Enhanced photocatalytic activity of Co doped ZnO nanodisks and nanorods prepared by a facile wet chemical method

Vibrational, optical, and photocatalytic properties of ZnO/layered carbon nanocomposite synthesized by ball milling

ZnO/layered carbon nanocomposites with varied sizes of ZnO nanoparticles (NPs) were synthesized by mechanical milling of mixture of ZnO NPs and carbon NPs. The NP size of ZnO was controlled with average particle sizes about 19.33, 21.87, 24.21, and 27.89 nm by varying the concentrations of carbon NPs viz 0, 2, 5, and 10 weight percent, respectively, in the mixture. Presence of carbon with ZnO in the form of composite also resulted in the enhanced shift of the band gap of ZnO due to the optical transitions in the impurity states or presence of carbon as compared to the ZnO size change alone. Additionally, the enhancement of absorbance in the visible region with an increase in carbon content was observed. Such an increase in absorbance can enhance the photocatalytic activity of ZnO NPs. Raman bands for ZnO NPs also were found to shift faster in the presence of layered carbon. The quenching of visible photoluminescence emission of ZnO NPs with an increase in concentration of carbon NPs in the composite indicated the phenomenon associated with transfer of electrons from ZnO to layered carbon helping the separation of photo-generated electrons and holes in ZnO and can lead to enhancement of the photocatalytic activity of ZnO NPs. In the photocatalytic studies, it was observed that the degradation of methylene blue (MB) dye was significantly enhanced by the increase of content of layered carbon in the nanocomposite. The sample containing 10% carbon showed the highest adsorption in dark conditions which was up to 60% of the starting strength and this was further enhanced to 88% in the presence of UV radiation. Enhanced adsorption of MB dye and the effective separation of electron-hole pairs due to charge transfer were believed to be the main causes behind such kind of improvement in the photocatalytic effects.

Advances in Defect Engineering of Metal Oxides for Photocatalytic CO2 Reduction

Photocatalytic CO2 reduction technology, capable of converting low-density solar energy into high-density chemical energy, stands as a promising approach to alleviate the energy crisis and achieve carbon neutrality. Semiconductor metal oxides, characterized by their abundant reserves, good stability, and easily tunable structures, have found extensive applications in the field of photocatalysis. However, the wide bandgap inherent in metal oxides contributes to their poor efficiency in photocatalytic CO2 reduction. Defect engineering presents an effective strategy to address these challenges. This paper reviews the research progress in defect engineering to enhance the photocatalytic CO2 reduction performance of metal oxides, summarizing defect classifications, preparation methods, and characterization techniques. The focus is on defect engineering, represented by vacancies and doping, for improving the performance of metal oxide photocatalysts. This includes advancements in expanding the photoresponse range, enhancing photogenerated charge separation, and promoting CO2 molecule activation. Finally, the paper provides a summary of the current issues and challenges faced by defect engineering, along with a prospective outlook on the future development of photocatalytic CO2 reduction technology.

Effect of Co Doping on the Physical Properties and Organic Pollutant Photodegradation Efficiency of ZnO Nanoparticles for Environmental Applications

This paper presents a comprehensive investigation of the synthesis and characterization of Zn1-xCoxO (0 ≤ x ≤ 0.05) nanopowders using a chemical co-precipitation approach. The structural, morphological, and vibrational properties of the resulting ZnO nanostructures were assessed through X-ray diffraction, scanning electronic microscopy, and Raman spectroscopy to examine the influence of cobalt doping. Remarkably, a notable congruence between the experimental results and the density functional theory (DFT) calculations for the Co-doped ZnO system was achieved. Structural analysis revealed well-crystallized hexagonal wurtzite structures across all samples. The SEM images demonstrated the formation of spherical nanoparticles in all the samples. The vibrational properties confirmed the formation of a hexagonal wurtzite structure, with an additional Raman peak corresponding to the F2g vibrational mode characteristic of the secondary phase of ZnCo2O4 observed at a 5% cobalt doping concentration. Furthermore, a theoretical examination of cobalt doping's impact on the elastic properties of ZnO demonstrated enhanced mechanical behavior, which improves stability, recyclability, and photocatalytic activity. The photocatalytic study of the synthesized compositions for methylene blue (MB) dye degradation over 100 min of UV light irradiation demonstrated that Co doping significantly improves photocatalytic degradation. The material's prolonged lifetime, reduced rate of photogenerated charge carrier recombination, and increased surface area were identified as pivotal factors accelerating the degradation process. Notably, the photocatalyst with a Zn0.99Co0.01O composition exhibited exceptional efficiency compared to that reported in the literature. It demonstrated high removal activity, achieving an efficiency of about 97% in a shorter degradation time. This study underscores the structural and photocatalytic advancements in the ZnO system, particularly at lower cobalt doping concentrations (1%). The developed photocatalyst exhibits promise for environmental applications owing to its superior photocatalytic performance.

