Thiol-epoxy 'click' chemistry: a focus on molecular attributes in the context of polymer chemistry

Base-catalyzed ring-opening reaction of epoxides with the thiol nucleophiles is useful in the preparation and post-polymerization modification of synthetic polymers. Due to its many beneficial characteristics, this process is referred to as the thiol-epoxy 'click' reaction. In this article, our aim is to discuss the fundamental attributes of this process by tracing our own steps in the field. We initially address the aspects of efficiency, regio-selectivity, stoichiometry, and reaction conditions with the help of linear, hyperbranched, graft, dendritic, and cross-linked poly(β-hydroxy thioether)s. A special emphasis is placed on hydrogel synthesis and photopolymerization on surfaces. Subsequently, quenching of the alkoxide anion is considered which is a critical step in the formation of the β-hydroxy thioether linkage upon completion of reaction. The amenability of further reaction on the hydroxy and thioether groups through esterification and sulfur alkylation is then discussed. Initially, post-gelation/fabrication modification of sulfide linkages is considered to obtain cationic sulfonium hydrogels and zwitterionic photopatterned networks with antibacterial and antibiofouling properties, respectively. A post-synthesis functionalization strategy is then described to access same centered and segregated main-chain poly(β-hydroxy sulfonium)s as potent antibacterial materials. In side-chain polysulfides, the sequential post-synthesis modifications involving poly(glycidyl methacrylate) scaffolds can lead to the formation of amphiphilic homopolymers. The application of such materials is discussed in the arena of siRNA delivery. Finally, concerns relating to the formation of disulfide defects and open research goals such as study of the orthogonality of the reaction are addressed.

Assembling Complex Macromolecules and Self-Organizations of Biological Relevance with Cu(I)-Catalyzed Azide-Alkyne, Thio-Bromo, and TERMINI Double "Click" Reactions

In 2022, the Nobel Prize in Chemistry was awarded to Bertozzi, Meldal, and Sharpless "for the development of click chemistry and biorthogonal chemistry". Since 2001, when the concept of click chemistry was advanced by Sharpless laboratory, synthetic chemists started to envision click reactions as the preferred choice of synthetic methodology employed to create new functions. This brief perspective will summarize research performed in our laboratories with the classic Cu(I)-catalyzed azide-alkyne click (CuAAC) reaction elaborated by Meldal and Sharpless, with the thio-bromo click (TBC) and with the less-used, irreversible TERminator Multifunctional INItiator (TERMINI) dual click (TBC) reactions, the last two elaborated in our laboratory. These click reactions will be used to assemble, by accelerated modular-orthogonal methodologies, complex macromolecules and self-organizations of biological relevance. Self-assembling amphiphilic Janus dendrimers and Janus glycodendrimers together with their biological membrane mimics known as dendrimersomes and glycodendrimersomes as well as simple methodologies to assemble macromolecules with perfect and complex architecture such as dendrimers from commercial monomers and building blocks will be discussed. This perspective is dedicated to the 75th anniversary of Professor Bogdan C. Simionescu, the son of my (VP) Ph.D. mentor, Professor Cristofor I. Simionescu, who as his father, took both science and science administration in his hands, and dedicated his life to handling them in a tandem way, to their best.

Investigation of the Binding of Lectins with Polymer Glycoconjugates and the Glycoconjugates Containing Silver Nanoparticles by Means of Optical Spectroscopy and Light Scattering

The synthesis of glycoconjugates, lectin-specific polymers containing a carbohydrate ligand (spacered residue of N-acetyl-D-glucosamine, β-N-Gly-GlcNAc) has been carried out. Glyconanoparticles (glycol-NPs) containing a label detectable by means of spectrophotometry, silver nanoparticles, have been prepared on the basis of the glycoconjugates. Copolymers of maleic anhydride with ethylene or N-vinylpyrrolidone have been used as a carrier to introduce the carbohydrate ligand and a stabilizer of silver nanoparticles. Solutions of the glycoconjugates and the silver glyconanoparticles have been characterized by means of light scattering, UV-visible spectroscopy, and TEM. The interaction of the obtained glycoconjugates and silver glyconanoparticles with N-acetyl-D-glucosamine-specific lectins of Solanum tuberosum agglutinin (STA) and wheat germ agglutinin (WGA) has been investigated by means of light scattering and UV-visible spectro-scopy. The data obtained via these physical methods using the carbohydrate-containing derivatives labeled with silver nanoparticles have been in agreement. It has been shown that the glycoconjugates and silver glyconanoparticles based on more hydrophilic copolymer of maleic acid with N-vinylpyrrolidone are more sensitive than the respective systems based on more hydrophobic copolymer of maleic acid with ethylene. It has been also shown that the considered systems are more sensitive to the STA lectin than to the WGA lectin. The silver glyconanoparticles have allowed more accurate and reliable detection of the lectins by means of light scattering, as compared to the glycopolymer.

