Simultaneous determination of Co and Pb in P. polyphylla var. yunnanensis by ICP-OES after GO-TiO2-DES-based dispersive micro solid phase extraction

In this work, deep eutectic solvent (DES) was used to modify GO-TiO₂ to synthesize new adsorption material GO-TiO₂-DES nanocomposites. It was first used for dispersive micro solid phase extraction (DMSPE) and combined with inductively coupled plasma optical emission spectrometry (ICP-OES) for simultaneous determination of trace cobalt (Co) and lead (Pb) in natural medicine P. polyphylla var. yunnanensis. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscopy (FESEM), and the Brunauer-Emmett-Teller (BET) specific surface area were used to characterize. The results showed that GO-TiO₂-DES nanocomposites were successfully prepared and had better adsorption effect on metal ions. The factors affecting the extraction and elution of Co and Pb were optimized, including the type of DES, pH, adsorption time, amount of adsorbent, adsorption temperature, and elution time. Under the optimum conditions, the enhancement factors (EFs) of Co and Pb were 31 and 28, the limits of detection (LODs) were 0.11 and 0.24 μg L^-1, and the limits of quantification (LOQs) were 0.36 and 0.82 μg L^-1, respectively. The results of Co and Pb determined by the established method were in good agreement with those of inductively coupled plasma mass spectrometry (ICP-MS), which verified the accuracy and reliability of the method.

Structural Properties of Graphene Oxide Prepared from Graphite by Three Different Methods and the Effect on Removal of Cr(VI) from Aqueous Solution

Herein, three types of graphene oxides (GOs, GO-M1, GO-M2 and GO-M3) have been successfully prepared from graphite by three different methods and utilized for the removal of Cr(VI) from aqueous solutions. Further, the effects of initial concentration and pH, adsorbent dosage, contact time and temperature on the adsorption performance of GOs were investigated by batch adsorption experiments. Furthermore, the adsorption mechanisms for Cr(VI) adsorption by GOs are mainly the redox reaction and electrostatic attraction, while there are also pore filling, ion exchange and complexation involved in these adsorption processes. The adsorption kinetic and isotherm data indicate that these adsorption processes of GOs on Cr(VI) are dominantly monolayer chemisorption and equilibrium can be reached in 30 min. The saturation adsorption capacities (Qm, 298.15 K) of GO-M1, GO-M2 and GO-M3 for Cr(VI) are estimated to be 3.5412 mg⋅g-1, 2.3631 mg⋅g-1 and 7.0358 mg⋅g-1, respectively. Moreover, the adsorption thermodynamic study showed that these adsorption processes of Cr(VI) by the three types of GOs at 298.15 K to 323.15 K are endothermic, entropy-driven and thermodynamically spontaneous and feasible. Overall, these findings provided vital insights into the mechanism and application of Cr(VI) removal by GOs.

Graphene-based nanomaterials in the electroplating industry: A suitable choice for heavy metal removal from wastewater

The presence of various heavy metal ions in the industrial waste waters has recently been a challenging issue for human health. Since heavy metals are highly soluble in the aquatic environments and they can be absorbed easily by living organisms, their removal is essential from the environmental point of view. Many studies have been devoted to investigating the environmental behaviour of graphene-based nanomaterials as sorbent agents to remove metals from wastewaters arising by galvanic industries. Among the graphene derivates, especially graphene oxide (GO), due to its abundant oxygen functional groups, high specific area and hydrophilicity, is a high-efficient adsorbent for the removal of heavy and precious metals in aquatic environment. This paper reviews the main graphene, GO, functionalized GO and their composites and its applications in the metals removal process. The influencing factors, adsorption capacities and reuse capability are highlighted for the most extensively used heavy metals, including copper, zinc, nickel, chromium, cobalt and precious metals (i.e., gold, silver, platinum, palladium, rhodium, and ruthenium) in the electroplating process.

Hydroxypropyl-β-cyclodextrin-polyurethane/graphene oxide magnetic nanoconjugates as effective adsorbent for chromium and lead ions

In this work, hydroxypropyl-β-cyclodextrin-polyurethane magnetic nanoconjugates/reduced graphene oxide (HPMNPU/GO) supramolecules were prepared. The adsorbent was characterized using FTIR and SEM. The adsorbent was evaluated for its efficiency to remove Cr⁶⁺ and Pb²⁺ from aqueous solutions through batch adsorption studies following a Definitive Screening Design (DSD). Effects of solution pH, contact time, adsorbent dosage, initial metal concentration, ionic strength, GO/NC ratio and temperature on Cr ⁶⁺ and Pb ²⁺ adsorption were investigated. Optimization of the adsorption process was done using a desirability function of the Design Expert V11 software. A good agreement between experimental and predicted data proved the efficiency of this model for prediction of real optimum point. The batch experiments implied that the pseudo-second-order model (lowest sum of square error (SSE) values and correlation coefficients (R²) > 0.999) was better to describe the adsorption kinetics of Cr⁶⁺ and Pb²⁺ onto the HPMNPU/GO.

