A dual emitting CsPbBr3/Eu-BDC composite as a ratiometric photoluminescent turn-on probe for aliphatic amine sensing

The impressive photoluminescence properties of all inorganic cesium lead halide perovskite quantum dots (PeQDs) make them highly intriguing for fluorescence chemosensor applications. Herein, a ratiometric dual emitting perovskite-based sensor was designed by synthesizing fluorescent CsPbBr3 PeQDs in situ within a matrix of Eu-BDC (Eu(III) benzene-1,4-dicarboxylate). The results presented here establish the suggested sensor's quick and selective turn-on PL response to volatile primary aliphatic amine derivatives. In the presence of amines, the designed CsPbBr3/Eu-BDC sensor exhibits an enhancement of the PL signal of CsPbBr3 at 518 nm and the Eu-BDC signal at 615 nm served as a standard for constructing the ratiometric sensing system. Thereby, a visual color change from red to green was observed with the incremental addition of methylamine to the probe. A low detection limit of 0.083 ppm was determined for methylamine. In both the solution and vapor phases, this ratiometric sensor responds to a variety of primary aliphatic amines with very quick and strong fluorescence. Moreover, the sensor was effectively used for monitoring meat spoilage owing to the emission of biogenic amine vapor from meat products.

Molecularly imprinted fluorescence assay based on lead halide perovskite quantum dots for determination of benzo(a)pyrene

Molecularly imprinted polymers with methylammonium lead halide perovskite quantum dots (MIP@MAPbBr3 PQDs) have been prepared and applied to the determination of benzo(a)pyrene (BaP) for the first time. The photoluminescence (PL) of MIP@MAPbBr3 PQDs was enhanced due to the surface passivation of defects by BaP. PL excitation and emission spectra, X-ray diffraction, Fourier transform infrared, and time-resolved PL studies suggest that the interaction between MIP@MAPbBr3 PQDs and BaP is a dynamic process. After MIP@MAPbBr3 PQDs were incubated with BaP, the benzene ring in the molecular structure of BaP can interact with MIP@MAPbBr3 PQDs through π electrons, which reduces non-radiative recombination of MIP@MAPbBr3 PQDs and lengthens excited state lifetime. The PL intensity of the MIP@MAPbBr3 PQDs-BaP system was monitored at 520 nm with 375 nm excitation. Under optimized conditions, the PL intensity of MIP@MAPbBr3 PQDs is linear with the concentration of BaP in the 10 to 100 ng·mL-1 range, with a detection limit of 1.6 ng·mL-1. The imprinting factor was 3.9, indicating excellent specificity of MIP@MAPbBr3 PQDs for BaP. The MIP@MAPbBr3 PQDs were subsequently applied to the PL analysis of BaP in sunflower seed oil, cured meat, and grilled fish samples, achieving recoveries from 79.3 to 107%, and relative standard deviations below 10%. This molecularly imprinted fluorescence assay improves the selectivity of BaP in complex mixtures and could be extended to other analytes.

3D printed optical sensor for highly sensitive detection of picric acid using perovskite nanocrystals and mechanism of photo-electron transfer

Hand-held, compact and portable sensors for on-site detection of environmental contaminants are in high demand for industry 4.0. Here, we have developed a sensor based on luminescent organic-inorganic metal halide hybrid perovskites nanocrystals (CH₃NH₃PbBr₃) with p-xylylenediamine as an additional capping agent for highly sensitive and selective detection of picric acid (PA), with a good linear range of 1.8 μM-14.3 μM achieving detection of limit (LOD) of 0.3 μM. The electrostatic interaction between PA and the capping ligand of perovskite nanocrystals resulted in significant fluorescence quenching, as revealed by the steady-state and time-resolved spectroscopy. The applicability of the developed sensor for PA detection was validated with a 3D printed device integrating surface mounting device (SMD) and paper microfluidics. This prototype device was successfully applied as a fluorescence turn-off sensor to detect PA, showing great potential for on-site detection. This 3D-printed paper-based microfluidic optical sensor proved very efficient for naked-eye detection of PA with an inbuilt excitation source, avoiding the requirement of expensive and complex instrumentation.