Experimental and ab initio studies of Co-doped ZnO nanophotocatalyst thin films for dye mineralization

Pristine ZnO and Co-doped ZnO photocatalyst thin films were fabricated on a ceramic substrate by spray pyrolysis. The optical, morphological and structural properties of the fabricated nanophotocatalyst thin films were analyzed using X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) spectroscopy and Fourier transform infrared (FTIR) spectroscopy. Operational parameters, including dye concentration, oxidant concentration, irradiation time and pH for dye degradation, were optimized by response surface methodology (RSM). The maximum degradation obtained was 93% under ideal conditions, such as pH 7, 3 h of direct sunlight irradiation, 30 mM concentration of oxidant and 10 ppm concentration of dye (MB). The evaluation of the extent of degradation was done using the UV/visible spectrophotometry technique. The reusability of the fabricated thin film was examined under optimized conditions. Density functional theory (DFT) with the B3LYP/LanL2DZ method was used for the theoretical modelling of the fabricated nanomaterials. The optimized structure, theoretical band gaps, IR spectra and Raman spectra of the fabricated pristine ZnO and Co:ZnO nanophotocatalysts were determined.

Emerging aspects of metal ions-doped zinc oxide photocatalysts in degradation of organic dyes and pharmaceutical pollutants - A review

In recent periods, a broad assortment of continual organic contaminants has been released into our natural water resources. Indeed, it is exceedingly poisonous and perilous to living things; thus, the elimination of these organic pollutants before release into the water bodies is vital. A variety of techniques have been utilized to remove these organic pollutants with advanced oxidation photocatalytic methods with zinc oxide (ZnO) nanoparticles being commonly used as a capable catalyst for contaminated water treatment. Nevertheless, its broad energy gap, which can be only stimulated under an ultraviolet (UV) light source, and high recombination pairs of electrons and holes limit their photocatalytic behaviors. However, numerous methods have been suggested to decrease its energy gap for visible regions. Including, the doping ZnO with metal ions (dopant) can be considered as an effectual route not only the reason for a movement of the absorption edges toward the higher (visible light) region but also to lower the electron-hole pair (e--h+) recombination. This review concentrated on the impact of dissimilar types of metal ions (dopants) on the advancement in the degradation performance of ZnO. So, this work demonstrates a vital review of contemporary attainments in the alteration of ZnO nanoparticles for organic pollutants eliminations. Besides, the effect of doping ions including transition metals, rare earth metals, and metal ions (substitutional and interstitial) concerning numerous types of altered ZnO are summarized. The photodegradation mechanisms for pristine and metal-modified ZnO nanoparticles are also conferred.

Improved cotton fabrics properties using zinc oxide-based nanomaterials: A review

Zinc oxide nanoparticles (ZnO NPs) have gained significant attention in the textile industry for their ability to enhance the physicochemical properties of fabrics. In recent years, there has been a growing focus on the development of ZnO-based nanomaterials and their applications for cotton and other fabrics. This review paper provides an overview of the synthesis and diverse applications of ZnO-based nanomaterials for textile fabrics, including protection against UV irradiation, bacteria, fungi, microwave, electromagnetic radiation, water, and fire. Furthermore, the study offers the potential of these materials in energy harvesting applications, such as wearable pressure sensors, piezoelectric nanogenerators, supercapacitors, and human energy harvesting. Additionally, we discuss the potential of ZnO-based nanomaterials for environmental cleaning, including water, oil, and solid cleaning. The current research in this area has focused on various materials used to prepare ZnO-based nanocomposites, such as metals/nonmetals, semiconductors, metal oxides, carbon materials, polymers, MXene, metal-organic frameworks, and layered double hydroxides. The findings of this review highlight the potential of ZnO-based nanomaterials to improve the performance of textile fabrics in a range of applications, and the importance of continued research in this field to further advance the development and use of ZnO-based nanomaterials in the textile industry.

