Catalysts Prepared from Atomically Dispersed Ce(III) on MgO Rival Bulk Ceria for CO Oxidation

Atomically dispersed cerium catalysts on an inert, crystalline MgO powder support were prepared by using both Ce(III) and Ce(IV) precursors. The materials were used as catalysts for CO oxidation in a once-through flow reactor and characterized by atomic-resolution scanning transmission electron microscopy, X-ray absorption near-edge structure spectroscopy, X-ray photoelectron spectroscopy, and temperature-programmed reduction, among other techniques, before and after catalysis. The most active catalysts, formed from the precursor incorporating Ce(III), displayed performance similar to that reported for bulk ceria under comparable conditions. The catalyst provided stable time-on-stream performance for as long as it was kept on-stream, 2 days, increasing slightly in activity as the atomically dispersed cerium ions were transformed into ceria nanodomains represented as CeOx and having increased reducibility on the MgO support. The results suggest how highly dispersed supported ceria catalysts with low cerium loadings can be prepared and may pave the way for improved efficiencies of cerium utilization in oxidation catalysis.

Direct Operando Visualization of Metal Support Interactions Induced by Hydrogen Spillover During CO2 Hydrogenation

The understanding of catalyst active sites is a fundamental challenge for the future rational design of optimized and bespoke catalysts. For instance, the partial reduction of Ce4+ surface sites to Ce3+ and the formation of oxygen vacancies are critical for CO2 hydrogenation, CO oxidation, and the water gas shift reaction. Furthermore, metal nanoparticles, the reducible support, and metal support interactions are prone to evolve under reaction conditions; therefore a catalyst structure must be characterized under operando conditions to identify active states and deduce structure-activity relationships. In the present work, temperature-induced morphological and chemical changes in Ni nanoparticle-decorated mesoporous CeO2 by means of in situ quantitative multimode electron tomography and in situ heating electron energy loss spectroscopy, respectively, are investigated. Moreover, operando electron energy loss spectroscopy is employed using a windowed gas cell and reveals the role of Ni-induced hydrogen spillover on active Ce3+ site formation and enhancement of the overall catalytic performance.

Cerium-modified amorphous manganese oxides for efficient catalytic removal of ozone

Manganese-based catalysts were widely developed for catalytic removal of ozone, and the low stability and water inactivation are major challenges. To improve removal performance of ozone, three methods were applied to modify amorphous manganese oxides, including acidification, calcination and Ce modification. The physiochemical properties of prepared samples were characterized, and the catalytic activity for ozone removal was evaluated. All modification methods can promote the removal of ozone by amorphous manganese oxides, and Ce modification showed the most significant enhancement. It was confirmed that the introduction of Ce markedly changed the amount and property of oxygen vacancies in amorphous manganese oxides. Superior catalytic activity of Ce-MnO_x can be ascribed to its more content and enhanced formation ability of oxygen vacancies, larger specific surface area and higher oxygen mobility. Furthermore, the durability tests under high relative humidity (80%) determined that Ce-MnO_x showed excellent stability and water resistance. These demonstrate the promising potential of amorphously Ce-modified manganese oxides for catalytic removal of ozone.

Insights into degradation of pharmaceutical pollutant atenolol via electrochemical advanced oxidation processes with modified Ti4O7 electrode: Efficiency, stability and mechanism

A novel active Ce-doped Ti₄O₇ (Ti/Ti₄O₇-Ce) electrode was prepared and evaluated for improvement of the refractory pollutants degradation efficiency in Electrochemical advanced oxidation processes (EAOPs). The results showed that the addition of Ce in Ti/Ti₄O₇ electrode leading to great impact on •OH generation rate and electrode stability compared to pristine Ti/Ti₄O₇ electrode. Ti/Ti₄O₇-Ce electrode presented efficient oxidation capacity for pharmaceutical pollutant atenolol (ATL) in EAOPs, which could be attributed to the improvement of indirect oxidation mediated by electro-generated •OH, as the amount of •OH production was 16.5% higher than that in Ti/Ti₄O₇ within 120 min. The operational conditions greatly influenced the ATL degradation. The degradation efficiency of ATL increased as the current density, the degradation efficiency reached 100% under pH 4, but it just removed 81% of ATL under pH 10 after 120 min treatment. Results also suggested that the inhibiting effect from the ATL degradation was mostly associated with the decreased oxidation capacity induced by water hardness and natural organic matter (NOM). It displayed a satisfactory durability after 40 cycles of experimental detections in this research. The results of study suggested that Ti/Ti₄O₇-Ce was a promising electrode for the efficient degradation of PPCPs-polluted wastewater and provided constructive suggestion for the refractory pollutants of EAOPs.

