Molecular release from patterned nanoporous gold thin films

Three-dimensional nanoporous gold/gold nanoparticles substrate for surface-enhanced Raman scattering detection of illegal additives in food

Owing to their nanoscale size and porous structure, both colloidal gold nanoparticles (AuNPs) and nanoporous gold (NPG) have demonstrated good and stable surface-enhanced Raman scattering (SERS) activity, and are therefore widely used as SERS substrates for the rapid detection of various components in food, environmental, biological, and other samples. In this study, we fabricated a novel, sensitive, and reproducible composite three-dimensional (3D) substrate for rapid SERS-based detection of illegal additives in food products. AuNPs and NPGs were prepared by chemical reduction and chemical dealloying methods, with the particle size of AuNPs about 60 nm and the pore size of NPG in the range of 5-36 nm. The AuNPs were then assembled on the surface of NPG to form the composite substrate 3D-NPG/AuNPs, which was characterized by transmission electron microscopy, scanning electron microscopy, X-ray diffraction, and other methods. Finally, the new SERS substrate combined with a portable Raman spectrometer was used to detect the illegal food additives 6-benzylaminopurine and melamine, with detection limits of 1 × 10-9 M and 5 × 10-7 M respectively. We further analyzed the relationship between the dealloying time-controlled morphology and the SERS properties of NPG, demonstrating that 3D-NPG/AuNPs as a novel SERS substrate have strong practical application potential in the rapid detection of food additives and other substances.

Applications of Nanoporous Gold in Therapy, Drug Delivery, and Diagnostics

Nanoporous gold (np-Au) has promising applications in therapeutic delivery. The promises arise from its high surface area-to-volume ratio, ease of tuning shape and size, ability to be modified by organic molecules including drugs, and biocompatibility. Furthermore, np-Au nanostructures can generate the photothermal effect. This effect can be used either for controlled release of drugs of therapeutic importance or for destroying cancer cells by heating locally. Despite the enormous potential, the research on the therapeutical use of the np-Au is still in its early stage. In this review, we discuss the current progress and future directions of np-Au for therapeutic applications.

Self-Detachment and Subsurface Densification of Dealloyed Nanoporous Thin Films

Experiment shows thin films of dealloyed nanoporous gold (NPG) spontaneously detaching from massive gold base layers. NPG can also densify near its external surface. This is naturally reproduced by kinetic Monte Carlo (KMC) simulation of dealloying and coarsening and so appears generic for nanoscale network materials evolving by surface diffusion. Near the porous layer's external surface and near its interface with the base layer, gradients in the depth-profile of a laterally averaged mean surface curvature provide driving forces for diffusion and cause divergences of the net fluxes of matter, leading to accretion/densification or to erosion/disconnection. As a toy model, the morphology evolution of substrate-supported nanopillars by surface diffusion illustrates and confirms our considerations. Contrary to cylindrical nanowires, the ligaments in nanoporous materials exhibit pre-existing gradients in the mean curvature. The Plateau-Rayleigh long-wavelength stability criterion is then not applicable and the disconnection accelerated.

Chemically-Gated and Sustained Molecular Transport through Nanoporous Gold Thin Films in Biofouling Conditions

Sustained release and replenishment of the drug depot are essential for the long-term functionality of implantable drug-delivery devices. This study demonstrates the use nanoporous gold (np-Au) thin films for in-plane transport of fluorescein (a small-molecule drug surrogate) over large (mm-scale) distances from a distal reservoir to the site of delivery, thereby establishing a constant flux of molecular release. In the absence of halides, the fluorescein transport is negligible due to a strong non-specific interaction of fluorescein with the pore walls. However, in the presence of physiologically relevant concentration of ions, halides preferentially adsorb onto the gold surface, minimizing the fluorescein–gold interactions and thus enabling in-plane fluorescein transport. In addition, the nanoporous film serves as an intrinsic size-exclusion matrix and allows for sustained release in biofouling conditions (dilute serum). The molecular release is reproducibly controlled by gating it in response to the presence of halides at the reservoir (source) and the release site (sink) without external triggers (e.g., electrical and mechanical).

