Post-annealing reinforced hollow carbon nitride nanospheres for hydrogen photosynthesis

Graphitic Carbon Nitride for Photocatalytic Hydrogen Production from Water Splitting: Nano-Morphological Control and Electronic Band Tailoring

Semiconductor polymeric graphitic carbon nitride (g-C3N4) photocatalysts have garnered significant and rapidly increasing interest in the realm of visible light-driven hydrogen evolution reactions. This interest stems from their straightforward synthesis, ease of functionalization, appealing electronic band structure, high physicochemical and thermal stability, and robust photocatalytic activity. This review starts with the basic principle of photocatalysis and the development history, synthetic strategy, and structural properties of g-C3N4 materials, followed by the rational design and engineering of g-C3N4 from the perspectives of nano-morphological control and electronic band tailoring. Some representative results, including experimental and theoretical calculations, are listed to show the advantages of optimizing the above two characteristics for performance improvement in photocatalytic hydrogen evolution from water splitting. The existing opportunities and challenges of g-C3N4 photocatalysts are outlined to illuminate the developmental trajectory of this field. This paper provides guidance for the preparation of g-C3N4 and to better understand the current state of the art for future research directions.

Ternary ZnS/ZnO/Graphitic Carbon Nitride Heterojunction for Photocatalytic Hydrogen Production

Ternary ZnS/ZnO/graphitic carbon nitride (gCN) photocatalysts were prepared by coupling gCN sheets with ZnO nanorods under solvothermal conditions followed by sulfurization using Na2S. SEM and TEM analyses show that small-sized ZnS particles (ca. 7.2 nm) deposit homogeneously on the surface of ZnO/gCN nanohybrids. Photoluminescence and electrochemical impedance spectroscopy show that ZnS allows for an enhanced charge separation efficiency as well as prolonged lifetime of photogenerated charge carriers, leading to improved hydrogen photoproduction under UV light irradiation compared to ZnO/gCN. Moreover, the deposition of ZnS nanoparticles improves the photostability of the ZnS/ZnO/gCN catalyst for hydrogen production. A double Z-scheme mechanism is proposed for hydrogen photoproduction using the ZnS/ZnO/gCN heterojunction.

Recent advances in ternary Z-scheme photocatalysis on graphitic carbon nitride based photocatalysts

Due to its excellent photocatalytic performance over the last few years, graphitic-like carbon nitride (g-C3N4) has garnered considerable notice as a photocatalyst. Nevertheless, several limitations, including small surface area, the rates at which photo-generated electrons and holes recombine are swift, and the inefficient separation and transport of photoexcited carriers continue to impede its solar energy utilization. To overcome those limitations in single-component g-C3N4, constructing a heterogeneous photocatalytic system has emerged as an effective way. Among the various studies involving the incorporation of hetero composite materials to design heterojunctions, among the most promising approaches is to assemble a Z-scheme photocatalytic configuration. The Z-scheme configuration is essential because it facilitates efficient photocarrier separation and exhibits superior redox ability in separated electrons and holes. Moreover, ternary composites have demonstrated enhanced photocatalytic activities and reinforced photostability. Ternary Z-scheme heterostructures constructed with g-C3N4 possess all the above-mentioned merits and provide a pioneering strategy for implementing photocatalytic systems for environmental and energy sustainability. A summary of the latest technological advancements toward design and fabrication in ternary all-solid-state Z-scheme (ASSZ) and direct Z-scheme (DZ) photocatalysts built on g-C3N4 is presented in this review. Furthermore, the review also discusses the application of ternary Z-scheme photocatalytic architecture established on g-C3N4.

Degradation characteristics of p-nitrophenol and atenolol by carbon nitride modified by graphene quantum dots

Photocatalysis is a promising technology for wastewater treatment. It is of great significance to find catalysts with high photoactivity. In this paper, a catalyst with high photocatalytic degradation efficiency to organic wastewater, carbon nitride modified by graphene quantum dots (SCN-GQDX), is prepared by supramolecular self-assembly thermal polycondensation method and doping graphene quantum dots (GQDs). The results show that SCN-GQD0.5 has the best catalytic performance, and its photocatalytic degradation efficiency to organic pollutants can reach 86% and still remains above 83% after five cycles, which shows the modified carbon nitride has high catalytic efficiency and stability. In a word, SCN-GQDX is a highly efficient, non-toxic and stable photocatalyst for organic pollutants in wastewater.

