A novel Ag-loaded 4 Å zeolite as an efficient catalyst for epoxidation of styrene

In this study, a novel Ag-loaded 4 Å zeolite was synthesized through the combined action of strong ultrasound and a high-voltage electrostatic field (the Z-Ag-UE) and its catalytic activity was evaluated in the epoxidation of styrene. The prepared catalysts were characterized using XRD, SEM, XPS, BET, TG, ICP-OES. The results showed that the silver evenly dispersed inside the octahedral 4 Å zeolite structure rather than being attached to the surface of the material like in the impregnation method, and this Ag-loaded 4 Å zeolite had a high surface area, uniform particle size distribution, and excellent high temperature thermal stability. The catalytic performance of the Ag-loaded 4 Å zeolite was investigated by varying the reaction conditions such as the amount of catalyst, temperature, and reaction time. Under optimized conditions, the Ag-loaded 4 Å zeolite showed high selectivity and conversion for the epoxidation of styrene, achieving a conversion rate of up to 98% and a selectivity of 94%. In particular, the catalyst had excellent recyclability and was reused more than fifteen times with the catalytic performance remaining unchanged. This method of loading metal prepared under external field conditions provides a new method and idea for future research in related fields.

Novel nanostructure approach for antibiotic decomposition in a spinning disc photocatalytic reactor

Conventional wastewater treatment processes are often unable to remove antibiotics with resistant compounds and low biological degradation. The need for advanced and sustainable technologies to remove antibiotics from water sources seems essential. In this regard, the effectiveness of a spinning disc photocatalytic reactor (SDPR) equipped with a visible light-activated Fe3O4@SiO2-NH2@CuO/ZnO core-shell (FSNCZ CS) thin film photocatalyst was investigated for the decomposition of amoxicillin (AMX), a representative antibiotic. Various characterization techniques, such as TEM, FESEM, EDX, AFM, XRD, and UV-Vis-DRS, were employed to study the surface morphology, optoelectronic properties, and nanostructure of the FSNCZ CS. Key operating parameters such as irradiation time, pH, initial AMX concentration, rotational speed, and solution flow rate were fine-tuned for optimization. The results indicated that the highest AMX decomposition (98.7%) was attained under optimal conditions of 60 min of irradiation time, a rotational speed of 350 rpm, a solution flow rate of 0.9 L/min, pH of 5, and an initial AMX concentration of 20 mg/L. Moreover, during the 60 min irradiation time, more than 69.95% of chemical oxygen demand and 61.2% of total organic carbon were removed. After the photocatalytic decomposition of AMX, there is a substantial increase in the average oxidation state and carbon oxidation state in SDPR from 1.33 to 1.94 and 3.2, respectively. Active species tests confirmed that ·OH and ·O2- played a dominant role in AMX decomposition. The developed SDPR, which incorporates a reusable and robust FSNCZ CS photocatalyst, demonstrates promising potential for the decomposition of organic compounds.

TiO2 supported cobalt oxide for olefin epoxidation reaction - characterization, catalytic activities and mechanism - using a DFT model

Metal oxide catalysts are known to trigger C-H bond activation selectively, indicating their suitability for olefin epoxidation. Nano-structured Co₃O₄ supported on TiO₂ was prepared for selective epoxidation of a number of olefins under optimized reaction conditions. An appropriate synthetic procedure yielded a catalytic material (Co-Ti (NP)^HT) with desired crystal size and interface conditions. Incorporation of Co into the Ti matrix resulted in an enhancement in the specific surface of Ti-Co nanoparticles (77.93 m² g^-1). XPS measurements evaluated the surface cobalt atom concentration (5.77%) in Ti-Co(NP)^HT, indicating more dispersion of cobalt oxide species. Catalytic application of the material, using various olefins (under optimized reaction conditions) shows higher conversion (>85%) in a 6-h time interval. The substrate : oxidant (H₂O₂) concentration in an optimized molar ratio of 1 : 2 shows high olefin conversion for the formation of olefin oxide. The reactivity of olefins was found to be in the order: cyclohexene > methylstyrene > styrene > chlorostyrene > p-nitrostyrene. A DFT model compared the HOMO-LUMO energies of styrene and its substituted forms. The reusability of Ti-Co (NP)^HT tested up to four continuous cycles of batch operations indicates a negligible loss (0.25-0.30%) of catalytic activity.

Metal-Organic Frameworks Decorated Cu2O Heterogeneous Catalysts for Selective Oxidation of Styrene

The selective oxidation of styrene with highly efficient, environmentally benign, and cost-effective catalysts are of great importance for sustainable chemical processes. Here, we develop an in situ self-assembly strategy to decorate Cu-based metal-organic framework (MOF) Cu-BDC-NH2 nanocrystals on Cu2O octahedra to construct a series of Cu2O@Cu-BDC-NH2 catalysts for selective oxidation of styrene. Using H2O2 as green oxidants, the optimized sample of Cu2O@Cu-BDC-NH2-8h could achieve 85% styrene conversion with 76% selectivity of benzaldehyde under a mild condition of 40 °C. The high performance of the as-prepared heterogeneous catalysts was attributed to the well-designed Cu+/Cu2+ interface between Cu2O and Cu-BDC-NH2 as well as the porous MOF shells composed of the uniformly dispersed Cu-BDC-NH2 nanocrystals. The alkaline properties of Cu2O and the –NH2 modification of MOFs enable the reaction to be carried out in a base-free condition, which simplifies the separation process and makes the catalytic system more environmentally friendly. Besides the Cu2O octahedra (od-Cu2O), the Cu2O cuboctahedrons (cod-Cu2O) were synthesized by adjusting the added polyvinyl pyrrolidone, and the obtained cod-Cu2O@Cu-BDC-NH2 composite also showed good catalytic performance. This work provides a useful strategy for developing highly efficient and environmentally benign heterogeneous catalysts for the selective oxidation of styrene.