Nanoporous Gold Monolith for High Loading of Unmodified Doxorubicin and Sustained Co-Release of Doxorubicin-Rapamycin

Nanoparticles (NPs) have been widely explored for delivering doxorubicin (DOX), an anticancer drug, to minimize cardiotoxicity. However, their efficiency is marred by a necessity to chemically modify DOX, NPs, or both and low deposition of the administered NPs on tumors. Therefore, alternative strategies should be developed to improve therapeutic efficacy and decrease toxicity. Here we report the possibility of employing a monolithic nanoporous gold (np-Au) rod as an implant for delivering DOX. The np-Au has very high DOX encapsulation efficiency (>98%) with maximum loading of 93.4 mg cm-3 without any chemical modification required of DOX or np-Au. We provide a plausible mechanism for the high loading of DOX in np-Au. The DOX sustained release for 26 days from np-Au in different pH conditions at 37 °C, which was monitored using UV-Vis spectroscopy. Additionally, we encased the DOX-loaded np-Au with rapamycin (RAPA)-trapped poly(D,L-lactide-co-glycolide) (PLGA) to fabricate an np-Au@PLGA/RAPA implant and optimized the combinatorial release of DOX and RAPA. Further exploiting the effect of the protein corona around np-Au and np-Au@PLGA/RAPA showed zero-order release kinetics of DOX. This work proves that the np-Au-based implant has the potential to be used as a DOX carrier of potential use in cancer treatment.

A pH sensitive thiolated β-cyclodextrin-modified nanoporous gold for controlled release of doxorubicin

This article reports a novel thiolated β-cyclodextrin (HS-β-CD) modified nanoporous gold (NPG) wire for pH sensitive delivery of doxorubicin (DOX) in controlled manner. Nanoporous gold is a versatile material because of its three-dimensional nanoscale network of pores, facile surface functionalization, biocompatibility, and high capacity for the DOX payload. HS-β-CD can form supramolecular inclusion complexes with DOX affording the possibility of altering the controlled release behavior. DOX is one of the most potent anti-tumor drugs used in the treatment of different cancers. The binding of HS-β-CD and DOX was examined using UV-Vis spectroscopy. The prepared NPG structure exhibited excellent properties for controlled drug release outlining the potential of a pH sensitive drug implant for biomedical applications. This delivery system could improve local targeting of the drug as well as alter the rate of release of DOX near tumors.

Self-Assembled Monolayer Formation on a Dental Orthodontic Stainless Steel Wire Surface to Suppress Metal Ion Elution

Metal ion elution, including Cr and Ni from dental orthodontic stainless steel, accounts for some allergies. In this study, a self-assembled monolayer (SAM) on a wire surface is proposed for suppressing such elution. This method involves modifying the stainless steel surface using phosphonic acid containing a long alkyl chain. The uncoated and coated wires are immersed in different acidic solutions, and the supernatant is analyzed by inductively coupled plasma mass spectrometry after 1–4 weeks. The results reveal that Cr and Ni ion elution is significantly suppressed by SAM modification. These findings will help in minimizing potential allergens from dental orthodontics.

Anomalous Trends in Nucleic Acid-Based Electrochemical Biosensors with Nanoporous Gold Electrodes

