An upconversion nanocomposite for fluorescence resonance energy transfer based cholesterol-sensing in human serum

Oligomer Sensor Nanoarchitectonics for “Turn-On” Fluorescence Detection of Cholesterol at the Nanomolar Level

Sensitive and rapid monitoring of cholesterol levels in the human body are highly desirable as they are directly related to the diagnosis of cardiovascular diseases. By using the nanoarchitectonic approach, a novel fluorescent conjugated oligofluorene (OFP-CD) functionalized with β-cyclodextrin (β-CD) was assembled for “Turn-On” fluorescence sensing of cholesterol. The appended β-CD units in OFP-CD enabled the forming of host-guest complexes with dabsyl chloride moieties in water, resulting in fluorescence quenching of the oligofluorene through intermolecular energy transfer. In the presence of cholesterol molecules, a more favorable host-guest complex with stoichiometry 1 cholesterol: 2 β-CD units was formed, replacing dabsyl chloride in β-CD’s cavities. This process resulted in fluorescence recovery of OFP-CD, owing to disruption of energy transfer. The potential of this nanoarchitectonic system for “Turn-On” sensing of cholesterol was extensively studied by fluorescence spectroscopy. The high selectivity of the sensor for cholesterol was demonstrated using biologically relevant interfering compounds, such as carbohydrates, amino acids, metal ions, and anions. The detection limit (LOD value) was as low as 68 nM, affirming the high sensitivity of the current system.

Advances in fluorescence sensing enabled by lanthanide-doped upconversion nanophosphors

Lanthanide-doped upconversion nanoparticles (UCNPs), characterized by converting low-energy excitation to high-energy emission, have attracted considerable interest due to their inherent advantages of large anti-Stokes shifts, sharp and narrow multicolor emissions, negligible autofluorescence background interference, and excellent chemical- and photo-stability. These features make them promising luminophores for sensing applications. In this review, we give a comprehensive overview of lanthanide-doped upconversion nanophosphors including the fundamental principle for the construction of UCNPs with efficient upconversion luminescence (UCL), followed by state-of-the-art strategies for the synthesis and surface modification of UCNPs, and finally describing current advances in the sensing application of upconversion-based probes for the quantitative analysis of various analytes including pH, ions, molecules, bacteria, reactive species, temperature, and pressure. In addition, emerging sensing applications like photodetection, velocimetry, electromagnetic field, and voltage sensing are highlighted.

Photonic Crystal Effects on Upconversion Enhancement of LiErF4:0.5%Tm3+@LiYF4 for Noncontact Cholesterol Detection

Cholesterol is a vital compound in maintenance for human health, and its concentration levels are tightly associated with various diseases. Therefore, accurate monitoring of cholesterol is of great significance in clinical diagnosis. Herein, we fabricated a noncontact biosensor based on photonic crystal-enhanced upconversion nanoparticles (UCNPs) for highly sensitive and interference-free cholesterol detection. By compounding LiErF₄:0.5%Tm³⁺@LiYF₄ UCNPs with poly(methyl methacrylate) (PMMA) photonic crystals (OPCs), we were able to selectively tune the coupling of the photonic band gap to the excitation field and modulate the upconversion (UC) luminescence intensity, given the unique multi-wavelength excitation property of LiErF₄:0.5%Tm³⁺@LiYF₄. A 48.5-fold enhancement of the monochromatic red UC emission was ultimately achieved at 980 nm excitation, ensuring improved detection sensitivity. Based on the principle of quenching of the intense monochromic red UC emission by the oxidation products of 3,3',5,5'-tetramethylbenzidine (TMB) yielded from the cholesterol cascade reactions, the biosensor has a detection limit of 1.6 μM for cholesterol with excellent specificity and stability. In addition, the testing results of the as-designed biosensor in patients are highly consistent with clinical diagnostic data, providing a sensitive, reliable, reusable, interference-free, and alternative strategy for clinical cholesterol detection.

