Heterogeneous Structures Consisting of Rod-like ZnO Interspersed with Ce2S3 Nanoparticles for Photo-Sensitive Supercapacitors with Enhanced Capacitive Performance

Photosensitive supercapacitors incorporate light-sensitive materials on capacitive electrodes, enabling solar energy conversion and storage in one device. In this study, heterogeneous structures of rod-shaped ZnO decorated with Ce2S3 nanoparticles on nickel foam (ZnO@Ce2S3/NF) are synthesized using a two-step hydrothermal method as photosensitive supercapacitor electrodes for capacitance enhancement under visible light. The formation of ZnO@Ce2S3 heterogeneous structures is confirmed using various structural characterization techniques. The area-specific capacitance of the ZnO@Ce2S3/NF composite electrode increased from 1738.1 to 1844.0 mF cm-2 after illumination under a current density of 5 mA cm-2, which is 2.4 and 2.8 times higher than that of ZnO and Ce2S3 electrodes under similar conditions, respectively, indicating the remarkable light-induced capacitance enhancement performance. The ZnO@Ce2S3/NF electrode also exhibits a higher photocurrent and photovoltage than the two single electrodes, demonstrating its excellent photosensitivity. The improved capacitance performance and photosensitivity under illumination are attributed to the well-constructed energy-level structure, which stimulates the flow of photogenerated electrons from the outer circuit and the involvement of photogenerated holes in the resulting surface-controlled capacitance. In addition, the assembled ZnO@Ce2S3/NF-based hybrid supercapacitor exhibits a great energy density of 145.0 mWh cm-2 under illumination. This study provides a novel strategy for the development of high-performance solar energy conversion/storage devices.

One-Pot Facile Synthesis of a Cluster of ZnS Low-Dimensional Nanoparticles for High-Performance Supercapacitor Electrodes

To maximize the use of ZnS low-dimensional nanoparticles as high-performance supercapacitor electrodes, this work describes a simple one-pot synthesis method for producing a cluster of these particles. The ZnS nanoparticles fabricated in this work exhibit a cluster with unique low-dimensional (0D, 1D, and 2D) characteristics. Structural, morphological, and electrochemical investigations are all part of the thorough characterization of the produced materials. An X-ray diffraction pattern of clustered ZnS nanoparticles reflects the phase formation with highly stable cubic blende sphalerite polymorph. The confirmation of nanoparticle cluster formation featuring multiple low-dimensional nanostructures was achieved through field emission scanning electron microscopy (FE-SEM), while the internal structure was assessed using transmission electron microscopy (TEM). Systematically assessing the ZnS nanoparticles' electrochemical performance reveals their prospective qualities as supercapacitor electrode materials. The electrode assembled with this material on Ni foam demonstrates elevated specific capacitance (areal capacitance) values, reaching 716.8 F.g⁻1 (2150.4 mF.cm-2) at a current density of 3 mA.cm⁻2. Moreover, it reflects 69.1% capacitance retention with a four times increase in current density, i.e., 495.5 F.g-1 (1486.56 mF.cm-2) capacitance was archived at 12 mA.cm-2 with 100% Coulombic efficiency. Furthermore, the electrode exhibits prolonged cycling capability with 77.7% capacitance retention, as evidenced by its charge-discharge measurements sustained over 15,000 cycles at a current density of 25 mA cm⁻2.

Synthesis of Zinc Oxide Nanorods from Zinc Borate Precursor and Characterization of Supercapacitor Properties

The synthesis of zinc oxide (ZnO) was accomplished from zinc borate (Zn3B2O6) minerals to be used as electrodes in supercapacitor applications. The concentrations of obtained zinc (Zn) metal after treatment with hydrochloric acid (HCl) were determined by atomic absorption spectroscopy (AAS). Direct synthesis of ZnO on a nickel (Ni) foam surface was conducted by employing the hydrothermal technique using a solution with the highest Zn content. The results showed the successful synthesis of ZnO nanorods on the surface of Ni foam with an average wall size of approximately 358 nm. Cyclic voltammetry (CV) and galvanostatic charge-discharge (GCD) measurements revealed that the synthesized electrode exhibited battery-type charge storage characteristics, reaching a maximum specific capacitance of approximately 867 mF·cm-² at a current density of 2 mA·cm-². Additionally, the energy and power densities of the electrode at a current density of 2 mA·cm-² were calculated as 19.3 mWh·cm-² and 200 mW·cm-², respectively. These results exhibited promising performance of the single-component electrode, outperforming the existing counterparts reported in the literature.