Recent Progress of Perovskite Nanocrystals in Chem/Bio Sensing

Perovskite nanocrystals (PNCs) are endowed with extraordinary photophysical properties such as wide absorption spectra, high quantum yield, and narrow emission bands. However, the inherent shortcomings, especially the instability in polar solvents and water incompatibility, have hindered their application as probes in chem/bio sensing. In this review, we give a fundamental understanding of the challenges when using PNCs for chem/bio sensing and summarize recent progress in this area, including the application of PNCs in various sensors and the corresponding strategies to maintain their structural integrity. Finally, we provide perspectives to promote the future development of PNCs for chem/bio sensing applications.

Recent Advances in Ligand Design and Engineering in Lead Halide Perovskite Nanocrystals

Lead halide perovskite (LHP) nanocrystals (NCs) have recently garnered enhanced development efforts from research disciplines owing to their superior optical and optoelectronic properties. These materials, however, are unlike conventional quantum dots, because they possess strong ionic character, labile ligand coverage, and overall stability issues. As a result, the system as a whole is highly dynamic and can be affected by slight changes of particle surface environment. Specifically, the surface ligand shell of LHP NCs has proven to play imperative roles throughout the lifetime of a LHP NC. Recent advances in engineering and understanding the roles of surface ligand shells from initial synthesis, through postsynthetic processing and device integration, finally to application performances of colloidal LHP NCs are covered here.

Environment-Induced Reversible Modulation of Optical and Electronic Properties of Lead Halide Perovskites and Possible Applications to Sensor Development: A Review

Lead halide perovskites are currently widely investigated as active materials in photonic and optoelectronic devices. While the lack of long term stability actually limits their application to commercial devices, several experiments demonstrated that beyond the irreversible variation of the material properties due to degradation, several possibilities exist to reversibly modulate the perovskite characteristics by acting on the environmental conditions. These results clear the way to possible applications of lead halide perovskites to resistive and optical sensors. In this review we will describe the current state of the art of the comprehension of the environmental effects on the optical and electronic properties of lead halide perovskites, and of the exploitation of these results for the development of perovskite-based sensors.

Review on Sensing Applications of Perovskite Nanomaterials

Recently, perovskite-based nanomaterials are utilized in diverse sustainable applications. Their unique structural characteristics allow researchers to explore functionalities towards diverse directions, such as solar cells, light emitting devices, transistors, sensors, etc. Many perovskite nanomaterial-based devices have been demonstrated with extraordinary sensing performance to various chemical and biological species in both solid and solution states. In particular, perovskite nanomaterials are capable of detecting small molecules such as O2, NO2, CO2, etc. This review elaborates the sensing applications of those perovskite materials with diverse cations, dopants and composites. Moreover, the underlying mechanisms and electron transport properties, which are important for understanding those sensor performances, will be discussed. Their synthetic tactics, structural information, modifications and real time sensing applications are provided to promote such perovskite nanomaterials-based molecular designs. Lastly, we summarize the perspectives and provide feasible guidelines for future developing of novel perovskite nanostructure-based chemo- and biosensors with real time demonstration.

Perovskite nanocrystals fluorescence nanosensor for ultrasensitive detection of trace melamine in dairy products by the manipulation of inner filter effect of gold nanoparticles

Barium sulfate-coated CsPbBr₃ perovskite nanocrystals (CsPbBr₃ NCs@BaSO₄) was successfully synthesized that exhibited stable and intense fluorescence property in aqueous buffer. With the CsPbBr₃ NCs@BaSO₄ as signal readout, an ultrasensitive fluorescence nanosensor was developed for turn-on determination of melamine by the manipulation of inner filter effect of citrate-protected gold nanoparticles (AuNPs). The fluorescence of the CsPbBr₃ NCs@BaSO₄ was remarkably quenched by the AuNPs due to inner filter effect. This inner filter effect could be weakened by the addition of melamine as a result of melamine-triggering aggregation of the AuNPs and subsequently led to a recovery in the fluorescence of the CsPbBr₃ NCs@BaSO₄. The recovery ratio was proportional to the concentration of melamine in the range of 5.0-500.0 nmol/L. The limit of detection was 0.42 nmol/L and the relative standard deviation was 4.0% for the repetitive determination of 500.0 nmol/L melamine solution (n = 11). The nanosensor was successfully applied to analysis of melamine in dairy product samples.

