Standalone Highly Efficient Graphene Oxide as an Emerging Visible Light-Driven Photocatalyst and Recyclable Adsorbent for the Sustainable Removal of Organic Pollutants

Carbon-based nanostructures are promising eco-friendly multifunctional nanomaterials because of their tunable surface and optoelectronic properties for a variety of energy and environmental applications. The present study focuses on the synthesis of graphene oxide (GO) with particular emphasis on engineering its surface and optical properties for making it an excellent adsorbent as well as a visible light-active photocatalyst. It was achieved by modifying the improved Hummers method through optimizing the synthesis parameters involved in the oxidation process. This controlled synthesis allows for systematic tailoring of structural, optical, and surface functionality, leading to improved adsorption and photocatalytic properties for the sustainable removal of organic pollutants in water treatment. Several spectroscopic and microscopic characterization techniques, such as XRD, SEM, Raman, UV-visible, FTIR, TEM, XPS, BET, etc. were employed to analyze the degree of oxidation, surface chemistry/functionalization, morphological, optical, and structural properties of the synthesized GO nanostructures. The analyses showed excellent surface functionality with surface active sites for better adsorptive removal and a tunable band gap from 2.51 to 2.76 eV exhibiting excellent natural sunlight activity (>99%) for photocatalytic removal of the organic pollutant. Various adsorption isotherms have been studied with excellent adsorption capability (Qmax = 454.54 mg/g) as compared to the literature. The study introduces GO both as a proficient stand-alone (sole) nanoadsorbent as well as a nanophotocatalyst for the efficient removal of organic dye pollutants in water treatment. Additionally, the article highlights the sustainable solar light-induced green chemistry aspects of GO as an excellent recyclable adsorbent as a result of its self-cleaning ability under natural sunlight, demonstrating its potential in real eco-friendly environmental and practical applications.

A Study of Methylene Blue Dye Interaction and Adsorption by Monolayer Graphene Oxide

The graphene oxide (GO) interaction with methylene blue (MB) cationic dye was studied in an aqueous solution at different pH during MB adsorption. The mutual interaction of MB with GO surface was studied and evaluated by Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD). The π-π and electrostatic interaction of MB with GO surface are the main types of interactions, and the XRD data show the monomeric arrangement of MB cation with GO. The GO surface functional groups and point of zero charge (PZC) were determined by acid-base titration. Suitability of zeta-potential measurement and acid-base titration method was briefly discussed. The quality of prepared GO was evaluated by Raman spectroscopy, XRD, and atomic force microscope (AFM). The experimental adsorption equilibrium data were analyzed using Langmuir, Langmuir-Freundlich, Freundlich, and Temkin isotherms. The GO maximum adsorption capacity increases with higher pH, that is ascribed to the facile interaction of negatively charged GO with positively charged MB structure.

Facile and green synthesis of reduced graphene oxide/loofah sponge for Streptomyces albulus immobilization and ε-poly-l-lysine production

Facile and green fabrication of reduced graphene oxide on loofah sponge (rGOLS) carrier was applied for cell immobilization of ε-Poly-l-lysine (ε-PL) production. Due to surface properties including large specific surface area, high polarity, and low interaction energy, rGOLS-1 was employed as the optimum rGOLS to enhance immobilization of Streptomyces albulus. Compared with raw LS, batch experiments showed rGOLS-1 facilitated superior cell vitality for ε-PL production due to the presence of reduced graphene oxide. In the sequential fed-batch cultivation of Streptomyces albulus using rGOLS-1 with an aerobic plant fibrous-bed bioreactor (rGOLS-1-AFPB), the maximum ε-PL concentration and productivity reached to 39.2 ± 0.63 g/L and 0.48 g/L/h. The cells immobilized in rGOLS-1 with high vitality and ε-PL production efficiency were reused six times over a period of 624 h. This research afforded an effective approach to enhance the fermentation performance of immobilized cells with the design of an advanced immobilization carrier.

Removal mechanism of Sb(III) by a hybrid rGO-Fe/Ni composite prepared by green synthesis via a one-step method

The annual influx of antimony (Sb) into the environment due to the widespread use of Sb compounds in industry and agriculture has become of global concern. Herein, a functional nanomaterial composite based on loading bimetallic iron/nickel nanoparticles on reduced graphene oxide (rGO-Fe/Ni) was initially prepared in a one-step phytogenic synthesis using a green tea extract. Subsequently, when applied for Sb(III) removal, the removal efficiency of rGO-Fe/Ni reached 69.7% within 3 h at an initial Sb concentration of 1.0 mg·L^-1. Advanced materials characterization via scanning electron microscopy-energy dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy revealed that Sb(III) was initially adsorbed onto the surface of rGO and then oxidized to Sb(V). This result was also supported by adsorption isotherm, kinetics, and thermodynamic analysis. These studies revealed that the adsorption was spontaneous and endothermic, following a Langmuir adsorption model with pseudo-second-order kinetics and allowed a Sb(III) removal mechanism based on adsorption and catalytic oxidation to be proposed. Furthermore, when rGO-Fe/Ni was practically used to remove Sb(III) in groundwater a 95.7% removal efficiency was obtained at 1 mg·L^-1 Sb(III), thus successfully demonstrating that rGO-Fe/Ni has significant potential for the practical remediation of Sb contaminated groundwater.

