Hydrogen spillover inspired bifunctional Platinum/Rhodium Oxide-Nitrogen-Doped carbon composite for enhanced hydrogen evolution and oxidation reactions in base

The poor activity of Pt-based-catalysts for alkaline hydrogen oxidation/evolution reaction (HOR/HER) encourages scientific society to design an effective electrocatalyst to develop alkaline fuel cells/electrolyzers. Herein, platinum/rhodium oxide-nitrogen-doped carbon (Pt/Rh2O3-CNx) composite is prepared for alkaline HER and HOR inspired by hydrogen spillover. The HER performance of Pt/Rh2O3-CNx is ∼ 6 times higher than Pt/C. In HOR, Pt/Rh2O3-CNx possesses an exchange current density of 657.60 mA/mgmetal, which is ∼ 3.4 times higher than Pt/C. Hydrogen and hydroxyl binding energy (HBE and OHBE) contribute equally to alkaline HOR/HER. The experimental and theoretical evidence suggests that the enhanced HER and HOR activity of Pt/Rh2O3-CNx may be due to hydrogen spillover from Pt to Rh2O3. Small work function difference [0.08 eV] of the system suggested hydrogen-spillover is feasible, which has been justified by reaction-free energy calculations. We proposed that the dissociation of hydrogen (H2) and water (H2O) occurs at Pt to form Pt-adsorbed hydrogen species (Pt-Had). Then, some Had moves to Rh2O3 through hydrogen spillover and reacts with neighboring Had or adsorbed hydroxyl species (OHad) to form H2 or H2O, which enhances the HER and HOR activity, respectively. The role of water-metal-hydroxyl species in the electrical double layer was also demonstrated on alkaline HOR/HER. This work may help to design the hydrogen-spillover-based catalysts for several renewable energy technologies.

Facet-Controlled Synthesis of Unconventional-Phase Metal Alloys for Highly Efficient Hydrogen Oxidation

Facet control and phase engineering of metal nanomaterials are both important strategies to regulate their physicochemical properties and improve their applications. However, it is still a challenge to tune the exposed facets of metal nanomaterials with unconventional crystal phases, hindering the exploration of the facet effects on their properties and functions. In this work, by using Pd nanoparticles with unconventional hexagonal close-packed (hcp, 2H type) phase, referred to as 2H-Pd, as seeds, a selective epitaxial growth method is developed to tune the predominant growth directions of secondary materials on 2H-Pd, forming Pd@NiRh nanoplates (NPLs) and nanorods (NRs) with 2H phase, referred to as 2H-Pd@2H-NiRh NPLs and NRs, respectively. The 2H-Pd@2H-NiRh NRs expose more (100)h and (101)h facets on the 2H-NiRh shells compared to the 2H-Pd@2H-NiRh NPLs. Impressively, when used as electrocatalysts toward hydrogen oxidation reaction (HOR), the 2H-Pd@2H-NiRh NRs show superior activity compared to the NiRh alloy with conventional face-centered cubic (fcc) phase (fcc-NiRh) and the 2H-Pd@2H-NiRh NPLs, revealing the crucial role of facet control in enhancing the catalytic performance of unconventional-phase metal nanomaterials. Density functional theory (DFT) calculations further unravel that the excellent HOR activity of 2H-Pd@2H-NiRh NRs can be attributed to the more exposed (100)h and (101)h facets on the 2H-NiRh shells, which possess high electron transfer efficiency, optimized H* binding energy, enhanced OH* binding energy, and a low energy barrier for the rate-determining step during the HOR process.

Contact Electrification as an Emerging Strategy for Controlling the Performance of Metal Nanoparticle Catalysts

Contact electrification (CE) is an emerging strategy for controlling the performance of metal nanoparticle (NP) catalysts. The underlying physical principle of this control is the sensitivity of the Fermi level to metal-metal contacts. This change in electronic structure has a direct impact on surface properties and chemical reactivity. The concept article briefly introduces the basic theory of CE and its relationship to catalytic performance. We then highlight selected recent examples of advances in the preparation of hybrid metal NP assemblies, experimental techniques for characterizing CE, and finally applications of CE for altering catalytic performance.

Cu Tailoring Pt Enables Branched-Structured Electrocatalysts with High Concave Surface Curvature Toward Efficient Methanol Oxidation

Surface engineering offers opportunities for the design and synthesis of Pt-based alloyed electrocatalysts with high mass activity and resistance to CO poisoning, which is of great significance for methanol electrooxidation. Surface curvature regulation may endow electrocatalysts with enhanced atomic utilization and abundance of unsaturated atoms; however, a reliable synthetic route for controlled construction of tailorable curved surface is still lacking. Here, a colloidal-chemical method to synthesize two types of PtCu branched-structured electrocatalysts, where the concave curvature can be customized is reported. These studies show that, among various synthesis parameters, the concentration of CuCl2·2H2O precursor is the key factor in manipulating the reaction kinetics and determining the concave surface curvature. Significantly, PtCu branched nanocrystals with long and sharp arms (PtCu BNCs-L), featuring a high concave surface curvature, exhibit remarkable activity and stability toward MOR, which is mainly attributed to advanced features of a highly concave surface and the synergistically bifunctional effect from introduced oxophilic Cu metal. In situ Raman spectroscopy and CO stripping test demonstrates weakened CO adsorption and accelerated CO removal on PtCu BNCs-L. This work highlights the importance of surface curvature, opening up an appealing route for the design and synthesis of advanced electrocatalysts with well-defined surface configurations.

