Mixed non-covalent assemblies of ethynyl nile red and ethynyl pyrene along oligonucleotide templates

Aggregation-induced emission by sequence-selective assembly of cyanolytated distyrylbenzene in supramolecular DNA architectures

The cyanolated distyrylbenzene conjugated to 2’-deoxyuridine is a new building block for supramolecular DNA architectures combining aggregation-induced emission and sequence-selective binding. A high number of binding sites at the DNA...

DNA-templated control of chirality and efficient energy transport in supramolecular DNA architectures with aggregation-induced emission

Two conjugates of tetraphenylethylene with d-2′-deoxyuridine (1d) and l-2′-deoxyuridine (1l) were synthesized to construct new supramolecular DNA-architectures by self-assembly. The non-templated assemblies of 1d and 1l show strong aggregation-induced emission and their chirality is exclusively controlled by the configuration of their sugar part. In contrast, the chirality of the DNA-templated assemblies is governed by the configuration of the DNA, and there is no configuration-selective binding of 1d to d-A₂₀ and 1l to l-A₂₀. The quantum yield of the assembly of 1d along the single-stranded DNA A₂₀ is 0.40; approximately every second available binding site on the DNA template is occupied by 1d. The strong aggregation-induced emission of these DNA architectures can be efficiently quenched and the excitation energy can be transported to Atto dyes at the 5′-terminus. A multistep energy transport “hopping” precedes the final energy transfer to the terminal acceptor. The building block 1d promotes this energy transport as stepping stones. This was elucidated by reference DNA double strands in which 1d was covalently incorporated at two distinct sites in the sequences, one near the Atto dye, and one farther away. This new type of completely self-assembled supramolecular DNA architecture is hierarchically ordered and the DNA template controls not only the binding but also the energy transport properties. The high intensity of the aggregation-induced emission and the excellent energy transport properties make these DNA-based materials promising candidates for optoelectronic applications.

DNA architectures with tetraphenylethylene are assembled in a non-covalent way. The strong aggregation-induced emission of the chromophores is quenched and the energy is transported to Atto dyes by a multistep energy “hopping”.

Molecular Chromophore-DNA Architectures With Fullerenes: Optical Properties and Solar Cells

Supramolecular chemistry allows the construction of complex molecular architectures and the design of collective photophysical properties. DNA is an attractive template to build such supramolecular architectures due to its helical structure, the defined distances between the bases and the canonical base pairing that results in precise control of the chromophore position. The tailored properties of DNA-templated supramolecules eventually allow their implementation into optoelectronic applications. For the generation of free charge carriers from photo-generated excitons, fullerenes can be utilized. We synthesized two fullerene derivates, one of which binds by electrostatic interactions to single-stranded DNA, while the other contains two 2'-deoxyuridine moieties and assembles specifically along oligo-2'-deoxyadenosines (dA20) as DNA template. The DNA-directed assembly of both fullerenes in aqueous solution was investigated by UV/Vis absorbance and circular dichroism (CD) spectroscopy. The specific interactions with DNA make fullerenes with the 2'-deoxyuridine moieties a significantly better component for supramolecular DNA architectures. We studied the fluorescence quenching of both fullerenes with a DNA chromophore assembly. To investigate one of the key properties for optoelectronic applications, that is the supramolecular structure of the DNA-based assemblies in the solid phase, we characterized the CD of supramolecular chromophore-DNA architectures in thin films. Remarkably, the helical chirality of the chromophore assemblies that is induced by the DNA template is conserved even in the solid state. Upon implementation into organic solar cells, the external quantum efficiency measurements showed charge carrier generation on all three chromophore components of the DNA assemblies. The fullerenes with the 2'-deoxyuridine moieties enhance the quantum efficiency of the conversion process significantly, demonstrating the potential of DNA as structural element for ordering chromophores into functional π-systems, which may be employed in future organic solar cells.

From Interaction to Function in DNA-Templated Supramolecular Self-Assemblies

DNA-templated self-assembly represents a rich and growing subset of supramolecular chemistry where functional self-assemblies are programmed in a versatile manner using nucleic acids as readily-available and readily-tunable templates. In this review, we summarize the different DNA recognition modes and the basic supramolecular interactions at play in this context. We discuss the recent results that report the DNA-templated self-assembly of small molecules into complex yet precise nanoarrays, going from 1D to 3D architectures. Finally, we show their emerging functions as photonic/electronic nanowires, sensors, gene delivery vectors, and supramolecular catalysts, and their growing applications in a wide range of area from materials to biological sciences.

Synthetic strategies tailoring colours in multichromophoric organic nanostructures

Mimicking nature to develop light-harvesting materials is a timely challenge. This tutorial review examines the chemical strategies to engineer and customise innovative multi-coloured architectures with specific light-absorbing and emitting properties.

