlying materials. The relaxation occurs in a certain period of time, i.e., ∼70 days for 1L and ∼30 days for 3L. Accompanying the strain relaxation, surface sulfurization of Ag also occurs, a process that reduces the strength of locally enhanced electric field. Our results not only provide a deep understanding of strain evolution at metal-MoS₂ interfaces but also shed light on the optimization of MoS₂-based device fabrications.

Redox-Responsive Polymer Template as an Advanced Multifunctional Catalyst Support for Silver Nanoparticles

Hybridization of metal nanoparticles (NPs) with redox-switchable polymer supports not only mitigates their aggregation, but also introduces interfacial electron pathways desirable for catalysis and numerous other applications. The large surface area and surface accessible atoms for noble metal nanoparticles (e.g., Ag, Au, Pt) offer promising opportunities to address challenges in catalysis and environmental remediation. Herein, AgNPs were supported onto redox-switchable polyaniline that acts as an advanced multifunctional conducting template for enhanced catalytic activity. At the initial stage of reduction of Ag⁺, leucoemeraldine is oxidized in situ to pernigraniline (PG), which acts as interfacial pathway between NPs for electron transport. With the contribution of BH₄^-, PG acts as an electron-acceptor site, which creates interfacial electron-hole pairs, serving as additional active catalytic reduction sites. The use of a redox-responsive composite system as a template enhances catalyst performance through adjustable charge injection across interfacial sites, along with catalyst reusability for the reduction of 4-nitrophenol (4-NPh). Strikingly, from X-ray photoelectron spectroscopy results it was observed that in situ reduction of Ag⁺ onto the conductive polymer alters the electronic character of the catalyst. The unique multielectronic effects of such Ag-supported NPs enrich the scope of such catalytic systems via a tunable interface, diversified catalytic activity, fast kinetics, minimization of AgNPs aggregation, and maintenance of high stability under multiple reaction cycles.

Sputtering-Enabled Intracellular X-ray Photoelectron Spectroscopy: A Versatile Method To Analyze the Biological Fate of Metal Nanoparticles

The investigation of the toxicological profile and biomedical potential of nanoparticles (NPs) requires a deep understanding of their intracellular fate. Various techniques are usually employed to characterize NPs upon cellular internalization, including high-resolution optical and electron microscopies. Here, we show a versatile method, named sputtering-enabled intracellular X-ray photoelectron spectroscopy, proving that it is able to provide valuable information about the behavior of metallic NPs in culture media as well as within cells, directly measuring their internalization, stability/degradation, and oxidation state, without any preparative steps. The technique can also provide nanoscale vertical resolution along with semiquantitative information about the cellular internalization of the metallic species. The proposed approach is easy-to-use and can become a standard technique in nanotoxicology/nanomedicine and in the rational design of metallic NPs. Two model cases were investigated: silver nanoparticles (AgNPs) and platinum nanoparticles (PtNPs) with the same size and coating. We observed that, after 48 h incubation, intracellular AgNPs were almost completely dissolved, forming nanoclusters as well as AgO, AgS, and AgCl complexes. On the other hand, PtNPs were resistant to the harsh endolysosomal environment, and only some surface oxidation was detected after 48 h.

Hydrophobic and Hydrophilic Au and Ag Nanoparticles. Breakthroughs and Perspectives

This review provides a broad look on the recent investigations on the synthesis, characterization and physico-chemical properties of noble metal nanoparticles, mainly gold and silver nanoparticles, stabilized with ligands of different chemical nature. A comprehensive review of the available literature in this field may be far too large and only some selected representative examples will be reported here, together with some recent achievements from our group, that will be discussed in more detail. Many efforts in finding synthetic routes have been performed so far to achieve metal nanoparticles with well-defined size, morphology and stability in different environments, to match the large variety of applications that can be foreseen for these materials. In particular, the synthesis and stabilization of gold and silver nanoparticles together with their properties in different emerging fields of nanomedicine, optics and sensors are reviewed and briefly commented.

Novel and effective synthesis protocol of AgNPs functionalized using L-cysteine as a potential drug carrier

In this study, the protocol of a single-step l-cysteine functionalized silver nanoparticle synthesis was described. Particle size distribution was determined. The crystallinity and chemical properties were investigated using XRD, HR-TEM, and XPS methods. Acute toxicity and irritant properties of obtained nanoparticles were studied using mice and rats as an animal model. The results showed that thanks to the applied protocol, it was possible to synthesize silver nanoparticles with narrow particle size distribution. Moreover, the concentration of final product was extremely high in comparison to other known methods. These nanoparticles showed neither irritant properties nor acute toxicity.

Cu0-Loaded organo-montmorillonite with improved affinity towards hydrogen: an insight into matrix-metal and non-contact hydrogen-metal interactions

Copper-loaded organo-montmorillonite showed improved affinity towards hydrogen under ambient conditions. Clay ion exchange with a propargyl-ended cation followed by thiol-yne coupling with thioglycerol resulted in a porous structure with a 6 fold higher specific surface area, which dramatically decreased after copper incorporation. X-ray diffraction and photoelectron spectrometry, nuclear magnetic resonance (¹H and ¹³C) and CO₂-thermal programmed desorption revealed strong sulfur:Cu⁰ and oxygen:Cu⁰ interactions. This was explained in terms of structure compaction that 'traps' Cu⁰ nanoparticles (CuNPs) and reduces their mobility. Transmission electron microscopy showed predominant 1.0-1.5 nm CuNPs. Hydrogen capture appears to involve predominantly physical interaction, since differential scanning calorimetry measurements gave low desorption heat and almost complete gas release between 20 °C and 75 °C. Possible hydrogen condensation within the compacted structure should hinder gas diffusion inside CuNPs and prevent chemisorption. These results allow safe hydrogen storage with easy gas release to be envisaged even at room temperature under vacuum. The reversible capture of hydrogen can be even more attractive when using natural inorganic supports and commercial plant-derived dendrimers judiciously functionalized, even at the expense of porosity.

One-step synthesis of chiral carbon quantum dots and their enantioselective recognition

Chiral carbon quantum dots (l-carbon quantum dots, l-CQDs; and d-carbon quantum dots, d-CQDs) were synthesized through the facile hydrothermal treatment of carbonated citric acid and l-cysteine (or d-cysteine).

Local structure of semicrystalline P3HT films probed by nanofocused coherent X-rays

Spatially resolved x-ray study of semicrystalline P3HT films reveals nanoscale inhomogeneity of the conjugated network, as well as structural variations induced by Au nanoparticles.