Lattice engineering of noble metal-based nanomaterials via metal-nonmetal interactions for catalytic applications

Noble metal-based nanomaterials possess outstanding catalytic properties in various chemical reactions. However, the increasing cost of noble metals severely hinders their large-scale applications. A cost-effective strategy is incorporating noble metals with light nonmetal elements (e.g., H, B, C, N, P and S) to form noble metal-based nanocompounds, which can not only reduce the noble metal content, but also promote their catalytic performances by tuning their crystal lattices and introducing additional active sites. In this review, we present a concise overview of the recent advancements in the preparation and application of various kinds of noble metal-light nonmetal binary nanocompounds. Besides introducing synthetic strategies, we focus on the effects of introducing light nonmetal elements on the lattice structures of noble metals and highlight notable progress in the lattice strain engineering of representative core-shell nanostructures derived from these nanocompounds. In the meantime, the catalytic applications of the light element-incorporated noble metal-based nanomaterials are discussed. Finally, we discuss current challenges and future perspectives in the development of noble metal-nonmetal based nanomaterials.

Quantitative Study on the Influence of Bromide Ions toward the Reduction Kinetics for Size-Tunable Palladium Nanocubes

During the preparation of nanocrystals, regulating the dosage of key additives in the reaction system and the reaction temperature commonly affects the sizes and morphologies of the products. Despite the fact that bromide ions play a pivotal role in the synthesis of palladium nanocubes (Pd NCs), there is still a lack of quantitative and in-depth research on how the ions affect the reduction kinetics of Pd precursors and further on products. In this work, Pd NCs with different sizes have been prepared under various reaction conditions coupled to a systematic mechanism study. Quantitative measurements demonstrate that the reduction processes could be considered quasi-first-order reactions, and the corresponding kinetic parameters have been obtained. Furthermore, a linear relationship is discovered between k and the average size (d) of Pd NCs. The investigation on the growth patterns of four chosen systems reveals that given reaction conditions lead to certain results with unique growth patterns.

A universal strategy for green and surfactant-free synthesis of noble metal nanoparticles

We propose a universal, green, and surfactant-free strategy to synthesize noble metal particles with high monodispersity using gaseous H2 as a reducing agent in a solution at 60 °C. The prepared Pt nanoparticles have a 24 mV more positive half-wave potential than the commercially available Pt/C in the oxygen reduction reaction, while showing high durability with negligible half-wave potential decay after 10 000 cycles of testing.

Copper Materials for Caries Management: A Scoping Review

This study comprehensively reviewed the types, properties and potential applications of copper materials for caries management. Two researchers independently searched English publications using PubMed, Scopus and Web of Science. They screened the titles and abstracts of publications presenting original studies for review. They included 34 publications on copper materials, which were categorized as copper and copper alloy materials (13/34, 38%), copper salt materials (13/34, 38%) and copper oxide materials (8/34, 24%). All reported copper materials inhibited the growth of cariogenic bacteria such as Streptococcus mutans and Candida albicans. The materials could be doped into topical agents, restorative fillers, dental adhesives, drinking water, dental implants, orthodontic appliances, mouthwash and sugar. Most publications (29/34, 83%) were laboratory studies, five (5/34, 14%) were animal studies and only one paper (1/34, 3%) was clinical research. In conclusion, copper and copper alloy materials, copper salt materials and copper oxide materials have an antimicrobial property that inhibits cariogenic bacteria and Candida albicans. These copper materials may be incorporated into dental materials and even drinking water and sugar for caries prevention. Most publications are laboratory studies. Further clinical studies are essential to validate the effectiveness of copper materials in caries prevention.

High-entropy alloys in electrocatalysis: from fundamentals to applications

High-entropy alloys (HEAs) comprising five or more elements in near-equiatomic proportions have attracted ever increasing attention for their distinctive properties, such as exceptional strength, corrosion resistance, high hardness, and excellent ductility. The presence of multiple adjacent elements in HEAs provides unique opportunities for novel and adaptable active sites. By carefully selecting the element configuration and composition, these active sites can be optimized for specific purposes. Recently, HEAs have been shown to exhibit remarkable performance in electrocatalytic reactions. Further activity improvement of HEAs is necessary to determine their active sites, investigate the interactions between constituent elements, and understand the reaction mechanisms. Accordingly, a comprehensive review is imperative to capture the advancements in this burgeoning field. In this review, we provide a detailed account of the recent advances in synthetic methods, design principles, and characterization technologies for HEA-based electrocatalysts. Moreover, we discuss the diverse applications of HEAs in electrocatalytic energy conversion reactions, including the hydrogen evolution reaction, hydrogen oxidation reaction, oxygen reduction reaction, oxygen evolution reaction, carbon dioxide reduction reaction, nitrogen reduction reaction, and alcohol oxidation reaction. By comprehensively covering these topics, we aim to elucidate the intricacies of active sites, constituent element interactions, and reaction mechanisms associated with HEAs. Finally, we underscore the imminent challenges and emphasize the significance of both experimental and theoretical perspectives, as well as the potential applications of HEAs in catalysis. We anticipate that this review will encourage further exploration and development of HEAs in electrochemistry-related applications.