From poly(vinylimidazole) to cationic glycopolymers and glyco-particles: effective antibacterial agents with enhanced biocompatibility and selectivity

Cationic glycopolymers have attracted great attention as a new type of antibacterial material.

ABC-Type Triblock Copolyacrylamides via Copper-Mediated Reversible Deactivation Radical Polymerization

The aqueous Cu(0)-mediated reversible deactivation radical polymerization (RDRP) of triblock copolymers with two block sequences at 0.0 °C is reported herein. Well-defined triblock copolymers initiated from PHEAA or PDMA, containing (A) 2-hydroxyethyl acrylamide (HEAA), (B) N-isopropylacrylamide (NIPAM) and (C) N, N-dimethylacrylamide (DMA), were synthesized. The ultrafast one-pot synthesis of sequence-controlled triblock copolymers via iterative sequential monomer addition after full conversion, without any purification steps throughout the monomer additions, was performed. The narrow dispersities of the triblock copolymers proved the high degree of end-group fidelity of the starting macroinitiator and the absence of any significant undesirable side reactions. Controlled chain length and extremely narrow molecular weight distributions (dispersity ~1.10) were achieved, and quantitative conversion was attained in as little as 52 min. The full disproportionation of CuBr in the presence of Me6TREN in water prior to both monomer and initiator addition was crucially exploited to produce a well-defined ABC-type triblock copolymer. In addition, the undesirable side reaction that could influence the living nature of the system was investigated. The ability to incorporate several functional monomers without affecting the living nature of the polymerization proves the versatility of this approach.

Cellulose-derived polyols as high-capacity adsorbents for rapid boron and organic pollutants removal from water

Excess boron in water could result in a critical hazard to plants and humans. Traditional treatment approaches cannot efficiently remove boron from water, especially during seawater desalination using reverse osmosis technology. Achieving satisfactory adsorption capacity and rate for boron remains an unmet goal for decades. Herein, we report cellulose-derived polyols as high-performance adsorbents that can rapidly remove boron and organic pollutants from water. Cellulose-derived polyols were synthesized from saccharides and cellulose via controlled radical polymerization and click reaction. Remarkably, CA@NMDG can adsorb boron with an astonishing capacity of ~34 mg g^-1 in 10 min, which surpasses all those cellulose-based materials reported thus far, meanwhile, much faster than those of commercial adsorption resin. Moreover, cellulose-derived polyols also showed high removal efficiencies (70-98% in several minutes) toward certain organic pollutants, including Congo red and Reactive Blue 19. The water-insoluble characteristic of cellulose-derived polyols is advantageous to be separated from the treated sewage after adsorption for reuse. This work provides a novel insight into the fabrication of safe, fast, and high-capacity cellulose adsorbents for water purification.

Thermally-induced hyperbranching of bromine-containing polyesters by insertion of in situ generated chain-end carbenes

Hyperbranched, biodegradable PCL-based polymers are obtained through a random but invasive migration of an in situ generated carbene end group which is unmasked via the thermolysis of its precursor diazirine moiety. These hyperbranched cores are used as macroinitiators for 'grafting-from' polymerisation using controlled radical polymerisation to achieve amphiphilic copolymers which can subsequently be self-assembled into spherical core-shell micelles.

