Biosynthesis of AgNPs onto the urea-based periodic mesoporous organosilica (AgxNPs/Ur-PMO) for antibacterial and cell viability assay

Nano-size silver particles were stabilized on the inner surfaces of urea based periodic mesoporous organosilica (Ur-PMO). Aqueous extract of Euphorbia leaves as a sustainable and green reducing agent was applied for Ag-nanoparticles growth into the Ur-PMO channels. Physical and chemical properties of organosilica materials synthesized using various techniques such as FT-IR, small-angle XRD, PXRD, FESEM, TEM, SEM-EDX and atomic absorption spectrometry (AAS) were examined. Finally, the AgNPs/Ur-PMO were investigated on cell viability assay. An in vitro cytotoxicity test using MMT assay displayed that the designed material has good biocompatibility and could be a promising candidate for biomedical applications. The results also showed that the AgNPs/Ur-PMO compounds (especially, PMO; 1.27% AgNPs) had relatively good antibacterial and antibiofilm effects. It seems that the use of these compounds in hospital environments can reduce nosocomial infections as well as reduce antibiotic-resistant bacteria.

Simulation of the Light Transmittance in Macroporous Silica

This paper focuses on the light transmittance of macroporous silica as a photocatalyst carrier. In addition to the characteristics of photocatalysts, the structure of porous bulk is also important since it affects the propagation of light. Realistic porous structures are generated by a Voronoi-based approach. Four morphological parameters are highly controlled during generating, that is, porosity, coefficient of variation, diameter ratio and normalized curvature. Finite element method (FEM) is used to simulate the propagation of light in the porous models in the visible light range. The intensity shows a quadratic decrease with the increase of the depth of light propagation. The influences of the morphological parameters on the light transmittance are analysed. It turns out that the porosity has a great influence on the light transmittance while the coefficient of variation and the diameter ratio have small ones. Moreover, the influence of the normalized curvature is little. Besides, the effect of the wavelength of visible light can not be ignored. With the simulation, the depth of visible light entering the porous silica can be estimated, which is challenging to access experimentally.

Facile and Direct Preparation of Ultrastable Mesoporous Silica with Silver Nanoclusters: High Surface Area

We report the successful direct synthesis of an ultrastable mesoporous silicon dioxide framework containing silver nanoclusters using a modified true liquid crystal templating method. Our modification produced an extraordinary material with a high average Brunauer-Emmett-Teller specific surface area of 1785 m2 g-1 - the highest reported surface area to date - and an ultrastable mesoporous structure, which has been stable for nine years so far. This method eliminates the need for reduction of silver oxide into metallic silver and restricts the growth of silver clusters. The silver nanoclusters, with an average size of 1 nm, occupy the pores and walls of the framework. Analysis of the material using nitrogen adsorption/desorption method, high-resolution transmission electron microscopy, X-ray diffractometry, energy-dispersive X-ray diffractometry, X-ray photoelectron spectroscopy, and scanning electron microscopy is discussed herein.

Green Silver Nanoparticles Confined in Monolithic Silica Disk-packed Spin Column for Human Serum Albumin Preconcentration

Background:

In recent times many new uses have been found for nanomaterials that have undergone homogenous immobilization within porous supports. For this paper, immobilization of SNPs on a thiol-functionalized silica monolith using a fast, easy, environmentally friendly and costeffective process was performed. This was achieved by modifying the surface of a silica-based monolith using thiol groups, and then we fabricated green SNPs in situ, reducing an inorganic precursor silver nitrate solution (AgNO3) by employing tangerine peel extract as a reducing reagent, with Ag-thiol bonds forming along the monument. Doing this allows monoliths to be prepared in such a way that, as TEM analysis demonstrated, SNPs are evenly distributed along the rod's length. Once the materials had been fabricated, they were employed as a sorbent by being placed in a centrifuge. The SNP-thiol functionalized silica monolith was then tested using a standard protein (HSA).

Methods:

The process involves creating monolithic materials by employing a two-part sol-gel technique before modifying the surface of the silica-based monolith using thiol groups for hosting purposes. Homogenous surface coverage was achieved through the use of a non-toxic "green" reducing reagent (tangerine peel extract) to reduce a silver nitrate solution in place to create SNPs joined to the pore surface of a thiol-functionalized silica monolith, employing bonds of Ag-thiol. Once these materials were synthesized, they were classified by utilizing a number of methods based on SEM coupled with EDAX, TEM, AFM and BET analysis. The silica-based monolith, embedded with constructed SNPs, was employed as a sorbent in the preconcentration of human serum albumin (HSA).

Results:

The performance of the fabricated materials was measured against a silica-based monolith with no SNPs. Also, a silica monolith with constructed SNPs embedded was employed to capture HSA within a sample of human urine mixed with a double detergent concentrate (SDS). Such a monolith containing functionalized SNPs can be a highly effective sorbent for preconcentration of proteins in complex samples.

Conclusion:

It was shown to have superior performance compared to a bare silica-based monolith. Additionally, it was shown that a monolithic column modified by SNPs could preconcentrate spiked HSA in urine samples.