Binder-Free Porous 3D-ZnO Hexagonal-Cubes for Electrochemical Energy Storage Applications

Considerable efforts are underway to rationally design and synthesize novel electrode materials for high-performance supercapacitors (SCs). However, the creation of suitable materials with high capacitance remains a big challenge for energy storage devices. Herein, unique three-dimensional (3D) ZnO hexagonal cubes on carbon cloth (ZnO@CC) were synthesized by invoking a facile and economical hydrothermal method. The mesoporous ZnO@CC electrode, by virtue of its high surface area, offers rich electroactive sites for the fast diffusion of electrolyte ions, resulting in the enhancement of the SC’s performance. The ZnO@CC electrode demonstrated a high specific capacitance of 352.5 and 250 F g⁻¹ at 2 and 20 A g⁻¹, respectively. The ZnO@CC electrode revealed a decent stability of 84% over 5000 cycles at 20 A g⁻¹ and an outstanding rate-capability of 71% at a 10-fold high current density with respect to 2 A g⁻¹. Thus, the ZnO@CC electrode demonstrated improved electrochemical performance, signifying that ZnO as is promising candidate for SCs applications.

Origami and layered-shaped ZnNiFe-LDH synthesized on Cu(OH)2 nanorods array to enhance the energy storage capability

The combination of layered nanorod arrays with unique core-shell structure and transition metal layered double hydroxide (LDH) is considered as a feasible solution to improve the electrochemical performances of capacitor electrode. In this study, layered ZnNiFe-LDH@Cu(OH)₂/CF core-shell nanorod arrays, which consist of ultrathin ZnNiFe-LDHs nanosheet shells and ordered Cu(OH)₂ nanorod inner cores, are successfully designed and fabricated by a typical hydrothermal way and a simple in situ oxidation reaction. The electrode prepared using ZnNiFe-LDH@Cu(OH)₂/CF nanomaterial reveals an remarkable area capacitance of 6100 mF cm^-2 at 3 mA cm^-2 current density, which is excellently superior than those of ZnFe-LDH@Cu(OH)₂/CF, NiFe-LDH@Cu(OH)₂/CF, Cu(OH)₂/CF and CF. Additionally, the capacitance retention remains as high as 83.4% after 5000 cycles and a very small Rs (0.567 Ω) can be observed. In addition, an asymmetric supercapacitor device is successfully fabricated employing ZnNiFe-LDH@Cu(OH)₂/CF. Meanwhile, the ZnNiFe-LDH@Cu(OH)₂/CF//AC device can achieve an energy density of 44 Wh kg^-1 and a corresponding power density of 720 W kg^-1 and possess the capability to light up a multi-function monitor for 33 min just using two ASC equipments connected in series. Therefore, the prepared ZnNiFe-LDH@Cu(OH)₂/CF composite materials with unique structure has great application potential in energy storage devices.

Spectroscopic investigation of Cux Mg0.2-x Zn0.8 S (x = 0, 0.05, 0.10, 0.15) thin films for deep and dilute blue LED applications

The effect of copper (Cu) doping on the luminescent properties of the spray deposited Mg_0.2 Zn_0.8 S thin films were investigated for the first time. The Mg_0.2 Zn_0.8 S film is an excellent luminescent material with strong blue emissions. In the current investigation, we doped Mg_0.2 Zn_0.8 S with Cu by taking (Cu + Mg) as 20 at% by keeping other element ratios constant. Among the different samples in the series, Cu_0.05 Mg_0.15 Zn_0.8 S has shown promising results with dark blue emission. Also, these films showed good structural formation with lower or no other impurities, which is evident from the X-ray diffraction (XRD). Scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX) and atomic force microscopy (AFM) confirmed the improved material quality of Cu_0.05 Mg_0.15 Zn_0.8 S as compared to the pristine. Raman and X-ray photoelectron spectroscopy (XPS) studies have been carried out for the samples. Various defects induced in the films were investigated by recording the photoluminescence (PL) spectra and Cu:(Mg_0.2 Zn_0.8 S) films exhibited the capability to produce dilute blue luminescence by absorbing ultraviolet (UV) light. The Cu_0.05 Mg_0.15 Zn_0.8 S film showed promising material property, which is suitable for light-emitting diode (LED) applications.