Non-enzymatic electrochemical cholesterol sensor based on strong host-guest interactions with a polymer of intrinsic microporosity (PIM) with DFT study

Advances in materials science have accelerated the development of diagnostic tools with the last decade witnessing the development of enzyme-free sensors, owing to the improved stability, low cost and simple fabrication of component materials. However, the specificity of non-enzymatic sensors for certain analytes still represents a challenging task, for example the determination of cholesterol level in blood is vital due to its medical relevance. In this work, a reagent displacement assay for cholesterol sensing in serum samples was developed. It is based on coating of a glassy carbon electrode with a polymer of intrinsic microporosity (PIM) that forms a host-guest complex with methylene blue (MB). In the presence of cholesterol, the MB electroactive probe was displaced due to the stronger association of cholesterol guest to the PIM host. The decrease in the oxidative current was proportional to the cholesterol concentration achieving a detection limit of approximately 0.1 nM. Moreover, to further assist the experimental studies, comprehensive theoretical calculations are also performed by using density functional theory (DFT) calculations.

A highly sensitive biosensor based on Au NPs/rGO-PAMAM-Fc nanomaterials for detection of cholesterol

Objective

This study aimed to construct a biosensor using Au nanoparticles (Au NPs) and reduced graphene-polyamide-amine-ferrocene (rGO-PAMAM-Fc) nanomaterials designed for rapid and sensitive detection of cholesterol.

Materials and methods

In this study, a highly sensitive biosensor based on Au NPs/ rGO-PAMAM-Fc nanomaterials was manufactured for detection of cholesterol. The rGO-PAMAM-Fc and Au NPs were modified on the surface of the electrode and then coated with cholesterol oxidase (ChOx) and cholesterol esterase (ChEt) to develop the ChOx&ChEt/Au NPs/rGO-PAMAM-Fc biosensor.

Results

The capability of rGO-PAMAM-Fc nanomaterials in fabricating a more efficient biosensor was validated through stability, selectivity and reproducibility checks. Under optimal conditions, the newly developed biosensor showed a linear relationship with logarithm of cholesterol concentration from 0.0004 to 15.36 mM (R²=0.9986), and a low detection limit of 2 nM was obtained at the signal/noise ratio of 3.

Conclusion

The ChOx&ChEt/Au NPs/rGO-PAMAM-Fc biosensor was successfully applied for the measurement of cholesterol in human serum, which implies that the biosensor has a potential application in clinical diagnostics.

Bifunctional magnetic nanoparticles for efficient cholesterol detection and elimination via host-guest chemistry in real samples

Cholesterol is an essential compound for maintaining cellular homeostasis and human healthy. Sensitive detection of cholesterol and efficient elimination of excess cholesterol have become the essential manipulations in clinical diagnosis and health management. To date, it is still quite challenging that cholesterol detection and elimination tasks are carried out simultaneously. In this study, bifunctional magnetic nanoparticles (Fe₃O₄@PDA-PBA-CD) are designed and fabricated to overcome this difficulty. Taking advantages of competitive host-guest interaction and magnetic separation, highly efficient, reusable and simultaneous cholesterol detection and elimination can be achieved. The limit of detection is determined to be 4.3 nM, which is comparable or even lower than existing methods. The distinguished performance may attribute to the high loading efficiency and magnetic enrichment of nanoparticles. Besides, this efficient strategy is resistant to interfering substances, thus realizing sensitive cholesterol detection in real sample. Simultaneously, the bifunctional magnetic nanoparticles also have up to 95% cholesterol elimination efficiency, which is higher than previous reported methods. Furthermore, the nanoparticles are turned out to be reusable within 5 times without noticeable loss in cholesterol elimination efficiency. Therefore, the bifunctional magnetic nanoparticles fabricated here could hold great potential for simultaneous cholesterol detection and elimination in practical applications.

Organic-Dye-Modified Upconversion Nanoparticle as a Multichannel Probe To Detect Cu2+ in Living Cells

The development of an inorganic-organic hybrid probe to more accurately detect ions in living systems is very challenging but highly desirable. Here we combined upconversion nanoparticles with the electrically active ferrocene group to detect Cu²⁺ in living cells. The as-prepared probe displays three different signal changes in absorption, emission, and electrochemical behavior, respectively, during Cu²⁺ ion detection. Moreover, this new probe has been demonstrated to show high stability and adaptability. In addition, bioimaging testing reveals that this probe is suitable for detecting and visualizing Cu²⁺ in A549 cells with low cytotoxicity.

