Stimuli-responsive biomaterials: smart avenue toward 4D bioprinting

3D bioprinting is an advanced technology combining cells and bioactive molecules within a single bioscaffold; however, this scaffold cannot change, modify or grow in response to a dynamic implemented environment. Lately, a new era of smart polymers and hydrogels has emerged, which can add another dimension, e.g., time to 3D bioprinting, to address some of the current approaches' limitations. This concept is indicated as 4D bioprinting. This approach may assist in fabricating tissue-like structures with a configuration and function that mimic the natural tissue. These scaffolds can change and reform as the tissue are transformed with the potential of specific drug or biomolecules released for various biomedical applications, such as biosensing, wound healing, soft robotics, drug delivery, and tissue engineering, though 4D bioprinting is still in its early stages and more works are required to advance it. In this review article, the critical challenge in the field of 4D bioprinting and transformations from 3D bioprinting to 4D phases is reviewed. Also, the mechanistic aspects from the chemistry and material science point of view are discussed too.

pH-Dependent Solution Micellar Structure of Amphoteric Polypeptoid Block Copolymers with Positionally Controlled Ionizable Sites

While solution micellization of ionic block copolymers (BCP) with randomly distributed ionization sites along the hydrophilic segments has been extensively studied, the roles of positionally controlled ionization sites along the BCP chains in their micellization and resulting micellar structure remain comparatively less understood. Herein, three amphoteric polypeptoid block copolymers carrying two oppositely charged ionizable sites, with one fixed at the hydrophobic terminus and the other varyingly positioned along the hydrophilic segment, have been synthesized by sequential ring-opening polymerization method. The presence of the ionizable site at the hydrophobic segment terminus is expected to promote polymer association toward equilibrium micellar structures in an aqueous solution. The concurrent presence of oppositely charged ionizable sites on the polymer chains allows the polymer association to be electrostatically modulated in a broad pH range (ca. 2-12). Micellization of the amphoteric polypeptoid BCP in dilute aqueous solution and the resulting micellar structure at different solution pHs was investigated by a combination of scattering and microscopic methods. Negative-stain transmission-electron microscopy (TEM), small-angle neutron scattering (SANS), and small-angle X-ray scattering (SAXS) analyses revealed the dominant presence of core-shell-type spherical micelles and occasional rod-like micelles with liquid crystalline (LC) domains in the micellar core. The micellar structures (e.g., aggregation number, radius of gyration, chain packing in the micelle) were found to be dependent on the solution pH and the position of the ionizable site along the chain. This study has highlighted the potential of controlling the position of ionizable sites along the BCP polymer to modulate the electrostatic and LC interactions, thus tailoring the micellar structure at different solution pH values in water.

Precision polymer nanofibers with a responsive polyelectrolyte corona designed as a modular, functionalizable nanomedicine platform

We describe the development of a modular, functionalizable platform for biocompatible core-shell block copolymer nanofibers of controlled length (22 nm – 1.3 μm) and low dispersity produced via living crystallization-driven...

Smart, Naturally-Derived Macromolecules for Controlled Drug Release

A series of troxerutin-based macromolecules with ten poly(acrylic acid) (PAA) or poly(2-dimethylaminoethyl methacrylate) (PDMAEMA) homopolymer side chains were synthesized by a supplemental activator and reducing agent atom transfer radical polymerization (SARA ATRP) approach. The prepared precisely-defined structures with low dispersity (M_w/M_n < 1.09 for PAA-based, and M_w/M_n < 1.71 for PDMAEMA-based macromolecules) exhibited pH-responsive behavior depending on the length of the polymer grafts. The properties of the received polyelectrolytes were investigated by dynamic light scattering (DLS) measurement to determine the hydrodynamic diameter and zeta potential upon pH changes. Additionally, PDMAEMA-based polymers showed thermoresponsive properties and exhibited phase transfer at a lower critical solution temperature (LCST). Thanks to polyelectrolyte characteristics, the prepared polymers were investigated as smart materials for controlled release of quercetin. The influence of the length of the polymer grafts for the quercetin release profile was examined by UV–VIS spectroscopy. The results suggest the strong correlation between the length of the polymer chains and the efficiency of active substance release, thus, the adjustment of the composition of the macromolecules characterized by branched architecture can precisely control the properties of smart delivery systems.

The influences of monomer structure and solvent on the radical copolymerization of tertiary amine and PEGylated methacrylates

This work presents a meticulous and rigorous investigation of reactivity ratios of commonly used monomers (PEGMA, DEAEMA, and DMAEMA) with high importance for stimuli-responsive materials; a copolymerization mini-library with 9 systems is reported.

