Functionalized graphene oxide by 4-amino-3-hydroxy-1-naphthalenesulfonic acid as a heterogeneous nanocatalyst for the one-pot synthesis of tetraketone and tetrahydrobenzo[b]pyran derivatives under green conditions

4-Amino-3-hydroxy-1-naphthalenesulfonic acid-functionalized graphene oxide (GO-ANSA) was prepared and characterized using different spectroscopic, microscopic and analytical methods including energy-dispersive X-ray spectroscopy (EDS), EDS elemental mapping, Fourier-transform infrared (FT-IR) spectroscopy, field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), and thermogravimetry/differential thermogravimetry analysis (TGA/DTA). The obtained nanomaterial was used as a novel, highly efficient, and reusable solid acid carbocatalyst for the one-pot three-component synthesis of tetraketone, as well as tetrahydrobenzo[b]pyran derivatives via tandem Knoevenagel-Michael reactions under green conditions. All of the derivatives were prepared in EtOH, as a green solvent, under reflux conditions in high to excellent yields and very short reaction times. The nanocatalyst was recovered and reused at least five times without significant reduction in its activity. In addition, the absence of toxic transition metals, high to excellent yields, mild reaction conditions, simple procedure for the separation and purification of products, stability, and recycling of the catalyst are the most important advantages of this green procedure.

Recyclable mesalamine-functionalized magnetic nanoparticles (mesalamine/GPTMS@SiO2@Fe3O4) for tandem Knoevenagel-Michael cyclocondensation: grinding technique for the synthesis of biologically active 2-amino-4H-benzo[b]pyran derivatives

In the present study, mesalamine-functionalized on magnetic nanoparticles (mesalamine/GPTMS@SiO2@Fe3O4) is fabricated as an efficient and magnetically recoverable nanocatalyst. The as-prepared nanocatalyst was successfully synthesized in three steps using a convenient and low-cost method via modification of the surface of Fe3O4 nanoparticles with silica and GPTMS, respectively, to afford GPTMS@SiO2@Fe3O4. Finally, treatment with mesalamine as a powerful antioxidant generates the final nanocatalyst. Then, its structure was characterized by FT-IR, SEM, TEM, EDX, XRD, BET, VSM, and TGA techniques. The average size was found to be approximately 38 nm using TEM analysis and the average crystallite size was found to be approximately 27.02 nm using XRD analysis. In particular, the synthesized nanocatalyst exhibited strong thermal stability up to 400 °C and high magnetization properties. The activity of the synthesized nanocatalyst was evaluated in the tandem Knoevenagel-Michael cyclocondensation of various aromatic aldehydes, dimedone and malononitrile under a dry grinding method at room temperature to provide biologically active 2-amino-4H-benzo[b]pyran derivatives products in a short time with good yields. The presented procedure offers several advantages including gram-scale synthesis, good green chemistry metrics (GCM), easy fabrication of the catalyst, atom economy (AE), no use of column chromatography, and avoiding the generation of toxic materials. Furthermore, the nanocatalyst can be reused for 8 cycles with no loss of performance by using an external magnet.

SO3H-Functionalized Epoxy-Immobilized Fe3O4 Core-Shell Magnetic Nanoparticles as an Efficient, Reusable, and Eco-Friendly Catalyst for the Sustainable and Green Synthesis of Pyran and Pyrrolidinone Derivatives

A SO₃H-functionalized epoxy-immobilized Fe₃O₄ core-shell magnetic nanocatalyst was prepared through a simple three-step procedure, and it was identified by various analyses such as Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM), differential thermal gravity (DTG), Brunauer-Emmett-Teller (BET) analysis, transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), thermogravimetric analysis (TGA), vibration sample magnetometry (VSM), and powder X-ray diffraction (PXRD). BET analysis showed that the as-prepared nanocatalyst was synthesized with a mesoporous structure and high specific area (35.45 m² g^-1). The TEM image clearly showed that the particle size distribution was in the range of 47-65 nm. The designed magnetic nanocatalyst was used successfully in the synthesis of pyran derivatives via the reaction of dimedone, malononitrile, and various aromatic aldehydes and synthesis of pyrrolidinone derivatives via the reaction of various aromatic aldehydes, aniline, and diethyl acetylenedicarboxylate. The nanocatalyst was simply isolated from the reaction mixture utilizing an external magnet and reused several times according to the model reactions without significant loss in its efficiency.