From aerospace to screen: Multifunctional poly(benzoxazine)s based on different triarylamines for electrochromic, explosive detection and resistance memory devices

Four kinds of main-chain benzoxazine polymers (PBZ) containing triarylamine (TAA) units were synthesized by Mannich reaction and characterized by ¹H nuclear magnetic resonance (NMR), Fourier transform infrared (FT-IR) techniques, etc. Thermal, optical, photophysical and electrochemical properties were studied. The 50% of char residue is left in N₂ at 800 °C. The polymers are soluble in common organic solvents and easily spin-coated onto indium‑tin oxide (ITO) coated glass substrates. All the polymers have voltage window ranging from 0 to 1.8 V, and the colors change from yellowish to dark red when voltage is applied. Meanwhile, device assembled from polymer exhibit significant color changes. Furthermore, the polymers also have promising potential application in explosive detection and resistance memory devices.

Doping and ion substitution in colloidal metal halide perovskite nanocrystals

The past decade has witnessed tremendous advances in synthesis of metal halide perovskites and their use for a rich variety of optoelectronics applications. Metal halide perovskite has the general formula ABX3, where A is a monovalent cation (which can be either organic (e.g., CH3NH3+ (MA), CH(NH2)2+ (FA)) or inorganic (e.g., Cs+)), B is a divalent metal cation (usually Pb2+), and X is a halogen anion (Cl-, Br-, I-). Particularly, the photoluminescence (PL) properties of metal halide perovskites have garnered much attention due to the recent rapid development of perovskite nanocrystals. The introduction of capping ligands enables the synthesis of colloidal perovskite nanocrystals which offer new insight into dimension-dependent physical properties compared to their bulk counterparts. It is notable that doping and ion substitution represent effective strategies for tailoring the optoelectronic properties (e.g., absorption band gap, PL emission, and quantum yield (QY)) and stabilities of perovskite nanocrystals. The doping and ion substitution processes can be performed during or after the synthesis of colloidal nanocrystals by incorporating new A', B', or X' site ions into the A, B, or X sites of ABX3 perovskites. Interestingly, both isovalent and heterovalent doping and ion substitution can be conducted on colloidal perovskite nanocrystals. In this review, the general background of perovskite nanocrystals synthesis is first introduced. The effects of A-site, B-site, and X-site ionic doping and substitution on the optoelectronic properties and stabilities of colloidal metal halide perovskite nanocrystals are then detailed. Finally, possible applications and future research directions of doped and ion-substituted colloidal perovskite nanocrystals are also discussed.

CH3NH3Br solution as a novel platform for the selective fluorescence detection of Pb2+ ions

The development of a simple fluorescent sensor for detecting the Pb²⁺ heavy metal is fundamentally important. The CH₃NH₃PbBr₃ perovskite material exhibits excellent photoluminescence properties that are related to Pb²⁺. Based on the effects of Pb²⁺ on the luminescent properties of CH₃NH₃PbBr₃, we design a novel platform for the selective fluorescence detection of Pb²⁺ ions. Herein, we use a CH₃NH₃Br solution at a high concentration as the fluorescent probe. Incorporation of PbBr₂ into the CH₃NH₃Br solution results in a rapid chemical reaction to form CH₃NH₃PbBr₃. Hence, the nonfluorescent CH₃NH₃Br material displays a sensitive and selective luminescent response to Pb²⁺ under UV light illumination. Moreover, the reaction between CH₃NH₃Br and PbBr₂ could transform Pb²⁺ into CH₃NH₃PbBr₃, and therefore, CH₃NH₃Br may also be used to extract Pb²⁺ from liquid waste in recycling applications.