Self-assembly synthesis of hollow phosphorus-doped graphitic carbon nitride microboxes for the photodegradation of organic pollutants

The rational design of photocatalysts with efficiency and stability is highly desirable but remains challenging. Here, we report a supramolecular self-assembly strategy to construct hollow phosphorus-doped g-C3N4 microboxes (PCNMs). Considering the effects of multiple parameters on the structure and activity of samples, the orthogonal design is innovatively introduced to optimize technology parameters for screening high-performance g-C3N4. Under visible light irradiation (λ ≥ 420 nm), rhodamine B (RhB, 4 mg L-1) is completely degraded in just 80 seconds in the presence of the optimal PCNM. The kinetic rate constant of RhB degradation with the PCNM is 3.4633 min-1, demonstrating unprecedented activity that is about 112 times higher than that of bulk g-C3N4 (0.0309 min-1) synthesized by direct polycondensation of melamine. Additionally, the optimal PCNM also shows enhanced degradation efficiency for tetracycline. The outstanding properties are primarily attributed to the hollow architecture, high specific surface area, and phosphorus doping. This work advances the design of photocatalysts correlating various factors, opening an avenue for optimizing photocatalytic synthesis and activity.

Regulating CO and H2 Ratios in Syngas Produced from Photocatalytic CO2/H2O Reduction by Cu and Co Dual Active Centers on Carbon Nitride Hollow Nanospheres

For photocatalytic CO2 reduction to produce syngas, there are challenges in achieving a high catalytic efficiency and precise control over the product ratio. In this study, two non-noble metal complexes Cobpy and Cubpy (bpy = 2,2'-bipyridine) as cocatalysts for CO2 reduction and hydrogen evolution, respectively, were in situ supported on carbon nitride hollow nanospheres to construct a hybrid system for photocatalytic syngas production. The resulting CO/H2 ratio can be precisely regulated within a wide range of 0:1-9:1 by accurately controlling the content of the two complexes. The presence of the two complexes promotes the migration of photogenerated electrons of the carbon nitride. CO2 can be reduced to CO on the photoreduced species Co(bpy)2+ of Cobpy on CNHS, and H+ can be reduced to H2 on the photoreduced species Cu(bpy)2+ of Cubpy. Furthermore, this method is also applicable to other photocatalysts, such as CdS and TiO2 for generating syngas and regulating product ratios.

Surface-assisted synthesis of biomass carbon-decorated polymer carbon nitride for efficient visible light photocatalytic hydrogen evolution

Template is frequently studied as a structure-directing agent to tune the nanomorphology of photocatalysts. However, the influences of template on the polymerization of precursors and compositions of the resulting samples are rarely considered. Herein, a biomass carbon-modified graphitic carbon nitride (CCNx) with a thin-layer morphology is synthesized via one-pot surface-assisted polymerization of melamine precursor on organic yeast. The formation of the hydrogen bond between melamine and yeast induces a strong interfacial confinement, giving rise to small-sized CCNx. In addition, the carbon materials derived from yeast dramatically broaden n → π* visible light harvesting, improve electron delocalization, and greatly enhance charge carrier separation. The optimized CCNx presents a much higher photocatalytic hydrogen production rate of 2704 μmol g^-1h^-1 under visible light irradiation (λ ≥ 420 nm), which is nearly 11-fold that of its pristine counterpart. This work realizes the synergistic effect between morphology tunning and composition tailoring by using biomass template, which shows a great potential in developing efficient metal-free photocatalysts.

A Targeted Review of Current Progress, Challenges and Future Perspective of g-C3 N4 based Hybrid Photocatalyst Toward Multidimensional Applications