A new role for concentrated solar radiation (CSR) as a renewable heat source for the catalyst-solvent free synthesis of tetrahydrobenzo[b]pyran scaffolds

Increased energy consumption as a result of population growth and industrialization necessitates the use of renewable energy sources in the field of chemistry. Nonrenewable energy sources release not only greenhouse gases but also other hazardous pollutants that are damaging to all living things. This plainly mandates the researchers' use of a renewable energy source that is both environmentally friendly and cost-effective. This study shows that a renewable energy source (sunlight) can be used to synthesize tetrahydrobenzo[b]pyran scaffolds using the Knoevenagel-Michael cyclocondensation of aldehyde derivatives, malononitrile, and dimedone via a three-condensation domino reaction. This research establishes a new role for solar energy as a renewable energy source for the synthesis of tetrahydrobenzo[b]pyran scaffolds under catalyst-solvent-free conditions, with outstanding yields, shorter reaction time, and great atom economy. This cyclization may also be done on a gram scale with free, safe, and clean energy from concentrated solar radiation (CSR), indicating the reaction's potential for industrial applications.

Methylene Blue as a Photo-Redox Catalyst: The Development Synthesis of Tetrahydrobenzo[b]pyran Scaffolds via a Single-Electron Transfer/Energy Transfer

In a green tandem reaction using aldehyde derivatives, malononitrile, and dimedone, a radical tandem Knoevenagel–Michael cyclocondensation reaction of tetrahydrobenzo[b]pyran scaffolds was developed. Using visible light as a sustainable energy source, methylene blue (MB⁺)-derived photo-excited state functions were employed in an aqueous solution as single-electron transfer (SET) and energy transfer catalysts. The range of yields is quite uniform (81–98%, average 92.18%), and the range of reaction time is very fast (2–7 min, average 3.7 min), and the point mentioned in the discussion is that the procedure tolerates a range of donating and withdrawing groups, while still giving very excellent yields. The reaction is fairly insensitive to the nature of the substituents. Research conducted in this project aims to develop a non-metallic cationic dye that is both inexpensive and widely available for more widespread use. In addition to energy efficiency and environmental friendliness, methylene blue also offers an excellent atom economy, time-saving features, and ease of use. As a result, a wide range of long-term chemical and environmental properties can be obtained. The turnover number and turnover frequency of tetrahydrobenzo[b]pyran scaffolds have been computed. Surprisingly, gram-scale cyclization is a possibility, implying that the technology may be applied in industries.

A New Pathway for the Preparation of Pyrano[2,3-c]pyrazoles and molecular Docking as Inhibitors of p38 MAP Kinase

We report a new pathway to synthesize pyrano[2,3-c]pyrazoles and their binding mode to p38 MAP kinase. Pyrano[2,3-c]pyrazole derivatives have been prepared through a four-component reaction of benzyl alcohols, ethyl acetoacetate, phenylhydrazine, and malononitrile in the presence of sulfonated amorphous carbon and eosin Y as catalysts. All products were characterized by melting point, ¹H and ¹³C NMR, and HRMS (ESI). The products were screened in silico for their binding activities to both the ATP-binding pocket and the lipid-binding pocket of p38 MAP kinase, using a structure-based flexible docking provided by the engine ADFR. The results showed that eight synthesized compounds had a higher affinity to the lipid pocket than to the other target site, which implied potential applications as allosteric inhibitors. Finally, the most biologically active compound, 5, had a binding affinity comparable to those of other proven lipid pocket inhibitors, with affinity to the target pocket reaching -10.9932 kcal/mol, and also had the best binding affinity to the ATP-binding pockets in all of our products. Thus, our research provides a novel pathway for synthesizing pyrano[2,3-c]pyrazoles and bioinformatic evidence for their biological capability to block p38 MAP kinase pockets, which could be useful for developing cancer or immune drugs.

Catalytic Approaches to Multicomponent Reactions: A Critical Review and Perspectives on the Roles of Catalysis

In this review, we comprehensively describe catalyzed multicomponent reactions (MCRs) and the multiple roles of catalysis combined with key parameters to perform these transformations. Besides improving yields and shortening reaction times, catalysis is vital to achieving greener protocols and to furthering the MCR field of research. Considering that MCRs typically have two or more possible reaction pathways to explain the transformation, catalysis is essential for selecting a reaction route and avoiding byproduct formation. Key parameters, such as temperature, catalyst amounts and reagent quantities, were analyzed. Solvent effects, which are likely the most neglected topic in MCRs, as well as their combined roles with catalysis, are critically discussed. Stereocontrolled MCRs, rarely observed without the presence of a catalytic system, are also presented and discussed in this review. Perspectives on the use of catalytic systems for improved and greener MCRs are finally presented.