Synthesis of Mixed-Phase TiO2-ZrO2 Nanocomposite for Photocatalytic Wastewater Treatment

The use of TiO₂ nanoparticles for photocatalysis for the degradation of organic dyes under UV light for wastewater treatment has been widely studied. However, the photocatalytic characteristics of TiO₂ nanoparticles are inadequate due to their UV light response and higher band gap. In this work, three nanoparticles were synthesized: (i) TiO₂ nanoparticle was synthesized by a sol-gel process. (ii) ZrO₂ was prepared using a solution combustion process and (iii) mixed-phase TiO₂-ZrO₂ nanoparticles were synthesized by a sol-gel process to remove Eosin Yellow (EY) from aqueous solutions in the wastewater. XRD, FTIR, UV-VIS, TEM, and XPS analysis methods were used to examine the properties of the synthesized products. The XRD investigation supported the tetragonal and monoclinic crystal structures of the TiO₂ and ZrO₂ nanoparticles. TEM studies identified that mixed-phase TiO₂-ZrO₂ nanoparticles have the same tetragonal structure as pure mixed-phase. The degradation of Eosin Yellow (EY) was examined using TiO₂, ZrO₂, and mixed-phase TiO₂-ZrO₂ nanoparticles under visible light. The results confirmed that the mixed-phase TiO₂-ZrO₂nanoparticles show a higher level of photocatalytic activity, and the process is accomplished at a high degradation rate in lesser time and at a lower power intensity.

Increased photocorrosion resistance of ZnO foams via transition metal doping

ZnO is a widely studied photocatalyst, but practical use is hindered by its low resistance to photocorrosion in water, which leads to metal leaching and loss of performance over time. In this work, highly porous and mechanically stable ZnO foams, called MolFoams, were doped by adding 1% or 2% Co, Ni or Cu salts to the starting Zn salt, followed by air insufflation during a sol-gel rection and sintering. The resulting doped foams showed a major increase in stability, with a 60-85% reduction in Zn²⁺ leaching after irradiation, albeit with a reduction in photocatalytic activity. A systematic analysis using XRD, Raman, XPS and XANES allowed for the identification of dopant species in the foams revealing the presence of Co₃O₄, NiO and Cu₂O within the ZnO lattice with doping leading to a reduced band gap and significant increases in the resistance to photocorrosion of ZnO while identifying the cause of the reduction in photocatalytic activity to be shifting of the band edge positions. These results provide a pathway to significantly reduce the photocorrosion of ZnO in water, with further work required to maintain the photocatalytic activity of undoped ZnO.

Synthesis and preparation of acid capped CdSe nanocrystals as successful adsorbent and photocatalyst for the removal of dyes from water and its statistical physics analysis

In this study, mercaptosuccinic acid capped CdSe nanocrystals were successfully synthesized and used as photocatalyst for the effective removal of methylene blue (MB) inaqueous solution under visible light and sunlight irradiations including its analysis with statistical physics theory. Dye adsorption properties of these nanocrystals were investigated via experimental kinetics and equilibrium studies. These experimental data were modeled via the application of statistical physics theory to explain the corresponding adsorption mechanism and to characterize the steric and energetic parameters involved in the dye removal. A maximum adsorption capacity of 27.07 mg g^-1 (80% of dye removal) was observed in 10 min using an initial concentration of 30 mg L^-1. Statistical physics calculations indicated that the adsorption energy was lower than 40 kJ mol^-1. It was also established that the dye adsorption was associated to the electrostatic interactions and hydrogen bonding where dye aggregation and multi-molecular adsorption were expected. Overall, the dye removal was a spontaneous, feasible and exothermic. It was concluded that adsorption properties of CdSe-MSA nanocrystals improved the dye photo-catalytic degradation efficiency under visible light thus achieving up to 80% degradation efficiency in 60 min. The synergic effect of adsorption and photo-catalytic degradation performance was mainly due to the surface area (136.43 m² g^-1), small size (3.7 nm), and structural defects (selenium vacancies S_e, interstitial of cadmium I_Cd) of CdSe nanocrystals, which enhanced both the response of these nanomaterials to visible light and their photo-catalytic activity. In summary, these nanocrystals are promising materials to be used in wastewater treatment under sunlight for the removal of organic compounds like dyes.

