Triclosan detoxification through dechlorination and oxidation via microbial Pd-NPs under aerobic conditions

The present study focuses on the successful preparation of microbial palladium nanoparticles (Pd-NPs). The even distribution of Pd in the periplasmic space of B. megaterium Y-4 cells is characterized using a transmission electronic microscopy (TEM) and scanning electron microscope (SEM). X-Ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) revealed the domination of Pd (0) in Pd-NPs. The microbial Pd-NPs were selected to detoxify triclosan (TCS). Liquid chromatography-mass spectrometry (LC-MS) was used to analyze the intermediate products of dechlorination and oxidization. Free radicals quenching and 5,5-dimethyl-1-pyrroline N-oxide (DMPO) capturing experiments confirmed the crucial contribution of atomic H• and O₂^·- to TCS degradation. Besides, TCS degradation by microbial Pd-NPs could alleviate the cytotoxicity of TCS polluted water. Meanwhile, great circulating utilization of microbial Pd-NPs was obtained in degrading TCS. Corresponding findings in the present study could provide new insight into the role of microbial Pd-NPs in detoxifying pollutants.

Intensifying strategy of ionic liquids for Pd-based catalysts in anthraquinone hydrogenation

Pd–IL complex catalyst was first employed in anthraquinone hydrogenation. ILs are uniformly dispersed around Pd species, which adjust acidic sites, accomplish charge transfers, stretch CO bond lengths and promote occurrence of desirable reactions.

Reactivity of Ionic Liquids: Reductive Effect of [C4 C1 im]BF4 to Form Particles of Red Amorphous Selenium and Bi2 Se3 from Oxide Precursors

Temperature-induced change in reactivity of the frequently used ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate ([C4 C1 im]BF4 ) is presented as a prerequisite for the rational screening of reaction courses in material synthesis. [C4 C1 im]BF4 becomes active with oxidic precursor compounds in reduction reaction at ϑ≥200 °C, even without the addition of an external reducing agent. The reaction mechanism of forming red amorphous selenium from SeO2 is investigated as a model system and can be described similarly to the Riley oxidation. The reactive species but-1-ene, which is formed during the decomposition of [C4 C1 im]BF4 , reacts with SeO2 and form but-3-en-2-one, water, and selenium. Elucidation of the mechanism was achieved by thermoanalytical investigations. The monotropic phase transition of selenium was analyzed by the differential scanning calorimetry. Beyond, the suitability of the single source oxide precursor Bi2 Se3 O9 for the synthesis of Bi2 Se3 particles was confirmed. Identification, characterization of formed solids succeeded by using light microscopy, XRD, SEM, and EDX.

Efficient carbon dioxide hydrogenation to formic acid with buffering ionic liquids

The efficient transformation of CO₂ into chemicals and fuels is a key challenge for the decarbonisation of the synthetic production chain. Formic acid (FA) represents the first product of CO₂ hydrogenation and can be a precursor of higher added value products or employed as a hydrogen storage vector. Bases are typically required to overcome thermodynamic barriers in the synthesis of FA, generating waste and requiring post-processing of the formate salts. The employment of buffers can overcome these limitations, but their catalytic performance has so far been modest. Here, we present a methodology utilising IL as buffers to catalytically transform CO₂ into FA with very high efficiency and comparable performance to the base-assisted systems. The combination of multifunctional basic ionic liquids and catalyst design enables the synthesis of FA with very high catalytic efficiency in TONs of >8*10⁵ and TOFs > 2.1*10⁴ h⁻¹.

Basic ionic liquids provide a buffering effect that enables the efficient synthesis of free formic acid from CO₂ hydrogenation. Here, a highly efficient catalytic system that transforms CO₂ to formic acid without the need of strong bases is demonstrated, avoiding the formation of formate salts.

Highly efficient aqueous phase reduction of nitroarenes catalyzed by phosphine-decorated polymer immobilized ionic liquid stabilized PdNPs

Phosphino-decorated polymer immobilised ionic liquid-stabilised PdNPs are highly efficient catalysts for the aqueous phase hydrogenation and transfer hydrogenation of aromatic nitro compounds in batch and continuous flow.