Coupling Glycerol Conversion with Hydrogen Production Using Alloyed Electrocatalysts

Herein, uniform precious alloys including PtAg, PdAg, and PtPdAg nanoparticles were synthesized as electrocatalysts for glycerol oxidation reaction (GOR). The structures of the samples were characterized by transmission electron microscopy, X-ray diffraction, and X-ray photoelectron spectrometry. The catalytic performance of the samples was evaluated in both alkaline and acidic electrolytes. Among the samples, PtPdAg exhibited superior activity with the largest current density of 3.77 mA cm-2 in alkaline solutions, which is 4.1 and 7.7 times those of Pd/C and Pt/C, respectively. In acidic solutions, the PtPdAg catalyst shows the highest current density of 0.58 mA cm-2, which is 1.8 times that of the Pt/C catalyst. The products of GOR were analyzed by high-performance liquid chromatography. Eight products including oxalic acid, tartronic acid, glyoxylic acid, glyceric acid, glyceraldehyde (GLAD), glycolic acid, lactic acid, and dihydroxyacetone were detected. Notably, in acidic solutions, PtAg and PtPdAg yielded the largest GLAD selectivity of 92.2% at 0.6 and 0.8 V, respectively. Using the alloyed catalysts, electrolysis processes coupling the GOR with the hydrogen evolution reaction were conducted. The conversion of glycerol and production of hydrogen were determined. To highlight the energy efficiency, a solar-panel-powered electrolysis process was conducted for the simultaneous production of hydrogen and high-valued products.

Plasmonic Nanostructure Engineering with Shadow Growth

Physical shadow growth is a vacuum deposition technique that permits a wide variety of 3D-shaped nanoparticles and structures to be fabricated from a large library of materials. Recent advances in the control of the shadow effect at the nanoscale expand the scope of nanomaterials from spherical nanoparticles to complex 3D shaped hybrid nanoparticles and structures. In particular, plasmonically active nanomaterials can be engineered in their shape and material composition so that they exhibit unique physical and chemical properties. Here, the recent progress in the development of shadow growth techniques to realize hybrid plasmonic nanomaterials is discussed. The review describes how fabrication permits the material response to be engineered and highlights novel functions. Potential fields of application with a focus on photonic devices, biomedical, and chiral spectroscopic applications are discussed.

Manipulating morphology and composition in colloidal heterometallic nanopods and nanodendrites

Branched Pt nanoparticles represent an exciting class of nanomaterials with high surface areas suitable for applications in electrocatalysis. Introducing a second metal can enhance performance and reduce cost. External factors such as capping agents and temperature have been used to offer insights into nanopod formation and to encourage their kinetic evolution. More recently, nanodendrites have been reported, though synthesis has generally been empirical; making controlled variation of morphology while maintaining bimetallic composition an elusive target. We report the combination of Pt with Fe under a range of conditions, yielding individually bimetallic nanoparticles whose construction sheds new light on nanopod and/or nanodendrite formation. Fine control of metal precursor reduction through modulating capping agents, reagents, and temperature initially directs nanopod synthesis. Morphology control is retained while composition is then varied from Pt-rich to Pt-poor. Additionally, conditions are identified that promote the collision-based branching of nanopod arms. This allows synthesis to be redirected for the selective growth of compositionally controlled nanodendrites in predictable fashion.

Efficacy of Fungi in the Decolorization and Detoxification of Remazol Brilliant Blue Dye in Aquatic Environments

Industrial effluents result in water pollution and affect the biological activity of aquatic and terrestrial life. In this study, efficient fungal strains were isolated from the aquatic environment and identified as Aspergillus fumigatus (SN8c) and Aspergillus terreus (SN40b). The isolates were selected based on their potential to efficiently decolorize and detoxify Remazol brilliant blue (RBB) dye, which is extensively used in different industries. Initially, a total of 70 different fungal isolates were screened. Among these, 19 isolates demonstrated dye decolorization capabilities, and SN8c and SN40b revealed the highest decolorization capabilities in liquid medium. The maximum estimated decolorization for SN8c was 91.3% and for SN40b, 84.5% at 40 mg/L of RBB dye in the presence of glucose (1 gm/L), after 5 days of incubation at different levels of pH, temperature, nutrient source, and concentration. RBB dye decolorization using SN8c and SN40b isolates was at a maximum of 99% at pH 3–5, whereas minimum decolorization was recorded as 71.29% and 73.4% SN8c, respectively, at pH 11. The maximum decolorization of the dye was 93% and 90.9% in a defined glucose concentration of 1 gm/L, and a 63.01% decrease was recorded in the decolorization activity at a low level of glucose concentration (0.2 gm/L). Finally, the decolorization and degradation were detected using UV spectrometry and HPLC. Toxicity tests of pure dye and treated dye samples were checked against the seed germination of different plants and the larvae mortality of Artemia salina. This study revealed that indigenous aquatic fungal flora can recover contaminated sites and support aquatic and terrestrial life.

Chemical Etching and Phase Transformation of Nickel-Cobalt Prussian Blue Analogs for Improved Solar-Driven Water-Splitting Applications

Although Prussian blue and its analogs (PB/PBAs) have open framework structures, large surface areas, uniform metal active sites, and tunable compositions, and have been investigated for a long time, owing to their unfavorable visible light responsiveness, they rarely been reported in photocatalysis. This largely limits their applications in solar-to-chemical energy conversion. Here, a continuous-evolution strategy was conducted to convert the poor-performance NiCo PBA (NCP) toward high-efficiency complex photocatalytic nanomaterials. First, chemical etching was performed to transform raw NCP (NCP-0) to hollow-structured NCP (including NCP-30, and NCP-60) with enhanced diffusion, penetration, mass transmission of reaction species, and accessible surface area. Then, the resultant hollow NCP-60 frameworks were further converted into advanced functional nanomaterials including CoO/3NiO, NiCoP nanoparticles, and CoNi₂S₄ nanorods with a considerably improved photocatalytic H₂ evolution performance. The hollow-structured NCP-60 particles exhibit an enhanced H₂ evolution rate (1.28 mol g^-1h^-1) compared with the raw NCP-0 (0.64 mol g^-1h^-1). Furthermore, the H₂ evolution rate of the resulting NiCoP nanoparticles reached 16.6 mol g^-1h^-1, 25 times that of the NCP-0, without any cocatalysts.