Photocatalytic nanohybrid membranes for highly efficient wastewater treatment: A comprehensive review

Wastewater is inevitably generated from human activities as part of the life cycle chain that potentially damages the environment. The integration of photocatalytic reaction and membrane separation for wastewater treatment has gained great attention in recent studies. However, there are still many technical limitations for its application such as toxic metal release, catalyst deactivation, fouling/biofouling, polymer disintegration, and separation performance decline. Different types, combinations, and modifications of photocatalysts material combined with membranes such as semiconductor metal oxides, binary/ternary hybrid metal oxides, elemental doped semiconductors, and metal-organic frameworks (MOFs) for improving the performance and compatibility are presented and discussed. The strategies of incorporating photocatalysts into membrane matrix for pursuing the most stable membrane integrity, high photocatalytic efficiency, and excellent perm-selectivity performance in the very recent studies were discussed. This review also outlines the performance enhancement of photocatalytic membranes (PMs) in wastewater treatment and its potential for water reclamation. Photocatalysts enhanced membrane separation by inducing anti-fouling and self-cleaning properties as well as antibacterial activity. Based on the reviewed study, PMs are possible to achieve complete removal of emerging contaminants and ∼99% reduction of bacterial colony that leading on the zero liquid discharge (ZLD). However, the intensive exposure of photo-induced radicals potentially damages the polymeric membrane. Therefore, future studies should be focused on fabricating chemically stable host-membrane material. Moreover, the light source and the membrane module design for the practical application by considering the hydrodynamic and cost-efficiency should be a concern for technology diffusion to the industrial-scale application.

CO2 bubble-assisted in-situ construction of mesoporous Co-doped Cu2(OH)2CO3 nanosheets as advanced electrodes towards fast and highly efficient electrochemical reduction of nitrate to N2 in wastewater

The development of high-efficient and cost-effective electrocatalysts is crucial to remove nitrate pollutant in wastewater. Herein, we design and prepare mesoporous Co-doped Cu₂(OH)₂CO₃ malachite nanosheets as an electrocatalyst toward highly efficient nitrate reduction using a facile CO₂ bubble-assisted coprecipitation synthesis. The electrocatalytic performance is subject to the Co/Cu ratio of this malachite. Remarkably, compared with the pristine monometal Cu or Co-based electrocatalyst, the optimal electrocatalyst, 0.3Co@Cu₂(OH)₂CO₃, displays fast and highly efficient removal capacity of nitrate with an impressive high total nitrogen (TN) removal of 8628.99 mg N g^-1_CoCu (398.79 mg N g_cat^-1 h^-1), N₂ selectivity of 97.11% as well as negligible nitrite product at 100 mg L^-1 NO₃^--N and 2000 mg L^-1 Cl^- neutral electrolyte. Above all, high total nitrogen removal efficiency (81.92%) and chemical oxygen demand (73.74%) in actual wastewater. Its excellent electrocatalytic performance is achieved by regulating the electronic structure and the adsorption/desorption of the intermediate. This study discovers a new type of electrode materials for nitrate removal in wastewater.