The increasing demand for searching highly efficient and robust technologies in the context of sustainable energy production totally rely onto the cost-effective energy efficient production technologies. Solar power technology in this regard will perceived to be extensively employed in a variety of ways in the future ahead, in terms of the combustion of petroleum-based pollutants, CO₂ reduction, heterogeneous photocatalysis, as well as the formation of unlimited and sustainable hydrogen gas production. Semiconductor-based photocatalysis is regarded as potentially sustainable solution in this context. g-C₃ N₄ is classified as non-metallic semiconductor to overcome this energy demand and enviromental challenges, because of its superior electronic configuration, which has a median band energy of around 2.7 eV, strong photocatalytic stability, and higher light performance. The photocatalytic performance of g-C₃ N₄ is perceived to be inadequate, owing to its small surface area along with high rate of charge recombination. However, various synthetic strategies were applied in order to incorporate g-C₃ N₄ with different guest materials to increase photocatalytic performance. After these fabrication approaches, the photocatalytic activity was enhanced owing to generation of photoinduced electrons and holes, by improving light absorption ability, and boosting surface area, which provides more space for photocatalytic reaction. In this review, various metals, non-metals, metals oxide, sulfides, and ferrites have been integrated with g-C₃ N₄ to form mono, bimetallic, heterojunction, Z-scheme, and S-scheme-based materials for boosting performance. Also, different varieties of g-C₃ N₄ were utilized for different aspects of photocatalytic application i. e., water reduction, water oxidation, CO₂ reduction, and photodegradation of dye pollutants, etc. As a consequence, we have assembled a summary of the latest g-C₃ N₄ based materials, their uses in solar energy adaption, and proper management of the environment. This research will further well explain the detail of the mechanism of all these photocatalytic processes for the next steps, as well as the age number of new insights in order to overcome the current challenges.

Carbon Quantum Dots-Functionalized UiO-66-NH2 Enabling Efficient Infrared Light Conversion of 5-Hydroxymethylfurfuryl with Waste Ethanol into 5-Ethoxymethylfurfural

The catalytic etherification of 5-hydroxymethylfurfural (HMF) with the waste ethanol into high-energy-density 5-ethoxymethylfurfural (EMF) has been considered as a promising way to simultaneously alleviate the energy crisis and environmental pollution. However, the energy consumption is rather high as the synthesis of EMF requires a high temperature to open the etherification reaction. Herein, we demonstrate a clever design and construction of acidified biomass-derived carbon quantum dots (BCQDs)-modified UiO-66-NH₂ that is immobilized on cermasite (H⁺/BCQDs/UiO-66-NH₂@ceramsite), which can use the IR light as driven energy and wasted ethanol to trigger the catalytic conversion of HMF into EMF. The temperature on the surface of the immobilized catalyst could reach as high as 139 °C within 15 min IR irradiation. Due to the aforementioned advantages, the as-prepared catalyst exhibited excellent IR-triggered catalytic performance toward EMF production, where the EMF yields and selectivity were as high as 45% and 65%, respectively. The high catalytic performance originates from the outstanding photo-to-thermal conversion by the introduction of BCQDs, as well as the strong interactions between BCQDs and UiO-66-NH₂ that boosts the etherification reactions. The immobilization of catalyst on cermasite not only benefits catalyst recycling, but more importantly reduces catalyst loss during practical applications. The conceptual study shown here provides new viewpoints in designing energy-effective materials for the conversion of wastes into high-value-added resources.

Recent Progress on Photoelectrochemical Water Splitting of Graphitic Carbon Nitride (g-CN) Electrodes

Graphitic carbon nitride (g-CN), a promising visible-light-responsive semiconductor material, is regarded as a fascinating photocatalyst and heterogeneous catalyst for various reactions due to its non-toxicity, high thermal durability and chemical durability, and "earth-abundant" nature. However, practical applications of g-CN in photoelectrochemical (PEC) and photoelectronic devices are still in the early stages of development due to the difficulties in fabricating high-quality g-CN layers on substrates, wide band gaps, high charge-recombination rates, and low electronic conductivity. Various fabrication and modification strategies of g-CN-based films have been reported. This review summarizes the latest progress related to the growth and modification of high-quality g-CN-based films. Furthermore, (1) the classification of synthetic pathways for the preparation of g-CN films, (2) functionalization of g-CN films at an atomic level (elemental doping) and molecular level (copolymerization), (3) modification of g-CN films with a co-catalyst, and (4) composite films fabricating, will be discussed in detail. Last but not least, this review will conclude with a summary and some invigorating viewpoints on the key challenges and future developments.