Low-Coordination Trimetallic PtFeCo Nanosaws for Practical Fuel Cells

Developing high-performance catalysts for fuel cell catalysis is the most critical and challenging step for the commercialization of fuel cell technology. Here 1D trimetallic platinum-iron-cobalt nanosaws (Pt₃ FeCo NSs) with low-coordination features are designed as efficient bifunctional electrocatalysts for practical fuel cell catalysis. The oxygen reduction reaction (ORR) activity of Pt₃ FeCo NSs (10.62 mA cm^-2 and 4.66 A mg^-1 _Pt at 0.90 V) is more than 25-folds higher than that of the commercial Pt/C, even after 30 000 voltage cycles. Density functional theory calculations reveal that the strong inter-d-orbital electron transfer minimizes the ORR barrier with higher selectivity at robust valence states. The volcano correlation between the intrinsic structure featured with low-coordination Pt-sites and corresponding electronic activities is discovered, which guarantees high ORR activities. The Pt₃ FeCo NSs located in the membrane electrode assembly (MEA) also achieve very high peak power density (1800.6 mW cm^-2 ) and competitive specific/mass activities (1.79 mA cm^-2 and 0.79 A mg^-1 _Pt at 0.90 V_iR-free cell voltage) as well as a long-term lifetime in specific H₂ O₂ medium for proton-exchange-membrane fuel cells, ranking top electrocatalysts reported to date for MEA. This work represents a class of multimetallic Pt-based nanocatalysts for practical fuel cells and beyond.

Emerging SERS biosensors for the analysis of cells and extracellular vesicles

Cells and their derived extracellular vesicles (EVs) or exosomes contain unique molecular signatures that could be used as biomarkers for the detection of severe diseases such as cancer, as well as monitoring the treatment response. Revealing these molecular signatures requires developing non-invasive ultrasensitive tools to enable single molecule/cell-level detection using a small volume of sample with low signal-to-noise ratio background and multiplex capability. Surface-enhanced Raman scattering (SERS) can address the current limitations in studying cells and EVs through two main mechanisms: plasmon-enhanced electric field (the so-called electromagnetic mechanism (EM)), and chemical mechanism (CM). In this review, we first highlight these two SERS mechanisms and then discuss the nanomaterials that have been used to develop SERS biosensors based on each of the aforementioned mechanisms as well as the combination of these two mechanisms in order to take advantage of the synergic effect between electromagnetic enhancement and chemical enhancement. Then, we review the recent advances in designing label-aided and label-free SERS biosensors in both colloidal and planar systems to investigate the surface biomarkers on cancer cells and their derived EVs. Finally, we discuss perspectives of emerging SERS biosensors in future biomedical applications. We believe this review article will thus appeal to researchers in the field of nanobiotechnology including material sciences, biosensors, and biomedical fields.

High Entropy van der Waals Materials

By breaking the restrictions on traditional alloying strategy, the high entropy concept has promoted the exploration of the central area of phase space, thus broadening the horizon of alloy exploitation. This review highlights the marriage of the high entropy concept and van der Waals systems to form a new family of materials category, namely the high entropy van der Waals materials (HEX, HE = high entropy, X = anion clusters) and describes the current issues and next challenges. The design strategy for HEX has integrated the local feature (e.g., composition, spin, and valence states) of structural units in high entropy materials and the holistic degrees of freedom (e.g., stacking, twisting, and intercalating species) in van der Waals materials, and is successfully used for the discovery of high entropy dichalcogenides, phosphorus tri-chalcogenides, halogens, and MXene. The rich combination and random distribution of the multiple metallic constituents on the nearly regular 2D lattice give rise to a flexible platform to study the correlation features behind a range of selected physical properties, e.g., superconductivity, magnetism, and metal-insulator transition. The deliberate design of structural units and their stacking configuration can also create novel catalysts to enhance their performance in a bunch of chemical reactions.

High-Entropy Intermetallic PtRhBiSnSb Nanoplates for Highly Efficient Alcohol Oxidation Electrocatalysis

The control of multimetallic ensembles at the atomic-level is challenging, especially for high-entropy alloys (HEAs) possessing five or more elements. Herein, the one-pot synthesis of hexagonal-close-packed (hcp) PtRhBiSnSb high-entropy intermetallic (HEI) nanoplates with intrinsically isolated Pt, Rh, Bi, Sn, and Sb atoms is reported, to boost the electrochemical oxidation of liquid fuels. Taking advantage of these combined five metals, the well-defined PtRhBiSnSb HEI nanoplates exhibit a remarkable mass activity of 19.529, 15.558, and 7.535 A mg^-1 _Pt+Rh toward the electrooxidation of methanol, ethanol, and glycerol in alkaline electrolytes, respectively, representing a state-of-the-art multifunctional electrocatalyst for alcohol oxidation reactions. In particular, the PtRhBiSnSb HEI achieves record-high methanol oxidation reaction (MOR) activity in an alkaline environment. Theoretical calculations demonstrate that the introduction of the fifth metal Rh enhances the electron-transfer efficiency in PtRhBiSnSb HEI nanoplates, which contributes to the improved oxidation capability. Meanwhile, robust electronic structures of the active sites are achieved due to the synergistic protections from Bi, Sn, and Sb sites. This work offers significant research advances in developing well-defined HEA with delicate control over compositions and properties.