Molecular diagnostics have significantly advanced the early detection of diseases, where electrochemical sensing of biomarkers has shown considerable promise. For a nucleic acid-based electrochemical sensor with signal-off behavior, the performance is evaluated by percent signal suppression (% ss), which indicates the change in current after hybridization. The % ss is generally due to more redox molecules (e.g., methylene blue) associating with the probe DNA bases in the single-strand form than the double-strand form upon hybridization with the target nucleic acid. Nanostructured electrodes generally enhance electrochemical sensor performance via several mechanisms, including increased number of capture probes per electrode volume and unique nanoscale transport phenomena. Here, we employ nanoporous gold (np-Au) as a model electrode material to study the influence of probe immobilization solution concentration on sensor performance and the underlying mechanisms. Unlike planar gold (pl-Au) electrodes, where % ss reaches a steady state with increasing concentration of the grafting solution, the % ss displays peak performance at certain grafting solution concentrations followed by rapid deterioration and reversal of the % ss polarity, suggesting an unexpected case of increased charge transfer upon hybridization. Fluorometric assessments of electrochemically desorbed nucleic acids for different electrode morphologies reveal that a significant amount of DNA molecules (unhybridized and hybridized) remain within the nanopores posthybridization. Analysis of electrochemical signals (e.g., square wave voltammogram shape) suggests that the large unbound nucleic acid concentration may be altering the modes of methylene blue interaction with the nucleic acids and charge transfer to the electrode surfaces.

Biofouling-Resistant Platinum Bimetallic Alloys

A new electrosynthetic approach for the fabrication of three-dimensional bicontinuous nanoporous platinum-based (3D-BC-NP-Pt(Au)) electrodes is described. Binary Pt-Ag alloys are first electrodeposited on gold substrates from appropriately formulated plating solutions. Following annealing and dealloying, a new family of nanoporous platinum-based electrodes emerges whose morphology, porosity, and chemical compositions depend on electrodeposition parameters and plating solution composition. Scanning electron microscopy images reveal an interesting and distinctive nanoporous gold-like microstructure with pores and ligaments in the 10-30 nm range arranged in a bicontinuous fashion throughout the thickness of the film. X-ray photoelectron spectroscopy (XPS) confirms that the as-formed electrodeposited films are silver-rich platinum binary alloys. Interestingly, XPS also reveals that after annealing and dealloying, the electrodes are actually ternary alloys containing platinum, gold, and a small amount of residual silver that remains after dealloying. Electrochemical measurements are consistent with this result and disclose a high surface area with roughness factors of 15-24. The ability to successfully conduct electrochemical measurements in biofouling solutions via a unique biosieving-like mechanism is demonstrated by exposure of the unique 3D bicontinuous nanoporous platinum-based electrode to fibrinogen in phosphate buffer and in a solution containing red blood cells. The work described herein has the potential to enrich the fields of electrochemical sensing and biosensing via the introduction of new 3D bicontinuous nanostructured porous platinum-based electrodes that can be easily and reliably fabricated.

A Microfluidic Platform to Study Astrocyte Adhesion on Nanoporous Gold Thin Films

Nanoporous gold (np-Au) electrode coatings have shown improved neural electrophysiological recording fidelity in vitro, in part due to reduced surface coverage by astrocytes. This reduction in astrocytic spreading has been attributed to the influence of electrode nanostructure on focal adhesion (FA) formation. This study describes the development and use of a microfluidic flow cell for imposing controllable hydrodynamic shear on astrocytes cultured on gold surfaces of different morphologies, in order to study the influence of nanostructure on astrocyte adhesion strength as a function of np-Au electrode morphology. Astrocyte detachment (a surrogate for adhesion strength) monotonically increased as feature size was reduced from planar surfaces to np-Au, demonstrating that adhesion strength is dependent on nanostructure. Putative mechanisms responsible for this nanostructure-driven detachment phenomenon are also discussed.

Surface premelting/recrystallization governing the collapse of open-cell nanoporous Cu via thermal annealing

We systematically investigate the collapse of a set of open-cell nanoporous Cu (np-Cu) materials with the same porosity and shape but different specific surface areas, during thermal annealing, by performing large-scale molecular dynamics simulations. Two mechanisms govern the collapse of np-Cu. One is direct surface premelting, facilitating the collapse of np-Cu, when the specific surface area is less than a critical value (∼2.38 nm-1). The other is recrystallization followed by surface premelting, accelerating the sloughing of ligaments and the annihilation of voids, when the critical specific surface area is exceeded. Surface premelting results from surface reconstruction by prompting localized "disordering" and "chaos" on the surface, and the melting temperature reduces linearly with the increase of the specific surface area. Recrystallization is followed by surface premelting as the melting temperature is below the supercooling point, where a liquid is unstable and instantaneously recrystallizes.