Photocatalytic hydrogen evolution based on carbon nitride and organic semiconductors

Photocatalytic hydrogen evolution (PHE) presents a promising way to solve the global energy crisis. Metal-free carbon nitride (CN) and organic semiconductors photocatalysts have drawn intense interests due to their fascinating properties such as tunable molecular structure, electronic states, strong visible-light absorption, low-cost etc. In this paper, the recent progresses of photocatalytic hydrogen production based on organic photocatalysts, including CN, linear polymers, conjugated porous polymers and small molecules, are reviewed, with emphasis on the various strategies to improve PHE efficiency. Finally, the possible future research trends in the organic photocatalysts are prospected.

Uncovering the multifaceted roles of nitrogen defects in graphitic carbon nitride for selective photocatalytic carbon dioxide reduction: a density functional theory study

Surface defect engineering on the nanoscale has attracted extensive research attention lately; however, its role in modulating the properties and catalytic performance of a semiconducting material has not been comprehensively covered. Here, we systematically unraveled the effect of defect engineering towards textural, electronic and optical properties of graphitic carbon nitride (g-C₃N₄), as well as its photocatalytic mechanism of CO₂ reduction using first-principle calculations by density functional theory through the introduction of various defect sites. Among the five unique atoms in g-C₃N₄, the vacancy site was found to be the most feasible at the two-coordinated nitrogen, N2. By initiating N2 point defects, an asymmetric electron density distribution was engendered around the vacancy region, which resulted in an evolution of semiconducting properties. We also discovered an improved charge separation efficiency and CO₂ adsorption affinity in g-C₃N₄, which rendered a more thermodynamically feasible pathway for CO₂ reduction to CO, CH₃OH and CH₄ fuels. This theoretical finding is hoped to shed light on the importance of the defect engineering strategy towards photocatalytic enhancement in g-C₃N₄.

Recent Advancement of the Current Aspects of g-C3 N4 for its Photocatalytic Applications in Sustainable Energy System

Being one of the foremost enticing and intriguing innovations, heterogeneous photocatalysis has also been used to effectively gather, transform, and conserve sustainable sun's radiation for the production of efficient and clean fossil energy as well as a wide range of ecological implications. The generation of solar fuel-based water splitting and CO₂ photoreduction is excellent for generating alternative resources and reducing global warming. Developing an inexpensive photocatalyst can effectively split water into hydrogen (H₂ ), oxygen (O₂ ) sources, and carbon dioxide (CO₂ ) into fuel sources, which is a crucial problem in photocatalysis. The metal-free g-C₃ N₄ photocatalyst has a high solar fuel generation potential. This review covers the most recent advancements in g-C₃ N₄ preparation, including innovative design concepts and new synthesis methods, and novel ideas for expanding the light absorption of pure g-C₃ N₄ for photocatalytic application. Similarly, the main issue concerning research and prospects in photocatalysts based g-C₃ N₄ was also discussed. The current dissertation provides an overview of comprehensive understanding of the exploitation of the extraordinary systemic and characteristics, as well as the fabrication processes and uses of g-C₃ N₄ .

Renewable biomass-derived carbon-supported g-C3N4 doped with Ag for enhanced photocatalytic reduction of CO2

Constructing noble metal-doped g-C₃N₄/carbon composites is a feasible route to overcome the intrinsic drawbacks of pristine g-C₃N₄ for enhanced activity of CO₂ photoreduction. Herein, a novel Ag-doped g-C₃N₄/biomass-derived carbon composite with hollow bird's nest-like (Ag-g-C₃N₄/BN-C) is designed and prepared via a simple yet effective one-step pyrolysis method. In the Ag-g-C₃N₄/BN-C, the highly-dispersed Ag nanoparticles (20-30 nm) with the surface plasmon resonance (SPR) effect act as a significant cocatalyst not only to efficiently trap the photogenerated electrons from g-C₃N₄ to boost the separation of photogenerated electron-hole pairs but also to produce additional active "hot electrons", while the conductive quasi-spherical hollow structure of BN-C doubles the specific surface area with multiple reflections of light, providing abundant active sites and more utilization efficiency of light energy. As a result, the Ag-g-C₃N₄/BN-C exhibits a remarkably enhanced CO evolution rate of 33.3 μmol·g^-1·h^-1 without addition of any sacrificial reagents and photosensitizers, superior to those of both the pristine g-C₃N₄ and many reported g-C₃N₄-based counterparts. The findings of this work demonstrate a good indication for integrating g-C₃N₄ with SPR-dependence noble metal and renewable biomass-derived carbon for enhanced CO₂ photoreduction, which may be extended to modify other semiconductor materials for more photocatalytic applications with enhanced activity.