The Auto-Combustion Method Synthesized Eu2O3-ZnO Nanostructured Composites for Electronic and Photocatalytic Applications

An efficient and environmentally friendly combustion technique was employed to produce ZnO nanopowders with different Eu concentrations (from 0.001 g to 5 g). The structural morphology of the Eu₂O₃-ZnO nanocomposites was examined using XRD, SEM, and infrared spectroscopy (FT-IR). In addition, UV-Vis diffuse reflectance spectroscopy was also used to investigate the effects of europium (Eu) dopant on the optical behaviors and energy bandgaps of nano-complex oxides. The photocatalytic degradation efficiency of phenol and methylene blue was investigated using all the prepared Eu₂O₃-ZnO nanostructured samples. Photocatalytic effectiveness increased when europium (Eu) doping ratios increased. After adding moderate Eu, more hydroxyl radicals were generated over ZnO. The best photocatalyst for phenol degradation was 1 percent Eu₂O₃-ZnO, while it was 0.5 percent Eu₂O₃-ZnO for methylene blue solutions. The obtained Eu₂O₃-doped ZnO nanostructured materials are considered innovative, promising candidates for a wide range of nano-applications, including biomedical and photocatalytic degradation of organic dyes and phenol.

Recent advances in ZnO-based photosensitizers: Synthesis, modification, and applications in photodynamic cancer therapy

Zinc oxide nanoparticles (ZnO NPs) are important semiconductor materials with interesting photo-responsive properties. During the past, ZnO-based NPs have received considerable attention for photodynamic therapy (PDT) due to their biocompatibility and excellent potential of generating tumor-killing reactive oxygen species (ROS) through gentle photodynamic activation. This article provides a comprehensive review of the recent developments and improvements in optical properties of ZnO NPs as photosensitizers for PDT. The optical properties of ZnO-based photosensitizers are significantly dependent on their charge separation, absorption potential, band gap engineering, and surface area, which can be adjusted/tuned by doping, compositing, and morphology control. Here, we first summarize the recent progress in the charge separation capability, absorption potential, band gap engineering, and surface area of nanosized ZnO-based photosensitizers. Then, morphology control that is closely related to their synthesis method is discussed. Following on, the state-of-art for the ZnO-based NPs in the treatment of hypoxic tumors is comprehensively reviewed. Finally, we provide some outlooks on common targeted therapy methods for more effective tumor killing, including the attachment of small molecules, antibodies, ligands molecules, and receptors to NPs which further improve their selective distribution and targeting, hence improving the therapeutic effectiveness. The current review may provide useful guidance for the researchers who are interested in this promising dynamic cancer treatment technology.

A dual-functional flexible sensor based on defects-free Co-doped ZnO nanorods decorated with CoO clusters towards pH and glucose monitoring of fruit juices and human fluids

Herein, ZnO nanorods were doped with Co and decorated with CoO clusters through an in situ technique to create a CoO/Co-doped ZnO (CO/CZO) heterostructure at low temperatures (150 °C) on a flexible PET substrate. In the CO/CZO heterostructure, the Co dopant has a low energy barrier to substitute Zn atoms and adsorb over oxygen atoms and their vacancies. Therefore, it decreased the charge density (ND = 2.64 × 1019 cm-3) on non-active sites of ZnO and lowered the charge transfer resistance (317 Ω) at Co-doped-ZnO/electrolyte interface by suppressing the native defects and reducing the Schottky barrier height (- 0.35 eV), respectively. Furthermore, CoO clusters induced a p-n heterostructure with Co-doped ZnO, prevented corrosion, increased the active sites for analyte absorption, and increased the ultimate tensile strength (4.85 N m-2). These characteristics enabled the CO/CZO heterostructure to work as a highly sensitive, chemically stable, and flexible pH and glucose oxidation electrode. Therefore, CO/CZO heterostructure was explored for pH monitoring in human fluids and fruit juices, demonstrating a near-Nernst-limit pH sensitivity (52 mV/pH) and fast response time (19 s) in each human fluid and fruit juice. Also, it demonstrated high sensitivity (4656 µM mM-1 cm-2), low limit of detection (0.15 µM), a broad linear range (0.04 mM to 8.85 mM) and good anti-interference capacity towards glucose-sensing. Moreover, it demonstrated excellent flexibility performances, retained 53% and 69% sensitivity of the initial value for pH and glucose sensors, respectively, after 500 bending, stretching, and warping cycles.