Diffusive Formation of Hollow Mesoporous Silica Shells from Core-Shell Composites: Insights from the Hydrogen Sulfide Capture Cycle of CuO@mSiO2 Nanoparticles

Mesoporous silica is often employed as a coating material in core-shell nanoparticles to decrease the possibility of sintering or aggregation of the core particles. In this work, we discovered a surprising morphological transformation during the sulfidation and regeneration (oxidation) of core-shell CuO@mSiO₂ materials designed for H₂S capture. Although CuS cores were still encapsulated within the silica shells after in situ sulfidation, hollow silica shells formed during the regeneration step as CuO leached out of the shell and aggregated into larger particles. The successful sulfidation of pristine CuO@mSiO₂ was facilitated by the restraining effect of silica shells on lattice growth from CuO into CuS, and the mesopores allowed for volume expansion. The phase and morphology changes during the regeneration (oxidation) process leading to the hollow shells were investigated by X-ray diffraction and transmission electron microscopy. It was observed that the cores remained encaged during the disproportionation of CuS to Cu₂S, which is the first step in the oxidation of CuS. However, voids were generated when Cu₂S was oxidized and reacted with water generated from the condensation of silica. A possible mechanism for this transformation involves the outward diffusion of copper ions through the mesoporous silica, leading to the migration of core particles. This migration was further accelerated by the elevated temperature in the regeneration process and promoted by the formation of the copper sulfate hydroxide through the reaction with water. This work provides key insights into the chemical stability of such core-shell structures under the influence of diffusion-driven structural transformations.

Catalytic epoxidation of olefins in liquid phase over manganese based magnetic nanoparticles

Epoxidation of olefins stands out as a crucial class of reactions and is of great interest in academic research and industry due to the production of various important fine chemicals and intermediates. Manganese complexes have the potential to catalyze the epoxidation of olefins with high efficiency. Magnetic nanocatalysts have attracted significant attention for immobilizing homogeneous transition metal complexes. Easy separation by external magnetic fields, nontoxicity, and a core shell structure are the main advantages of magnetic nanocatalysts over other heterogeneous catalysts. The method of functionalizing magnetic nanoparticles and of anchoring homogeneous metal complexes has significant effects on catalytic performance. Therefore, a critical review of recent research progress on manganese complexes' immobilization on magnetic nanoparticles for liquid phase olefin epoxidation is necessary. In this work, magnetic nanoparticles are categorized according to their preparation procedures and structures. The physical/chemical properties, catalytic performance for olefin epoxidation, reusability and plausible reaction mechanisms will be discussed, in an attempt to unravel the structure-function relationship and to guide the future study of MNPs' design for olefin epoxidations.

Iron nanostructured catalysts: design and applications

This review is focused on the recent advances in the design of iron nanostructures and their catalytic applications.

Biogenic synthesis of copper oxide nanoparticles using olea europaea leaf extract and evaluation of their toxicity activities: An in vivo and in vitro study

Copper oxide nanoparticles (CUNPs) were synthesized using Olea europaea leaf extract as reducing and protecting agent. The formation of nanoparticles was observed through a color change from yellowish to brownish black. The CUNPs were confirmed with UV-Vis spectrophotometer, which revealed a peak absorbance at 289 nm. The synthesized CUNPs were characterized by XRD, FTIR, SEM, and TEM. The XRD pattern revealed that CUNPs were crystalline in nature with a diameter around 20 nm. FTIR spectral analysis showed that CUNPs were capped with plant constituents. From SEM and TEM analyses, the CUNPs were generally found to be spherical in shape, and the size range was 20-50 nm. Free radical scavenging potential of CUNPs against DPPH was confirmed by its stable antioxidant effects. In addition, the toxicity of CUNPs in mice was also assessed by body weight and weights of liver, kidneys, spleen, and thymus. The immune response in mice was signaled through an obvious change in spleen and thymus index, with a decrease of ADA enzyme activity in serum, spleen, and thymus after CUNPs treatment. The CUNPs were found to exert cell growth arrest against AMJ-13 and SKOV-3 cancer cells in a dose-dependent manner and induce cell death by apoptosis. Less significant cytotoxic effect was observed in normal dermal fibroblast cells. These findings suggest that CUNPs may have the potential to be anticancer agents. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 34:218-230, 2018.

NiO promoted CuO–NiO/SBA-15 composites as highly active catalysts for epoxidation of olefins

NiO promoted dispersion of CuO in the CuO–NiO/SBA-15 composites, which showed high activity for olefin epoxidation.

Synthesis of a BiFeO3 nanowire-reduced graphene oxide based magnetically separable nanocatalyst and its versatile catalytic activity towards multiple organic reactions

Herein, we report for the first time synthesis of a BiFeO₃ nanowire-reduced graphene oxide nanocatalyst (BFO–RGO) using a hydrothermal method.

Effect of solvent ratio and counter ions on the morphology of copper nanoparticles and their catalytic application in β-enaminone synthesis

This work reports the synthesis of shape selective copper nanoparticles (NPs) using a microwave irradiation method, using diverse ratios of an ethylene glycol (EG)/water system and their catalytic application in β-enaminones synthesis.