Synthesis of zinc sulfide/copper sulfide/porous carbonized cotton nanocomposites for flexible supercapacitor and recyclable photocatalysis with high performance

The composite material composed of zinc sulfide, copper sulfide and porous carbon is prepared in this study, exhibiting excellent performances in the field of supercapacitor electrode and photocatalysts. In the degradation process of organic pollutants, zinc sulfide/copper sulfide with heterostructure effectively reduce the recombination rate of photo-generated electron-hole pairs. And the porous carbon substrate can not only accelerate the separation of photo-carriers but also provide numerous active sites. Furthermore, the sample can be easily separated after decomposing the organic pollutants. As a supercapacitor electrode, the combination of zinc sulfide/copper sulfide with large pseudo-capacitance and porous carbon material with excellent double-layercapacitance results in superior electrochemical performances. The composite electrode shows a high specific capacitance of 1925 mF cm^-2/0.53 mAh cm^-2 at 4 mA cm^-2. And the symmetric flexible supercapacitor based on the composite electrode achieves an outstanding energy density (0.39 Wh cm^-2 at the power density of 4.32 W cm^-2). Therefore, the zinc sulfide/copper sulfide/porous carbonized cotton nanocomposites (pCZCS) prepared herein exhibit dual functions of photocatalysts with high efficiency as well as energy storage materials with high energy density, which is interesting and important for expanding the practical applications in cross fields.

Ethylenediamine-assisted growth of multi-dimensional ZnS nanostructures and study of its charge transfer mechanism on supercapacitor electrode and photocatalytic performance

In recent years, much interest has been raised by materials with multi-purpose characteristics as the performance of electrochemical energy devices such as supercapacitors and photocatalytic activities depend strongly on the properties of materials. This study delineates various parameters like morphology, energy band gap, charge transfer resistance, different defect states, diffusion coefficient and functional groups adsorbed on the surface of material to assess the performance of supercapacitor electrodes and photocatalytic degradation efficiency of synthesised multi-dimensional ZnS nanostructures. Ethylenediamine (EN)-mediated multi-dimensional ZnS nanostructures were grown by the solvothermal route. One-dimensional (1D), 2D and 3D morphologies were obtained by varying the ratio of de-ionised water and EN, taken as 1:3, 1:2 and 1:1, respectively. The EN molecules effectively capped most of the surfaces of the ZnS nanoparticles formed, preventing agglomeration of nanoparticles due to the decrement in surface energy. The oriented attachment of these clusters resulted in the formation of 1D, 2D and 3D morphologies. The plausible chemistry in the formation of 1D, 2D and 3D nanostructures has been elaborated. Charge transfer properties of prepared electrodes have been examined using the electrochemical impedance spectroscopy (EIS) technique because better charge transfer causes diminishing electron/hole recombination and hence better photodegradation efficiency. Among the synthesised materials, the 2D nanostructure degraded the eosin Y dye to maximum 90.71% efficiency with rate constant 34 × 10^-3 min^-1. 2D nanostructures possess better charge transfer and hence better photodegradation efficiency. Various studies using methods of UV-vis, Fourier-transform infrared, Brunauer-Emmett-Teller, x-ray photoelectron spectroscopy and photoluminescence spectra are in good agreement with the obtained photodegradation results. After analysing cyclic voltammetry curves and EIS, a higher diffusion coefficient is obtained for 1D nanostructure material, hence a higher specific capacitance and higher energy density of 159.12 F g^-1 and 22.75 KWh kg^-1 are found in this case. Only 9% loss of specific capacitance is found after 1000 cycles, showing a relatively high cycling stability in 3D nanostructures. The excellent supercapacitive property can be attributed to the porous structure and high specific surface area. Thus, the synthesised multi-dimensional ZnS nanostructures are proved to be a potential candidate for both photocatalytic and supercapacitor electrode performance.

