Effect of the Addition of Graphene Flakes on the Physical and Biological Properties of Composite Paints

In this study, graphene flakes were obtained using an electrolytic method and characterized using X-ray diffraction (XRD), Raman and FTIR spectroscopy, scanning and transmission electron microscopy (SEM/TEM). Graphene-based composites with varying concentrations of 0.5%, 1% and 3% by weight were prepared with acrylic paint, enamel and varnish matrices. The mechanical properties were evaluated using micro-hardness testing, while wettability and antimicrobial activity against three pathogens (Staphylococcus aureus 33591, Pseudomonas aeruginosa 15442, Candida albicans 10231) were also examined. The results indicate that the addition of graphene flakes significantly enhances both the mechanical and antimicrobial properties of the coatings.

Graphene Modification by Curcuminoids as an Effective Method to Improve the Dispersion and Stability of PVC/Graphene Nanocomposites

A large amount of graphene-related research is its use as a filler for polymer composites, including thin nanocomposite films. However, its use is limited by the need for large-scale methods to obtain high-quality filler, as well as its poor dispersion in the polymer matrix. This work presents polymer thin-film composites based on poly(vinyl chloride) (PVC) and graphene, whose surfaces were modified by curcuminoids. TGA, UV-vis, Raman spectroscopy, XPS, TEM, and SEM methods have confirmed the effectiveness of the graphene modification due to π-π interactions. The dispersion of graphene in the PVC solution was investigated by the turbidimetric method. SEM, AFM, and Raman spectroscopy methods evaluated the thin-film composite's structure. The research showed significant improvements in terms of graphene's dispersion (in solutions and PVC composites) following the application of curcuminoids. The best results were obtained for materials modified with compounds obtained from the extraction of the rhizome of Curcuma longa L. Modification of the graphene's surface with these compounds also increased the thermal and chemical stability of PVC/graphene nanocomposites.

Improving the Antimicrobial and Mechanical Properties of Epoxy Resins via Nanomodification: An Overview

The main purpose of this work is to provide a comprehensive overview on the preparation of multifunctional epoxies, with improved antimicrobial activity and enhanced mechanical properties through nanomodification. In the first section, we focus on the approaches to achieve antimicrobial activity, as well as on the methods used to evaluate their efficacy against bacteria and fungi. Relevant application examples are also discussed, with particular reference to antifouling and anticorrosion coatings for marine environments, dental applications, antimicrobial fibers and fabrics, and others. Subsequently, we discuss the mechanical behaviors of nanomodified epoxies with improved antimicrobial properties, analyzing the typical damage mechanisms leading to the significant toughening effect of nanomodification. Some examples of mechanical properties of nanomodified polymers are provided. Eventually, the possibility of achieving, at the same time, antimicrobial and mechanical improvement capabilities by nanomodification with nanoclay is discussed, with reference to both nanomodified epoxies and glass/epoxy composite laminates. According to the literature, a nanomodified epoxy can successfully exhibit antibacterial properties, while increasing its fracture toughness, even though its tensile strength may decrease. As for laminates-obtaining antibacterial properties is not followed by improved interlaminar properties.

Conjugates of Curcumin with Graphene and Carbon Nanotubes: A Review on Biomedical Applications

In the last decade, the use of carbon nanotubes and graphenes has been on the rise for various nanobiotechnological applications. Owing to their special characteristics, these two nanostructures of carbon allotropes have been studied for their capacity in the detection and treatment of many diseases. On the other hand, curcumin, a well-known antioxidant and anticancer natural product, is being extensively studied for numerous medicinal applications. Interestingly, many reports have shown great potentials of conjugates of curcumin and carbon nanotubes or graphenes. These conjugates, when properly designed and functionalized with biomolecules, could represent the valuable properties of each component alone while they could be effective in overcoming the poor solubility issues of both curcumin and Carbon Nanomaterials (CNMs). In this case, curcumin conjugates with CNMs seem to be very promising in biosensing applications and the detection of many biomolecules, especially, curcumin has been reported to be very effective with these conjugates. Also, the delivery of curcumin using functionalized SWCNTs was evaluated for its ability to load and release curcumin, to protect curcumin from degradation and to enhance its solubility. It is proposed that other properties of these conjugates are still to be discovered and the interdisciplinary approaches among biology, medicine, chemistry, and material engineering will accelerate the applications of these novel materials. This review aims to summarize the findings on the applications of CNM conjugates of curcumin.