Hydrogen Interaction with Oxide Supports in the Presence and Absence of Platinum

Oxides are essential catalysts and supports for noble metal catalysts. Their interaction with hydrogen enables, e.g., their use as a hydrogenation catalyst. Among the oxides considered reducible, substantial differences exist in their capability to activate hydrogen and how the oxide structure transforms due to this interaction. Noble metals, like platinum, generally enhance the oxide reduction by hydrogen spillover. This work presents a systematic temperature-programmed reduction study (300 to 873 K) of iron oxide, ceria, titania, zirconia, and alumina, with and without supported platinum. For all catalysts, platinum enhances the reducibility of the oxide. However, there are pronounced differences among all catalysts.

Unraveling Ce3+ detection at the surface of ceria nanopowders by UPS analysis

A sequential analysis using Ultra-violet Photoelectron Spectroscopy (UPS) and X-ray Photoelectron Spectroscopy (XPS) on ceria nanopowders has been implemented to identify the influence of the X-ray beam on the surface of this oxide. For the first time, UPS analysis evidenced the photoreductive effect of XPS analysis on ceria after an oxidative in situ pretreatment, leading to an overestimation of the Ce³⁺/Ce⁴⁺ ratio obtained by XPS. Based on this spectroscopy methodology, UPS imposes itself as a leading technique for analyzing powders with minimal impact on the authentic chemical state, thus paving the way for identifying the real ratio of Ce⁴⁺ and Ce³⁺ of ceria after oxidative and reductive in situ treatments.

Reversible dehydrogenation and rehydrogenation of cyclohexane and methylcyclohexane by single-site platinum catalyst

Developing highly efficient and reversible hydrogenation-dehydrogenation catalysts shows great promise for hydrogen storage technologies with highly desirable economic and ecological benefits. Herein, we show that reaction sites consisting of single Pt atoms and neighboring oxygen vacancies (V_O) can be prepared on CeO₂ (Pt₁/CeO₂) with unique catalytic properties for the reversible dehydrogenation and rehydrogenation of large molecules such as cyclohexane and methylcyclohexane. Specifically, we find that the dehydrogenation rate of cyclohexane and methylcyclohexane on such sites can reach values above 32,000 mol_H2 mol_Pt⁻¹ h⁻¹, which is 309 times higher than that of conventional supported Pt nanoparticles. Combining of DRIFTS, AP-XPS, EXAFS, and DFT calculations, we show that the Pt₁/CeO₂ catalyst exhibits a super-synergistic effect between the catalytic Pt atom and its support, involving redox coupling between Pt and Ce ions, enabling adsorption, activation and reaction of large molecules with sufficient versatility to drive abstraction/addition of hydrogen without requiring multiple reaction sites.

Developing highly efficient and reversible hydrogenation-dehydrogenation catalysts shows great promise for hydrogen storage technologies. Here the authors develop a highly efficient and reversible de/rehydrogenation single-site platinum catalyst which exhibits great promise for hydrogen storage technologies with cyclic alkanes/aromatics as liquid organic hydrogen carriers.

Highly sensitive and fast-response ethanol sensing of porous Co3O4 hollow polyhedra via palladium reined spillover effect

Highly sensitive and fast detection of volatile organic compounds (VOCs) in industrial and living environments is an urgent need. The combination of distinctive structure and noble metal modification is an important strategy to achieve high-performance gas sensing materials. In addition, it is urgent to clarify the chemical state and function of noble metals on the surface of the sensing material during the actual sensing process. In this work, Pd modified Co₃O₄ hollow polyhedral (Pd/Co₃O₄ HP) is developed through one-step pyrolysis of a Pd doped MOF precursor. At an operating temperature of 150 °C, the Pd/Co₃O₄ HP gas sensor can achieve 1.6 times higher sensitivity than that of Co₃O₄ HP along with fast response (12 s) and recovery speed (25 s) for 100 ppm ethanol vapor. Near-ambient pressure X-ray photoelectron spectroscopy (NAPXPS) was used to monitor the dynamic changes in the surface state of Pd/Co₃O₄ HP. The NAPXPS results reveal that the oxidation and reduction of Pd in the ethanol sensing process are attributed to a spillover effect of oxygen and ethanol, respectively. This work opens up an effective approach to investigate spillover effects in a sensing mechanism of noble metal modified oxide semiconductor sensors.