Graphene quantum dot implanted supramolecular carbon nitrides with robust photocatalytic activity against recalcitrant contaminants

Graphene quantum dot implanted supramolecular carbon nitrides exhibit superior visible-light photocatalytic activity in the degradation of aqueous contaminants of emerging concern.

A simple tactic synthesis of hollow porous graphitic carbon nitride with significantly enhanced photocatalytic performance

Hollow porous graphitic carbon nitride (porous CN) was synthesized via a simple tactic method, and the resulting porous CN showed an effectively modified surface area, crystal structure and enhanced photocatalytic performance. Optical and electrochemical characterization results demonstrated an increase in the charge transfer rate and a decrease in recombination tendency.

Rapid visible-light degradation of EE2 and its estrogenicity in hospital wastewater by crystalline promoted g-C3N4

Metal-free, chemically activated crystalline graphitic carbon nitride (g-C₃N₄) nanorods with enhanced visible-light photoactivity demonstrated rapid photodegradation of 17α-ethinylestradiol (EE2) in water and real hospital wastewater. Pure g-C₃N₄ and another three crystalline promoted g-C₃N₄ photocatalysts developed by hydrothermal method were characterized by, High-Resolution Transmission Electron Microscopy (HRTEM), X-ray diffraction (XRD), Fourier-Transform Infrared spectroscopy (FTIR), Brunauer-Emmett-Teller (BET), Photoluminescence (PL), Electron spin resonance (ESR), X-ray Photoelectron Spectroscopy (XPS) and Diffuse Reflectance Spectroscopy (DRS). Hydrothermal-based chemical activation did not alter the crystal structure, functional group or surface morphology, but it enhanced the specific surface area of activated g-C₃N₄ due to intralayer delamination and depolymerization of g-C₃N₄. Compared to pure g-C₃N₄, the activated g-C₃N₄-3 demonstrated efficient degradation of EE2 (<30 min, 3 mg/l) by visible wavelengths of the solar spectrum. This work provides advanced insight into the construction of heterojunction visible-light photocatalysts and production of O₂^- via reduction of O₂ with photogenerated electrons. Proposed and derived mechanism for photodegradation of EE2 by g-C₃N₄-3 using gas chromatography-mass spectrometry (GCMS). Yeast Estrogen Screen (YES) was performed to evaluate the estrogenicity of treated water samples. Efficient removal of EE2 estrogenic activity (<45 min, 3 mg/l) was achieved using the visible light-activated g-C₃N₄. Estrogenicity removal rate corresponded well with EE2-degradation rate.

Covalent Triazine Framework Nanoparticles via Size-Controllable Confinement Synthesis for Enhanced Visible-Light Photoredox Catalysis

For metal-free, organic conjugated polymer-based photocatalysts, synthesis of defined nanostructures is still highly challenging. Here, we report the formation of covalent triazine framework (CTF) nanoparticles via a size-controllable confined polymerization strategy. The uniform CTF nanoparticles exhibited significantly enhanced activity in the photocatalytic formation of dibenzofurans compared to the irregular bulk material. The optoelectronic properties of the nanometer-sized CTFs could be easily tuned by copolymerizing small amounts of benzothiadiazole into the conjugated molecular network. This optimization of electronic properties led to a further increase in observed photocatalytic efficiency, resulting in total an 18-fold enhancement compared to the bulk material. Full recyclability of the heterogeneous photocatalysts as well as catalytic activity in dehalogenation, hydroxylation and benzoimidazole formation reactions demonstrated the utility of the designed materials.

Phenyl-Bridged Graphitic Carbon Nitride with a Porous and Hollow Sphere Structure to Enhance Dissociation of Photogenerated Charge Carriers and Visible-Light-Driven H2 Generation