A study of structural phase transitions and optoelectronic properties of perovskite-type hydride MgFeH3: ab initio calculations

In this study, the structural phase transition and optoelectronic properties of perovskite-hydride MgFeH₃ under high pressure have been performed by ab initio calculations based on GGA-PBE functional. The phase transitions were observed from the cubic structure ([Formula: see text]) to the orthorhombic [Formula: see text] and [Formula: see text] structure. During the phase transition, the [Formula: see text] and [Formula: see text] intermediate phases were predicted. The energy-volume (E-V) relationships show that the most stable phase is [Formula: see text]. The lattice parameters and volume increased as based on the phase transforms. From the electronic band analysis, the MgFeH₃ shows a metallic character from the cubic to orthorhombic structure. The MgFeH₃ indicates the peaks at 2.67 eV (464 nm) for [Formula: see text] phase, 5.21 eV (238 nm) for [Formula: see text] phase and 2.63 eV (471 nm) for [Formula: see text] phase. [Formula: see text] and [Formula: see text] phases correspond to the visible region. The absorption peaks are getting wider and have higher magnitude from [Formula: see text] to [Formula: see text] phase. The optical conductivity for the cubic structure with [Formula: see text] phase was found to be higher than orthorhombic structures with [Formula: see text], and [Formula: see text] phases. The reflectivity maxima decrease from [Formula: see text] to [Formula: see text].

Cation Alloying Delocalizes Polarons in Lead Halide Perovskites

Recently, mixed-cation perovskites have promised enhanced performances concerning stability and efficiency in optoelectronic devices. Here, we report a systematic study on the effects of cation alloying on polaronic properties in cation-alloyed perovskites using first principle calculations. We find that cation alloying significantly reduces the polaron binding energies for both electrons and holes compared to pure methylammonium lead iodide (MAPbI₃). This is rationalized in terms of crystal symmetry reduction that causes polarons to be more delocalized. Electron polarons undergo large Jahn-Teller distortions (∼15-30%), whereas hole polarons tend to shrink the lattice by ∼5%. Such different lattice distortion footprints could be utilized to distinguish the type of polarons. Finally, our simulations show that Cs, formamidinium (FA), and MA mixtures can effectively minimize polaron binding energy while weakly affecting band gap, in a good agreement with experimental findings. These modeling results can guide future development of halide perovskite materials compositions for optoelectronic applications.

Linear assembly of lead bromide-based nanoparticles inside lead(ii) polymers prepared by mixing the precursors of both the nanoparticle and the polymer

Preparation of 1D assemblies of lead halide-based nanoparticles inside a lead bromide polymer by concurrent formation of lead(ii) oligomers and the nanoparticles in the presence of cyclohexanemethylammonium bromide.

Geometry Distortion and Small Polaron Binding Energy Changes with Ionic Substitution in Halide Perovskites

Halide perovskites have demonstrated remarkable performance in optoelectronic applications. Despite extraordinary progress, questions remain about device stability. We report an in-depth computational study of small polaron formation, electronic structure, charge density, and reorganization energies of several experimentally relevant halide perovskites using isolated clusters. Local lattice symmetry, electronic structure, and electron-phonon coupling are interrelated in polaron formation in these materials. To illustrate this, first-principles calculations are performed on (MA/Cs/FA)Pb(I/Br)₃ and MASnI₃. Across the materials studied, electron small polaron formation is manifested by Jahn-Teller-like distortions in the central octahedron, with apical PbI bonds expanding significantly more than the equatorial bonds. In contrast, hole polarons cause the central octahedron to uniformly contract. This difference in manifestation of electron and hole polaron formation can be a tool to determine what is taking place in individual systems to systematically control performance. Other trends as the anion and cations are changed are established for optimization in specific optoelectronic applications.