Boronic Acid Functionalized Nanosilica for Binding Guest Molecules

Dendritic fibrous nanosilica (DFNS) has very high surface area and well-defined nanochannels; therefore, it is very useful as supporting material for numerous applications including catalysis, sensing, and bioseparation. Due to the highly restricted space, addition of molecular ligands to DFNS is very challenging. This work studies how ligand conjugation in nanoscale pores in DFNS can be achieved through copper-catalyzed click reaction, using an optional, in situ synthesized, temperature-responsive polymer intermediate. A clickable boronic acid is used as a model to investigate the ligand immobilization and the molecular binding characteristics of the functionalized DFNS. The morphology, composition, nanoscale pores, and specific surface area of the boronic acid functionalized nanosilica were characterized by electron microscopy, thermogravimetric and elemental analysis, Fourier transform infrared spectroscopy, and nitrogen adsorption-desorption measurements. The numbers of boronic acid molecules on the modified DFNS with and without the polymer were determined to be 0.08 and 0.68 mmol of ligand/g of DFNS, respectively. We also studied the binding of small cis-diol molecules in the nanoscale pores of DFNS. The boronic acid modified DFNS with the polymer intermediate exhibits higher binding capacity for Alizarin Red S and nicotinamide adenine dinucleotide than the polymer-free DFNS. The two types of boronic acid modified DFNS can bind small cis-diol molecules in the presence of large glycoproteins, due in large part to the effect of size exclusion provided by the nanochannels in the DFNS.

Synthesis of fully degradable cationic polymers with various topological structures via postpolymerization modification by using thio-bromo “click” reaction

Poly(ε-caprolactone) (PCL) based and fully degradable cationic polymers with various topological structures and tunable charge densities were prepared via postpolymerization modification using thio-bromo “click” chemistry.

100th Anniversary of Macromolecular Science Viewpoint: Polymers from Lignocellulosic Biomass. Current Challenges and Future Opportunities

Sustainable polymers from lignocellulosic biomass have the potential to reduce the environmental impact of commercial plastics while also offering significant performance and cost benefits relative to petrochemical-derived macromolecules. However, most currently available biobased polymers are hampered by insufficient thermomechanical properties, low economic feasibility (e.g., high relative cost), and reduced scalability in comparison to petroleum-based incumbents. Future biobased materials must overcome these limitations to be competitive in the marketplace. Additionally, sustainability challenges at the beginning and end of the polymer lifecycle need to be addressed using green chemistry practices and improved end-of-life waste management strategies. This viewpoint provides an overview of recent developments that can mitigate many concerns with present materials and discusses key aspects of next-generation, biobased polymers derived from lignocellulosic biomass.

Synthetic approaches for multiblock copolymers

Multiblock copolymers (MBCs) are an emerging class of synthetic polymers that exhibit different macromolecular architectures and behaviours to those of homopolymers or di/triblock copolymers.

Synthesis of well-defined heteroglycopolymers via combining sequential click reactions and PPM: the effects of linker and heterogeneity on Con A binding

A versatile post- polymerization modification strategy to synthesize well-defined glycopolymers via the combination of RAFT polymerization and sequential CuAAC and thiol–ene click reactions was developed.

Uniform and Easy-To-Prepare Glycopolymer-Brush Interface for Rapid Protein (Anti-)Adhesion Sensing

Glycopolymers have emerged as powerful and versatile glycan analogues for the investigation of cellular signal transduction. In this study, a layer of the glycopolymer-brush (GlyB) interface was functionalized on the surface of gold substrates. In order to enhance the capability and accessibility of this transducer interface, a combined protocol of copper(0)-mediated living radical polymerization (Cu(0)-LRP) with subsequent "CuAAC" click reaction was utilized to synthesize a set of novel glycopolymer precursors with a tunable scaffold structure and pyranose ligands. The resulting glycopolymer exhibited a fine-tuned molecular weight with a minor dispersity of 1.27. Through surface plasmon resonance (SPR) analysis, various GlyB interfaces exhibiting different saccharide moieties (glucose, mannose, and galactose) were examined to study their adhesion or antiadhesion potential toward three types of proteins, concanavalin A, bovine serum albumin, and peanut agglutinin (PNA). The strong affinity between poly(galactose) and PNA was further employed to construct a proof-of-concept aggregation-mediated sensing system. This minimal naked-eye sensor that consisted of only two substances, namely, gold nanoparticles and glycopolymers, was characterized and tested for its potential in protein quantification.