Formation of nickel-cobalt sulphide@graphene composites with enhanced electrochemical capacitive properties

Here, nickel-cobalt sulphide particles embedded in graphene layers (porous Ni-Co-S@G), were successfully prepared by one-step annealing of metallocene/metal-organic framework (MOF) hybrids involving simultaneous carbonization and sulfidation. Benefiting from the porous structure, highly conductive graphene layers and large loading of super-capacitive Ni-Co-S, the obtained Ni-Co-S@G composites exhibited excellent electrochemical performance with a specific capacitance of 1463 F g-1 at a current density of 1 A g-1. A flexible solid-state asymmetric supercapacitor (ASC), assembled with Ni-Co-S@G and active carbon, demonstrated a high energy density of 51.0 W h kg-1 at a power density of 650.3 W kg-1. It is noteworthy that the ASC offered robust flexibility and excellent performance that was maintained when the devices were bent at various angles. The results indicate that the as-prepared materials could potentially be applied in high-performance electrochemical capacitors.

Synthesis, optimization and applications of ZnO/polymer nanocomposites

Polymer composites have established an excellent position among the technologically essential materials because of their wide range of applications. An enormous research interest has been devoted to zinc oxide (ZnO) based polymer nanocomposites, due to their exceptional electrical, optical, thermal, mechanical, catalytic, and biomedical properties. This article provides a review of various polymer composites consisting of ZnO nanoparticles (NPs) as reinforcements, exhibiting excellent properties for applications such as the dielectric, sensing, piezoelectric, electromagnetic shielding, thermal conductivity and energy storage. The preparation methods of such composites including solution blending, in situ polymerization, and melt intercalation are also explained. The current challenges and potential applications of these composites are provided in order to guide future progress on the development of more promising materials. Finally, a detailed summary of the current trends in the field is presented to progressively show the future prospects for the development of ZnO containing polymer nanocomposite materials.

One-pot synthesis of ZnS nanowires/Cu7S4 nanoparticles/reduced graphene oxide nanocomposites for supercapacitor and photocatalysis applications

ZnS nanowires/Cu₇S₄ nanoparticles/rGO nanocomposites were fabricated as photocatalysts and supercapacitor electrodes for the first time.

Facile and inexpensive fabrication of zinc oxide based bio-surfaces for C-reactive protein detection

The paper reports a biosensor formed from antibody coated ZnO nano-crystals which has been prepared using a rapid and inexpensive fabrication method which utilises colloidal dispersion enhanced using sonication. This technique was used to prepare highly ordered and uniform nano-crystalline sensor surfaces on polyethylene terephthalate (PET) using 0.5%, 1% and 5% concentrations of zinc oxide nano-crystal suspensions. Impedance spectroscopy was employed to interrogate the sensor surfaces and confirmed high reproducibility of the fabrication process. Changes in impedance values, at a frequency of 138 Hz, were used to establish dose dependent responses for C-reactive protein (CRP) antigen. A limit of detection of less than 1 ng/ml was demonstrated for nano-surfaces fabricated from concentrations of 1% ZnO.

Fabrication and characterization of distinctive ZnO/ZnS core-shell structures on silicon substrates via a hydrothermal method

A distinctive novel ZnO/ZnS core–shell structure on silicon was reported in this study. Compared with previous studies, ZnO nanorods encapsulated by 5 nm ZnS nanograins were observed using a scanning electron microscope. Furthermore, strong (111) cubic ZnS crystalline structures were confirmed using high resolution transmission electron microscopy, selected area diffraction, and X-ray diffraction. The optical properties changed and the antibacterial behaviors were suppressed as the ZnS shells were attached onto the ZnO nanorods. Moreover, the results also indicate that the hydrophobicity could be enhanced as more ZnS nanograins were wrapped onto the ZnO nanorods. The ZnO/ZnS core–shell structures in this research show promise for use in future optoelectronic and biomedical applications.

A distinctive novel ZnO/ZnS core–shell structure on silicon was reported in this study.