Modulation of virulence in Enterococcus faecalis cells surviving antimicrobial photodynamic inactivation with reduced graphene oxide-curcumin: An ex vivo biofilm model

BACKGROUND

Enterococcus faecalis, as a major microorganism in persistent/secondary infections of endodontically treated teeth, is less likely to be eliminated during endodontic therapy. In this study, the effect of root canal disinfection and anti-virulence activities of photodynamic inactivation (PDI) of E. faecalis utilizing reduced graphene oxide-curcumin (rGO-Cur) as a photosensitizing agent following irradiation with light-emitting diode (LED), as well as intracellular ROS production were evaluated on ex vivo biofilms of E. faecalis in comparison with sodium hypochlorite (NaOCl) as the traditional endodontic irrigation solution.

MATERIALS AND METHODS

After formulation and confirmation of synthesized rGO-Cur using scanning electron microscopy (SEM), Fourier transformation infrared (FT-IR), UV-Vis spectra, dynamic light scattering (DLS), and Zeta potential, the minimum biofilm inhibitory concentrations (MBICs) and in vitro anti-biofilm activity of rGO-Cur, light-emitting diode (LED) at the wavelength of 435 ± 20 nm, and rGO-Cur-PDI were determined against 4-week-old pre-formed biofilms of E. faecalis. After preparation of ex vivo biofilm model in root canals, the ex-vivo anti-biofilm potential of rGO-Cur, LED, and rGO-Cur-PDI against E. faecalis were analyzed using the XTT assay and scanning electron microscopy (SEM) in comparison with NaOCl. The effects of sub-MBIC of rGO-Cur and NaOCl, sub-lethal dose of LED, and sub-significant inhibitory (SSI) potential of rGO-Cur-PDI for E. faecalis biofilms on virulence genes (efa, esp, gel, and fsr) expression of E. faecalis were analyzed using real-time polymerase chain reaction (qRT-PCR) assay. Intracellular reactive oxygen species (ROS) level was measured in rGO-Cur-PDI-treated bacterial cells compared to control cells with 2',7'-dichlorfluorescein-diacetate (DCFH-DA) fluorescent probe.

RESULTS

The FTIR, DLS, Zeta potential, SEM, and UV-Vis spectra analysis indicated the successful synthesis of rGO-Cur. The MBIC of rGO-Cur was 250 μg/ml, which inhibited the growth ofE. faecalis. LED showed insignificant anti-biofilm activity against E. faecalis even after treating for a long irradiation time (300 s). According to checkerboard assay, the MBIC value of rGO-Cur-PDI was reduced noticeably compared to the individual MBIC values of rGO-Cur and LED for E. faecalis. The expression levels of efa, esp, gel, and fsr genes in pre-formed E. faecalis biofilms were markedly reduced after rGO-Cur, rGO-Cur-PDI, and NaOCl treatment in comparison with the control group. Conversely, LED revealed no significant change in the expression of the virulence genes. The intracellular ROS assay showed a significant increase (8.3-fold) in rGO-Cur-PDI when compared to the control.

CONCLUSION

Our data support that rGO-Cur-PDI showed dual inhibitory effects on biofilm formation ability and virulence activity of E. faecalis with potential clinical applications for infection control in endodontics.

Sonochemically N-functionalized graphene oxide towards optically active photoluminescent bioscaffold

Herein, Nitrogen functionalized graphene oxide (N-f-GrO) has been synthesized using the sonochemical method. 2-Aminopyrimidine (APD) was used as a precursor for covalent functionalization with graphene oxide [f-(APD)GrO] as N-f-GrO which was ascertained with XPS. The involvement of arylamine group and formation of covalent bond over GrO surface was confirmed with high resolution C1s spectrum of f-(APD)GrO. Also, the signature of N1s peak in the survey spectrum of f-(APD)GrO has endorsed the surface modification of GrO through covalent functionalization. A bathochromic shift was observed for f-(APD)GrO in UV and enhanced weight loss of 91.39% at 191.80 °C, confirms a facile functionalization of GrO via formation of amide bond, where the terminal -OH portal of carboxylic group is substituted by 2-Aminopyrimidine. Moreover, the formation of f-(APD)GrO was investigated with various analytical techniques like Raman, XRD and FTIR. The surface morphology and topography have been understood by using HRTEM/SAED, AFM, and SEM analysis. The synthesized f-(APD)GrO shows potential optically active photoluminescence properties and higher potency towards biological insight. The identified photoluminescence (PL) peaks at 3.78, 3.21 2.01 and 1.64 eV indicate photon emission including an orange optical transition at 2.01 eV. The multiple peaks in a PL spectrum are due to radiative and non-radiative recombinations which are also associated with excess hole (h⁺)-electron (e^-) trapping on the surface to restrict the recombinations of e^- and h⁺. The biological activity of N-f-GrO has been explored with Sulforhodamine B (SRB) assay on HaCaT and Vero cell lines. The concentration-dependent cell viabilities have been observed a maximum at 20 µg/ml for HaCaT and at 10 µg/ml for Vero cell lines at testing concentration range of 10-80 μg mL^-1. The significant morphological impact on cell lines confirms the cytocompatibility behaviour. Therefore, the synergistic impact of various properties of f-(APD)GrO can be further explored to study its significance as nanocarrier for photosensitive biomedical response.