Electrically Guided DNA Immobilization and Multiplexed DNA Detection with Nanoporous Gold Electrodes

Molecular diagnostics have significantly advanced the early detection of diseases, where the electrochemical sensing of biomarkers (e.g., DNA, RNA, proteins) using multiple electrode arrays (MEAs) has shown considerable promise. Nanostructuring the electrode surface results in higher surface coverage of capture probes and more favorable orientation, as well as transport phenomena unique to nanoscale, ultimately leading to enhanced sensor performance. The central goal of this study is to investigate the influence of electrode nanostructure on electrically-guided immobilization of DNA probes for nucleic acid detection in a multiplexed format. To that end, we used nanoporous gold (np-Au) electrodes that reduced the limit of detection (LOD) for DNA targets by two orders of magnitude compared to their planar counterparts, where the LOD was further improved by an additional order of magnitude after reducing the electrode diameter. The reduced electrode diameter also made it possible to create a np-Au MEA encapsulated in a microfluidic channel. The electro-grafting reduced the necessary incubation time to immobilize DNA probes into the porous electrodes down to 10 min (25-fold reduction compared to passive immobilization) and allowed for grafting a different DNA probe sequence onto each electrode in the array. The resulting platform was successfully used for the multiplexed detection of three different biomarker genes relevant to breast cancer diagnosis.

Guided Heterogeneous Nucleation of Sodium Chloride at Self-Assembled Monolayer-Modified Nanoporous Gold Films

Drug delivery devices are generally inefficient when releasing the active compound at the targeted position. In this work, we investigate nanoporous gold (np-Au) as the drug eluting device, and we use the precipitation of NaCl as a model of drug sedimentation to evaluate the patterns of solute distribution. Hydrophilic and hydrophobic modifications of np-Au result in different, but both inhomogeneous, release patterns, with most of the precipitate forming outside the device. In contrast, the fabrication of a hydrophobic-hydrophilic-layered architecture allows full penetration through the bicontinuous np-Au network, resulting in a homogeneous release pattern. Similar architectures could be used to enhance the efficacy of drug delivery.

Engineering the interface between lipid membranes and nanoporous gold: A study by quartz crystal microbalance with dissipation monitoring

Nanoporous gold (np-Au) is a nanostructured metal with many desirable attributes. Despite the growing number of applications of nanoporous materials, there are still open questions regarding their fabrication and subsequent surface functionalization. For example, the hydrophobic nature of gold surfaces makes the formation of planar supported lipid layers challenging. Here, the authors engineer the interface between np-Au and 1,2-dioleoyl-sn-glycero-3-phosphocholine lipid layers using well-differentiated approaches based on vesicle adsorption and solvent exchange methods. The results reveal that the nanotopography of the np-Au surface plays a clear role in the vesicle adsorption process. Compared to vesicle adsorption, the solvent exchange method proves successful in the formation of planar supported lipid bilayers in both np-Au and planar Au surfaces, being less sensitive to the surface morphological features. The influence of nanostructured surfaces on lipid layer formation is determined by the driving mechanisms behind each process, i.e., the balance of adhesion and cohesion forces in vesicle adsorption and lyotropic lipid phase transitions in solvent exchange, respectively. A better understanding of such interactions will contribute to the development of a variety of applications, from electrochemical biosensors to drug screening and delivery systems, using nanoporous gold coated with stimuli-responsive lipid layers.