Fabrication of Gold-Based "Sphere-on-Plate" Hybrid Nanostructures with Dual Plasmonic Absorptions Covering Visible and Near-Infrared II Windows via the Volmer-Weber Growth Mode

We report a synthetic strategy to create gold(Au)-based "sphere-on-plate" hybrid nanostructures (SPHNSs). The surface doping of plate-like Au seeds with Pt/Ag atoms is found to be crucial to increase the lattice spacing, inducing island-like deposition of Au atoms via the Volmer-Weber growth mode. The resulting products are featured with the morphology that quasi-spherical nanoparticles are scattered over the nanoplates. Due to the presence of two distinctly dimensioned particles in one entity, the current Au-based SPHNSs exhibit unique dual plasmonic absorptions, where the visible absorbance centered at 546 nm is related to the size of the anchored particles. Arising from such a plasmonic advantage, the Au-based SPHNSs exhibit enhancement in photothermal conversion under laser irradiations at the wavelengths of both 808 and 1064 nm. The current work offers a feasible route to fabricate noble metal hybrid nanostructures involving zero-dimensional (0D) and two-dimensional (2D) structures, which could work as promising materials for photothermal conversion.

Ultrathin and Porous 2D PtPdCu Nanoalloys as High-Performance Multifunctional Electrocatalysts for Various Alcohol Oxidation Reactions

We precisely synthesized two-dimensional (2D) PtPdCu nanostructures with the morphology varying from porous circular nanodisks (CNDs) and triangular nanoplates (TNPs) to triangular nanoboomerangs (TNBs) by tuning the molar ratios of metal precursors. The PtPdCu trimetallic nanoalloys exhibit superior electrocatalytic performances to alcohol oxidation reactions due to their unique structural features and the synergistic effect. Impressively, PtPdCu TNBs exhibit a high mass activity of 3.42 mg_Pt+Pd^-1 and 1.06 A·mg_Pt^-1 for ethanol and methanol oxidation compared to PtPd, PtCu, and pure Pt, which is 3.93 and 4.07 times that of commercial Pt/C catalysts, respectively. Moreover, 2D PtPdCu TNPs and PtPdCu CNDs also show a highly improved electrocatalytic activity. Furthermore, as all-in-one electrocatalysts, PtPdCu nanoalloys display excellent electrocatalytic activity and stability toward the oxidation of other alcohol molecules, such as isopropyl alcohol, glycerol, and ethylene glycol. The enhanced mechanism was well proposed to be the abundant active sites and upshifted d-band center based on density functional theory calculations.

Insight into the effects of the crystal phase of Ru over ultrathin Ru@Pt core-shell nanosheets for methanol electrooxidation

Coating a second metal on the surface of ultrathin 2D nanosheets (NSs) could induce lattice strain and modify the electronic structure, thereby changing the surface reactivity. Herein, we report the effects of different crystal phases of Ru on the electrocatalytic performance of ultrathin Ru@Pt core-shell NSs for the methanol oxidation reaction (MOR). Importantly, Ru with a novel face-centered-cubic phase was found to have more effect on the electronic structure of Pt than Ru with a conventional hexagonal close-packed phase, thereby leading to improved electrocatalytic activity toward the MOR under acidic and basic conditions. It is believed that the strategy presented here would offer a new approach to the construction of bimetallic core-shell nanostructures with various promising applications.

Single source precursor route for the first graphene oxide-Pd6P nanocomposite: application in electrochemical hydrogen evolution reaction

For the first time, Pd₆P has been synthesised using a simple, straightforward and one-pot method i.e., thermolysis of a Pd(II) complex of a bidentate (P, N) organophosphorus ligand (anthracene-9-yl-CHN-CH₂CH₂-PPh₂). The electrocatalyst (obtained after grafting nanospheres of Pd₆P over layers of graphene oxide) shows high activity in electrochemical hydrogen evolution reactions (HER) with an overpotential of 133 mV to drive 10 mA cm^-2 of cathodic current density. The GO-Pd₆P nanocomposite is robust and effective for a continuous HER run for up to 16 hours.

Revealing the structure-activity relationship in woven covalent organic frameworks for the electrocatalytic oxygen reduction reaction

Woven covalent organic frameworks (COFs) possess three-dimensional (3D) frameworks with well-dispersed variable metal centers, showing great promise in heterogeneous catalysis. Until now, woven COFs have not been exploited as catalysts. Herein, COF-112 (a typical woven COF) is utilized as an ORR catalyst to reveal the role of the metal center and linkage. Through metal center variation, the optimal COF-112Co with imine linkage exhibits superior ORR activity (E_onset = 0.87 V vs. RHE, n = 3.86, and J_L = 5.78 mA cm^-2). Experimental and theoretical studies demonstrate the non-metallic ORR active site and confirm the influence of metal variation in COF-112. A linkage conversion strategy reveals the importance of the imine linkage on the 4e^- ORR. This work reveals the structure-activity relationship of woven COFs, which will broaden the application of COFs and extend the diversity of electrocatalysts.

