Location of a Hydrophobic Load in Poly(oligo(ethylene glycol) methyl ether methacrylate)s (PEGMAs) Dissolved in Water and Probed by Fluorescence

Two series of pyrene-labeled poly(oligo(ethylene glycol) methyl ether methacrylate)s referred to as PyEG5-PEGnMA and PyC4-PEGnMA were prepared to probe the region surrounding the polymethacrylate backbone by using the fluorescence of the dye pyrene. PyEG5-PEGnMA and PyC4-PEGnMA were prepared by copolymerizing the EGnMA methacrylate monomers with penta(ethylene glycol) 1-pyrenemethyl ether methacrylate or 1-pyrenebutyl methacrylate, respectively. In organic solvents, the much longer 18 non-hydrogen atom linker connecting the pyrene moieties to the polymethacrylate backbone in the PyEG5-PEGnMA samples enabled the deployment of the pyrenyl labels into the solution. In water, however, an excited pyrene for PyEG5-PEGnMA was found to probe a same volume as for the PyC4-PEGnMA samples where a much shorter 6 non-hydrogen atom spacer connected pyrene to the backbone. Another surprising observation, considering that the hydrophobicity of pyrene induces strong pyrene aggregation for many pyrene-labeled water-soluble polymers (Py-WSPs) in water, was the little pyrene aggregation found for the PyEG5-PEGnMA and PyC4-PEGnMA samples in water. These effects could be related to the organic-like domain (OLD) generated by the oligo(ethylene glycol) side chains densely arranged around the polymethacrylate backbone of the polymeric bottlebrush (PBB). Additional fluorescence experiments conducted with the penta(ethylene glycol) 1-pyrenemethyl ether derivative indicated that the cylindrical OLD surrounding the polymethacrylate backbone had a chemical composition similar to that of ethylene glycol. Binding of hydrophobic pyrene molecules to unlabeled PEGnMA bottlebrushes in water further supported the existence of the OLD. The demonstration, that PEGnMA samples form an OLD in water, which can host and protect hydrophobic cargoes like pyrene, should lead to the development of improved PEGnMA-based drug delivery systems.

Tunable backbone-degradable robust tissue adhesives via in situ radical ring-opening polymerization

Adhesives with both robust adhesion and tunable degradability are clinically and ecologically vital, but their fabrication remains a formidable challenge. Here we propose an in situ radical ring-opening polymerization (rROP) strategy to design a backbone-degradable robust adhesive (BDRA) in physiological environment. The hydrophobic cyclic ketene acetal and hydrophilic acrylate monomer mixture of the BDRA precursor allows it to effectively wet and penetrate substrates, subsequently forming a deep covalently interpenetrating network with a degradable backbone via redox-initiated in situ rROP. The resulting BDRAs show good adhesion strength on diverse materials and tissues (e.g., wet bone >16 MPa, and porcine skin >150 kPa), higher than that of commercial cyanoacrylate superglue (~4 MPa and 56 kPa). Moreover, the BDRAs have enhanced tunable degradability, mechanical modulus (100 kPa-10 GPa) and setting time (seconds-hours), and have good biocompatibility in vitro and in vivo. This family of BDRAs expands the scope of medical adhesive applications and offers an easy and environmentally friendly approach for engineering.

Current Standing on Radical Ring-Opening Polymerizations of Cyclic Ketene Acetals as Homopolymers and Copolymers with one another

Radical Ring-opening polymerization (RROP) of cyclic ketene acetals (CKAs) emerges to be a valuable polymerization technique. In attracting more attention, RROP has seen a new spike in publications, which the authors will put into perspective. This review will hence address the progress made on the number of available CKAs and the synthetic strategies to get them. In grouping, the available monomers into distinct categories, the enormous variety of available CKAs will be highlighted. Polymerizations of CKAs without vinylenes have the potential to yield fully biodegradable polymers, which is why this kind of polymerization is the focus of this review. Detailing the current understanding of the mechanism, the various side reactions will be noted and also their effect on the overall properties of the final polymers. Current attempts to control the ring-retaining and branching reactions will be discussed as well. In addition to the polymerization itself, the available materials will be discussed as well as homopolymers, copolymers of CKAs, and block-copolymers with pure CKA-blocks have significantly widened the range of possible applications of materials from RROP. Altogether this review highlights the progress in the entire field of RROP just of CKAs to give a holistic overview of the field.