A "win-win" nanoplatform: TiO2:Yb,Ho,F for NIR light-induced synergistic therapy and imaging

To avoid the defect of low energy transfer efficiency in core-shell UCNP-TiO₂ NPs, doping rare earth into TiO₂ and improving the photocatalytic activity of TiO₂ itself under Vis-NIR light might be a more direct and efficient strategy for high ¹O₂ production. Here, we designed a TiO₂:Yb,Ho,F-β-CD@DTX/HA nanoplatform using TiO₂:Yb,Ho,F as the core, β-CD as the drug carrier, hyaluronic acid (HA) as the capping agent and target, and then applied it for 808 nm induced photodynamic-chemotherapy and 980 nm upconversion fluorescence/MR imaging. The results were as follows: (i) for TiO₂ as a photosensitizer, after doping Yb, Ho, F into TiO₂, it could directly generate reactive oxygen species under an 808 nm laser; the dopants enhanced the absorption under the UV-Vis-NIR region and increased the electron-hole pair separation. (ii) For TiO₂ as the upconversion host, F and Ho also endowed TiO₂:Yb,Ho,F with enhanced upconversion fluorescence under a 980 nm laser and T₂-MRI contrast performance (r₂ = 30.71 mM^-1 s^-1), respectively, thus, facilitating imaging for deep tissues. (iii) The HA shell outside of β-CD prevented the unexpected leaking of DTX, which improved the target abilities and achieved the enzyme-responsive drug release. The in vitro and in vivo studies also demonstrated the nanosystem could efficiently suppress tumor growth by combination therapy and had excellent imaging (UCL/MR) ability. Particularly, our work was the first example that utilized TiO₂ simultaneously as a photosensitizer and upconversion host, which simplified the core-shell UCNP-TiO₂ nanocomposites and reached a "win-win" cooperation in NIR-induced photodynamic therapy and UCL imaging.

Covalent Surface Functionalization of Semiconducting Polymer Dots with β-Cyclodextrin for Fluorescent Ratiometric Assay of Cholesterol through Host-Guest Inclusion and FRET

Special functionalization of semiconducting polymer dots (Pdots) is highly desired to expand their applications in chemo/biosening. Herein, carboxyl-functionalized poly[(9,9-dioctylfluorenyl-2,7-diyl)-co-(1,4-benzo-{2,1',3}-thiadiazole)] dots covalently tagged with aminated β-cyclodextrin (NH₂-CD) have been designed to construct a ratiometric sensor for cholesterol (Cho). Using CD-Pdots as energy donors with rhodamine B (RB) as energy acceptors, a fluorescence resonance energy transfer (FRET) pair has been built because the host-guest interaction between RB and CD attached to Pdots brings donors and acceptors into close proximity. In the presence of Cho, the acceptors will depart from the donors because of the competitive inclusion interaction between Cho and RB with CD, resulting in the hindering of the FRET process between CD-Pdots and RB. On the basis of the turn-on fluorescence of CD-Pdots and turn-off fluorescence of RB, a sensitive ratiometric method for the determination of Cho in the concentration range from 25 to 350 nM with a detection limit of 4.9 nM was achieved. The proposed method was validated to determine free Cho in human serum samples with satisfactory results.

An upconversion fluorescent resonant energy transfer biosensor for hepatitis B virus (HBV) DNA hybridization detection

A novel fluorescent resonant energy transfer (FRET) biosensor was fabricated for the detection of hepatitis B virus (HBV) DNA using poly(ethylenimine) (PEI) modified upconversion nanoparticles (NH2-UCNPs) as energy donor and gold nanoparticles (Au NPs) as acceptor. The PEI modified upconversion nanoparticles were prepared directly with a simple one-pot hydrothermal method, which provides high quality amino-group functionalized UCNPs with uniform morphology and strong upconversion luminescence. Two single-stranded DNA strands, which were partially complementary to each other, were then conjugated with NH2-UCNPs and Au NPs. When DNA conjugated NH2-UCNPs and Au NPs are mixed together, the hybridization between complementary DNA sequences on UCNPs and Au NPs will lead to the quenching of the upconversion luminescence due to the FRET process. Meanwhile, upon the addition of target DNA, Au NPs will leave the surface of the UCNPs and the upconversion luminescence can be restored because of the formation of the more stable double-stranded DNA on the UCNPs. The sensor we fabricated here for target DNA detection shows good sensitivity and high selectivity, which has the potential for clinical applications in the analysis of HBV and other DNA sequences.