Surface-Induced in Situ Sonothermodynamically Controlled Functionalized Graphene Oxide for in Vitro Cytotoxicity and Antioxidant Evaluations

Graphene oxide-based advanced functional materials offer an ultimate solution for wider biomedical applications. In situ thermodynamically ultrasound-assisted direct covalent functionalization of graphene oxide (GO) with sulfanilamide (SA) has synthesized f-(SA)GO. Raman spectroscopy, X-ray diffraction, high-resolution transmission electron microscopy, selected area electron diffraction pattern, scanning electron microscopy, atomic force microscopy, Fourier transform infrared spectroscopy, ultraviolet-visible spectroscopy, thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC) have analyzed the f-(SA)GO structure for functional activities, expressed through synergistic impact of heteroatomic domains (SIHAD). The TGA of GO and f-(SA)GO demonstrates their total weight losses of 82.0 and 61.1%, respectively. Enhanced thermal stability of f-(SA)GO infers an exothermic behavior obtained with DSC. The surface-induced in situ thermodynamically controlled nonspontaneous reaction for f-(SA)GO has facilitated calculations for activation energy (E a) = - 2.65 × 103 kJ mol-1 and Gibbs free energy (ΔG) = 8.3741 kJ mol-1, energetics for biological activities with sulforhodamine B assay on MCF-7 and Vero cell lines and antioxidant potential by free radical scavenging activity with DPPH (2,2-diphenyl-1-picrylhydrazyl). Cell viabilities are >89.8% for Vero and >90.1% for MCF-7 with f-(SA)GO over 10 to 80 μg mL-1. Its cytocompatibility infers establishment of a new material. The morphological effect on MCF-7 and Vero cell lines confirm its structurally stable biocompatibility. The SIHAD of f-(SA)GO scavenges radical activity, and its heteroatomic structure causes valuable physiochemical activities. f-(SA)GO could emerge as an advanced functional biomaterial for structurally and thermally stable biocompatible nanocoatings.

Curcumin-loaded graphene oxide flakes as an effective antibacterial system against methicillin-resistant Staphylococcus aureus

Methicillin-resistant Staphylococcus aureus (MRSA) is responsible for serious hospital infections worldwide and represents a global public health problem. Curcumin, the major constituent of turmeric, is effective against MRSA but only at cytotoxic concentrations or in combination with antibiotics. The major issue in curcumin-based therapies is the poor solubility of this hydrophobic compound and the cytotoxicity at high doses. In this paper, we describe the efficacy of a composite nanoparticle made of curcumin (CU) and graphene oxide (GO), hereafter GOCU, in MRSA infection treatment. GO is a nanomaterial with a large surface area and high drug-loading capacity. GO has also antibacterial properties due mainly to a mechanical cutting of the bacterial membranes. For this physical mechanism of action, microorganisms are unlikely to develop resistance against this nanomaterial. In this work, we report the capacity of GO to support and stabilize curcumin molecules in a water environment and we demonstrate the efficacy of GOCU against MRSA at a concentration below 2 µg ml-1. Further, GOCU displays low toxicity on fibroblasts cells and avoids haemolysis of red blood cells. Our results indicate that GOCU is a promising nanomaterial against antibiotic-resistant MRSA.

PEGylated graphene oxide-based nanocomposite-grafted chitosan/polyvinyl alcohol nanofiber as an advanced antibacterial wound dressing

Designing composite nanomaterials that display multiple antibacterial mechanisms offers new prototypes against bacterial resistance.

Facile synthesis of water soluble silver ferrite (AgFeO2) nanoparticles and their biological application as antibacterial agents

The syntheses and antibacterial activity of AgFeO₂ and AgFO₂ modified polyethylene glycols are reported.