Four-Dimensional (Bio-)printing: A Review on Stimuli-Responsive Mechanisms and Their Biomedical Suitability

The applications of tissue engineered constructs have witnessed great advances in the last few years, as advanced fabrication techniques have enabled promising approaches to develop structures and devices for biomedical uses. (Bio-)printing, including both plain material and cell/material printing, offers remarkable advantages and versatility to produce multilateral and cell-laden tissue constructs; however, it has often revealed to be insufficient to fulfill clinical needs. Indeed, three-dimensional (3D) (bio-)printing does not provide one critical element, fundamental to mimic native live tissues, i.e., the ability to change shape/properties with time to respond to microenvironmental stimuli in a personalized manner. This capability is in charge of the so-called “smart materials”; thus, 3D (bio-)printing these biomaterials is a possible way to reach four-dimensional (4D) (bio-)printing. We present a comprehensive review on stimuli-responsive materials to produce scaffolds and constructs via additive manufacturing techniques, aiming to obtain constructs that closely mimic the dynamics of native tissues. Our work deploys the advantages and drawbacks of the mechanisms used to produce stimuli-responsive constructs, using a classification based on the target stimulus: humidity, temperature, electricity, magnetism, light, pH, among others. A deep understanding of biomaterial properties, the scaffolding technologies, and the implant site microenvironment would help the design of innovative devices suitable and valuable for many biomedical applications.

Gradient and asymmetric copolymers: the role of the copolymer composition profile in the ionization of weak polyelectrolytes

The ionization of weak polyelectrolytes can be altered by controlling the composition profile of the comonomers along the chain.

Enzyme-Induced Kinetic Control of Peptide-Polymer Micelle Morphology

In this paper, experiment and simulation were combined to provide a view of the molecular rearrangements underlying the equilibrium and nonequilibrium transitions occurring in stimuli-responsive block copolymer amphiphile self-assemblies. Three block copolymer amphiphiles were prepared, each consisting of a hydrophilic peptide brush, responsive to proteolytic enzymes, and containing one of three possible hydrophobic blocks: (1) poly(ethyl acrylate), (2) poly(styrene), or (3) poly(lauryl acrylate). When assembled, they generate three spherical micelles each responsive to the addition of the bacterial protease, thermolysin. We found core-block-dependent phase transitions in response to the hydrophilic block being truncated by the stimulus. In one example, we found an unexpected, well-defined, pathway-dependent spherical micelle to vesicle phase transition induced by enzymatic stimulus.

Solution Self-Assemblies of Sequence-Defined Ionic Peptoid Block Copolymers

A series of amphiphilic ionic peptoid block copolymers where the total number (1 or 3) and position of ionic monomers along the polymer chain are precisely controlled have been synthesized by the submonomer method. Upon dissolution in water at pH = 9, the amphiphilic peptoids self-assemble into small spherical micelles having hydrodynamic radius in ∼5-10 nm range and critical micellar concentration (CMC) in the 0.034-0.094 mg/mL range. Small-angle neutron scattering (SANS) analysis of the micellar solutions revealed unprecedented dependence of the micellar structure on the number and position of ionic monomers along the chain. It was found that the micellar aggregation number ( N_agg) and the micellar radius ( R_m) both increase as the ionic monomer is positioned progressively away from the junction of the hydrophilic and hydrophobic segments along the polymer chain. By defining an ionic monomer position number ( n) as the number of monomers between the junction and the ionic monomer, N_agg exhibited a power law dependence on n with an exponent of ∼1/3 and ∼3/10 for the respective singly and triply charged series. By contrast, R_m exhibited a weaker dependence on the ionic monomer position by a power law relationship with an exponent of ∼1/10 and ∼1/20 for the respective singly and triply charged series. Furthermore, R_m was found to scale with N_agg in a power-law relationship with an exponent of 0.32 for the singly charged series, consistent with a weakly charged ionic star-like polymer model in the unscreened regime. This study demonstrated a unique method to precisely tailor the structure of small spherical micelles based on ionic block copolymers by controlling the sequence and position of the ionic monomer.

Aqueous solution behaviour of novel water-soluble amphiphilic copolymers with elevated hydrophobic unit content

The synthesis and aqueous solution behaviour of water-soluble copolymers poly(OEGMA-stat-styrene)-b-PDMAPMA with a relatively high content of styrene units were explored.

Probing the causes of thermal hysteresis using tunable Nagg micelles with linear and brush-like thermoresponsive coronas

Self-assembled thermoresponsive polymers in aqueous solution have great potential as smart, switchable materials for use in biomedical applications. In recent years, attention has turned to the reversibility of these polymers' thermal transitions, which has led to debate over what factors influence discrepancies in the transition temperature when heating the system compared to the temperature obtained when cooling the system, known as the thermal hysteresis. Herein, we synthesize micelles with tunable aggregation numbers (Nagg) whose cores contain poly(n-butyl acrylate-co-N,N-dimethylacrylamide) (p(nBA-co-DMA)) and four different thermoresponsive corona blocks, namely poly(N-isopropylacrylamide) (pNIPAM), poly(N,N-diethylacrylamide) (pDEAm), poly(diethylene glycol monomethyl ether methacrylate) (pDEGMA) and poly(oligo(ethylene glycol) monomethyl ether methacrylate) (pOEGMA). By studying their thermoresponsive behavior, we elucidate the effects of changing numerous important characteristics both in the thermoresponsive chain chemistry and architecture, and in the structure of their self-assemblies. Our findings demonstrate large deviations in the reversibility between the self-assemblies and the corresponding thermoresponsive homopolymers; specifically we find that micelles whose corona consist of polymers with a brush-like architecture (pDEGMA and pOEGMA) exhibit irreversible phase transitions at a critical chain density. These results lead to a deeper understanding of stimuli-responsive self-assemblies and demonstrate the potential of tunable Nagg micelles for uncovering structure-property relationships in responsive polymer systems.