Porous α-Fe₂O₃@C Nanowire Arrays as Flexible Supercapacitors Electrode Materials with Excellent Electrochemical Performances

Porous α-Fe₂O₃ nanowire arrays coated with a layer of carbon shell have been prepared by a simple hydrothermal route. The as-synthesized products show an excellent electrochemical performance with high specific capacitance and good cycling life after 9000 cycles. A solid state asymmetric supercapacitor (ASC) with a 2 V operation voltage window has been assembled by porous α-Fe₂O₃/C nanowire arrays as the anode materials, and MnO₂ nanosheets as the cathode materials, which gives rise to a maximum energy density of 30.625 Wh kg⁻¹and a maximum power density of 5000 W kg⁻¹ with an excellent cycling performance of 82% retention after 10,000 cycles.

Carbon nanospheres derived from Lablab purpureus for high performance supercapacitor electrodes: a green approach

Carbon nanospheres derived from a natural source using a green approach were reported. Lablab purpureus seeds were pyrolyzed at different temperatures to produce carbon nanospheres for supercapacitor electrode materials. The synthesized carbon nanospheres were analyzed using SEM, TEM, FTIR, TGA, Raman spectroscopy, BET and XRD. They were later fabricated into electrodes for cyclic voltammetry, galvanostatic charge/discharge and electrochemical impedance spectroscopy testing. The specific capacitances were found to be 300, 265 and 175 F g^-1 in 5 M KOH electrolyte for carbon nanospheres synthesized at 800, 700 and 500 °C, respectively. These are on a par with those of prior electrodes made of biologically derived carbon nanospheres but the cycle lives were remarkably higher than those of any previous efforts. The electrodes showed 94% capacitance retention even after 5200 charge/discharge cycles entailing excellent recycling durability. In addition, the practical symmetrical supercapacitor showed good electrochemical behaviour under a potential window up to 1.7 V. This brings us one step closer to fabricating a commercial green electrode which exhibits high performance for supercapacitors. This is also a waste to wealth approach based carbon material for cost effective supercapacitors with high performance for power storage devices.

Co3O4 nanowire@NiO nanosheet arrays for high performance asymmetric supercapacitors

Herein, we report a simple and facile sequential hydrothermal process for the synthesis of Co₃O₄ nanowire@NiO nanosheet arrays (CNAs).

ZnS coating for enhanced environmental stability and improved properties of ZnO thin films

Low environmental stability of ZnO nanostructures in hydrophilic systems is a crucial factor limiting their practical applications. ZnO nanomaterials need surface passivation with different water-insoluble compounds. This study describes a one-step passivation process of polycrystalline ZnO films with ZnS as a facile method of ZnO surface coating. A simple sulfidation reaction was carried out in gas-phase H₂S and it resulted in formation of a ZnS thin layer on the ZnO surface. The ZnS layer not only inhibited the ZnO dissolving process in water but additionally improved its mechanical and electrical properties. After the passivation process, ZnO/ZnS films remained stable in water for over seven days. The electrical conductivity of the ZnO films increased about 500-fold as a result of surface defect passivation and the removal of oxygen molecules which can trap free carriers. The nanohardness and Young's modulus of the samples increased about 64% and 14%, respectively after the ZnS coating formation. Nanowear tests performed using nanoindentation methods revealed reduced values of surface displacements for the ZnO/ZnS system. Moreover, both ZnO and ZnO/ZnS films showed antimicrobial properties against Escherichia coli.

ZnS coating improves mechanical, electrical, antibacterial properties and environmental stability of ZnO nanofilms.

Hierarchical Co3O4@Co9S8 nanowall structures assembled by many nanosheets for high performance asymmetric supercapacitors

Herein, we report hierarchical Co₃O₄@Co₉S₈ nanowalls assembled by many nanosheets. The as-synthesized products are characterized in detail using various characterization methods. They can be directly used as supercapacitor electrodes with excellent electrochemical performance due to the synergy effect between Co₃O₄ and Co₉S₈. Furthermore, a flexible asymmetric supercapacitor is fabricated by using the as-synthesized Co₃O₄@Co₉S₈ structures as the cathode and the active carbon as the anode, which reveals a specific capacitance of 266.6 mF cm⁻² at a current density of 4 mA cm⁻². In addition, the supercapacitor shows an excellent capacity retention rate of 86.5% after 10 000 cycles at a current density of 10 mA cm⁻². Finally, three supercapacitor devices connected in series can light a blue LED lamp for 5 min.

