Influence of the carrier concentration on the piezotronic effect in a ZnO/Au Schottky junction

Theoretical model investigating the magnetic properties of cobalt-doped ZnO

We propose a theoretical model to investigate the magnetic properties of cobalt-doped ZnO (ZnO:Co) thin films qualitatively. The model was built on the dilute Co dopants in the host of ZnO forming the magnetic Co⁺² ions and the energy level of the magnetic ions crossing the band edge of ZnO resulting in a magnetic interaction between the Co⁺² spins and the spins of the electrons from the conduction band of ZnO. The mechanism of the ferromagnetism revealed in the studied system is proposed here to be induced not only by the mediated conducting electrons via spin interactions but also by the Coulomb excitations, arising from the electrons localized by the oxygen vacancies. This approach of including Coulomb excitation in the modified carrier-mediated model could explain well the magnetic properties of ZnO:Co and solves the drawback of the carrier-mediated model in interpreting the appearance of ferromagnetism in the insulating ZnO:Co. We propose that the Coulomb excitations induced by the electrons captured by the oxygen vacancies are an essential element in the magnetic ZnO, which reveals the fact that the bound magnetic polaron model without considering the Coulomb excitation is insufficient to describe the magnetic properties of ZnO.

Crystallography at the nanoscale: planar defects in ZnO nanospikes

The examination of anisotropic nanostructures, such as wires, platelets or spikes, inside a transmission electron microscope is normally performed only in plan view. However, intrinsic defects such as growth twin interfaces could occasionally be concealed from direct observation for geometric reasons, leading to superposition. This article presents the shadow-focused ion-beam technique to prepare multiple electron-beam-transparent cross-section specimens of ZnO nanospikes, via a procedure which could be readily extended to other anisotropic structures. In contrast with plan-view data of the same nanospikes, here the viewing direction allows the examination of defects without superposition. By this method, the coexistence of two twin configurations inside the wurtzite-type structure is observed, namely and , which were not identified during the plan-view observations owing to superposition of the domains. The defect arrangement could be the result of coalescence twinning of crystalline nuclei formed on the partially molten Zn substrate during the flame-transport synthesis. Three-dimensional defect models of the twin interface structures have been derived and are correlated with the plan-view investigations by simulation.

Nanogenerators as a Sustainable Power Source: State of Art, Applications, and Challenges

A sustainable power source to meet the needs of energy requirement is very much essential in modern society as the conventional sources are depleting. Bioenergy, hydropower, solar, and wind are some of the well-established renewable energy sources that help to attain the need for energy at mega to gigawatts power scale. Nanogenerators based on nano energy are the growing technology that facilitate self-powered systems, sensors, and flexible and portable electronics in the booming era of IoT (Internet of Things). The nanogenerators can harvest small-scale energy from the ambient nature and surroundings for efficient utilization. The nanogenerators were based on piezo, tribo, and pyroelectric effect, and the first of its kind was developed in the year 2006 by Wang et al. The invention of nanogenerators is a breakthrough in the field of ambient energy-harvesting techniques as they are lightweight, easily fabricated, sustainable, and care-free systems. In this paper, a comprehensive review on fundamentals, performance, recent developments, and application of nanogenerators in self-powered sensors, wind energy harvesting, blue energy harvesting, and its integration with solar photovoltaics are discussed. Finally, the outlook and challenges in the growth of this technology are also outlined.

Layer Dependence and Light Tuning Surface Potential of 2D MoS2 on Various Substrates

Here surface potential of chemical vapor deposition (CVD) grown 2D MoS₂ with various layers is reported, and the effect of adherent substrate and light illumination on surface potential of monolayer MoS₂ are investigated. The surface potential of MoS₂ on Si/SiO₂ substrate decreases from 4.93 to 4.84 eV with the increase in the number of layer from 1 to 4 or more. Especially, the surface potentials of monolayer MoS₂ are strongly dependent on its adherent substrate, which are determined to be 4.55, 4.88, 4.93, 5.10, and 5.50 eV on Ag, graphene, Si/SiO₂ , Au, and Pt substrates, respectively. Light irradiation is introduced to tuning the surface potential of monolayer MoS₂ , with the increase in light intensity, the surface potential of MoS₂ on Si/SiO₂ substrate decreases from 4.93 to 4.74 eV, while increases from 5.50 to 5.56 eV on Pt substrate. The I-V curves on vertical of monolayer MoS₂ /Pt heterojunction show the decrease in current with the increase of light intensity, and Schottky barrier height at MoS₂ /Pt junctions increases from 0.302 to 0.342 eV. The changed surface potential can be explained by trapped charges on surface, photoinduced carriers, charge transfer, and local electric field.

A retrospect on the role of piezoelectric nanogenerators in the development of the green world

This paper gives a detailed report of the evolution and potential applications of piezoelectric nanogenerators (PENGs).

Preventing probe induced topography correlated artifacts in Kelvin Probe Force Microscopy

Kelvin Probe Force Microscopy (KPFM) on samples with rough surface topography can be hindered by topography correlated artifacts. We show that, with the proper experimental configuration and using homogeneously metal coated probes, we are able to obtain amplitude modulation (AM) KPFM results on a gold coated sample with rough topography that are free from such artifacts. By inducing tip inhomogeneity through contact with the sample, clear potential variations appear in the KPFM image, which correlate with the surface topography and, thus, are probe induced artifacts. We find that switching to frequency modulation (FM) KPFM with such altered probes does not remove these artifacts. We also find that the induced tip inhomogeneity causes a lift height dependence of the KPFM measurement, which can therefore be used as a check for the presence of probe induced topography correlated artifacts. We attribute the observed effects to a work function difference between the tip and the rest of the probe and describe a model for such inhomogeneous probes that predicts lift height dependence and topography correlated artifacts for both AM and FM-KPFM methods. This work demonstrates that using a probe with a homogeneous work function and preventing tip changes is essential for KPFM on non-flat samples. From the three investigated probe coatings, PtIr, Au and TiN, the latter appears to be the most suitable, because of its better resistance against coating damage.

High-efficiency sono-solar-induced degradation of organic dye by the piezophototronic/photocatalytic coupling effect of FeS/ZnO nanoarrays

Highly-efficient sono-solar-induced degradation of organic dye by the piezophototronic/photocatalytic coupling effect of FeS/ZnO nanoarrays was achieved. A steel screen was used as the substrate for supporting FeS/ZnO nanoarrays, and the nanoarrays were vertically and uniformly grown on the substrate via a wet-chemical route. Under ultrasonic and solar irradiation, FeS/ZnO nanoarrays have high sono-photocatalytic activity for degrading methylene blue in water. The photogenerated carriers can be separated by a piezoelectric field and a built-in electric field, resulting in a low recombination rate and high photocatalytic efficiency. The piezophototronic and photocatalytic effects were coupled together. The experimental/theoretical data indicate that this novel wastewater treatment can co-use mechanical and solar energy in nature, and so is a promising technology for environment improvement.

Enhanced electromechanical performance in metal–MgO–ZnO tunneling diodes due to the insulator layers

The enhanced electromechanical performance of metal–MgO–ZnO MISTDs is due to the highly strain sensitive energy barriers.