Blending block copolymer micelles in solution; Obstacles of blending

Amphiphilic block copolymers can assemble into a variety of structures on the nanoscale in selective solvent. The micelle blending protocol offers a simple unique route to reproducibly produce polymer nanostructures. Here we expand this blending protocol to a range of polymer micelle systems and self-assembly routes. We found by exploring a range of variables that the systems must be able to reach global equilibrium at some point for the blending protocol to be successful. Our results demonstrate the kinetics requirements, specifically core block glass transition temperature, Tg, and length of the block limiting the exchange rates, for the blending protocol which can then be applied to a wide range of polymer systems to access this simple protocol for polymer self-assembly.

Comparison of methods for the fabrication and the characterization of polymer self-assemblies: what are the important parameters?

The ability to self-assemble was evaluated for a large variety of amphiphilic block copolymers, including poly(ethyleneoxide-b-ε-caprolactone), poly(ethyleneoxide-b-d,l-lactide), poly(ethyleneoxide-b-styrene), poly(ethyleneoxide-b-butadiene) and poly(ethyleneoxide-b-methylmethacrylate). Different methods of formation are discussed, such as cosolvent addition, film hydration or electroformation. The influence of experimental parameters and macromolecular structures on the size and morphology of the final self-assembled structures is investigated and critically compared with the literature. The same process is carried out regarding the characterization of these structures. This analysis demonstrates the great care that should be taken when dealing with such polymeric assemblies. If the morphology of such assemblies can be predicted to some extent by macromolecular parameters like the hydrophilic/hydrophobic balance, those parameters cannot be considered as universal. In addition, external experimental parameters (methods of preparation, use of co-solvent, …) appeared as critical key parameters to obtain a good control over the final structure of such objects, which are very often not at thermodynamic equilibrium but kinetically frozen. A principal component analysis is also proposed, in order to examine the important parameters for forming the self-assemblies. Here again, the hydrophilic/hydrophobic fraction is identified as an important parameter.

CO2/pH-responsive particles with built-in fluorescence read-out

A novel fluorescent monomer was synthesized to probe the state of CO₂-responsive cross-linked polymer particles.

PHEA-g-PDMAEA well-defined graft copolymers: SET-LRP synthesis, self-catalyzed hydrolysis, and quaternization

This article reports the synthesis of well-defined graft copolymers containing a PHEA backbone and degradable PDMAEA side chains, by the combination of RAFT polymerization, SET-LRP, and the grafting-from strategy.

Micellar nanoparticles with tuneable morphologies through interactions between nucleobase-containing synthetic polymers in aqueous solution

Herein, we report the preparation of nucleobase-containing synthetic amphiphilic diblock copolymers using RAFT polymerization.

Effect of Micellization on the Thermoresponsive Behavior of Polymeric Assemblies

The chain density of polymer micelles, dictated by their aggregation number (N_agg), is an often overlooked parameter that governs the macroscopic behavior of responsive assemblies. Using a combination of variable-temperature light scattering, turbidimetry, and microcalorimetry experiments, the cloud point and thermal collapse of micellar poly(N-isopropylacrylamide) (pNIPAM) corona chains at lower temperatures than the cloud point were found to be largely independent of the micelle's N_agg. By controlling the core composition, the degree of hysteresis associated with the thermal transition was found to increase as a function of core hydrophobicity. We performed this study on well-characterized micelles with tunable N_agg values, composed of a thermoresponsive corona (pNIPAM) and a nonresponsive core block poly(n-butyl acrylate-co-N,N-dimethylacrylamide) (p(nBA-co-DMA)), which were synthesized using reversible addition-fragmentation chain transfer (RAFT) polymerization. This allowed for a distinction to be made between thermoresponsive behavior at both the molecular and macroscopic level. The study of the subtle differences between these behaviors was made possible using a combination of complementary techniques. These results highlight the critical need for consideration of the effect that self-assembly plays on the responsive behavior of polymer chains when compared with free unimers in solution.

Macro-RAFT agent mediated dispersion copolymerization: a small amount of solvophilic co-monomer leads to a great change

The macro-RAFT agent mediated dispersion copolymerization of two monomers is performed, and the block copolymer morphology can be easily tuned.