Luminescent pyrenyl-GNA nucleosides: synthesis, photophysics and confocal microscopy studies in cancer HeLa cells

Glycol nucleic acids (GNA) are synthetic genetic-like polymers with an acyclic three-carbon propylene glycol phosphodiester backbone. Here, synthesis, luminescence properties, circular dichroism (CD) spectra, and confocal microscopy speciation studies of (R,S) and (S,R) pyrenyl-GNA (pyr-GNA) nucleosides are reported in HeLa cells. Enantiomerically pure nucleosides were obtained by a Sharpless asymmetric dihydroxylation reaction followed by semi-preparative high-performance liquid chromatography (HPLC) separation using Amylose-2 as the chiral stationary phase. The enantiomeric relationship between stereoisomers was confirmed by CD spectra, and the absolute configurations were assigned based on experimental and theoretical CD spectra comparisons. The pyr-GNA nucleosides were not cytotoxic against human cervical (HeLa) cancer cells and thus were utilized as luminescent probes in the imaging of these cells with confocal microscopy. Cellular staining patterns were identical for both enantiomers in HeLa cells. Compounds showed no photocytotoxic effect and were localized in the lipid membranes of the mitochondria, in cellular vesicles and in other lipid cellular compartments. The overall distribution of the pyrene and pyrenyl-GNA nucleosides inside the living HeLa cells differed, since the former compound gives a more granular staining pattern and the latter a more diffuse one.

Influences of Linker and Nucleoside for the Helical Self-Assembly of Perylene Along DNA Templates

Six different conjugates of perylene with 2'-deoxyuridine and with 2-amino-2'-deoxyadenosine were synthesized and applied for DNA-templated assembly in aqueous buffer solutions. They differ by the linkers ethynylene, phenylene, and phenylene-ethynylene between nucleoside and chromophore. The nucleosides were investigated as monomers in CHCl₃ and dimethyl sulfoxide by optical spectroscopy. The properties of the four phenylene-linked conjugates are similar to that of perylene as reference because these linkers separate both aromatic parts. The ethynylene linker electronically couples the chromophore with the respective nucleoside and thus red shifts the absorbance. The DNA-templated assembly properties were elucidated by mixing the templates in aqueous buffer with the perylene-nucleoside conjugates from a dimethyl sulfoxide stock solution. Specific binding of the nucleosides was probed by comparing the results with dA₂₀ and T₂₀ as single-stranded DNA templates. Our studies reveal the structural parameters that are important for the DNA-templated assembly of perylenes. First, perylene-2'-deoxyuridine conjugates do not form DNA-templated helical assemblies, regardless of the choice of linker. Second, the ethynylene linker is crucial for successful DNA-templated chromophore assemblies of perylene-2-amino-2'-deoxyadenosine conjugates. Third, in contrast, the phenylene linker inhibits self-assembly along single-stranded DNA templates. In conclusion, the 2-amino-2'-deoxyadenosin in combination with the ethynylene linker provides the best structural feature for specific and helical DNA-templated assembly of perylenes. This result is important for the design of future DNA-based supramolecular architectures with chromophores, in particular DNA-based light-harvesting systems and DNA systems for emitting or sensing circularly polarized luminescence.

Bis(merocyanine) Hetero-Folda-Dimers: Evaluation of Exciton Coupling between Different Types of π-Stacked Chromphores

Exciton coupling between different types of chromophores has been rarely investigated. Herein, a systematic study on the exciton coupling between merocyanine chromophores of different conjugation length with varying excited state energies is presented. In this work well-defined hetero-dimer stacks were obtained upon folding of bis(merocyanine) dyes in nonpolar solvents. They show distinctly different absorption properties in comparison with the spectra of the single chromophores, revealing a significant coupling between the different chromophores. The simulated absorption spectra obtained from time-dependent density functional theory (TD-DFT) calculations are in good agreement with the experimental spectra. Our theoretical analysis based on an extension of Kasha's exciton theory discloses strong coupling between the dyes' transition dipole moments despite of an excited-state energy difference of 0.60 eV between the chromophores.

Control of helical chirality in supramolecular chromophore-DNA architectures

Four different d- and l-configured chromophore-2'-deoxyuridine conjugates were applied to elucidate the helical chirality of their non-covalent assemblies along the d- and l-configured DNA templates by optical spectroscopy. There is no configuration-selective recognition between these nucleosides and the DNA templates. The helicity of the DNA assemblies is either controlled by the configuration of the DNA template or by the nucleoside configuration.