Configurable microfluidic platform for investigating therapeutic delivery from biomedical device coatings

Advanced biomedical device coatings have shown significant promise in delivery of therapeutics (e.g., small-molecule drugs, proteins) for a wide range of medical interventions ranging from targeted cancer therapy to management of atherosclerosis. In order to accelerate the development of such coatings, there is a need for tools to investigate the loading capacity and release kinetics with high temporal resolution and in a variety of physiological conditions. To address this need, we report a microfluidic platform, where the coating on a substrate can be mounted onto the microchannel and the device can be configured in two physiologically-relevant modes: (i) flow-mode allows for monitoring the release from the coating in contact with a liquid flowing at a specific rate, modeling the case of a drug-eluting stent. (ii) Static-mode, where the channel is filled with a stationary gel, mimics the case of drug-eluting brain implant. We demonstrate the utility of the platform with a fluorescein-loaded nanoporous gold coating and monitor in real-time the release kinetics both under deionized water infusion and an agarose gel-filled channel via fluorescence microscopy coupled to a LabVIEW-based interface.

Nanostructure Introduces Artifacts in Quantitative Immunofluorescence by Influencing Fluorophore Intensity

Quantitative analysis of fluorescence signals from cells reacted with fluorescently labeled probes is a widely-used method for assessing cell biology. This method has become especially powerful for screening novel nanostructured materials for their influence on cell behavior. However, the effect of nanostructured surface on fluorescence intensity has largely been ignored, which likely leads to erroneous conclusions about cell behavior. This paper investigates this possibility by using fibroblasts cultured on nanoporous gold (np-Au) as a model nanostructured material system. We found that fibroblasts stained for f-actin using phalloidin conjugated with common fluorophores display different levels of fluorescence on np-Au, planar gold, and glass, suggesting different levels of f-actin composition. However, direct quantification via western blots indicates that the actin expression is the same across all conditions. We further investigated whether the fluorescence intensity depended on np-Au feature size, complementing the findings with reflection dark field measurements from different np-Au surfaces. Overall, our experimental measurements in agreement with our electrodynamic simulations suggest that nanostructured surfaces alter the fluorescence intensity of fluorophores by modulating both the excitation and light emission processes. We conclude that comparison of fluorescence on materials with different nanostructures should be done with a quantification method decoupled from the nanostructure's influence.

Nanoporous Gold Biointerfaces: Modifying Nanostructure to Control Neural Cell Coverage and Enhance Electrophysiological Recording Performance

Nanostructured neural interface coatings have significantly enhanced recording fidelity in both implantable and in vitro devices. As such, nano-porous gold (np-Au) has shown promise as a multifunctional neural interface coating due, in part, to its ability to promote nanostructure-mediated reduction in astrocytic surface coverage while not affecting neuronal coverage. The goal of this study is to provide insight into the mechanisms by which the np-Au nanostructure drives the differential response of neurons versus astrocytes in an in vitro model. Utilizing microfabricated libraries that display varying feature sizes of np-Au, it is demonstrated that np-Au influ-ences neural cell coverage through modulating focal adhesion formation in a feature size-dependent manner. The results here show that surfaces with small (≈30 nm) features control astrocyte spreading through inhibition of focal adhesion formation, while surfaces with large (≈170 nm and greater) features control astrocyte spreading through other mechanotransduction mechanisms. This cellular response combined with lower electrical impedance of np-Au electrodes significantly enhances the fidelity and stability of electrophysiological recordings from cortical neuronglia co-cultures relative to smooth gold electrodes. Finally, by leveraging the effect of nanostructure on neuronal versus glial cell attachment, the use of laser-based nanostructure modulation is demonstrated for selectively patterning neurons with micrometer spatial resolution.

Electrochemical impedance spectroscopy study of carbohydrate-terminated alkanethiol monolayers on nanoporous gold: Implications for pore wetting