Graphitic carbon nitride (CN) suffers from rapid recombination of photoexcited charges due to the existing highly symmetrical tri-s-triazine ring and long charge diffusion path, resulting in moderate photocatalytic activity. The bridged phenyl embedded in the CN structure was used to reduce the symmetry of the tri-s-triazine ring. In addition, the CN material was constructed with a porous and hollow sphere structure to shorten the diffusion path of charge carriers. Herein, simple thermal polymerization of a trimesic acid-doped melamine-cyanuric acid (MCA) supramolecular was employed to construct phenyl-bridged graphitic carbon nitride (Ph-CN-MCA) with a hollow sphere structure composed of porous nanosheets for visible-light catalytic H₂ evolution. The porous and hollow sphere-structured Ph-CN-MCA possessed increased degree of polymerization, more negative conduction band potential, enlarged Brunauer-Emmett-Teller (BET) surface area, and shortened charge diffusion path. In addition, bridged phenyl embedded in the Ph-CN-MCA structure not only accelerated the dissociation of photogenerated carriers but also narrowed the band gap and extended the visible-light absorption. Further, the separated highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) of Ph-CN-MCA facilitated the spatial dissociation of photogenerated charges, which was also confirmed by theoretical calculations. As a consequence, compared with the reference CN-MA catalyst prepared from melamine, Ph-CN-MCA showed approximately 48.42 times the photocatalytic H₂ evolution under visible-light irradiation. The developed synthetic method herein highlights that phenyl-bridged graphitic carbon nitride with a porous and hollow sphere structure could provide an efficient platform to boost the dissociation of photoexcited charge carriers and photocatalytic H₂ evolution.

ZnIn2S4 grown on nitrogen-doped hollow carbon spheres: An advanced catalyst for Cr(VI) reduction

Up to now, the environmental damage by heavy metal is getting worse and worse as the development of industry. Meanwhile, hexavalent chromium (Cr(VI)) in wastewater get special attention as its acute toxicity and potential carcinogencity. To solve this problem, we introduce a simple and efficient way to prepare a photocatalyst, ZnIn₂S₄ grown on nitrogen-doped hollow carbon spheres (ZIS-NHC), which is an effective catalyst that can used to reduce aqueous Cr(VI). This photocatalyst prepared by a three-step strategy. Benefiting from the excellent electrical conductivity and high specific surface area of the NHC which is superior to other carbon material and the favorable band gap of ZnIn₂S₄ makes ZIS-NHC has superior light-driven photocatalytic efficiency. The ZIS-NHC exhibits an excellent rate of degradation of aqueous Cr(VI) at a concentration of 50 mg/L within 50 min. Moreover, the ZIS-NHC retained excellent stability after five rounds of cycling experiments which was also discussed.

Bio-inspired honeycomb-like graphitic carbon nitride for enhanced visible light photocatalytic CO2 reduction activity

Graphitic carbon nitride (g-C₃N₄) is paying attention lately owing to its interesting characteristics and substantial application in improving environmental and energy concerns. Nevertheless, the photocatalytic activity of g-C₃N₄ is constrained by the inertness of the surface and particle aggregation during photocatalytic activity. Herein, we report the preparation of g-C₃N₄ with honeycomb-like morphology (HC-C₃N₄) via thermal condensation of prepared SiO₂ templates and dicyandiamide. The etching out of the SiO₂ templates by NH₄HF₂ created hollow or macropores in the C₃N₄ matrix resulting in its structural changes. Similar, to the bulk C₃N₄, the HC-C₃N₄ exhibited higher photocatalytic CO₂ reduction in hydrocarbons. This improved photocatalytic achievement is associated with higher specific surface area, excellent visible light absorption capability, higher electron donor density, easy mass diffusion of materials for surface reaction, and effective segregation of photogenerated charge carriers. Furthermore, the HC-C₃N₄ honeycomb structure was deposited with Ni(OH)₂ clusters which showed remarkable CO₂ reduction activity of 1.48 μmolh^-1 g^-1 of CH₄ and 0.73 μmolh^-1 g^-1 of CH₃OH generation which is 3.5 and 4.3 times higher CO₂ reduction activity compared with bulk C₃N₄ clustered with Ni(OH)₂ particles. This comprehensive study demonstrated that HC-C₃N₄ nanostructured polymeric semiconductor is envisaged to have great potential in the application of a variety of fields such as photocatalysis, sensor technology, and nanotechnology.