Pd/Co₃O₄ HP was developed by simple pyrolysis of Pd doped MOF, which achieved high sensitivity with fast response (12 s)/recovery speed (25 s) for 100 ppm ethanol. APXPS results provide experimental evidence to enhance performance by Pd spillover effect.

Photo-oxidative degradation of polyacids derived ceria nanoparticle modulation for chemical mechanical polishing

The effects of photo-oxidative degradation of polyacids at various concentrations and with different durations of ultraviolet (UV) irradiation on the photo-reduction of ceria nanoparticles were investigated. The effect of UV-treated ceria on the performance of chemical mechanical polishing (CMP) for the dielectric layer was also evaluated. When the polyacids were exposed to UV light, they underwent photo-oxidation with consumption of the dissolved oxygen in slurry. UV-treated ceria particles formed oxygen vacancies by absorbing photon energy, resulting in increased Ce³⁺ ions concentration on the surface, and when the oxygen level of the solution was lowered by the photo-oxidation of polymers, the formation of Ce³⁺ ions was promoted from 14.2 to 36.5%. Furthermore, chain scissions of polymers occurred during the oxidation process, and polyacids with lower molecular weights were found to be effective in ceria particle dispersion in terms of the decrease in the mean diameter and size distribution maintaining under 0.1 of polydispersity index. With increasing polyacid concentration and UV irradiation time, the Ce³⁺ concentration and the dispersity of ceria both increased due to the photo-oxidative degradation of the polymer; this enhanced the CMP performance in terms of 87% improved material removal rate and 48% lowered wafer surface roughness.

Revealing hydrogen spillover pathways in reducible metal oxides

Hydrogen spillover, the migration of dissociated hydrogen atoms from noble metals to their support materials, is a ubiquitous phenomenon and is widely utilized in heterogeneous catalysis and hydrogen storage materials. However, in-depth understanding of the migration of spilled hydrogen over different types of supports is still lacking. Herein, hydrogen spillover in typical reducible metal oxides, such as TiO₂, CeO₂, and WO₃, was elucidated by combining systematic characterization methods involving various in situ techniques, kinetic analysis, and density functional theory calculations. TiO₂ and CeO₂ were proven to be promising platforms for the synthesis of non-equilibrium RuNi binary solid solution alloy nanoparticles displaying a synergistic promotional effect in the hydrolysis of ammonia borane. Such behaviour was driven by the simultaneous reduction of both metal cations under a H₂ atmosphere over TiO₂ and CeO₂, in which hydrogen spillover favorably occurred over their surfaces rather than within their bulk phases. Conversely, hydrogen atoms were found to preferentially migrate within the bulk prior to the surface over WO₃. Thus, the reductions of both metal cations occurred individually on WO₃, which resulted in the formation of segregated NPs with no activity enhancement.

The hydrogen spillover pathway in typical reducible metal oxides, such as TiO₂, CeO₂, and WO₃, was investigated by combining various in situ characterization techniques, kinetic analysis, and density functional theory calculations.

Defect Engineering on a Ti4O7 Electrode by Ce3+ Doping for the Efficient Electrooxidation of Perfluorooctanesulfonate

Defect engineering in an electrocatalyst, such as doping, has the potential to significantly enhance its catalytic activity and stability. Herein, we report the use of a defect engineering strategy to enhance the electrochemical reactivity of Ti₄O₇ through Ce³⁺ doping (1-3 at. %), resulting in the significantly accelerated interfacial charge transfer and yielding a 37-129% increase in the anodic production of the hydroxyl radical (OH^•). The Ce³⁺-doped Ti₄O₇ electrodes, [(Ti_1-xCe_x)₄O₇], also exhibited a more stable electrocatalytic activity than the pristine Ti₄O₇ electrode so as to facilitate the long-term operation. Furthermore, (Ti_1-xCe_x)₄O₇ electrodes were also shown to effectively mineralize perfluorooctanesulfonate (PFOS) in electrooxidation processes in both a trace-concentration river water sample and a simulated preconcentration waste stream sample. A 3 at. % dopant amount of Ce³⁺ resulted in a PFOS oxidation rate 2.4× greater than that of the pristine Ti₄O₇ electrode. X-ray photoelectron spectroscopy results suggest that Ce³⁺ doping created surficial oxygen vacancies that may be responsible for the enhanced electrochemical reactivity and stability of the (Ti_1-xCe_x)₄O₇ electrodes. Results of this study provide insights into the defect engineering strategy for boosting the electrochemical performance of the Ti₄O₇ electrode with a robust reactivity and stability.