Electrochemical impedance spectroscopy (EIS) is used to compare the apparent electron transfer rate constant (kapp) for a series of alkanethiol and of carbohydrate-terminated alkanethiol self-assembled monolayers (SAMs) on both flat gold and on nanoporous gold (np-Au). Using the surface area for np-Au determined by oxide stripping, the values of kapp for the alkanethiol modified np-Au are initially over two orders of magnitude smaller than the values found on flat Au. This result provides evidence that the diffusing redox probe Fe(CN)63-/4- only accesses a fraction of the np-Au surface after alkanethiol modification suggesting very limited wetting of the internal pores due to the hydrophobic nature of these surfaces. In contrast, for np-Au modified by carbohydrate-terminated (mannose or galactose) alkanethiols the values of kapp are about 10-40 fold smaller than on flat gold, suggesting more extensive access of the diffusing redox probe within the pores and better but still incomplete wetting, a result also found for modification of np-Au with mercaptododecanoic acid. A short chain PEG thiol derivative is found to result in a comparison of kapp values that suggests nearly complete wetting of the internal pores for this highly hydrophilic derivative. These results are of significance for the potential applications of SAM modified np-Au in electrochemical sensors, especially for those based on carbohydrate-protein recognition, or those of np-Au modified by SAMs with polar terminal groups.

New Approach on Quantification of Porosity of Thin Films via Electron-Excited X-ray Spectra

One of the crucial characteristics of functionalized thin films is their porosity (i.e., the ratio between the pore volume and the volume of the whole film). Due to the very low amount of material per coated area corresponding to thin films, it is a challenge for analytics to measure the film porosity. In this work, we present an approach to determine the porosity of thin films by means of electron probe microanalysis (EPMA) either by wavelength-dispersive X-ray spectrometry (WDX) or by energy-dispersive X-ray spectrometry (EDX) with a scanning electron microscope (SEM). The procedure is based on the calculation of the film mass deposition from electron-excited X-ray spectra. The mass deposition is converted into film density by division of measured film thickness. Finally, the film porosity is calculated from the measured film density and the density of bulk, nonporous film material. The general applicability of the procedure to determine the porosity is demonstrated on thin templated mesoporous TiO2 films, dip-coated on silicon wafer, with controlled porosity in the range of 15 to 50%. The high accuracy of the mass deposition as determined from X-ray spectra was validated with independent methods (ICP-OES and weighing). Furthermore, for the validation of the porosity results, ellipsometry, interference fringes method (IFM), and focused ion beam (FIB) cross sectioning were employed as independent techniques. Hence, the approach proposed in the present study is proven to be suited as a new analytical tool for accurate and relatively fast determination of the porosity of thin films.

Sequence-Specific Electrical Purification of Nucleic Acids with Nanoporous Gold Electrodes

Nucleic-acid-based biosensors have enabled rapid and sensitive detection of pathogenic targets; however, these devices often require purified nucleic acids for analysis since the constituents of complex biological fluids adversely affect sensor performance. This purification step is typically performed outside the device, thereby increasing sample-to-answer time and introducing contaminants. We report a novel approach using a multifunctional matrix, nanoporous gold (np-Au), which enables both detection of specific target sequences in a complex biological sample and their subsequent purification. The np-Au electrodes modified with 26-mer DNA probes (via thiol-gold chemistry) enabled sensitive detection and capture of complementary DNA targets in the presence of complex media (fetal bovine serum) and other interfering DNA fragments in the range of 50-1500 base pairs. Upon capture, the noncomplementary DNA fragments and serum constituents of varying sizes were washed away. Finally, the surface-bound DNA-DNA hybrids were released by electrochemically cleaving the thiol-gold linkage, and the hybrids were iontophoretically eluted from the nanoporous matrix. The optical and electrophoretic characterization of the analytes before and after the detection-purification process revealed that low target DNA concentrations (80 pg/μL) can be successfully detected in complex biological fluids and subsequently released to yield pure hybrids free of polydisperse digested DNA fragments and serum biomolecules. Taken together, this multifunctional platform is expected to enable seamless integration of detection and purification of nucleic acid biomarkers of pathogens and diseases in miniaturized diagnostic devices.