Assembly of Alloyed PdCu Nanosheets and Their Electrocatalytic Oxidation of Ethanol

Two-dimensional (2D) nanostructured catalysts have attracted great attention in many important fields, including energy applications and chemical industry. In this study, PdCu nanosheet assemblies (NSAs) have been synthesized and investigated as electrocatalysts for direct ethanol fuel cells in an alkaline medium. A great number of active sites on the nanosheets of PdCu NSAs for ethanol electro-oxidation are exposed, where the electron structures are optimized combined with the second element copper. Electrochemical measurements show that PdCu NSA1 exhibits excellent catalytic activity (2536 mA mg^-1) and cyclic stability compared to PdCu NSA2 (1700 mA mg^-1) and PdCu NSA3 (1436 mA mg^-1), much higher than commercial Pd/C. Kinetics studies on the electrolysis of ethanol suggest that PdCu NSAs should be more favorable at higher catalytic temperatures, higher concentrations of ethanol, and low pH value environments. The unique composition and structures PdCu NSA1 would result in the lowest energy barrier in the rate-controlling step of the ethanol oxidation reaction (EOR), confirmed by density functional theory (DFT). The formation mechanism of PdCu NSAs and their excellent electrocatalytic activity toward EOR have been discussed and analyzed.

Hexagonal PtBi Intermetallic Inlaid with Sub-Monolayer Pb Oxyhydroxide Boosts Methanol Oxidation

Engineering multicomponent nanocatalysts is effective to improve electrocatalysis in many applications, yet it remains a challenge in constructing well-defined multimetallic active sites at the atomic level. Herein, the surface inlay of sub-monolayer Pb oxyhydroxide onto hexagonal PtBi intermetallic nanoplates with intrinsically isolated Pt atoms to boost the methanol oxidation reaction (MOR) is reported. The well-defined PtBi@6.7%Pb nanocatalyst exhibits 4.0 and 7.4 times higher mass activity than PtBi nanoplates and commercial Pt/C catalyst toward MOR in the alkaline electrolyte at 30 °C. Meanwhile, it also achieves a record-high mass activity of 51.07 A mg^-1 _Pt at direct methanol fuel cells operation temperature of 60 °C. DFT calculations reveal that the introduction of Pb oxyhydroxide on the surface not only promotes the electron transfer efficiency but also suppresses the CO poisoning effect, and the efficient p-d coupling optimizes the electroactivity of PtBi@6.7%Pb nanoplates toward the MOR process with low reaction barriers. This work offers a nanoengineering strategy to effectively construct and modulate multimetallic nanocatalysts to improve the electroactivity toward the MOR in future research.

Kinetics-Controlled Synthesis of Gold-Silver Nanosheets with Abundant in-Plane Cracking and Their Trimetallic Derivatives for Plasmon-Enhanced Catalysis

Controlled synthesis of two-dimensional noble metal nanomaterials with in-plane branching morphology has been of great research interest recently, which yet achieves limited success for AuAg-based nanocrystals. Herein, we report the...

Electrolyte buffering species as oxygen donor shuttles in CO electrooxidation

Electrolyte buffering species have been shown to act as proton donors in the hydrogen evolution reaction (HER). Analogously, we study here whether these electrolyte species may participate in other reactions by investigating CO electrooxidation (COOR) on a gold rotating disk electrode. This model system, characterized by fast kinetics, exhibits a diffusion-limited regime, which helps in the identification of the species dictating the diffusion-limited current. Through a systematic concentration dependence study in a variety of buffers, we show that electrolyte buffering species act as oxygen donor shuttles in COOR, lowering the reaction overpotential. A similar correlation between electrolyte and electrocatalytic activity was observed for COOR on a different electrode material (Pt). Probing the electrode-electrolyte interface by attenuated total reflection infrared spectroscopy (ATR-FTIR) and modelling the surface speciation to include the effect of the solution reactions, we propose that the buffer conjugated base generates the oxygen donor (i.e. OH^-) through its acid-base reaction with water.

Emerging two-dimensional nanomaterials for electrochemical nitrogen reduction

Ammonia (NH₃) is essential to serve as the biological building blocks for maintaining organism function, and as the indispensable nitrogenous fertilizers for increasing the yield of nutritious crops. The current Haber-Bosch process for industrial NH₃ production is highly energy- and capital-intensive. In light of this, the electroreduction of nitrogen (N₂) into valuable NH₃, as an alternative, offers a sustainable pathway for the Haber-Bosch transition, because it utilizes renewable electricity and operates under ambient conditions. Identifying highly efficient electrocatalysts remains the priority in the electrochemical nitrogen reduction reaction (NRR), marking superior selectivity, activity, and stability. Two-dimensional (2D) nanomaterials with sufficient exposed active sites, high specific surface area, good conductivity, rich surface defects, and easily tunable electronic properties hold great promise for the adsorption and activation of nitrogen towards sustainable NRR. Therefore, this Review focuses on the fundamental principles and the key metrics being pursued in NRR. Based on the fundamental understanding, the recent efforts devoted to engineering protocols for constructing 2D electrocatalysts towards NRR are presented. Then, the state-of-the-art 2D electrocatalysts for N₂ reduction to NH₃ are summarized, aiming at providing a comprehensive overview of the structure-performance relationships of 2D electrocatalysts towards NRR. Finally, we propose the challenges and future outlook in this prospective area.