Global popularization of CuNiO2 and their rGO nanocomposite loveabled to the photocatalytic properties of methylene blue

New advancements of photocatalytic activity with higher efficiency, low price are most important, which is challenging in industrialized and many fields. We have introduced CuNiO₂ and CuNiO₂/rGO nanocomposite was generally prepared by the hydrothermal treatment and tested to the photocatalytic studies. Photocatalytic measurements of CuNiO₂ with different weight percentages CuNiO₂/rGO (25/75), (50/50), and (75/25) are achieved to the efficiency under visible light, in this case, CuNiO₂/rGO (50/50) composite have the highest performance is scrutinized. This was obeyed for a synergistic effect between CuNiO₂ nanoparticles and rGO composites. Furthermore, the CuNiO₂, CuNiO₂/rGO (25/75), (50/50), and (75/25) nanocomposite were tested by several analyses like XRD, FT-IR, DRS UV Visible spectroscopy, Raman spectroscopy, and FESEM & HRTEM investigations. In this regard all measurements are very clear and satisfied; therefore we are encouraged for future developing environmental applications.

Facet-selective morphology-controlled remote epitaxy of ZnO microcrystals via wet chemical synthesis

We report on morphology-controlled remote epitaxy via hydrothermal growth of ZnO micro- and nanostructure crystals on graphene-coated GaN substrate. The morphology control is achieved to grow diverse morphologies of ZnO from nanowire to microdisk by changing additives of wet chemical solution at a fixed nutrient concentration. Although the growth of ZnO is carried out on poly-domain graphene-coated GaN substrate, the direction of hexagonal sidewall facet of ZnO is homogeneous over the whole ZnO-grown area on graphene/GaN because of strong remote epitaxial relation between ZnO and GaN across graphene. Atomic-resolution transmission electron microscopy corroborates the remote epitaxial relation. The non-covalent interface is applied to mechanically lift off the overlayer of ZnO crystals via a thermal release tape. The mechanism of facet-selective morphology control of ZnO is discussed in terms of electrostatic interaction between nutrient solution and facet surface passivated with functional groups derived from the chemical additives.

One-pot, ligand-free, room-temperature synthesis of Au/Pd/ZnO nanoclusters with ultra-low noble metal loading and synergistically improved photocatalytic performances

Au/Pd/ZnO nanoclusters with ultra-low noble metal loadings were prepared by a one-step and ligand-free method at room temperature. HRTEM, ICP-MS, XPS, and elemental mapping analysis confirmed that the obtained Au/Pd/ZnO nanoclusters were composed of ZnO nanoclusters decorated with well-dispersed AuPd nanoparticles. Au/Pd/ZnO nanoclusters exhibited higher photocatalytic activity compared with those of pristine ZnO, Au/ZnO and Pd/ZnO. Moreover, the high catalytic activity of Au/Pd/ZnO nanoclusters could be maintained even after 5 cycles of photocatalytic reaction. A mechanism for the enhanced photocatalytic performance was also suggested, which was in light of the synergistic effects of the SPR effect from Au and the improved photogenerated charge carrier separation from Pd.

Zn(II)-tetracarboxy-phthalocyanine-Sensitized TiO2 Thin Films as Antimicrobial Agents under Visible Irradiation: a Combined DFT and Experimental Study

In this article, we studied the antimicrobial activity of TiO2 sensitized by the Zn(II)-tetracarboxy-phthalocyanine (TcPcZn) complex using TiO2-Degussa P25 as a semiconductor source. The TiO2 thin films were deposited by the doctor blade method and were sensitized by the chemisorption process. The obtained compounds were characterized using Fourier transform infrared spectroscopy, UV-vis spectrophotometry, Raman spectroscopy, diffuse reflectance spectroscopy, and scanning electron microscopy. Furthermore, we studied the stability of the adsorbed sensitizer on the semiconductor surface by using the density functional theory (DFT). Additionally, we determined the antimicrobial activity of TcPcZn-TiO2 against methicillin-resistant Staphylococcus aureus (MRSA). The Raman and optical results confirmed the sensitizing process. The TcPcZn-TiO2 thin films showed radiation absorption in the visible range of the electromagnetic spectrum (600-750 nm), and the dye anchored on the TiO2 surface had a band gap of 1.58 eV. The DFT study showed that TcPcZn supported on any phase of Degussa P25 is stable, making them suitable to act as catalysts in the proposed reactions. Finally, the TcPcZn-TiO2 thin films reached 76.5% of inhibition activity against MRSA.