SET-LRP of Bio- and Petroleum-Sourced Methacrylates in Aqueous Alcoholic Mixtures

Single-electron transfer-living radical polymerization (SET-LRP) in "programmed" aqueous organic biphasic systems eliminates the judicious choice of solvent and also provides accelerated reaction rates. Herein, we report efforts to expand the monomer scope for these systems by targeting methacrylic monomers and polymers. Various environmentally friendly aqueous alcoholic mixtures were used in combination with Cu(0) wire catalyst, tris(2-dimethylaminoethyl)amine (Me₆-TREN) ligand, and p-toluenesulfonyl chloride (Ts-Cl) initiator to deliver well-defined polymethacrylates from methyl methacrylate, butyl methacrylate, and other monomers derived from biomass feedstock (e.g., lactic acid, isosorbide, furfural, and lauric acid). The effect of water on the nature of the reaction mixture during the SET-LRP process, reaction rate, and control of the polymerization is discussed. The control retained under the reported conditions is demonstrated by synthesizing polymers of different targeted molar mass as well as quasi-block AB copolymers by "in situ" chain extension at high conversion. These results highlight the capabilities of SET-LRP to provide sustainable solutions based on renewable resources.

Microscale synthesis of multiblock copolymers using ultrafast RAFT polymerisation

We demonstrate that ultrafast RAFT in the presence of air can be scaled down to 2 μL with good control using microvolume insert vials as the polymerisation vessel.

Synthesis of well-defined glycopolymers with highly ordered sugar units in the side chain via combining CuAAC reaction and ROMP: lectin interaction study in homo- and hetero-glycopolymers

The design of novel heterogeneous glycopolymers with different sugar motifs is of critical importance in the glycopolymer field.

Synthesis and Assembly of Laccase-Polymer Giant Amphiphiles by Self-Catalyzed CuAAC Click Chemistry

Covalent coupling of hydrophobic polymers to the exterior of hydrophilic proteins would mediate unique macroscopic assembly of bioconjugates to generate amphiphilic superstructures as novel nanoreactors or biocompatible drug delivery systems. The main objective of this study was to develop a novel strategy for the synthesis of protein-polymer giant amphiphiles by the combination of copper-mediated living radical polymerization and azide-alkyne cycloaddition reaction (CuAAC). Azide-functionalized succinimidyl ester was first synthesized for the facile introduction of azide groups to proteins such as albumin from bovine serum (BSA) and laccase from Trametes versicolor. Alkyne-terminal polymers with varied hydrophobicity were synthesized by using commercial copper wire as the activators from a trimethylsilyl protected alkyne-functionalized initiator in DMSO under ambient temperature. The conjugation of alkyne-functionalized polymers to the azide-functionalized laccase could be conducted even without additional copper catalyst, which indicated a successful self-catalyzed CuAAC reaction. The synthesized amphiphiles were found to aggregate into spherical nanoparticles in water and showed strong relevance to the hydrophobicity of coupled polymers. The giant amphiphiles showed decreased enzyme activity yet better stability during storage after chemical modification and self-assembly. These findings will deepen our understanding on protein folding, macroscopic self-assembly, and support potential applications in bionanoreactor, enzyme immobilization, and water purification.

Macromonomers, telechelics and more complex architectures of PMA by a combination of biphasic SET-LRP and biphasic esterification

Macromonomers and telechelics of PMA via biphasic SET-LRP and biphasic esterification with potassium acrylate.

The effect of linker length on ConA and DC-SIGN binding of S-glucosyl functionalized poly(2-oxazoline)s

A series of poly(2-oxazoline) based glycopolymers with different linkers were prepared via thiol–ene click reaction and cationic ring opening reaction. The binding of these polymers to lectins were studied.