Comprehensive evaluation on removal of lead by graphene oxide and metal organic framework

Graphene oxide (GO) and metal-organic framework (MOF) as adsorbents were applied to removal of Pb(II) with comprehensive characterizations and various experimental conditions. Various characterizations were conducted to clarify the physico-chemical properties of adsorbents. The analyses of adsorption experiments included (i) dosage amounts, (ii) isotherm and kinetic studies, and (iii) several factors related to water chemistry (i.e., solution pH, background ions, and humic acid). The maximum equilibrium adsorption capacity (q_e) for Pb(II) using the GO and MOF was 555 and 108 mg g^-1, respectively, as determined in the optimum dosage experiments. Although the surface area of the MOF (629 m² g^-1) was much larger than that of the GO (19.8 m² g^-1), the adsorption capacity of the MOF was five times lower due to electrical repulsion. Thus, the MOF was utilized as the control group for comparison with the GO to evaluate the adsorption mechanisms in the experiments related to surface charge (i.e., under various pH and humic acid conditions). The adsorption isotherms and kinetics model determined using GO followed the Langmuir model (R² > 0.99) and pseudo-second-order model (R² > 0.99), respectively. Additionally, three adsorption-desorption cycles were conducted with the GO adsorbent to evaluate the maintenance of the removal ratio after regeneration and the equilibrium adsorption capacity was determined. Finally, the adsorption of other heavy metals (i.e., Cu(II), Cd(II), and Zn(II)), separately and in mixtures, was also evaluated to determine the selectivity of the adsorbents.

Effect of reduced graphene oxide on the structural, optical, adsorption and photocatalytic properties of iron oxide nanoparticles

Effect of reduced graphene oxide on the structural and photocatalytic properties of Fe₂O₃ nanoparticles.

Preparation and in vivo evaluation of a novel gel-based wound dressing using arginine–alginate surface-modified chitosan nanofibers

The development of an effective wound dressing with the ability to induce skin wound healing is a great challenge in medicine. Nanofibers are highly attractive for wound dressing preparation due to their properties such as hemostasis induction, good absorption of wound exudates, and facilitation of cell growth. Chitosan nanofibers have attracted great attention for application in wound dressings due to their accelerating effects on wound healing. In this study, arginine surface-modified chitosan nanofibers were successfully prepared by attachment of arginine molecules on the surface of chitosan nanofibers using sodium alginate through electrostatic interaction. The effect of pH on the amount of attached arginine was evaluated at three different pH values; 5, 6, and 7. Fourier-transform infrared spectroscopy and zeta potential of chitosan nanofibers before and after surface modification suggested the occurrence of the attachment of arginine to chitosan nanofibers. Scanning electron microscope images showed the nanofibrous structure of arginine surface-modified chitosan nanofibers with an average diameter ranging from 100 nm to 150 nm. The release of arginine from arginine surface-modified chitosan nanofibers gel showed a sustained release manner. The suitable viscosity and spreadability of arginine surface-modified chitosan nanofibers gel verified its easy application at the wound site. Arginine surface-modified chitosan nanofibers gel significantly improved the wound healing process including wound closure when tested in vivo using rat model. Additionally, histological examination and immunohistochemical studies showed the significant enhancement of the re-epithelialization, collagen deposition, and angiogenesis in the skin of the animal group treated with arginine surface-modified chitosan nanofibers gel compared with the other control groups. These results suggested that arginine surface-modified chitosan nanofibers gel could be introduced as an effective wound dressing.

Fabrication of 3-methoxyphenol sensor based on Fe3O4 decorated carbon nanotube nanocomposites for environmental safety: Real sample analyses

Iron oxide ornamented carbon nanotube nanocomposites (Fe3O4.CNT NCs) were prepared by a wet-chemical process in basic means. The optical, morphological, and structural characterizations of Fe3O4.CNT NCs were performed using FTIR, UV/Vis., FESEM, TEM; XEDS, XPS, and XRD respectively. Flat GCE had been fabricated with a thin-layer of NCs using a coating binding agent. It was performed for the chemical sensor development by a dependable I-V technique. Among all interfering analytes, 3-methoxyphenol (3-MP) was selective towards the fabricated sensor. Increased electrochemical performances for example elevated sensitivity, linear dynamic range (LDR) and continuing steadiness towards selective 3-MP had been observed with chemical sensor. The calibration graph found linear (R2 = 0.9340) in a wide range of 3-MP concentration (90.0 pM ~ 90.0 mM). The limit of detection and sensitivity were considered as 1.0 pM and 9×10-4 μAμM-1cm-2 respectively. The prepared of Fe3O4.CNT NCs by a wet-chemical progression is an interesting route for the development of hazardous phenolic sensor based on nanocomposite materials. It is also recommended that 3-MP sensor is exhibited a promising performances based on Fe3O4.CNT NCs by a facile I-V method for the significant applications of toxic chemicals for the safety of environmental and health-care fields.

Effect of Ce doping into ZnO nanostructures to enhance the phenolic sensor performance

Various Ce-doped ZnO nanostructures (Ce/ZnO NSs) were prepared by a facile wet chemical method using reducing agents in alkaline medium.

Novel graphene oxide sponge synthesized by freeze-drying process for the removal of 2,4,6-trichlorophenol

Graphene oxide (GO) spongy materials as environmental pollutant scavengers have drawn great attention owing to their ultralarge surface area, unique spongy structure and hydrogen-bonding interactions.