Mechanisms of Reduced Astrocyte Surface Coverage in Cortical Neuron-Glia Co-cultures on Nanoporous Gold Surfaces

Nanoporous gold (np-Au) is a promising multifunctional material for neural electrodes. We have previously shown that np-Au nanotopography reduces astrocyte surface coverage (linked to undesirable gliosis) while maintaining high neuronal coverage in a cortical primary neuron-glia co-culture model as long as two weeks in vitro. Here, we investigate the potential influence of secreted soluble factors from cells grown on np-Au on the cell type-specific surface coverage of cells grown on conventional tissue culture plastic and test the hypothesis that secretion of factors is responsible for inhibiting astrocyte coverage on np-Au. In order to assess whether factors secreted from cells grown on np-Au surfaces reduced surface coverage by astrocytes, we seeded fresh primary rat neuron-glia co-cultures on conventional polystyrene culture dishes, but maintained the cells in conditioned media from co-cultures grown on np-Au surfaces. After one week in vitro, a preferential reduction in astrocyte surface coverage was not observed, suggesting that soluble factors are not playing a role. In contrast, four hours after cell seeding there were a significant number of non-adhered, yet still viable, cells for the cultures on np-Au surfaces. We hypothesize that the non-adherent cells are mainly astrocytes, because: (i) there was no difference in neuronal cell coverage between np-Au and pl-Au for long culture durations and (ii) neurons are post-mitotic and not expected to increase in number upon attaching to the surface. Overall, the results suggest that the np-Au topography leads to preferential neuronal attachment shortly after cell seeding and limits astrocyte-specific np-Au surface coverage at longer culture durations.

Utilizing dynamic laser speckle to probe nanoscale morphology evolution in nanoporous gold thin films

This paper demonstrates the use of dynamic laser speckle autocorrelation spectroscopy in conjunction with the photothermal treatment of nanoporous gold (np-Au) thin films to probe nanoscale morphology changes during the photothermal treatment. Utilizing this spectroscopy method, backscattered speckle from the incident laser is tracked during photothermal treatment and both the characteristic feature size and annealing time of the film are determined. These results demonstrate that this method can successfully be used to monitor laser-based surface modification processes without the use of ex-situ characterization.

Engineering on-chip nanoporous gold material libraries via precision photothermal treatment

Libraries of nanostructured materials on a single chip are a promising platform for high throughput and combinatorial studies of structure-property relationships in the fields of physics and biology. Nanoporous gold (np-Au), produced by an alloy corrosion process, is a nanostructured material specifically suited for such studies because of its self-similar thermally induced coarsening behavior. However, traditional heat application techniques for the modification of np-Au are bulk processes that cannot be used to generate a library of different pore sizes on a single chip. Here, laser micro-processing offers an attractive solution to this problem by providing a means to apply energy with high spatial and temporal resolution. In the present study we use finite element multiphysics simulations to predict the effects of laser mode (continuous-wave vs. pulsed) and thermal conductivity of the supporting substrate on the local np-Au film temperatures during photothermal annealing. Based on these results we discuss the mechanisms by which the np-Au network is coarsened. Thermal transport simulations predict that continuous-wave mode laser irradiation of np-Au thin films on a silicon substrate supports the widest range of morphologies that can be created through photothermal annealing of np-Au. Using the guidance provided by simulations, we successfully fabricate an on-chip material library consisting of 81 np-Au samples of 9 different morphologies for use in the parallel study of structure-property relationships.

Substrate Topography Guides Pore Morphology Evolution in Nanoporous Gold Thin Films

This paper illustrates the effect of substrate topography on morphology evolution in nanoporous gold (np-Au) thin films. One micron-high silicon ridges with widths varying between 150 nm to 50 µm were fabricated and coated with 500 nm-thick np-Au films obtained by dealloying sputtered gold-silver alloy films. Analysis of scanning electron micrographs of the np-Au films following dealloying and thermal annealing revealed two distinct regimes where the ratio of film thickness to ridge width determines the morphological evolution of np-Au films.