Dynamic structure of active sites in ceria-supported Pt catalysts for the water gas shift reaction

Oxide-supported noble metal catalysts have been extensively studied for decades for the water gas shift (WGS) reaction, a catalytic transformation central to a host of large volume processes that variously utilize or produce hydrogen. There remains considerable uncertainty as to how the specific features of the active metal-support interfacial bonding—perhaps most importantly the temporal dynamic changes occurring therein—serve to enable high activity and selectivity. Here we report the dynamic characteristics of a Pt/CeO₂ system at the atomic level for the WGS reaction and specifically reveal the synergistic effects of metal-support bonding at the perimeter region. We find that the perimeter Pt⁰ − O vacancy−Ce³⁺ sites are formed in the active structure, transformed at working temperatures and their appearance regulates the adsorbate behaviors. We find that the dynamic nature of this site is a key mechanistic step for the WGS reaction.

Revealing the structure and dynamics of active sites is essential to understand catalytic mechanisms. Here the authors demonstrate the dynamic nature of perimeter Pt⁰−O vacancy−Ce³⁺ sites in Pt/CeO₂ and the key effects of their dynamics on the mechanism of the water gas shift reaction.

CuCo alloy nanonets derived from CuCo2O4 spinel oxides for higher alcohols synthesis from syngas

Porous CuCo alloy nanonets were used as superior catalysts for higher alcohol synthesis from syngas. The catalyst was fabricated via structural topological transformation of CuCo2O4 spinel precursor.

Ceria-Based Catalysts Studied by Near Ambient Pressure X-ray Photoelectron Spectroscopy: A Review

The development of better catalysts is a passionate topic at the forefront of modern science, where operando techniques are necessary to identify the nature of the active sites. The surface of a solid catalyst is dynamic and dependent on the reaction environment and, therefore, the catalytic active sites may only be formed under specific reaction conditions and may not be stable either in air or under high vacuum conditions. The identification of the active sites and the understanding of their behaviour are essential information towards a rational catalyst design. One of the most powerful operando techniques for the study of active sites is near ambient pressure X-ray photoelectron spectroscopy (NAP-XPS), which is particularly sensitive to the surface and sub-surface of solids. Here we review the use of NAP-XPS for the study of ceria-based catalysts, widely used in a large number of industrial processes due to their excellent oxygen storage capacity and well-established redox properties.

Studies of CO2 hydrogenation over cobalt/ceria catalysts with in situ characterization: the effect of cobalt loading and metal–support interactions on the catalytic activity

Metal–oxide interactions affect the catalytic properties of Co/CeO₂ and can be used to control activity and selectivity.

FexNiy/CeO2 loaded on N-doped nanocarbon as an advanced bifunctional electrocatalyst for the overall water splitting

The synergy of each component in the Fe_xNi_y/CeO₂/NC renders outstanding electrocatalytic activities and stability toward the HER and OER.

Reduced SrTiO3-supported Pt-Cu alloy nanoparticles for preferential oxidation of CO in excess hydrogen

Activity and long-term stability of oxide-metal heterostructure catalysts can be engineered through tuning the oxygen storage capacity (OSC) of the support and careful control of the composition of the supported metal nanoparticle. In this work, we probe these two factors for microwave-synthesized PtCu alloy nanoparticles supported on reduced-SrTiO3. The heterostructures are tested for their activity towards preferential CO oxidation in the presence of H2 at typical operating temperatures used for polymer electrolyte membrane fuel cells (PEMFCs). Through controlled temperature programmed reduction/temperature programmed oxidation (TPR/TPO) experiments, we show that the OSC of the support can be enhanced through heavy surface reduction of SrTiO3. Adsorption-desorption experiments establish the strikingly different CO adsorption behavior over monometallic Pt and PtCu alloy nanoparticles. Through detailed catalytic studies, we establish a trend in the selectivity and stability of CO conversions over the PtCu alloy catalysts that can indeed be tuned by varying the PtCu composition in a facile microwave synthesis.