Biosensor Applications of Electrodeposited Nanostructures

The development of biosensors for a range of analytes from small molecules to proteins to oligonucleotides is an intensely active field. Detection methods based on electrochemistry or on localized surface plasmon responses have advanced through using nanostructured electrodes prepared by electrodeposition, which is capable of preparing a wide range of different structures. Supported nanoparticles can be prepared by electrodeposition through applying fixed potentials, cycling potentials, and fixed current methods. Nanoparticle sizes, shapes, and surface densities can be controlled, and regular structures can be prepared by electrodeposition through templates. The incorporation of multiple nanomaterials into composite films can take advantage of the superior and potentially synergistic properties of each component. Nanostructured electrodes can provide supports for enzymes, antibodies, or oligonucleotides for creating sensors against many targets in areas such as genomic analysis, the detection of protein antigens, or the detection of small molecule metabolites. Detection can also be performed using electrochemical methods, and the nanostructured electrodes can greatly enhance electrochemical responses by carefully designed schemes. Biosensors based on electrodeposited nanostructures can contribute to the advancement of many goals in bioanalytical and clinical chemistry.

Excellent porous environmental nanocatalyst: tactically integrating size-confined highly active MnOx in nanospaces of mesopores enables the promotive catalytic degradation efficiency of organic contaminants

A nanoporous molecular sieve catalyst containing size-confined MnO_x species, which affords excellent environmental catalytic efficiency, was synthesized using a micelle-assisted in situ embedding strategy.

Silver nanoparticles-coated monolithic column for in-tube solid-phase microextraction of monounsaturated fatty acid methyl esters

Based on our developed sodium hyaluronate-functionalized urea-formaldehyde (HA-UF) monolith, a silver nanoparticles-coated monolithic column has been fabricated via the interaction between silver nanoparticles (Ag NPs) and HA. The successful coating of Ag NPs on the parent monolith was proven by SEM, EDAX, UV-vis spectrum and XPS. Nitrogen adsorption desorption isotherms and Barret-Joyner-Halenda (BJH) pore size distributions of the parent and resultant monolith were also performed. Due to the Ag⁺-like affinity interaction caused by the contact of unsaturated compounds and Ag NPs, the Ag NPs-coated monolith showed satisfactory extraction efficiency towards these compounds, and was applied for in-tube solid-phase microextraction (SPME) of monounsaturated fatty acid methyl esters (MUFAMEs). Several factors for in-tube SPME, such as ACN percentage in the sampling solution, elution volume, sampling and elution flow rate, were investigated with respect to the extraction efficiency of model MUFAMEs. Under the optimized SPME conditions, a simple in tube SPME-Ag⁺-HPLC method for detection of model MUFAMEs has been proposed, the limits of detection (LODs) were less than 5.2 μg/kg, and the recoveries of spiked French fry samples were ranged from 86.6% to 96.1% with relative standard deviations (RSDs) less than 5.2%. This study provided an Ag NPs-coated monolith with good reproducibility and repeatable extraction performance, and developed an efficient method for in-tube SPME of MUFAMEs in practical food samples.

Low-Temperature Continuous-Flow Dehydration of Xylose Over Water-Tolerant Niobia-Titania Heterogeneous Catalysts

The sustainable conversion of vegetable biomass-derived feeds to useful chemicals requires innovative routes meeting environmental and economical criteria. The approach herein pursued is the synthesis of water-tolerant, unconventional solid acid monolithic catalysts based on a mixed niobia-titania skeleton building up a hierarchical open-cell network of meso- and macropores, and tailored for use under continuous-flow conditions. The materials were characterized by spectroscopic, microscopy, and diffraction techniques, showing a reproducible isotropic structure and an increasing Lewis/Brønsted acid sites ratio with increasing Nb content. The catalytic dehydration reaction of xylose to furfural was investigated as a representative application. The efficiency of the catalyst was found to be dramatically affected by the niobia content in the titania lattice. The presence of as low as 2 wt % niobium resulted in the highest furfural yield at 140 °C under continuous-flow conditions, by using H₂ O/γ-valerolactone as a safe monophasic solvent system. The interception of a transient 2,5-anhydroxylose species suggested the dehydration process occurs via a cyclic intermediates mechanism. The catalytic activity and the formation of the anhydro intermediate were related to the Lewis acid sites (LAS)/Brønsted acid sites (BAS) ratio and indicated a significant contribution of xylose-xylulose isomerization. No significant catalyst deactivation was observed over 4 days usage.