Recent Advances in Water Treatment Using Graphene-based Materials

:

A variety of processes were reported for efficient removing of heavy metal from wastewater, including but not limited to ion exchange, reverse osmosis, membrane filtration, flotation, coagulation, chemical precipitation, solvent extraction, electrochemical treatments, evaporation, oxidation, adsorption, and biosorption. Among the aforementioned techniques, adsorption/ion exchange has been known as a most important method for removing heavy metal ions and organic pollutants due to great removal performance, simple and easy process, cost-effectiveness and the considerable choice of adsorbent materials.

:

Nanotechnology and its applications have been developed in most branches of science and technology. Extensive studies have been conducted to remove heavy metal ions from wastewater by preparation and applications of various nanomaterials. Nanomaterials offer advantages in comparison to other materials including an extremely high specific surface area, low-temperature modification, short intraparticle diffusion distance, numerous associated sorption sites, tunable surface chemistry, and pore size. In order to evaluate an adsorbent, two key parameters are: the adsorption capacity and the desorption property. The adsorption parameters including the absorbent loading, pH and temperature, concentration of heavy metal ion, ionic strength, and competition among metal ions are often studied and optimized.

:

Several reviews have been published on the application of Graphene (G), Graphene Oxide (GO) in water treatment. In this minireview, we attempted to summarize the recent research advances in water treatment and remediation process by graphene-based materials and provide intensive knowledge of the removal of pollutants in batch and flow systems. Finally, future applicability perspectives are offered to encourage more interesting developments in this promising field. This minireview does not include patent literature.

Recent advances in hexavalent chromium removal from aqueous solutions by adsorptive methods

Chromium exists mainly in two forms in environmental matrices, namely, the hexavalent (Cr(vi)) and trivalent (Cr(iii)) chromium. While Cr(iii) is a micronutrient, Cr(vi) is a known carcinogen, and that warrants removal from environmental samples. Amongst the removal techniques reported in the literature, adsorption methods are viewed as superior to other methods because they use less chemicals; consequently, they are less toxic and easy to handle. Mitigation of chromium using adsorption methods has been achieved by exploiting the physical, chemical, and biological properties of Cr(vi) due to its dissolution tendencies in aqueous solutions. Many adsorbents, including synthetic polymers, activated carbons, biomass, graphene oxide, and nanoparticles as well as bioremediation, have been successfully applied in Cr(vi) remediation. Initially, adsorbents were used singly in their natural form, but recent literature shows that more composite materials are generated and applied. This review focused on the recent advances, insights, and project future directions for these adsorbents as well as compare and contrast the performances achieved by the mentioned adsorbents and their variants.

Highly Efficient and Reusable Montmorillonite/Fe₃O₄/Humic Acid Nanocomposites for Simultaneous Removal of Cr(VI) and Aniline

Recyclable nanomaterials are in great need to develop clean technology for applications in the removal of water contaminants. In this work, easily separable montmorillonite/Fe₃O₄/humic acid (MFH) nanocomposites were fabricated through a facile hydrothermal route. It was found the adsorption ability and stability of MFH was significantly enhanced due to the synergistic effects between montmorillonite, Fe₃O₄ nanoparticles and humic acid. The MFH nanocomposites are highly efficient and recyclable as they can remove at least 82.3% of Cr(VI) and 95.1% of aniline in six consecutive runs. The adsorption mechanism was investigated by analyzing the kinetic parameters of pseudo first-order, pseudo second-order, and intraparticle diffusion models and describing the equilibrium isotherms of Langmuir and Freundlich models. Results indicated different adsorption mechanisms of Cr(VI) and aniline by MFH. The readily synthesized MFH nanocomposites can act as effective and practical materials for environmental applications.

Enhanced removal of hexavalent chromium from aqueous media using a highly stable and magnetically separable rosin-biochar-coated TiO2@C nanocomposite