Influence of the Physical Properties on the Antibacterial and Photocatalytic Behavior of Ag-Doped Indium Sulfide Film Deposited by Spray Pyrolysis

Spray pyrolysis was used to deposit indium sulfide (In2S3) films, with or without silver doping. The films are polycrystalline, and the inclusion of Ag in the In2S3 structure leads to the formation of a solid solution, with the crystallite size of the order of tens of nanometers. In2S3 films exhibit a semiconductive behavior, and the incorporation of Ag leads to an increase of the charge carrier concentration, enhancing the electrical conductivity of the films. The small polaron hopping mechanism, deduced by the fittings according to the double Jonscher variation, explains the evolution of the direct current (dc) conductivity at high temperature of the Ag-doped indium sulfide. From impedance spectroscopy, it was found that the doped film presents dielectric relaxation, and Nyquist diagrams indicate the importance of the grain and the grain boundaries’ contributions to the transport phenomena. The physical characteristics of the films have an influence on the photocatalytic performance, achieving photodegradation efficiency above 80% (85.5% in the case of Ag doping), and on the antibacterial activity. The obtained results indicate that indium sulfide films are good candidates for environmental and biological applications, confirming a multifunctional nature.

Co2+-Doped BiOBrxCl1-x hierarchical microspheres display enhanced visible-light photocatalytic performance in the degradation of rhodamine B and antibiotics and the inactivation of E. coli

In this article, we have synthesized Co²⁺-doped BiOBr_xCl_1-x hierarchical nanostructured microspheres, featuring different degrees of Co²⁺ doping, displaying excellent photocatalytic performance. X-ray diffraction and Raman spectroscopy indicated that the Co²⁺ ions were successfully doped into the BiOBr_xCl_1-x nanocrystals. The photodegradation rate of rhodamine B mediated by a doped BiOBr_xCl_1-x was 150 % greater than that of the non-doped BiOBr. We ascribe the improved photocatalytic capability of the Co²⁺-doped BiOBr_xCl_1-x to a combination of its superior degree of light absorption, more efficient carrier separation, and faster interfacial charge migration. The major active species involved in the photodegradation of RhB also has been investigated. Moreover, the doped BiOBr_xCl_1-x possessed excellent cellular biocompatibility and displayed remarkable performance in the photocatalytic bacterial inactivation.

Sisal-like Sn2+ doped ZnO hierarchical structures: synthesis, growth mechanism, and their application in photocatalysis

Sisal-like Sn doped ZnO hierarchical structures were prepared by the hydrothermal method without employing templates or matrices. The architectures show enhanced light absorption, high photocatalytic properties, good stability and reusability.

Morphological and Optical Properties of Cobalt Ion-Modified ZnO Nanowires

In this study, we prepared cobalt (Co) ion-modified ZnO nanowires using hydrothermal synthesis with zinc acetate dehydrate and Co (II) acetate hydrate precursors in ethanol solutions. Their morphological and optical properties were investigated with varying Co precursor concentration. The morphological changes of the ZnO nanowires depended positively on the concentration of the Co precursor. The ZnO nanowires showed modified crystal orientations and nanostructure shapes depending on the Co concentration in the solutions. Variations in the optical properties of the Co ion-modified ZnO nanowires could be explained by the interaction of the Co ions with the band electrons, oxygen vacancies, and zinc interstitials. The overall growth and characteristics of ZnO nanowires synthesized in solutions containing low levels of Co ions were related to Co doping into the ZnO bulks. In solutions containing high levels of Co ions, these were additionally related to the Co oxide cluster.