Click and Click-Inspired Chemistry for the Design of Sequence-Controlled Polymers

During the previous decade, many popular chemical reactions used in the area of "click" chemistry and similarly efficient "click-inspired" reactions have been applied for the design of sequence-defined and, more generally, sequence-controlled structures. This combination of topics has already made quite a significant impact on scientific research to date and has enabled the synthesis of highly functionalized and complex oligomeric and polymeric structures, which offer the prospect of many exciting further developments and applications in the near future. This minireview highlights the fruitful combination of these two topics for the preparation of sequence-controlled oligomeric and macromolecular structures and showcases the vast number of publications in this field within a relatively short span of time. It is divided into three sections according to the click-(inspired) reaction that has been applied: copper-catalyzed azide-alkyne cycloaddition, thiol-X, and related thiolactone-based reactions, and finally Diels-Alder-chemistry-based routes are outlined, respectively.

Specific and Differential Binding of N-Acetylgalactosamine Glycopolymers to the Human Macrophage Galactose Lectin and Asialoglycoprotein Receptor

A range of glycopolymers composed of N-acetylgalactosamine were prepared via sequential Cu(I)-mediated polymerization and alkyne-azide click (CuAAC). The resulting polymers were shown, via multichannel surface plasmon resonance, to interact specifically with human macrophage galactose lectin (MGL; CD301) with high affinity (K_D = 1.11 μM), but they did not bind to the mannose/fucose-selective human lectin dendritic-cell-specific intercellular adhesion molecule-3-grabbing nonintegrin (DC-SIGN; CD209). The effect of sugar ligand valency on the binding (so-called "glycoside cluster effect") of poly(N-acetylgalactosamine) to MGL was investigated by varying first the polymer chain length (DP: 100, 64, 40, 23, 12) and then the architecture (4- and 8-arm star glycopolymers). The chain length did not have a significant effect on the binding to MGL (K_D = 0.17-0.52 μM); however, when compared to a hepatic C-type lectin of a similar monosaccharide specificity, the asialoglycoprotein receptor (ASGPR), the binding affinity was more noticeably affected (K_D = 0.37- 6.65 μM). These data suggest that known differences in the specific configuration/orientation of the carbohydrate recognition domains of MGL and ASGPR are responsible for the differences in binding observed between the different polymers of varied chain length and architecture. In the future, this model has the potential to be employed for the development of tissue-selective delivery systems.

Recent Developments in the Synthesis of Biomacromolecules and their Conjugates by Single Electron Transfer-Living Radical Polymerization

Single electron transfer-living radical polymerization (SET-LRP) represents a robust and versatile tool for the synthesis of vinyl polymers with well-defined topology and chain end functionality. The crucial step in SET-LRP is the disproportionation of the Cu(I)X generated by activation with Cu(0) wire, powder, or nascent Cu(0) generated in situ into nascent, extremely reactive Cu(0) atoms and nanoparticles and Cu(II)X₂. Nascent Cu(0) activates the initiator and dormant chains via a homogeneous or heterogeneous outer-sphere single-electron transfer mechanism (SET-LRP). SET-LRP provides an ultrafast polymerization of a plethora of monomers (e.g., (meth)-acrylates, (meth)-acrylamides, styrene, and vinyl chloride) including hydrophobic and water insoluble to hydrophilic and water soluble. Some advantageous features of SET-LRP are (i) the use of Cu(0) wire or powder as readily available catalysts under mild reaction conditions, (ii) their excellent control over molecular weight evolution and distribution as well as polymer chain ends, (iii) their high functional group tolerance allowing the polymerization of commercial-grade monomers, and (iv) the limited purification required for the resulting polymers. In this Perspective, we highlight the recent advancements of SET-LRP in the synthesis of biomacromolecules and of their conjugates.

Self-assembly and functionalization of alternating copolymer vesicles

This work reports novel alternating copolymer vesicles and their facile functionalization with carboxyl and amino groups through click copolymerization.

Sequence-coded ATRP macroinitiators

Sequence-defined oligourethanes were transformed into ATRP initiators and used for the synthesis of precision macromolecular architectures.

Post-polymerization modification reactions of poly(glycidyl methacrylate)s

Single and multiple post-polymerization modifications of poly(glycidyl methacrylate) scaffold through the nucleophilic ring-opening reactions of the pendent epoxide groups are described.

Recyclable cross-linked hydroxythioether particles with tunable structures via robust and efficient thiol-epoxy dispersion polymerizations

Thiol-epoxy reactions were first exploited as a simple method for the preparation of recyclable cross-linked hydroxythioether particles with tunable structures.