Recently, nanosized metal-oxides have been extensively investigated for their ability to remove metal ions from aqueous media. However, the activity and capacity of these nanosized metal-oxides for removing metal ions decrease owing to their agglomeration in aqueous media. Herein, we synthesized a highly stable and magnetically separable rosin-biochar-coated (RBC) TiO₂@C nanocomposite through a facile and environment-friendly wet chemical coating process, followed by a one-step heating route (pyrolysis) for efficient removal of Cr(vi) from aqueous solution. An array of techniques, namely, TEM, HRTEM, TEM-EDS, XRD, FTIR, VSM, BET and TGA, were used to characterize the prepared nanocomposite. The pyrolysis of rosin into biochar and the fabrication of Fe onto the RBC-TiO₂@C nanocomposite were confirmed by FTIR and XRD examination, respectively. Moreover, TEM and HRTEM images and elemental mapping using TEM-EDS showed good dispersion of iron and carbon on the surface of the RBC-TiO₂@C nanocomposite. Sorption of Cr(vi) ions on the surface of the RBC-TiO₂@C nanocomposite was very fast and efficient, having a removal efficiency of ∼95% within the 1^st minute of reaction. Furthermore, thermodynamic analysis showed negative values of Gibb's free energy at all five temperatures, indicating that the adsorption of Cr(vi) ions on the RBC-TiO₂@C nanocomposite was favorable and spontaneous. Conclusively, our results indicate that the RBC-TiO₂@C nanocomposite can be used for efficient removal of Cr(vi) from aqueous media due to its novel synthesis and extraordinary adsorption efficacy during a short time period.

A biochar-coated RBC-TiO₂@C nanocomposite was synthesized using a wet chemical coating followed by a one-step heating route (pyrolysis) for the efficient removal of Cr(vi).

Chemical sensing with 2D materials

During the last decade, two-dimensional materials (2DMs) have attracted great attention due to their unique chemical and physical properties, which make them appealing platforms for diverse applications in sensing of gas, metal ions as well as relevant chemical entities.

Synthesis of MnFe2O4 and Mn3O4 magnetic nano-composites with enhanced properties for adsorption of Cr(VI): artificial neural network modeling

This study reports adsorptive removal of Cr(VI) by magnetic manganese ferrite and manganese oxide nano-particles (MnF-MO-NPs) composite from aqueous media. The X-ray diffraction pattern of MnF-MO-NPs revealed a polycrystalline nature with nanoscale crystallite size. The prepared adsorbent with high Brunauer-Emmett-Teller specific surface area of 100.62 m²/g and saturation magnetization of 30.12 emu/g exhibited maximum Cr(VI) removal at solution pH 2.0 and was easily separated from water under an external magnetic field. Adsorption capacity as much as 91.24 mg/g is reported and electrostatic interaction between positively charged adsorbent surface and anionic metal ion species is the main driving force in this adsorption. Adsorption experimental data followed Langmuir isotherm and second order kinetics. Partial involvement of intra-particle diffusion was also observed due to the mesoporous nature of MnF-MO-NPs. The thermodynamic studies revealed that the process was favorable, spontaneous and exothermic in nature. An artificial neural network model was developed for accurate prediction of Cr(VI) ions removal with minimum mean squared error (MSE) of 15.4 × 10^-4 and maximum R² of 0.98. Owing to large surface to volume ratio, advantage of easy magnetic separation, and high adsorption capacity towards Cr(VI), the reported MnF-MO-NPs appear to be a potential candidate in Cr(VI) contaminated wastewater remediation.

Shape-Controlled Synthesis of Magnetic Iron Oxide@SiO₂-Au@C Particles with Core-Shell Nanostructures

The preparation of nonspherical magnetic core-shell nanostructures with uniform sizes still remains a challenge. In this study, magnetic iron oxide@SiO2-Au@C particles with different shapes, such as pseduocube, ellipsoid, and peanut, were synthesized using hematite as templates and precursors of magnetic iron oxide. The as-obtained magnetic particles demonstrated uniform sizes, shapes, and well-designed core-shell nanostructures. Transmission electron microscopy (TEM) and energy dispersive X-ray spectroscopy (EDX) analysis showed that the Au nanoparticles (AuNPs) of ∼6 nm were uniformly distributed between the silica and carbon layers. The embedding of the metal nanocrystals into the two different layers prevented the aggregation and reduced the loss of the metal nanocrystals during recycling. Catalytic performance of the peanut-like particles kept almost unchanged without a noticeable decrease in the reduction of 4-nitrophenol (4-NP) in 8 min even after 7 cycles, indicating excellent reusability of the particles. Moreover, the catalyst could be readily recycled magnetically after each reduction by an external magnetic field.

Anchoring H3PW12O40 on 3-aminopropyltriethoxysilane modified graphene oxide: enhanced adsorption capacity and photocatalytic activity toward methyl orange

A novel PW₁₂/GO–NH₂ hybrid was obtained via an impregnation method, which exhibited enhanced adsorption capacity and photocatalytic activity.

Polyvinyl alcohol/polysaccharide hydrogel graft materials for arsenic and heavy metal removal

Polyvinyl alcohol/polysaccharide hydrogel formation ((A)–(C)) and metallic species adsorption ((D)) for water treatment.

A novel magnetic polysaccharide–graphene oxide composite for removal of cationic dyes from aqueous solution

Magnetic adsorbents with more adsorption sites can realize efficient adsorption of cationic dyes.