Ru-Catalyzed Estragole Isomerization under Homogeneous and Ionic Liquid Biphasic Conditions

The isomerization of estragole to trans-anethole is an important reaction and is industrially performed using an excess of NaOH or KOH in ethanol at high temperatures with very low selectivity. Simple Ru-based transition-metal complexes, under homogeneous, ionic liquid (IL)-supported (biphasic) and "solventless" conditions, can be used for this reaction. The selectivity of this reaction is more sensitive to the solvent/support used than the ligands associated with the metal catalyst. Thus, under the optimized reaction conditions, 100% conversion can be achieved in the estragole isomerization, using as little as 4 × 10^-3 mol % (40 ppm) of [RuHCl(CO)(PPh₃)₃] in toluene, reflecting a total turnover number (TON) of 25 000 and turnover frequencies (TOFs) of up to 500 min^-1 at 80 °C. Using a dimeric Ru precursor, [RuCl(μ-Cl)(η³:η³-C₁₀H₁₆)]₂, in ethanol associated with P(OEt)₃, a TON of 10 000 and a TOF of 125 min^-1 are obtained with 100% conversion and 99% selectivity. These two Ru catalytic systems can be transposed to biphasic IL systems by using ionic-tagged P-ligands such as 1-(3-(diphenylphosphanyl)propyl)-2,3-dimethylimidazolium bis(trifluoromethanesulfonyl)imide immobilized in 1-(3-hydroxypropyl)-2,3-dimethylimidazolium bis(trifluoromethanesulfonyl) imide with up to 99% selectivity and almost complete estragole conversion. However, the reaction is much slower than that performed under solventless or homogeneous conditions. The use of ionic-tagged ligands significantly reduces the Ru leaching to the organic phase, compared to that in reactions performed under homogeneous conditions, where the catalytic system loses catalytic performance after the second recycling. Detailed kinetic investigations of the reaction catalyzed by [RuHCl(CO)(PPh₃)₃] indicate that a simplified kinetic model (a monomolecular reversible first-order reaction) is adequate for fitting the homogeneous reaction at 80 °C and under biphasic conditions. However, the kinetics of the reaction are better described if all of the elementary steps are taken into consideration, especially at 40 °C.

Advances in the preparation of highly selective nanocatalysts for the semi-hydrogenation of alkynes using colloidal approaches

The present review describes the contributions and perspectives in the field of the selective hydrogenation of alkynes involving the utilization of colloidal methodologies.

Ionic-Liquid-Modified Hybrid Materials Prepared by Physical Vapor Codeposition: Cobalt and Cobalt Oxide Nanoparticles in [C1C2Im][OTf] Monitored by In Situ IR Spectroscopy

The synthesis of ionic-liquid-modified nanomaterials has attracted much attention recently. In this study we explore the potential to prepare such systems in an ultraclean fashion by physical vapor codeposition (PVCD). We codeposit metallic cobalt and the room-temperature ionic liquid (IL) 1-ethyl-3-methylimidazolium trifluoromethanesulfonate [C1C2Im][OTf] simultaneously onto a Pd(111) surface at 100 K. This process is performed under ultrahigh-vacuum (UHV) conditions in the presence of CO, or in the presence of O2 and CO. We use time-resolved (TR) and temperature-programmed (TP) infrared reflection absorption spectroscopy (IRAS) to investigate the formation and stability of the IL-modified Co deposits in situ during the PVD-based synthesis. CO is used as a probe molecule to monitor the growth. After initial growth of flat Co films on Pd(111), multilayers of Co nanoparticles (NPs) are formed. Characteristic shifts and intensity changes are observed in the vibrational bands of both CO and the IL, which originate from the electric field at the IL/Co interface (Stark effect) and from specific adsorption of the [OTf](-) anion. These observations indicate that the Co aggregates are stabilized by mixed adsorbate shells consisting of CO and [OTf](-). The CO coverage on the Co particle decreases with increasing temperature, but some CO is preserved up to the desorption temperature of the IL (370 K). Further, the IL shell suppresses the oxidation of the Co NPs if oxygen is introduced in the PVCD process. Only chemisorbed oxygen is formed at oxygen partial pressures that swiftly lead to formation of Co3O4 in the absence of the IL (5 × 10(-6) mbar O2). This chemisorbed oxygen is found to destabilize the CO ligand shell. The oxidation of Co is not suppressed if IL and Co are deposited sequentially under otherwise identical conditions. In this case we observe the formation of fully oxidized cobalt oxide particles.