Antibacterial property of Ag nanoparticle-impregnated N-doped titania films under visible light

Photocatalysts produce free radicals upon receiving light energy; thus, they possess antibacterial properties. Silver (Ag) is an antibacterial material that disrupts bacterial physiology. Our previous study reported that the high antibacterial property of silver nanoparticles on the surfaces of visible light-responsive nitrogen-doped TiO₂ photocatalysts [TiO₂(N)] could be further enhanced by visible light illumination. However, the major limitation of this Ag-TiO₂ composite material is its durability; the antibacterial property decreased markedly after repeated use. To overcome this limitation, we developed TiO₂(N)/Ag/TiO₂(N) sandwich films in which the silver is embedded between two TiO₂(N) layers. Various characteristics, including silver and nitrogen amounts, were examined in the composite materials. Various analyses, including electron microscopy, energy dispersive spectroscopy, X-ray diffraction, and ultraviolet–visible absorption spectrum and methylene blue degradation rate analyses, were performed. The antibacterial properties of the composite materials were investigated. Here we revealed that the antibacterial durability of these thin films is substantially improved in both the dark and visible light, by which bacteria, such as Escherichia coli, Streptococcus pyogenes, Staphylococcus aureus, and Acinetobacter baumannii, could be efficiently eliminated. This study demonstrated a feasible approach to improve the visible-light responsiveness and durability of antibacterial materials that contain silver nanoparticles impregnated in TiO₂(N) films.

Nanoporous gold as a neural interface coating: effects of topography, surface chemistry, and feature size

Designing neural interfaces that maintain close physical coupling of neurons to an electrode surface remains a major challenge for both implantable and in vitro neural recording electrode arrays. Typically, low-impedance nanostructured electrode coatings rely on chemical cues from pharmaceuticals or surface-immobilized peptides to suppress glial scar tissue formation over the electrode surface (astrogliosis), which is an obstacle to reliable neuron-electrode coupling. Nanoporous gold (np-Au), produced by an alloy corrosion process, is a promising candidate to reduce astrogliosis solely through topography by taking advantage of its tunable length scale. In the present in vitro study on np-Au's interaction with cortical neuron-glia co-cultures, we demonstrate that the nanostructure of np-Au achieves close physical coupling of neurons by maintaining a high neuron-to-astrocyte surface coverage ratio. Atomic layer deposition-based surface modification was employed to decouple the effect of morphology from surface chemistry. Additionally, length scale effects were systematically studied by controlling the characteristic feature size of np-Au through variations in the dealloying conditions. Our results show that np-Au nanotopography, not surface chemistry, reduces astrocyte surface coverage while maintaining high neuronal coverage and may enhance neuron-electrode coupling through nanostructure-mediated suppression of scar tissue formation.

Soft matter in hard confinement: phase transition thermodynamics, structure, texture, diffusion and flow in nanoporous media

Spatial confinement in nanoporous media affects the structure, thermodynamics and mobility of molecular soft matter often markedly. This article reviews thermodynamic equilibrium phenomena, such as physisorption, capillary condensation, crystallisation, self-diffusion, and structural phase transitions as well as selected aspects of the emerging field of spatially confined, non-equilibrium physics, i.e. the rheology of liquids, capillarity-driven flow phenomena, and imbibition front broadening in nanoporous materials. The observations in the nanoscale systems are related to the corresponding bulk phenomenologies. The complexity of the confined molecular species is varied from simple building blocks, like noble gas atoms, normal alkanes and alcohols to liquid crystals, polymers, ionic liquids, proteins and water. Mostly, experiments with mesoporous solids of alumina, gold, carbon, silica, and silicon with pore diameters ranging from a few up to 50 nm are presented. The observed peculiarities of nanopore-confined condensed matter are also discussed with regard to applications. A particular emphasis is put on texture formation upon crystallisation in nanoporous media, a topic both of high fundamental interest and of increasing nanotechnological importance, e.g. for the synthesis of organic/inorganic hybrid materials by melt infiltration, the usage of nanoporous solids in crystal nucleation or in template-assisted electrochemical deposition of nano structures.

Electrochemical study of nanoporous gold revealing anti-biofouling properties

Schematic shows the morphology of the adsorbed BSA layer on nanoporous gold. Initial response of the electrode from biofouling resulted in faradaic current decay followed by its regeneration due to slow diffusion of analytes through the fouled layer.