Towards the surface hydroxyl species in CeO2 nanoparticles

Understanding the complex chemistry of functional nanomaterials is of fundamental importance. Controlled synthesis and characterization at the atomic level is essential to gain deeper insight into the unique chemical reactivity exhibited by many nanomaterials. Cerium oxide nanoparticles have many industrial and commercial applications, resulting from very strong catalytic, pro- and anti-oxidant activity. However, the identity of the active species and the chemical mechanisms imparted by nanoceria remain elusive, impeding the further development of new applications. Here, we explore the behavior of cerium oxide nanoparticles of different sizes at different temperatures and trace the electronic structure changes by state-of-the-art soft and hard X-ray experiments combined with computational methods. We confirm the absence of the Ce(iii) oxidation state at the surface of CeO2 nanoparticles, even for particles as small as 2 nm. Synchrotron X-ray absorption experiments at Ce L3 and M5 edges, combined with X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM) and small angle X-ray scattering (SAXS) and theoretical calculations demonstrate that in addition to the nanoceria charge stability, the formation of hydroxyl groups at the surface profoundly affects the chemical performance of these nanomaterials.

Cerium-Oxide-Modified Anodes for Efficient and UV-Stable ZnO-Based Perovskite Solar Cells

CeO _x has been widely used in optoelectronic devices due to its special electronic and optical structure. Herein, CeO _x was directly doped into ZnO to successfully construct a ZnO/CeO _x electron transport material (ETM) used in perovskite solar cells (PSCs). The incorporation of CeO _x can regulate the chemical compatibility between ZnO and perovskite, unmatched energy levels, and poor UV stability, further enhancing the cell performance and stability of PSCs. As expected, the best efficiency of fabricated CH₃NH₃PbI₃-PSCs based on ZnO/CeO _x as the ETM was up to 19.5%. In contrast, the efficiency of PSCs with pure ZnO was 16.0%. Moreover, compared with PSCs based on ZnO, ZnO/CeO _x-based PSCs exhibited significantly enhanced moisture, and thermal and UV stability. These results point to the introduction of rare-earth oxides, which could accelerate the industrialization of PSCs.

Tuning Pt-CeO2 interactions by high-temperature vapor-phase synthesis for improved reducibility of lattice oxygen

In this work, we compare the CO oxidation performance of Pt single atom catalysts (SACs) prepared via two methods: (1) conventional wet chemical synthesis (strong electrostatic adsorption–SEA) with calcination at 350 °C in air; and (2) high temperature vapor phase synthesis (atom trapping–AT) with calcination in air at 800 °C leading to ionic Pt being trapped on the CeO₂ in a thermally stable form. As-synthesized, both SACs are inactive for low temperature (<150 °C) CO oxidation. After treatment in CO at 275 °C, both catalysts show enhanced reactivity. Despite similar Pt metal particle size, the AT catalyst is significantly more active, with onset of CO oxidation near room temperature. A combination of near-ambient pressure X-ray photoelectron spectroscopy (NAP-XPS) and CO temperature-programmed reduction (CO-TPR) shows that the high reactivity at low temperatures can be related to the improved reducibility of lattice oxygen on the CeO₂ support.

While single-atom catalysts (SACs) have attracted a lot of interest, the nature of the active sites in SACs remains elusive. Here the authors elucidate that depositing single atoms via high temperature synthesis leads to improved reducibility of lattice oxygen on CeO2 yielding low temperature reactivity of Pt catalysts in CO oxidation.

Nanofence Stabilized Platinum Nanoparticles Catalyst via Facet-Selective Atomic Layer Deposition

A facet-selective atomic layer deposition method is developed to fabricate oxide nanofence structure to stabilize Pt nanoparticles. CeO_x is selectively deposited on Pt nanoparticles' (111) facets and naturally exposes Pt (100) facets. The facet selectivity is realized through different binding energies of Ce precursor fragments chemisorbed on Pt (111) and Pt (100), which is supported by in situ mass gain experiment and corroborated by density functional theory simulations. Such nanofence structure not only has exposed Pt active facets for carbon monoxide oxidation but also forms ceria-metal interfaces that are beneficial for activity enhancement. The composite catalysts show excellent sintering resistance up to 700 °C calcination. CeO_x anchors Pt nanoparticles with a strong metal oxide interaction, and nanofence structure around Pt nanoparticles provides physical blocking that suppresses particles migration. The study reveals that forming oxide nanofence structure to encapsulate precious metal nanoparticles is an effective way to simultaneously enhance catalytic activity and thermal stability.