Metal-Organic Frameworks Modulated by Doping Er(3+) for Up-Conversion Luminescence

Here we present metal-organic frameworks prepared by a one-step synthesis method, possessing both architectural properties of MOF building and up-conversion luminescence of rare earth Er(3+) (hereafter denoted as Up-MOFs). Up-MOFs have characteristic up-conversion emissions at 520, 540, and 651 nm under the excitation of 980 nm owing to the multiple photon absorption. The up-conversion mechanism of these Up-MOFs has been discussed, and it can be attributed to the excited state absorption process. The design and synthesis of Up-MOF materials possessing near-infrared region excitation and up-conversion luminescence are fully expected to be candidates for the advancement of applications in bioimaging, sensors, optoelectronics, and energy conversion/storage devices.

Titanium Dioxide/Upconversion Nanoparticles/Cadmium Sulfide Nanofibers Enable Enhanced Full-Spectrum Absorption for Superior Solar Light Driven Photocatalysis

In this work, we demonstrate an electrospinning technique to fabricate TiO2 /upconversion nanoparticles (UCNPs)/CdS nanofibers on large scale. In addition, the as-prepared TiO2 nanofibers are incorporated with a high population of UCNPs and CdS nanospheres; this results in Förster resonance energy-transfer configurations of the UCNPs, TiO2 , and CdS nanospheres that are in close proximity. Hence, strong fluorescent emissions for the Tm(3+) ions including the (1) G4 →(3) H6 transition are efficiently transferred to TiO2 and the CdS nanoparticles through an energy-transfer process. The as-prepared TiO2 /UCNPs/CdS nanofibers exhibit full-spectrum solar-energy absorption and enable the efficient degradation of organic dyes by fluorescence resonance energy transfer between the UCNPs and TiO2 (or CdS). The UCNPs/TiO2 /CdS nanofibers may also have enhanced energy-transfer efficiency for wide applications in solar cells, bioimaging, photodynamics, and chemotherapy.

Fluorescent nanoprobes for sensing and imaging of metal ions: recent advances and future perspectives

Recent advances in nanoscale science and technology have generated nanomaterials with unique optical properties. Over the past decade, numerous fluorescent nanoprobes have been developed for highly sensitive and selective sensing and imaging of metal ions, both in vitro and in vivo. In this review, we provide an overview of the recent development of the design and optical properties of the different classes of fluorescent nanoprobes based on noble metal nanomaterials, upconversion nanoparticles, semiconductor quantum dots, and carbon-based nanomaterials. We further detail their application in the detection and quantification of metal ions for environmental monitoring, food safety, medical diagnostics, as well as their use in biomedical imaging in living cells and animals.

Fabrication of a LRET-based upconverting hybrid nanocomposite for turn-on sensing of H2O2 and glucose

Blood glucose detecting has aroused considerable attention because diabetes mellitus has become a worldwide publish health problem. Herein, we construct an exceptionally simple upconverting hybrid nanocomposite, composed of DNA-templated Ag nanoparticles (DNA-AgNPs) and NaYF4:Yb/Tm@NaYF4 core-shell upconversion nanoparticles (UCNPs), for the sensing of H2O2 and glucose. In this design, UCNPs with bared surface act as the donor, and DNA-AgNPs serve as efficient quenchers. DNA-AgNPs can be directly assembled on the bared surface of UCNPs, which further decreases the distance of donor-to-acceptor. The formation of DNA-AgNPs/UCNP nanocomposite results in luminescence quenching of UCNP by DNA-AgNPs through luminescence resonance energy transfer (LRET). Upon H2O2 addition, AgNPs can be etched and transformed into Ag(+), leading to inhibition of the LRET process and causing the recovery of upconversion luminescence. Based on the conversion of glucose into H2O2 by glucose oxidase, the DNA-AgNPs/UCNP nanocomposite can also be exploited for glucose sensing. Moreover, due to the non-autofluorescence offered by UCNPs, the approach developed can be applied to monitor glucose levels in human serum samples with satisfactory results.

New nanoplatforms based on upconversion nanoparticles and single-walled carbon nanohorns for sensitive detection of acute promyelocytic leukemia

New nanoplatforms were prepared by using upconversion nanoparticles as energy donor and single-walled carbon nanohorns as energy acceptor.