Resonance Energy Transfer in a Genetically Engineered Polypeptide Results in Unanticipated Fluorescence Intensity

The fluorescence intensity of a C-terminal acceptor chromophore, N-(7-dimethylamino-4-methyl coumarin (DACM), increased proportionally with 280 nm irradiation of an increasing number of donor tryptophan residues located on a β-sheet forming polypeptide. The fluorescence intensity of the acceptor chromophore increased even as the length of the β-sheet edge approached 256 Å, well beyond the Förster radius for the tryptophan-acceptor chromophore pair. The folding of the peptides under investigation was verified by circular dichroism (CD) and deep UV resonance Raman experiments. Control experiments showed that the enhancement of DACM fluorescence occurred concomitantly with peptide folding. In other control experiments, the DACM fluorescence intensity of the solutions of tryptophan and DACM did not show any enhancement of DACM fluorescence with increasing tryptophan concentrations. Formation of fibrillar aggregates of the substrate peptides prepared for the fluorescence studies was undetectable by thioflavin T (ThT) fluorescence.

Self-Assembled Porphyrazine Nucleosides on DNA Templates: Highly Fluorescent Chromophore Arrays and Sizing Forensic Tandem Repeat Sequences

The formation of chromophore arrays using a DNA templating approach leads to the creation of supramolecular assemblies, where the optical properties of the overall system can be fine-tuned to a large extent. In particular, porphyrin derivatives have been shown to be versatile building blocks; mostly covalent chemistry was used for embedding the units into DNA strands. Self-assembly of porphyrin modified nucleosides, on the other hand, has not been investigated as a simplified approach. We report on the synthesis of a magnesium(II) tetraaza porphine (MgTAP) coupled to deoxyuridine, and array formation on DNA templates which contain well-defined oligo(dA) segments showing strong fluorescence enhancement which is significantly larger than that with a Zn-porphyrin. The use of the deep-eutectic solvent glycholine is essential for successful assembly formation. The system allows for sizing of short tandem repeat markers with multiple adenosines, thus the concept could be adaptable to in vitro forensic DNA profiling with a suitable set of different chromophores on all nucleosides.

Pyrene-nucleobase conjugates: synthesis, oligonucleotide binding and confocal bioimaging studies

Fluorescent pyrene–linker–nucleobase (nucleobase = thymine, adenine) conjugates with carbonyl and hydroxy functionalities in the linker were synthesized and characterized. X-ray single-crystal structure analysis performed for the pyrene–C(O)CH₂CH₂–thymine (2) conjugate reveals dimers of molecules 2 stabilized by hydrogen bonds between the thymine moieties. The photochemical characterization showed structure-dependent fluorescence properties of the investigated compounds. The conjugates bearing a carbonyl function represent weak emitters as compared to compounds with a hydroxy function in the linker. The self-assembly properties of pyrene nucleobases were investigated in respect to their binding to single and double strand oligonucleotides in water and in buffer solution. In respect to the complementary oligothymidine T₁₀ template in water, compounds 3 and 5 both show a self-assembling behavior according to canonical base–base pairing. However, in buffer solution, derivative 5 was much more effective than 3 in binding to the T₁₀ template. Furthermore the adenine derivative 5 binds to the double-stranded (dA)₁₀–T₁₀ template with a self-assembly ratio of 112%. Such a high value of a self-assembly ratio can be rationalized by a triple-helix-like binding, intercalation, or a mixture of both. Remarkably, compound 5 also shows dual staining pattern in living HeLa cells. Confocal microscopy confirmed that 5 predominantly stains mitochondria but it also accumulates in the nucleoli of the cells.

Structural and quantum chemical analysis of exciton coupling in homo- and heteroaggregate stacks of merocyanines

Exciton coupling is of fundamental importance and determines functional properties of organic dyes in (opto-)electronic and photovoltaic devices. Here we show that strong exciton coupling is not limited to the situation of equal chromophores as often assumed. Quadruple dye stacks were obtained from two bis(merocyanine) dyes with same or different chromophores, respectively, which dimerize in less-polar solvents resulting in the respective homo- and heteroaggregates. The structures of the quadruple dye stacks were assigned by NMR techniques and unambiguously confirmed by single-crystal X-ray analysis. The heteroaggregate stack formed from the bis(merocyanine) bearing two different chromophores exhibits remarkably different ultraviolet/vis absorption bands compared with those of the homoaggregate of the bis(merocyanine) comprising two identical chromophores. Quantum chemical analysis based on an extension of Kasha's exciton theory appropriately describes the absorption properties of both types of stacks revealing strong exciton coupling also between different chromophores within the heteroaggregate.

Exciton coupling between organic dyes is important for opto-electronic and photovoltaic devices and it is well-known that strong coupling occurs between equal chromophores. Here, Würthner and others show quadruple dye stacks that have strong exciton coupling between different chromophores within a heteroaggregate.