Comparative Study of ZnO Thin Films Doped with Transition Metals (Cu and Co) for Methylene Blue Photodegradation under Visible Irradiation

We synthesized and characterized both Co-doped ZnO (ZnO:Co) and Cu-doped ZnO (ZnO:Cu) thin films. The catalysts’ synthesis was carried out by the sol–gel method while the doctor blade technique was used for thin film deposition. The physicochemical characterization of the catalysts was carried out by Raman spectroscopy, scanning electron microscopy (SEM), X-ray diffraction, and diffuse reflectance measurements. The photocatalytic activity was studied under visible irradiation in aqueous solution, and kinetic parameters were determined by pseudo-first-order fitting. The Raman spectra results evinced the doping process and suggested the formation of heterojunctions for both dopants. The structural diffraction patterns indicated that the catalysts were polycrystalline and demonstrated the presence of a ZnO wurtzite crystalline phase. The SEM analysis showed that the morphological properties changed significantly, the micro-aggregates disappeared, and agglomeration was reduced after modification of ZnO. The ZnO optical bandgap (3.22 eV) reduced after the doping process, these being ZnO:Co (2.39 eV) and ZnO:Co (3.01 eV). Finally, the kinetic results of methylene blue photodegradation reached 62.6% for ZnO:Co thin films and 42.5% for ZnO:Cu thin films.

In Situ Charge Transfer at the Ag@ZnO Photoelectrochemical Interface toward the High Photocatalytic Performance of H2 Evolution and RhB Degradation

Designing an efficient hybrid structure photocatalyst for photocatalytic decomposition and hydrogen (H₂) evolution has been considered a great choice to develop renewable technologies for clean energy production and environmental remediation. Enhanced charge transfer (CT) based on the interaction between a noble metal and a semiconductor is a crucial factor influencing the movement of photogenerated electron-hole pairs. Herein, we focus on the recent advances related to plasmon-enhanced noble metals and the semiconductor nature to drive the photocatalytic H₂ production and photodegradation of the organic dye rhodamine B (RhB) under UV and visible light irradiation. Specifically, the combination of concerted catalysis and green nanoengineering strategies to design ZnO-based composite photocatalysts and their decoration with metallic Ag have been realized by the radio frequency (RF) sputtering technique at room temperature. This simultaneity enhances the interface coupling between Ag and ZnO and reduces the energy threshold. The creation of charge transfer in the heterojunction and Schottky barrier changes the photoelectronic properties of the as-synthesized Al-doped ZnO (AZO); afterward, these effects promote the migration, transportation, and separation of photoinduced charge carriers and enhance the light-harvesting efficiency. As a result, the as-synthesized AZO-20 hybrid nanostructure exhibits a photocurrent density of 2.5 mA/cm² vs Ag/AgCl, which is improved by almost 12 times compared with that of bare ZnO (0.2 mA/cm²). The hydrogen evolution rates of AZO-20 were ∼38 and ∼24 μmol/h under UV and visible light exposure, which are almost five- and tenfold higher than those of pristine ZnO, respectively. Additionally, the RhB degradation efficacies of the obtained AZO-20 were greater than almost 97 and 82% under UV and visible light illumination, respectively. The achieved apparent rate constant for the photocatalytic RhB decomposition was 0.014 min^-1, indicating that it is 14-fold than that in pristine ZnO (0.001 min^-1). Heterostructure AZO photocatalysts possess excellent practical stability in the water-splitting reaction and photocatalytic RhB decomposition, posing as promising candidates in practical works for pollution and energy challenges.

Cerium-Oxide-Nanoparticle-Decorated Zinc Oxide with Enhanced Photocatalytic Degradation of Methyl Orange

Cerium-oxide-nanoparticle-decorated zinc oxide was successfully prepared using a simple one-pot hydrothermal technique with different weight% Ce doping. It was found that an increase in Ce doping has an effect on the optical energy band-gap tunability. Ce dopant provides electron trapping on Ce/ZnO nanocomposites and also acts as a surface defect generator during hydrothermal processing. Additionally, a bi-metal oxide heterojunction forms, which acts as a charge separator to obstruct charge recombination and to increase the photodegradation performance. It was found that the methyl orange (MO) degradation performance improved with an increase in Ce doping. The decomposition of MO went from 69.42% (pristine ZnO) to 94.06% (7% Ce/ZnO) after 60 min under fluorescent lamp illumination.

Preparation of cobalt crystals with various morphologies and the catalytic performance of platinum-on-cobalt crystal for the selective hydrogenation of nitrobenzene

The Pt/Co-No catalyst exhibited the best catalytic property (yield to aniline-95.8%) due to high Pt dispersion and nano-synergy effect between Pt- and Co-related species.