Surface functionality density regulated in situ reduction of nanosilver on hierarchial wrinkled mesoporous silica nanoparticles and their antibacterial activity

Hierarchical wrinkled mesoporous silica nanoparticles (WMS NPs) bedecked with diverse functionality density of amino groups (WMSs-N2, WMSs-NN and WMSs-NNN) were first synthesized via typical Sol–Gel method, and then utilized for the in situ reduction of nanosilver with sodium borohydride. Elegantly distributed Ag NPs (ca. 7–10 nm, 3–5 nm) on WMSs-N2 and WMSs-NN without any agglomeration were obtained respectively, while Ag NPs (ca. 50 nm) dispersed on WMSs-NNN were obviously larger and slightly agglomerated. Compared to pure Ag NPs, all the obtained Ag@WMSs composites were durable and displayed much better antibacterial performance, with a minimal inhibitory concentration of 12–80 mg L⁻¹ and a minimal bactericidal concentration of 24–108 mg L⁻¹, respectively. Moreover, it was found that the functionality density of amino groups and the specific surface area of WMSs played a crucial role for the antibacterial performance of the obtained nanocomposites. Because WMSs-NN had higher specific surface area and surface amino density than WMSs-N2, the size and dispersion of Ag NPs on WMSs-NN were smaller and superior to those of Ag NPs on WMSs-N2, respectively. Accordingly, Ag@WMSs-NN displayed a better antibacterial capacity than Ag@WMSs-N2. As for Ag@WMSs-NNN, owing to the high loading content of Ag NPs, they exhibited the best antibacterial and bactericidal properties.

Nanosilver with diverse particle size was attached onto hierarchical WMS, and the resulted samples showed excellent antibacterial properties.

Phototherapeutic spectrum expansion through synergistic effect of mesoporous silica trio-nanohybrids against antibiotic-resistant gram-negative bacterium

The extensive impact of antibiotic resistance has led to the exploration of new anti-bacterial modalities. We designed copper impregnated mesoporous silica nanoparticles (Cu-MSN) with immobilizing silver nanoparticles (SNPs) to apply photodynamic inactivation (PDI) of antibiotic-resistant E. coli. SNPs were decorated over the Cu-MSN surfaces by coordination of silver ions on diamine-functionalized Cu-MSN and further reduced to silver nanoparticles with formalin. We demonstrate that silver is capable of sensitizing the gram-negative bacteria E. coli to a gram-positive specific phototherapeutic agent in vitro; thereby expanding curcumin's phototherapeutic spectrum. The mesoporous structure of Cu-MSN remains intact after the exterior decoration with silver nanoparticles and subsequent curcumin loading through an enhanced effect from copper metal-curcumin affinity interaction. The synthesis, as well as successful assembly of the functional nanomaterials, was confirmed by various physical characterization techniques. Curcumin is capable of producing high amounts of reactive oxygen species (ROS) under light irradiation, which can further improve the silver ion release kinetics for antibacterial activity. In addition, the positive charged modified surfaces of Cu-MSN facilitate antimicrobial response through electrostatic attractions towards negatively charged bacterial cell membranes. The antibacterial action of the synthesized nanocomposites can be activated through a synergistic mechanism of energy transfer of the absorbed light from SNP to curcumin.

Immobilization of Highly Dispersed Ag Nanoparticles on Carbon Nanotubes Using Electron-Assisted Reduction for Antibacterial Performance

Silver nanoparticles (Ag NPs) supported on certain materials have been widely used as disinfectants. Yet, to date, the antibacterial activity of the supported Ag NPs is still far below optimum. This is mainly associated with the easy aggregation of Ag NPs on the supporting materials. Herein, an electron-assisted reduction (EAR) method, which is operated at temperatures as low as room temperature and without using any reduction reagent, was employed for immobilizing highly dispersed Ag NPs on aminated-CNTs (Ag/A-CNTs). The average Ag NPs size on the EAR-prepared Ag/A-CNTs is only 3.8 nm, which is much smaller than that on the Ag/A-CNTs fabricated from the traditional thermal calcination (25.5 nm). Compared with Ag/A-CNTs fabricated from traditional thermal calcination, EAR-prepared Ag/A-CNTs shows a much better antibacterial activity to E. coli/S. aureus and antifouling performance to P. subcordiformis/T. lepidoptera. This is mainly originated from the significantly enhanced Ag(+) ion releasing rate and highly dispersed Ag NPs with small size on the EAR-prepared Ag/A-CNTs. The findings from the present work are helpful for fabricating supported Ag NPs with small size and high dispersion for efficient antibacterial process.

Aminosilane decorated carbon template-induced in situ encapsulation of multiple-Ag-cores inside mesoporous hollow silica

A cores@shell structure of microreactor with a well-dispersed active phase of multiple free-Ag-cores, hollow cavity and protective mesoporous shell was prepared by a simple and novel construction approach.

Template-induced in situ dispersion of enhanced basic-sites on sponge-like mesoporous silica and its improved catalytic property

Well-dispersed and enhanced CaO solid base were directly formed on sponge-like mesoporous silica, improved activity occurred at a lower reaction temperature.

A metal-assisted templating route (S0M+I−) for fabricating thin-layer CoO covered on the channel of nanospherical-HMS with improved catalytic properties

Nanospherical hexagonal mesoporous silica (HMS) with a functional mesochannel covered with thin-layer-dispersed cobalt oxide species was directly fabricatedviaa novel metal-assisted templating method (S⁰M⁺I⁻).

Preparation of silver nanoparticles embedded hierarchically porous AlPO4 monoliths

Silver nanoparticles were homogenously embedded on the skeletons of hierarchically porous AlPO₄ by immersing the monoliths in a silver colloid.