Facile fabrication of silver iodide/graphitic carbon nitride nanocomposites by notable photo-catalytic performance through sunlight and antimicrobial activity

Silver iodide/graphitic carbon nitride nanocomposites have been successfully fabricated through sonication-assisted deposition-precipitation route at room temperature and hydrothermal method. Varied mass ratios and preparation processes can modify the structure, purity, shape, and scale of specimens. The purity of the product was confirmed by Energy Dispersive X-Ray Spectroscopy (EDS) and X-ray crystallography. The morphology and size of specimens could be observed with transmission electron microscopy (TEM) and field emission scanning electron microscopy (FESEM). The bandgap was evaluated around 2.82 eV for pure g-C₃N₄. The bandgap has reduced to 2.70 eV by increasing the quantity of silver iodide in the nanocomposites. The photocatalytic activity of AgI/C₃N₄ has been studied over the destruction of rhodamine B (RhB) and methyl orange (MO) through visible radiation due to their suitable bandgap. The as-prepared AgI/C₃N₄ nanocomposites photocatalyst revealed better photocatalytic behavior than the genuine AgI and C₃N₄ which ascribed to synergic impacts at the interconnection of C₃N₄ and AgI. Furthermore, these nanocomposites have great potential for being a great antibacterial agent.

Nickel-decorated g-C3N4 hollow spheres as an efficient photocatalyst for hydrogen evolution and oxidation of amines to imines

Photocatalysts composed of earth-abundant elements are highly desired for photocatalytic hydrogen evolution as well as oxidation of amines to imines without the requirement of precious metals.

Phosphating 2D CoAl LDH anchored on 3D self-assembled NiTiO3 hollow rods for efficient hydrogen evolution

Two photo-active materials with opposite potential, NiTiO₃ and CoAl LDH are rationally integrated into a combinant. It efficiently accelerates the separation and migration of photo-excited electrons and enhance thermodynamic hydrogen evolution.

Influence of MoS2 on Activity and Stability of Carbon Nitride in Photocatalytic Hydrogen Production

MoS2/C3N4 (MS-CN) composite photocatalysts have been synthesized by three different methods, i.e., in situ-photodeposition, sonochemical, and thermal decomposition. The crystal structure, optical properties, chemical composition, microstructure, and electron transfer properties were investigated by X-ray diffraction, UV-vis diffuse reflectance spectroyscopy, X-ray photoelectron spectroscopy, electron microscopy, photoluminescence, and in situ electron paramagnetic resonance spectroscopy. During photodeposition, the 2H MoS2 phase was formed upon reduction of [MoS4]2− by photogenerated conduction band electrons and then deposited on the surface of CN. A thin crystalline layer of 2H MoS2 formed an intimate interfacial contact with CN that favors charge separation and enhances the photocatalytic activity. The 2H MS-CN phase showed the highest photocatalytic H2 evolution rate (2342 μmol h−1 g−1, 25 mg catalyst/reaction) under UV-vis light irradiation in the presence of lactic acid as sacrificial reagent and Pt as cocatalyst.

Visible-light-driven photoreduction of CO2 to CO over porous nitrogen-deficient carbon nitride nanotubes

The solar energy-driven photoreduction of CO₂ with H₂O to hydrocarbon fuels is an interesting but challenging topic.

Synthesis of Bi2O3/g-C3N4 for enhanced photocatalytic CO2 reduction with a Z-scheme mechanism

Bi₂O₃/g-C₃N₄ nanoscale composites with a Z-scheme mechanism were successfully synthesized by high temperature calcination combined with a hydrothermal method. These synthesized composites exhibited excellent photocatalytic performance, especially the 40 wt% Bi₂O₃/g-C₃N₄ composite, which produced about 1.8 times the CO yield of pure g-C₃N₄. The obtained products were characterized by X-ray diffraction (XRD) patterns, X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM), transmission electron microscopy (TEM), Brunauer–Emmett–Teller (BET), UV-vis diffuse reflectance spectroscopy (UV-vis DRS) and so on. Characterization results revealed that Bi ions had well covered the surface of g-C₃N₄, thus restraining the recombination of electron–hole pairs and resulting in a stronger visible-light response and higher CO yield. In addition, the electron transfer process through the Z-scheme mechanism also promoted the photocatalytic activity.

Bi₂O₃/g-C₃N₄ composites were synthesized and used in photocatalytic reduction of CO₂ with a Z-scheme mechanism.