Surface engineering for improved stability of CH3NH3PbBr3 perovskite nanocrystals

Organohalide perovskite nanocrystals (NCs) with a variety of nano-scale structures and morphologies have shown promising potential owing to their size- and composition-dependent optoelectronic properties. Despite extensive studies on their size-dependent optical properties, a lack of understanding on their morphological transformation and the relevant stability issues limits a wide range of applications. Herein, we hypothesize a mechanism for the morphological transformation of perovskite NCs, which leads to dissolving NCs and forming microscale rectangular grains, resulting in a reduction of photoluminescence. We found that the morphological transformation from nanocrystal solids to microscale rectangular solids occurs via Ostwald ripening. A surface treatment with a surfactant suppresses the transformation, resulting in nearly monodisperse NCs with a square shape (∼20 nm edge size), and thus improves the stability of NC solution, as well as their photoluminescence performance and quantum yield (PLQY = 82%). Furthermore, we employed similar amine derivatives to investigate the effect of a molecular architecture (i.e. steric hindrance) on perovskite NC stability, which exhibited much enhanced PLQY (93%). These experimental results provide new insights into the fundamental relationship between the physical properties and the structure of perovskite nanocrystals required to understand their diverse optoelectronic properties.

Structural effects on optoelectronic properties of halide perovskites

This review gives a perspective on different synthetic methodologies for the preparation of halide perovskites and highlights the structural effects on their optoelectronic properties.

Synthetic Manipulation of Hybrid Perovskite Systems in Search of New and Enhanced Functionalities

Over the past few years the organic-inorganic hybrid perovskite systems have emerged as a promising class of materials for photovoltaic and electroluminescent thin-film device applications, in view of their unique set of tunable optoelectronic properties. Importantly, these materials can be easily solution-processed at low temperatures and as such are amenable to facile molecular engineering. Thus, a variety of low-dimensional forms and quantum structures of these materials can be obtained through strategic synthetic manipulations through small molecule incorporation or molecular ion doping. In this Minireview, we specifically focus on these approaches and outline the possibilities of utilizing these for enhanced functionalities and newer application domains.

Zero-Dimensional Methylammonium Bismuth Iodide-Based Lead-Free Perovskite Capacitor

Symmetrical electrochemical capacitors are attracting immense attention because of their fast charging-discharging ability, high energy density, and low cost of production. The current research in this area is mainly focused on exploring novel low-cost electrode materials with higher energy and power densities. In the present work, we fabricated an electrochemical double-layer capacitor using methylammonium bismuth iodide (CH₃NH₃)₃Bi₂I₉, a lead-free, zero-dimensional hybrid perovskite material. A maximum areal capacitance of 5.5 mF/cm² was obtained, and the device retained 84.8% of its initial maximum capacitance even after 10 000 charge-discharge cycles. Impedance spectroscopy measurements revealed that the active layer provides a high surface area for the electrolyte to access. As a result, the charge transport resistance is reasonably low, which is advantageous for delivering excellent performance.

Visual and sensitive fluorescent sensing for ultratrace mercury ions by perovskite quantum dots

Mercury ions sensing is an important issue for human health and environmental safety. A novel fluorescence nanosensor was designed for rapid visual detection of ultratrace mercury ions (Hg²⁺) by using CH₃NH₃PbBr₃ perovskite quantum dots (QDs) based on the surface ion-exchange mechanism. The synthesized CH₃NH₃PbBr₃ QDs can emitt intense green fluorescence with high quantum yield of 50.28%, and can be applied for Hg²⁺ sensing with the detection limit of 0.124 nM (24.87 ppt) in the range of 0 nM-100 nM. Furthermore, the interfering metal ions have no any influence on the fluorescence intensity of QDs, showing the perovskite QDs possess the high selectivity and sensitivity for Hg²⁺ detection. The sensing mechanism of perovskite QDs for Hg²⁺ is has also been investigated by XPS, EDX studies, showing Pb²⁺ on the surface of perovskite QDs has been partially replaced by Hg²⁺. Spot plate test shows that the perovskite QDs can also be used for visual detection of Hg²⁺. Our research indicated the perovskite QDs are promising candidates for the visual fluorescence detection of environmental micropollutants.