Hybrid EuIII Coordination Luminophore Standing on Two Legs on Silica Nanoparticles for Enhanced Luminescence

In this study, we have demonstrated a two-legged, upright molecular design method for monochromatic and bright red luminescent Ln^III -silica nanomaterials. A novel Eu^III -silica hybrid nanoparticle was developed by using a doubly binding TPPO-Si(OEt)₃ (TPPO: triphenyl phosphine oxide) linker. The TPPO-Si(OEt)₃ was confirmed by ¹ H, ³¹ P, ²⁹ Si NMR spectroscopy and single-crystal X-ray analysis. Luminescent Eu(hfa)₃ and Eu(tfc)₃ moieties (hfa: hexafluoroacetylacetonate, tfc: 3-(trifluoromethylhydroxymethylene)camphorate) were fixed onto TPPO-Si(OEt)₃ -modified silica nanoparticles, producing Eu(hfa)₃ (TPPO-Si)₂ -SiO₂ and Eu(tfc)₃ (TPPO-Si)₂ -SiO₂ , respectively. Eu(hfa)₃ (TPPO-Si)₂ -SiO₂ exhibited the higher intrinsic luminescence quantum yield (93 %) and longer emission lifetime (0.98 ms), which is much larger than those of previously reported Eu^III -based hybrid materials. Eu(tfc)₃ (TPPO-Si)₂ -SiO₂ showed an extra-large intrinsic emission quantum yield (54 %), although the emission quantum yield for the precursor Eu(tfc)₃ (TPPO-Si(OEt)₃ )₂ was found to be 39 %. These results confirmed that the TPPO-Si(OEt)₃ linker is a promising candidate for development of Eu^III -based luminescent materials.

Enhanced oxygen reduction and methanol oxidation reaction over self-assembled Pt-M (M = Co, Ni) nanoflowers

Herein, we introduce a facile approach to synthesize a unique class of Pt-M (M = Ni, Co) catalysts with a nanoflower structure for boosting both oxygen reduction reaction (ORR) and methanol oxidation reaction (MOR). By controlling the surface-active agents, we modified the functional groups surrounding the Pt atoms, tuned the alloying of Pt and the transition metals Ni and Co, and prepared two different kinds of nanodendrites. Their successful synthesis depends on the selection and amount of surfactants (hexadecyltrimethylammonium bromide (CTAB), Polyvinylpyrrolidone (PVP)). Besides, by controlling reaction time, we also explored the forming procedures for Pt-Co globularia nanodendrite (Pt-Co GND) and Pt-Ni petalody nanodendrite (Pt-Ni PND). Our investigation highlights the importance of complex nanoarchitecture, which enables surface and interface modification to achieve excellent catalytic performance in fuel cell electrocatalysis. The characterization of the as-prepared catalysts reveals a high electrochemical surface area and mass activity (2041 mAmg_Pt^-1and 950 mAmg_Pt^-1 for Pt-Co GND and Pt-Ni PND, respectively, for ORR). Furthermore, Pt-Co GND showed a high MOR activity, with a mass activity value recorded at 1615 mAmg_Pt^-1 which is far superior to that for Pt/C. Moreover, both catalysts retain high activity after accelerated durability tests (ADTs). The electron transfer number was calculated by performing the rotating ring-disk electrode (RRDE) measurements. Due to abundant active sites of Pt, both Pt-Co GND and Pt-Ni PND exhibit a 4e^- pathway for ORR with electron transfer number of >3.95.

3D Anisotropic Au@Pt-Pd Hemispherical Nanostructures as Efficient Electrocatalysts for Methanol, Ethanol, and Formic Acid Oxidation Reaction

Anisotropic 3D nanostructures exhibit excellent electrocatalytic activity and stability due to their heterogeneous elemental distribution and unsymmetrical configuration. However, it is still a huge challenge to combine anisotropically distributed elements and anisotropic morphologies within one 3D nanostructure. Herein, 3D Au@Pt-Pd hemispherical nanostructures (Au@Pt-Pd H-Ss) are fabricated as highly efficient electrocatalysts for oxidation reaction, which present heterogenous element distribution and anisotropic morphology. It is demonstrated that the non-uniform adsorption of BO₂ ^- on Au-CTA⁺ surface, as well as the simulated lower formation energy of Pt-Pd atoms for Au-CTA⁺ -BO₂ ^- , basically contribute to the eventual formation of Au@Pt-Pd H-Ss. Impressively, the unique anisotropic Au@Pt-Pd H-Ss exhibit superior electrocatalytic activity and durability for methanol, ethanol, and formic acid oxidation reaction compared with commercial Pt/C and previously reported noble-metal based electrocatalysts. Especially, the mass activity of Au@Pt-Pd H-Ss for MOR is 4.38 A mg_Pt+Pd ^-1 , which is about 2.0 and 4.7 times that of Au@Pt-Pd spherical nanostructures (Au@Pt-Pd Ss) and commercial Pt/C catalyst, respectively. This work provides an important reference for the design and preparation of 3D anisotropic and high-efficiency electrocatalysts.

Electronic Modulation of Non-van der Waals 2D Electrocatalysts for Efficient Energy Conversion

The exploration of efficient electrocatalysts for energy conversion is important for green energy development. Owing to their high surface areas and unusual electronic structure, 2D electrocatalysts have attracted increasing interest. Among them, non-van der Waals (non-vdW) 2D materials with numerous chemical bonds in all three dimensions and novel chemical and electronic properties beyond those of vdW 2D materials have been studied increasingly over the past decades. Herein, the progress of non-vdW 2D electrocatalysts is critically reviewed, with a special emphasis on electronic structure modulation. Strategies for heteroatom doping, vacancy engineering, pore creation, alloying, and heterostructure engineering are analyzed for tuning electronic structures and achieving intrinsically enhanced electrocatalytic performances. Lastly, a roadmap for the future development of non-vdW 2D electrocatalysts is provided from material, mechanism, and performance viewpoints.