Construction of novel Ag/HKUST-1/g-C3N4 towards enhanced photocatalytic activity for the degradation of pollutants under visible light

A novel Ag/metal–organic framework/graphitic carbon nitride (Ag/HKUST-1/g-C₃N₄, AHC) photocatalyst was prepared via an in situ growth strategy and photo-deposition technique for environmental remediation. The as-obtained samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), N₂ adsorption–desorption isotherm measurement, UV-vis diffuse reflection spectroscopy (UV-vis DRS), and photoluminescence (PL) spectroscopy. The results indicated that the hybrids have large surface area, mesoporous structure and enhanced visible-light absorption. The as-prepared hybrid samples exhibited considerable improvement in photocatalytic activity and stability for rhodamine B (RhB) degradation under visible light irradiation (λ > 420 nm). In addition, they also have good adsorption properties. Compared to the pure g-C₃N₄ and Ag/g-C₃N₄, the 5% AHC photocatalyst showed superior photocatalytic activity. Moreover, 5% AHC exhibits good photocatalytic activity even after four cycles. Additionally, the active species trapping and electron spin resonance (ESR) experiments indicated that h⁺ and ·OH were the main active species.

A novel AHC photocatalyst was prepared via in situ growth strategy and photo-deposition technique. The as-prepared hybrid samples have good photocatalytic activity and stability for Rh B degradation under visible-light irradiation.

Ferroelectric enhanced Z-scheme P-doped g-C3N4/PANI/BaTiO3 ternary heterojunction with boosted visible-light photocatalytic water splitting

Surface polarization promotes the charge separation efficiency of PCN/PANI/BTO ternary heterojunction, resulting in an enhanced visible-light photocatalytic hydrogen production activity.

A thiophene-modified doubleshell hollow g-C3N4 nanosphere boosts NADH regeneration via synergistic enhancement of charge excitation and separation

ATCN-DSCN enabled boosted NADH photo-regeneration and FDH-assisted CO₂ reduction.

Thermal annealing-induced structural reorganization in polymeric photocatalysts for enhanced hydrogen evolution

Facile reorganization of a conjugated triazine-based polymer structure has been adopted to optimize its optical, electronic, and photocatalytic properties.

Nanopore enriched hollow carbon nitride nanospheres with extremely high visible-light photocatalytic activity in the degradation of aqueous contaminants of emerging concern

Nanopore enriched hollow carbon nitride nanospheres exhibit extremely high visible-light photocatalytic activity in the degradation of aqueous contaminants of emerging concern.

Constructing Highly Uniform Onion-Ring-like Graphitic Carbon Nitride for Efficient Visible-Light-Driven Photocatalytic Hydrogen Evolution

The introduction of microstructure to the metal-free graphitic carbon nitride (g-C₃N₄) photocatalyst holds promise in enhancing its catalytic performance. However, producing such microstructured g-C₃N₄ remains technically challenging due to a complicated synthetic process and high cost. In this study, we develop a facile and in-air chemical vapor deposition (CVD) method that produces onion-ring-like g-C₃N₄ microstructures in a simple, reliable, and economical manner. This method involves the use of randomly packed 350 nm SiO₂ microspheres as a hard template and melamine as a CVD precursor for the deposition of a thin layer of g-C₃N₄ in the narrow space between the SiO₂ microspheres. After dissolution of the microsphere template, the resultant g-C₃N₄ exhibits uniquely uniform onion-ring-like microstructures. Unlike previously reported g-C₃N₄ powder morphologies that show various degrees of agglomeration and irregularity, the onion-ring-like g-C₃N₄ is highly dispersed and uniform. The calculated band gap for onion-ring-like g-C₃N₄ is 2.58 eV, which is significantly narrower than that of bulk g-C₃N₄ at 2.70 eV. Experimental characterization and testing suggest that, in comparison with bulk g-C₃N₄, onion-ring-like g-C₃N₄ facilitates charge separation, extends the lifetime of photoinduced carriers, exhibits 5-fold higher photocatalytic hydrogen evolution, and shows great potential for photocatalytic applications.

Controllable synthesis of graphitic carbon nitride nanomaterials for solar energy conversion and environmental remediation: the road travelled and the way forward

This review discusses advances in the synthesis and design of g-C₃N₄-based nanomaterials and their various photocatalytic and photoredox applications.

Z-Scheme MoS2/g-C3N4 heterojunction for efficient visible light photocatalytic CO2 reduction

Z-Scheme MoS₂/g-C₃N₄ heterojunction photocatalysts were fabricated using a hydrothermal deposition procedure together with a calcination route, and then applied for CO₂ photoreduction.