Efficient synthesis of fluorescent alkynyl C-nucleosides via Sonogashira coupling for the preparation of DNA-based polyfluorophores

A facile and general procedure for the preparation of alkynyl C-nucleosides with varied fluorophores is presented. Sonogashira coupling was used as a key reaction to conjugate the dyes to an easily accessible ethynyl functionalized deoxyribose derivative. The new C-nucleosides were used for the preparation of DNA-based polyfluorophores.

Folding-induced exciton coupling in homo- and heterodimers of merocyanine dyes

Folding of a bis(merocyanine) dye with two different chromophores leads to a model system to elucidate electronic interactions in heteroaggregates.

One-Dimensional Multichromophor Arrays Based on DNA: From Self-Assembly to Light-Harvesting

Light-harvesting complexes collect light energy and deliver it by a cascade of energy and electron transfer processes to the reaction center where charge separation leads to storage as chemical energy. The design of artificial light-harvesting assemblies faces enormous challenges because several antenna chromophores need to be kept in close proximity but self-quenching needs to be avoided. Double stranded DNA as a supramolecular scaffold plays a promising role due to its characteristic structural properties. Automated DNA synthesis allows incorporation of artificial chromophore-modified building blocks, and sequence design allows precise control of the distances and orientations between the chromophores. The helical twist between the chromophores, which is induced by the DNA framework, controls energy and electron transfer and thereby reduces the self-quenching that is typically observed in chromophore aggregates. This Account summarizes covalently multichromophore-modified DNA and describes how such multichromophore arrays were achieved by Watson-Crick-specific and DNA-templated self-assembly. The covalent DNA systems were prepared by incorporation of chromophores as DNA base substitutions (either as C-nucleosides or with acyclic linkers as substitutes for the 2'-deoxyribofuranoside) and as DNA base modifications. Studies with DNA base substitutions revealed that distances but more importantly relative orientations of the chromophores govern the energy transfer efficiencies and thereby the light-harvesting properties. With DNA base substitutions, duplex stabilization was faced and could be overcome, for instance, by zipper-like placement of the chromophores in both strands. For both principal structural approaches, DNA-based light-harvesting antenna could be realized. The major disadvantages, however, for covalent multichromophore DNA conjugates are the poor yields of synthesis and the solubility issues for oligonucleotides with more than 5-10 chromophore modifications in a row. A logical alternative approach is to leave out the phosphodiester bridges between the chromophores and let chromophore-nucleoside conjugates self-assemble specifically along single stranded DNA as template. The self-organization of chromophores along the DNA template based on canonical base pairing would be advantageous because sequence selective base pairing could provide a structural basis for programmed complexity within the chromophore assembly. The self-assembly is governed by two interactions. The chromophore-nucleoside conjugates as guest molecules are recognized via hydrogen bonds to the corresponding counter bases in the single stranded DNA template. Moreover, the π-π interactions between the stacked chromophores stabilize these self-assembled constructs with increasing length. Longer DNA templates are more attractive for self-assembled antenna. The helicity in the stack of porphyrins as guest molecules assembled on the DNA template can be switched by environmental changes, such as pH variations. DNA-templated stacks of ethynyl pyrene and nile red exhibit left-handed chirality, which stands in contrast to similar covalent multichromophore-DNA conjugates with enforced right-handed helicity. With ethynyl nile red, it is possible to occupy every available binding site on the templates. Mixed assemblies of ethynyl pyrene and nile red show energy transfer and thereby provide a proof-of-principle that simple light-harvesting antennae can be obtained in a noncovalent and self-assembled fashion. With respect to the next important step, chemical storage of the absorbed light energy, future research has to focus on the coupling of sophisticated DNA-based light-harvesting antenna to reaction centers.

DNA-Based Oligochromophores as Light-Harvesting Systems

The chromophores ethynyl pyrene as blue, ethynyl perylene as green and ethynyl Nile red as red emitter were conjugated to the 5-position of 2'-deoxyuridine via an acetylene bridge. Using phosphoramidite chemistry on solid phase labelled DNA duplexes were prepared that bear single chromophore modifications, and binary and ternary combinations of these chromophore modifications. The steady-state and time-resolved fluorescence spectra of all three chromophores were studied in these modified DNA duplexes. An energy-transfer cascade occurs from ethynyl pyrene over ethynyl perylene to ethynyl Nile red and subsequently an electron-transfer cascade in the opposite direction (from ethynyl Nile red to ethynyl perylene or ethynyl pyrene, but not from ethynyl perylene to ethynyl pyrene). The electron-transfer processes finally provide charge separation. The efficiencies by these energy and electron-transfer processes can be tuned by the distances between the chromophores and the sequences. Most importantly, excitation at any wavelength between 350 and 700 nm finally leads to charge separated states which make these DNA samples promising candidates for light-harvesting systems.