Mechanistic investigation of cyclic ketene acetal radical ring-opening homo- and co-polymerization and preparation of PEO graft copolymers with tunable composition

Radical ring-opening polymerization of cyclic ketene acetals (CKAs) led to homogeneous ester insertion during semi-batch reactions with N-vinyl pyrrolidone (NVP). Investigation of CKA radical transfer allowed for CKA–NVP graft copolymer preparation.

Biodegradable phosphorylcholine copolymer for cardiovascular stent coating

Phosphorylcholine (PC) based polymer coatings with excellent biocompatibility have shown successful commercialization in drug-eluting stents. However, poor degradability represents a challenge in the application of biodegradable stents. Herein, a biodegradable phosphorylcholine copolymer is developed based on one-step radical ring-opening polymerization (RROP). This copolymer was synthesized by copolymerization of a PC unit, degradable ester (2-methylene-1,3-dioxepane, MDO) unit and non-degradable butyl methacrylate (BMA) unit, which showed ratio controllability by changing the monomer ratio during polymerization. We demonstrated that the copolymer with the ratio of 34% MDO, 19% MPC and 47% BMA could form a stable coating by ultrasonic spray, and showed good blood compatibility, anti-adhesion properties, biodegradability, and rapamycin eluting capacity. In vivo study revealed its promising application as a biodegradable stent coating. This work provides a facile path to add biodegradability into PC based polymers for further bio-applications.

Reversible-deactivation radical polymerization of cyclic ketene acetals

This review discusses the history of reversible-deactivation radical ring-opening polymerization of cyclic ketene acetals, focusing on the preparation of degradable complex polymeric architectures.

Degradable polymer prodrugs with adjustable activity from drug-initiated radical ring-opening copolymerization

Degradable polymer prodrugs based on gemcitabine (Gem) as an anticancer drug were synthesized by 'drug-initiated' nitroxide-mediated radical ring-opening copolymerization (NMrROP) of methacrylic esters and 2-methylene-4-phenyl-1,3-dioxolane (MPDL). Different structural parameters were varied to determine the best biological performances: the nature of the monomer [i.e., oligo(ethylene glycol) methacrylate (OEGMA) or methyl methacrylate (MMA)], the nature of the Gem-polymer linker (i.e., amide or amide and diglycolate) and the MPDL content in the copolymer. Depending on the nature of the methacrylate monomer, two small libraries of water-soluble copolymer prodrugs and nanoparticles were obtained (M n ∼10 000 g mol-1, Đ = 1.1-1.5), which exhibited tunable hydrolytic degradation under accelerated conditions governed by the MPDL content. Drug-release profiles in human serum and in vitro anticancer activity on different cell lines enabled preliminary structure-activity relationships to be established. The cytotoxicity was independently governed by: (i) the MPDL content - the lower the MPDL content, the greater the cytotoxicity; (ii) the nature of the linker - the presence of a labile diglycolate linker enabled a greater Gem release compared to a simple amide bond and (iii) the hydrophilicity of the methacrylate monomer-OEGMA enabled a greater anticancer activity to be obtained compared to MMA-based polymer prodrugs. Remarkably, the optimal structural parameters enabled reaching the cytotoxic activity of the parent (free) drug.

Molecular bionics - engineering biomaterials at the molecular level using biological principles

Life and biological units are the result of the supramolecular arrangement of many different types of molecules, all of them combined with exquisite precision to achieve specific functions. Taking inspiration from the design principles of nature allows engineering more efficient and compatible biomaterials. Indeed, bionic (from bion-, unit of life and -ic, like) materials have gained increasing attention in the last decades due to their ability to mimic some of the characteristics of nature systems, such as dynamism, selectivity, or signalling. However, there are still many challenges when it comes to their interaction with the human body, which hinder their further clinical development. Here we review some of the recent progress in the field of molecular bionics with the final aim of providing with design rules to ensure their stability in biological media as well as to engineer novel functionalities which enable navigating the human body.