Highly efficient blackberry-like trimetallic PdAuCu nanoparticles with optimized Pd content for ethanol electrooxidation

The rational design of highly efficient catalysts for ethanol electrooxidation is extremely challenging for developing direct ethanol fuel cells (DEFCs). Herein, a facile one-pot method has been developed to prepare blackberry-like PdAuCu nanoparticles (NPs) with tunable composition and surface structures. Among PdAuCu NPs with different Pd contents (1.6-22 mass%), PdAuCu NPs-0.5 (contained Pd at 2.5 mass%) delivered one of the highest catalytic activities of Pd-based catalysts towards ethanol electrooxidation, exhibiting a mass activity of 23.0 A mg_Pd^-1. Kinetic analysis, electrochemical impedance spectroscopy and CO stripping test results suggested that the excellent electrocatalytic activity may originate from the optimized balance between Pd content and surface structure of PdAuCu NPs-0.5. The optimization of the balance between composition and surface structure would contribute to the further design of multimetallic nanoparticles for fuel cells and other applications.

Ultrathin and Wavy PdB Alloy Nanowires with Controlled Surface Defects for Enhanced Ethanol Oxidation Electrocatalysis

Engineering crystalline structures/defects and elemental compositions is synthetically critical to optimize surface features of noble metal nanocrystals and thus improve their catalytic performances in various reactions. In this manuscript, we report a facile one-step aqueous synthesis of one-dimensional (1D) noble metal-metalloid alloy nanowires (NWs) with an ultrathin and wavy morphology, controlled crystalline defects, and binary PdB compositions as a highly efficient catalyst toward the electrochemical ethanol oxidation reaction (EOR). We show that the utilization of hexadecylpyridinium chloride as functional surfactant is of great importance to confine in-the-columnar epitaxial nucleation of anisotropic ultrathin PdB NWs, while the attachment growth precisely controls their surface crystalline defects with a wavy morphology. Meanwhile, this strategy is synthetically universal and can be readily extended to engineer an ultrathin wavy morphology and crystalline defect of ternary PdMB (M = Cu and Pt) alloy NWs. Owing to multiple structural and compositional merits, resultant PdB alloy NWs synergistically expose more electrocatalytically active sites and also kinetically accelerate the removal of CO-related poisons, remarkably improving electrocatalytic EOR activity and stability compared to their counterpart catalysts. Besides, wavy PdB alloy NWs are also electrochemically more active for electrocatalytic oxidation of other alcohols (methanol, glycerol, and glucose). The findings reported here thus shed a bright light on rational design of the high-performance metal alloy catalysts for their potential applications in fine chemical synthesis, fuel cells, and beyond.

Few-nm-sized, phase-pure Au5Sn intermetallic nanoparticles: synthesis and characterization

Nanoparticles of intermetallic compounds have attracted much interest because they can exhibit novel electronic and catalytic properties due to their specific crystal structure, ordered atomic arrangement, and quantum effect. Here, gold-tin (AuSn) bimetallic nanoparticles with various mixing ratios were prepared by a co-reduction method using various protective agents (e.g., polymer, amine, phosphine, carboxylic acid, and thiol). Powder X-ray diffractometry and transmission electron microscopy revealed that few-nm-sized, phase-pure Au5Sn intermetallic nanoparticles (IMNPs) were successfully synthesized when Au3+ and Sn2+ precursors with a ratio of 6 : 4 were co-reduced in the presence of oleylamine. The Au5Sn IMNPs thus prepared did not exhibit localized surface plasmon resonance, in contrast to pure Au nanoparticles of comparable sizes. This suggests that interband transition dominates the optical response due to an increase in the density of states near the Fermi level by introducing Sn. The Au5Sn IMNPs supported on mesoporous silica (SBA-15) catalyzed the aerobic oxidation reaction of indanol.

In Search of Excellence: Convex versus Concave Noble Metal Nanostructures for Electrocatalytic Applications

Controlling the shape of noble metal nanoparticles is a challenging but important task in electrocatalysis. Apart from hollow and nanocage structures, concave noble metal nanoparticles are considered a new class of unconventional electrocatalysts that exhibit superior electrocatalytic properties as compared with those of conventional nanoparticles (including convex and flat ones). Herein, several facile and highly reproducible routes for synthesizing nanostructured concave noble metal materials reported in the literature are discussed, together with their advantages over noble metal nanoparticles with convex shapes. In addition, possible ways of optimizing the synthesis procedure and enhancing the electrocatalytic characteristics of concave metal nanoparticles are suggested. Nanostructured noble metals with concave features are found to show better catalytic activity and stability hence improve their practical applicability in electrocatalysis.

A Robust PtNi Nanoframe/N-Doped Graphene Aerogel Electrocatalyst with Both High Activity and Stability

Insufficient catalytic activity and stability and high cost are the barriers for Pt-based electrocatalysts in wide practical applications. Herein, a hierarchically porous PtNi nanoframe/N-doped graphene aerogel (PtNiNF-NGA) electrocatalyst with outstanding performance toward methanol oxidation reaction (MOR) in acid electrolyte has been developed via facile tert-butanol-assisted structure reconfiguration. The ensemble of high-alloying-degree-modulated electronic structure and correspondingly the optimum MOR reaction pathway, the structure superiorities of hierarchical porosity, thin edges, Pt-rich corners, and the anchoring effect of the NGA, endow the PtNiNF-NGA with both prominent electrocatalytic activity and stability. The mass and specific activity (1647 mA mg_Pt ^-1 , 3.8 mA cm^-2 ) of the PtNiNF-NGA are 5.8 and 7.8 times higher than those of commercial Pt/C. It exhibits exceptional stability under a 5-hour chronoamperometry test and 2200-cycle cyclic voltammetry scanning.