Magnetic Nanoparticles Functionalized with Copper Hydroxyproline Complexes as an Efficient, Recoverable, and Recyclable Nanocatalyst: Synthesis and Its Catalytic Application in a Tandem Knoevenagel-Michael Cyclocondensation Reaction

A novel catalyst has been afforded by attaching of a Cu(proline)₂ complex to magnetic nanoparticles through cheap, simple, and readily available chemicals. This catalyst was characterized by Fourier transform infrared, energy-dispersive X-ray, X-ray diffraction, vibrating-sample magnetometry, transmission electron microscopy, scanning electron microscopy, and inductively coupled plasma analyses. The catalytic activity of the Fe₃O₄@NH₂@TCT@HProCu nanocatalyst was investigated in a green and effective synthesis of pyran derivatives in high yields by applying three-component reactions of malononitrile, dimedone, and aldehydes in ethanol. Conversion was high under optimal conditions. The obtained nanocatalyst could be easily separated from the mixture of the reaction and was recyclable nine times via a simple magnet without considerable reduction of its catalytic efficiency. Operational simplicity, high product yields, environmental friendliness, ecofriendliness, economical processing, and easy workup are the features of this methodology.

Halloysite Nanoclay with High Content of Sulfonic Acid-Based Ionic Liquid: A Novel Catalyst for the Synthesis of Tetrahydrobenzo[b]pyrans

One of the main drawbacks of supported ionic liquids is their low loading and consequently, low activity of the resultant catalysts. To furnish a solution to this issue, a novel heterocyclic ligand with multi imine sites was introduced on the surface of amino-functionalized halloysite support via successive reactions with 2,4,6-trichloro-1,3,5-triazine and 2-aminopyrimidine. Subsequently, the imine sites were transformed to sulfonic acid-based ionic liquids via reaction with 1,4-butanesultone. Using this strategy, high loading of ionic liquid was loaded on halloysite nanoclay. The supported ionic liquid was then characterized with XRD, SEM, TEM, EDS, FTIR, BET, TGA and elemental mapping analysis and utilized as a metal-free Brønsted acid catalyst for promoting one-pot reaction of aldehydes, dimedone and malononitrile to furnish tetrahydrobenzo[b]pyrans. The catalytic tests confirmed high performance of the catalyst. Moreover, the catalyst was stable upon recycling.

Synthesis, DFT calculation, pharmacological evaluation, and catalytic application in the synthesis of diverse pyrano[2,3-c]pyrazole derivatives

Pyranopyrazole and its derivatives are classified to be a pharmacologically significant active scaffold for almost all modes of biological activities. In this work, An efficient, green, and facile three-component reaction for preparing pyrano[2,3-c]pyrazole derivatives via the condensation reaction of 5-methyl-2-phenyl-2,4-dihydro-3H-pyrazol-3-one, ethyl acetoacetate, and malononitrile in the presence of ZnO Nanoparticle. The products are produced with high yields and in shorter reaction times. It also is mild, safe, green, and environmentally friendly. The geometric parameters such as dipole moment, bond length, dihedral angles, total energy, heat of formation, atomic charges and energies at a highly accurate for prepared compounds were computed by Denisty Functional Theory along with the B3LYP functional. The newly synthesized compounds were screened for their anti-inflammatory and antioxidant activity. Some of the tested compounds displayed promising activities. The newly prepared compounds were found to be potent towards the antioxidant activity. Results indicated that compounds 11 and 12 exhibited significant (p ≥ 0.05) in vitro total antioxidant activity as 44.93 ± 0.15 and 39.60 ± 0.10 U/ML, respectively higher than standard ascorbic acid (29.40 ± 0.62).

Ligand Free One-Pot Synthesis of Pyrano[2,3-c]pyrazoles in Water Extract of Banana Peel (WEB): A Green Chemistry Approach

Here, we have developed a novel, simple, efficient, and green protocol for one-pot synthesis of pyrano[2,3-c]pyrazole using arylidene malononitrile and pyrazolone in Water Extract of Banana Peels (WEB) as a reaction medium at room temperature (r.t.). This is a green and general synthetic protocol without utilization of any toxic organic solvent, ligand, base that could be applicable for the wide substrate scope in good to excellent yields. This protocol has various advantages such as fast reactions, eco-friendly reaction conditions, easy isolation of the product without using column chromatography. The green chemistry matrices calculation like atom economy reaction, environmental factor, as well as process mass intensity indicates the eco-friendly nature of the protocol.

Synthesis of new 3H-chromeno[2,3-d]pyrimidine-4,6(5H,7H)-diones via the tandem intramolecular Pinner/Dimroth rearrangement

The reaction of 2-amino-4-aryl-7,7-dimethyl-5-oxo-5,6,7,8-tetrahydro-4H-chromene-3-carbonitriles with excess aliphatic carboxylic acids in the presence of phosphoryl chloride (POCl3) afforded new 2-alkyl-5-aryl-8,8-dimethyl-8,9-dihydro-3H-chromeno[2,3-d]pyrimidine-4,6(5H,7H)-diones in high yields. The suggested mechanism involves a tandem intramolecular Pinner/Dimroth rearrangement. The synthesized compounds were characterized by infrared (IR), proton nuclear magnetic resonance (1H NMR), carbon-13 nuclear magnetic resonance (13C NMR) and elemental analysis.