Designing Smart Polymer Conjugates for Controlled Release of Payloads

Incorporating labile bonds inside polymer backbone and side chains yields interesting polymer materials that are responsive to change of environmental stimuli. Drugs can be conjugated to various polymers through different conjugation linkages and spacers. One of the key factors influencing the release profile of conjugated drugs is the hydrolytic stability of the conjugated linkage. Generally, the hydrolysis of acid-labile linkages, including acetal, imine, hydrazone, and to some extent β-thiopropionate, are relatively fast and the conjugated drug can be completely released in the range of several hours to a few days. The cleavage of ester linkages are usually slow, which is beneficial for continuous and prolonged release. Another key structural factor is the water solubility of polymer-drug conjugates. Generally, the release rate from highly water-soluble prodrugs is fast. In prodrugs with large hydrophobic segments, the hydrophobic drugs are usually located in the hydrophobic core of micelles and nanoparticles, which limits the access to the water, hence lowering significantly the hydrolysis rate. Finally, self-immolative polymers are also an intriguing new class of materials. New synthetic pathways are needed to overcome the fact that much of the small molecules produced upon degradation are not active molecules useful for biomedical applications.

Zwitterionic Phosphorylcholine-TPE Conjugate for pH-Responsive Drug Delivery and AIE Active Imaging

Polymeric micelles have emerged as a promising nanoplatform for cancer theranostics. Herein, we developed doxorubicin (DOX) encapsulated pH-responsive polymeric micelles for combined aggregation induced emission (AIE) imaging and chemotherapy. The novel zwitterionic copolymer poly(2-methacryloyloxyethylphosphorylcholine-co-2-(4-formylphenoxy)ethyl methacrylate) (poly(MPC-co-FPEMA)) was synthesized via RAFT polymerization and further converted to PMPC-hyd-TPE after conjugation of tetraphenylethene (TPE, a typical AIE chromophore) via acid-cleavable hydrazone bonds. The AIE activatable copolymer PMPC-hyd-TPE could self-assemble into spherical PC-hyd-TPE micelles, and DOX could be loaded through hydrophobic interactions. The zwitterionic micelles exhibited excellent physiological stability and low protein adsorption due to the stealthy phosphorylcholine (PC) shell. In addition, the cleavage of hydrophobic TPE molecules under acidic conditions could induce swelling of micelles, which was verified by size changes with time at pH 5.0. The in vitro DOX release profile also exhibited accelerated release rate with pH value decreasing from 7.4 to 5.0. Fluorescent microscopy and flow cytometry studies further demonstrated fast internalization and accumulation of drug loaded PC-hyd-TPE-DOX micelles in HepG2 cells, resulting in considerable time/dose-dependent cytotoxicity. Meanwhile, high-quality AIE imaging of PC-hyd-TPE micelles was confirmed in HepG2 cells. Notably, ex vivo imaging study exhibited efficient accumulation and drug release of PC-hyd-TPE-DOX micelles in the tumor tissue. Consequently, the multifunctional micelles with combined nonfouling surface, AIE active imaging, and pH-responsive drug delivery showed great potential as novel nanoplatforms for a new generation of cancer theranostics.

Surface-Functionalized Biodegradable Nanoparticles Consisting of Amphiphilic Graft Polymers Prepared by Radical Copolymerization of 2-Methylene-1,3-Dioxepane and Macromonomers

Biodegradable polyester-based nanoparticles were prepared by the precipitation of amphiphilic graft copolymers, which were prepared by the ring-opening radical copolymerization of 2-methylene-1,3-dioxepane (MDO) and amphiphilic macromonomers. The diameter of the nanoparticles was controlled by the degree of grafting and the molecular weight of the grafting oligomer. PMDO-g-poly(ethylene glycol) nanoparticles were degraded by the alkaline hydrolysis of the polyester backbone. Although the colloidal stability of nanoparticles was retained due to the reorientation of the PEG chains during hydrolysis, the size of the nanoparticles decreased with increasing hydrolysis time. We also prepared PMDO-g-poly(N-isopropylacrylamide) nanoparticles, which show aggregation in response to increasing temperature.