Herein, we report hierarchical Co₃O₄@Co₉S₈ nanowalls assembled by many nanosheets.

Morphology engineering of ZnO nanostructures for high performance supercapacitors: enhanced electrochemistry of ZnO nanocones compared to ZnO nanowires

In this work, the morphology of ZnO nanostructures is engineered to demonstrate enhanced supercapacitor characteristics of ZnO nanocones (NCs) compared to ZnO nanowires (NWs). ZnO NCs are obtained by chemically etching ZnO NWs. Electrochemical characteristics of ZnO NCs and NWs are extensively investigated to demonstrate morphology dependent capacitive performance of one dimensional ZnO nanostructures. Cyclic voltammetry measurements on these two kinds of electrodes in a three-electrode cell confirms that ZnO NCs exhibit a high specific capacitance of 378.5 F g^-1 at a scan rate of 20 mV s^-1, which is almost twice that of ZnO NWs (191.5 F g^-1). The charge-discharge and electrochemical impedance spectroscopy measurements also clearly result in enhanced capacitive performance of NCs as evidenced by higher specific capacitances and lower internal resistance. Asymmetric supercapacitors are fabricated using activated carbon (AC) as the negative electrode and ZnO NWs and NCs as positive electrodes. The ZnO NC⫽AC can deliver a maximum specific capacitance of 126 F g^-1 at a current density of 1.33 A g^-1 with an energy density of 25.2 W h kg^-1 at the power density of 896.44 W kg^-1. In contrast, ZnO NW⫽AC displays 63% of the capacitance obtained from the ZnO NC⫽AC supercapacitor. The enhanced performance of NCs is attributed to the higher surface area of ZnO nanostructures after the morphology is altered from NWs to NCs.

A Ni-P@NiCo LDH core–shell nanorod-decorated nickel foam with enhanced areal specific capacitance for high-performance supercapacitors

In this study, nickel phosphide (Ni-P) was combined with NiCo LDH via facile phosphorization of Ni foam and subsequent electrodeposition, forming core–shell nanorod arrays on Ni foam. The obtained Ni-P@NiCo LDH delivered excellent capacitive performance.

Experimental evidence of ZnS precursor anisotropy activated by ethylenediamine for constructing nanowires and single-atomic layered hybrid structures

Lateral view of a single-atomic layered ZnS(EN)_0.5 hybrid structure (left: BF-STEM image, right: schematic structure).

MOF-derived self-sacrificing route to hollow NiS2/ZnS nanospheres for high performance supercapacitors

NiS₂/ZnS hollow spherical nanocomposites have been successfully synthesized via a facile MOF-derived self-sacrificing route, which exhibit high capacitance as promising electrode materials for high-performance supercapacitors.

Facile synthesis of mesoporous hierarchical ZnS@β-Ni(OH)2 microspheres for flexible solid state hybrid supercapacitors

Mesoporous hierarchical ZnS@β-Ni(OH)₂ microspheres have been successfully synthesized via a facile route and exhibited good performance as electrode materials for supercapacitors.

Core-double shell ZnO/ZnS@Co3O4 heterostructure as high performance pseudocapacitor

ZnO/ZnS@Co₃O₄ pseudocapacitor with high specific capacitance and energy density.

Piezo-phototronic Effect Enhanced UV/Visible Photodetector Based on Fully Wide Band Gap Type-II ZnO/ZnS Core/Shell Nanowire Array

A high-performance broad band UV/visible photodetector has been successfully fabricated on a fully wide bandgap ZnO/ZnS type-II heterojunction core/shell nanowire array. The device can detect photons with energies significantly smaller (2.2 eV) than the band gap of ZnO (3.2 eV) and ZnS (3.7 eV), which is mainly attributed to spatially indirect type-II transition facilitated by the abrupt interface between the ZnO core and ZnS shell. The performance of the device was further enhanced through the piezo-phototronic effect induced lowering of the barrier height to allow charge carrier transport across the ZnO/ZnS interface, resulting in three orders of relative responsivity change measured at three different excitation wavelengths (385, 465, and 520 nm). This work demonstrates a prototype UV/visible photodetector based on the truly wide band gap semiconducting 3D core/shell nanowire array with enhanced performance through the piezo-phototronic effect.