Thermoresponsive Emission Switching via Lower Critical Solution Temperature Behavior of Organic-Inorganic Perovskite Nanoparticles

Lead halide perovskites have shown much promise for high-performing solar cells due to their inherent electronic nature, and though the color of bright-light emitters based on perovskite nanoparticles can be tuned by halide mixing and/or size control, dynamic switching using external stimuli remains a challenge. This article reports an unprecedented lower critical solution temperature (LCST) for toluene solutions containing methylammonium lead bromide (MAPbBr₃ ), oleic acid, alkylamines, and dimethylformamide. The delicate interplay of these molecules and ions allows for the reversible formation and decomposition of MAPbBr₃ nanoparticles upon heating and cooling, which is accompanied by green and blue photoemissions at each state. An intermediate 1D crystal with PbBr₂ -amine coordination is found to play pivotal role in this, and a mechanistic insight is provided based on a three-state model. In addition to a high quantum yield (up to 85%), this system allows for control over the cloud point (30-80 °C) through compositional engineering and the luminescent color (blue to red) via halogen exchange, thus making it a versatile solution for developing functional molecular organic-inorganic LCST quantum dots.

Exploration of organic–inorganic hybrid perovskites for surface-enhanced infrared spectroscopy of small molecules

Organic–inorganic hybrid perovskites allow the infrared absorption of small molecules to be efficiently enhanced.

A novel dimethylformamide (DMF) free bar-cast method to deposit organolead perovskite thin films with improved stability

We report a solvent-free approach to synthesizing organolead perovskites by using solid state reactions to coat perovskite crystals onto Al₂O₃or TiO₂nanoparticles followed by addition of terpineol affording perovskite inks.

Synergism at the Nanoscale

Photoactive nanoparticles are smart systems that exhibit unique optical properties. In general, their intrinsic properties are size dependent. The degree and type of response to size are both related to their composition. Nanoparticles usually require to be capped with organic ligands in order to be dispersible in an aqueous or organic media, thus leading to nanoparticle colloidal dispersions and enhancing the processability of the material. The organic ligand also plays a key role in their preparation. In addition, the high surface-to-volume ratio of the nanoparticles combined with the affinity of the ligands for the nanoparticle surface can be used to place a large number of functional molecules at their periphery. The purpose of this chapter is to understand the synergism between nanoparticles and organic ligands with regard to their preparation, performance, and applicability.

Material Innovation in Advancing Organometal Halide Perovskite Functionality

Organometal halide perovskites (OMHPs) have garnered much attention recently for their unprecedented rate of increasing power conversion efficiency (PCE), positioning them as a promising basis for the next-generation photovoltaic devices. However, the gap between the rapid increasing PCE and the incomplete understanding of the structure-property-performance relationship prevents the realization of the true potential of OMHPs. This Perspective aims to provide a concise overview of the current status of OMHP research, highlighting the unique properties of OMHPs that are critical for solar applications but still not adequately explained. Stability and performance challenges of OMHP solar cells are discussed, calling upon combined experimental and theoretical efforts to address these challenges for pioneering commercialization of OMHP solar cells. Various material innovation strategies for improving the performance and stability of OMHPs are surveyed, showing that the OMHP architecture can serve as a promising and robust platform for the design and optimization of materials with desired functionalities.

Control of Emission Color of High Quantum Yield CH3NH3PbBr3 Perovskite Quantum Dots by Precipitation Temperature

Emission color controlled, high quantum yield CH3NH3PbBr3 perovskite quantum dots are obtained by changing the temperature of a bad solvent during synthesis. The products for temperatures between 0 and 60 °C have good spectral purity with narrow emission line widths of 28-36 nm, high absolute emission quantum yields of 74% to 93%, and short radiative lifetimes of 13-27 ns.