Introducing Time Resolution to Detect Ce3+ Catalytically Active Sites at the Pt/CeO2 Interface through Ambient Pressure X-ray Photoelectron Spectroscopy

X-ray photoelectron spectroscopy has been employed for the qualitative and quantitative characterization of both model and real catalytic surfaces. Recent progress in the detection of photoelectrons has enabled the acquisition of spectra at pressures up to a few tens of millibars. Although reducing the pressure gap represents a remarkable advantage for catalysis, active sites may be short-lived or hidden in the majority of spectator species. Time-resolved experiments, conducted under transient conditions, are a suitable strategy for discriminating between active sites and spectators. In the present work, we characterized the surface of a Pt/CeO₂ powder catalyst at 1.0 mbar of a reacting mixture of carbon monoxide and oxygen and, by means of time resolution, identified short-lived active species. We replaced oxygen with nitrogen in the reaction mixture while fast-detecting the core level peaks of cerium. The results indicate that active Ce³⁺ sites form transiently at the surface when the oxygen is switched off. Analysis of the depth profile shows that Ce³⁺ ions are located at the ceria surface. The same experiment, performed on platinum-free ceria, reveals negligible reduction, indicating that platinum boosts the formation of Ce³⁺ active sites at the interface.

The effect of CeO2–ZrO2 structural differences on the origin and reactivity of carbon formed during methane dry reforming over NiCo/CeO2–ZrO2 catalysts studied by transient techniques

The kinetic rate of inactive and active carbon formation in DRM over CeZrO₂-supported NiCo alloy particles depends on the support's oxygen mobility.

X-ray emission spectroscopy: highly sensitive techniques for time-resolved probing of cerium reactivity under catalytic conditions

Oxygen storage materials such as ceria are used in many catalytic applications because they can reversibly bind and release oxygen. Tools are needed to observe and quantify this activity which involves a change in the cerium oxidation state and to understand the involvement of cerium in catalytic processes. To prove that cerium changes its oxidation state in the catalytic cycle the transient rates of Ce³⁺ formation and decay should be compared to the overall reaction rate. For such mechanistic studies the time resolution is essential as the quantification of the Ce³⁺ species should be faster than the reaction rate. However, it is challenging to follow the dynamic changes of the cerium oxidation state under reaction conditions, especially when the concentration of cerium atoms involved in the reaction cycle is low. In this paper, we evaluate the sensitivity of high-resolution X-ray emission-based methods for the in situ time-resolved quantification of small concentrations of Ce³⁺ in ceria-based materials. We demonstrate that resonant X-ray emission spectroscopy (RXES) at optimal excitation energy is more sensitive than high energy resolution off-resonant spectroscopy (HEROS) and non-resonant X-ray emission spectroscopy (non-resonant XES) and that it can track the reactivity of less than 0.3% of cerium atoms in a 1% Pt/CeO₂ catalyst in a plug-flow reactor with sub-second time resolution. These results demonstrate that X-ray emission-based methods can be used as very sensitive tools and provide new insights into dynamic changes of the oxidation state in reducible oxides in a variety of applications.

Unravelling the Efficient Photocatalytic Activity of Boron-induced Ti3+ Species in the Surface Layer of TiO2

Ti³⁺ species are highly unstable in air owing to their facile oxidation into Ti⁴⁺ species, and thus they cannot concentrate in the surface layer of TiO₂ but are mainly present in its bulk. We report generation of abundant and stable Ti³⁺ species in the surface layer of TiO₂ by boron doping for efficient utilization of solar irradiation. The resultant photocatalysts (denoted as B-TiO_2−x) exhibit extremely high and stable solar-driven photocatalytic activity toward hydrogen production. The origin of the solar-light activity enhancement in the B-TiO_2−x photocatalysts has been thoroughly investigated by various experimental techniques and density functional theory (DFT) calculations. The unique structure invoked by presence of sufficient interstitial boron atoms can lead to substantial variations in density of states of B-TiO_2−x, which not only significantly narrow the band gap of TiO₂ to improve its visible-light absorption, but also promote the photogenerated electron mobility to enhance its solar-light photocatalytic activity.

Evidence for a surface gold hydride on a nanostructured gold catalyst

Inelastic neutron scattering and isotopic infrared spectroscopy shows formation of surface Au–H, an important intermediate in catalytic mechanisms.