Fe3O4@SiO2@SBA-3@CPTMS@Arg-Cu: preparation, characterization, and catalytic performance in the conversion of nitriles to amides and the synthesis of 5-substituted 1H-tetrazoles

A novel, efficient, and recyclable mesoporous Fe3O4@SiO2@SBA-3@CPTMS@Arg-Cu nanocatalyst was synthesized by grafting l-arginine (with the ability to coordinate with Cu) onto a mixed phase of a magnetic mesoporous SBA-3 support. The catalyst was characterized using several techniques, including Fourier-transform infrared (FT-IR) spectroscopy, thermogravimetric analysis (TGA), vibrating sample magnetometry (VSM), X-ray diffraction (XRD) analysis, N2 adsorption-desorption analysis, scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), energy dispersive X-ray (EDX) analysis, and atomic absorption spectroscopy (AAS). The resulting solid material possessed a surface area of 145 m2 g-1 and a total pore volume of 34 cm3 g-1. The prepared mesoporous material was studied as a practical, recyclable, and chemoselective catalyst in some organic functional group transformations such as the conversion of nitriles to amides and synthesis of 5-substituted 1H-tetrazoles. This novel magnetic nanocatalyst proved to be effective and provided the products in high to excellent yields under green solvent conditions. Meanwhile, the as-prepared Fe3O4@SiO2@SBA-3@CPTMS@Arg-Cu demonstrated excellent reusability and stability under reaction conditions, and its catalytic activity shown only a slight decrease after seven consecutive runs. Therefore, the as-synthesized magnetic Fe3O4@SiO2@SBA-3@CPTMS@Arg-Cu has broad prospects for practical applications, and offers various benefits such as simplicity, nontoxicity, low cost, simple work-up, and an environmentally benign nature.

Constructing a metal-free 2D covalent organic framework for visible-light-driven photocatalytic reduction of CO2: a sustainable strategy for atmospheric CO2 utilization

A 2D polyimide-linked covalent organic framework (COF) with band gap energy of 2.2 eV is developed as a stable and efficient porous photocatalyst which shows CO2 reduction to formic acid, formaldehyde and methanol.

A possible theranostic approach of chitosan-coated iron oxide nanoparticles against human colorectal carcinoma (HCT-116) cell line

Iron oxides have become increasingly popular for their use as a diagnostic and therapeutic tool in oncology. This study aimed to improve pharmacological valuable of Fe₃O₄, which may be use to diagnosis colorectal cancers (CRC). Here, we have developed chitosan (CS) coated Fe₃O₄ through a cost-effective procedure. First, we determined the characterization of OA-C-Fe₃O₄ by FTIR, UV–Vis spectra, and TEM. Then, we evaluated the photodynamic therapeutic (PDT) activity of OA-C-Fe₃O₄ in human colorectal carcinoma cell lines (HCT 116). Current results revealed that the light-induced enhanced reactive oxygen species (ROS) activity of the nanoparticles (NPs) and caused cell death via the activity of caspase 9/3. The in vitro magnetic resonance imaging (MRI) experiments in (HCT 116) and human embryonic kidney cells (HEK 293) illustrated that nanohybrid is an effective MRI contrasting agents for the diagnosis of colorectal cancer.

Diorganyl diselenides: a powerful tool for the construction of selenium containing scaffolds

Organoselenium compounds find versatile applications in organic synthesis, materials synthesis, and ligand chemistry. Organoselenium heterocycles are widely studied agents with diverse applications in various biological processes. This review highlights the recent progress in the synthesis of selenium heterocycles using diorganyl diselenides with keen attention on green synthetic approaches, scopes, C-H selanylation, the mechanisms of different reactions and insights into the formation of metal complexes. The C-H selanylation using diorganyl diselenides with different catalysts, bases, transition metals, iodine salts, NIS, hypervalent iodine, and other reagents is summarised. Finally, the diverse binding modes of bis(2/4-pyridyl)diselenide with different metal complexes are also summarised.

Recent Developments and Perspectives in the C-Se Cross Coupling Reactions

:

The C-Se bond forming reactions are attractive synthetic strategies for biochemists and synthetic chemists alike for the synthesis of various molecules that are of biological, pharmaceutical and material interest. Therefore, the design and synthesis of organoselenium compounds currently constitute engaging fundamental problems in applied chemistry both in pharmaceutical and academic laboratories. This review discusses the recent works reported in carbon–selenium cross-coupling reactions with the emphasis on the mechanistic aspects of the reactions. The reacting species, the addition of ligands, selection of catalysts, use of suitable solvents, proper setting of reaction time, are well discussed to understand the detailed mechanism. Various simple, economical and environmentally friendly protocols are demonstrated, which ensured product stability, low toxicity, environmentally benign and excellent reactivity for the synthesis of organoselenium compounds. This review covers the scientific literature from 2010 to 2019.

Nanocatalysts for C–Se cross-coupling reactions

This mini review is an attempt to highlight the most important contributions toward the applications of nanocatalysts in carbon–selenium cross-coupling reactions with the emphasis on the mechanistic aspects of the reactions.

Metal-organic and covalent organic frameworks as single-site catalysts

Heterogeneous single-site catalysts consist of isolated, well-defined, active sites that are spatially separated in a given solid and, ideally, structurally identical. In this review, the potential of metal-organic frameworks (MOFs) and covalent organic frameworks (COFs) as platforms for the development of heterogeneous single-site catalysts is reviewed thoroughly. In the first part of this article, synthetic strategies and progress in the implementation of such sites in these two classes of materials are discussed. Because these solids are excellent playgrounds to allow a better understanding of catalytic functions, we highlight the most important recent advances in the modelling and spectroscopic characterization of single-site catalysts based on these materials. Finally, we discuss the potential of MOFs as materials in which several single-site catalytic functions can be combined within one framework along with their potential as powerful enzyme-mimicking materials. The review is wrapped up with our personal vision on future research directions.

A new recyclable functionalized mesoporous SBA-15 catalyst grafted with chiral Fe(iii) sites for the enantioselective aminolysis of racemic epoxides under solvent free conditions

A mesoporous SBA-15 supported chiral Fe(iii)-catalyst was prepared and used for the synthesis of chiral β-amino alcohols with very good yields and enantioselectivities (ee upto 98%) under neat conditions at RT.

Copper(ii) incorporated functionalized polystyrene catalyzed N-arylation of amides under solvent free condition with broad substrate scope

A new polymer supported Cu(ii) catalyst has been reported for N-arylation of various amides with aryl halides under neat reaction conditions.

A new chiral Fe(iii)–salen grafted mesoporous catalyst for enantioselective asymmetric ring opening of racemic epoxides at room temperature under solvent-free conditions

A new heterogeneous chiral Fe(iii)–salen grafted mesoporous catalyst has been synthesized for the enantioselective (ee > 99%) ARO reaction of racemic epoxides with aromatic amine under solvent-free conditions.

CO2 fixation at atmospheric pressure: porous ZnSnO3 nanocrystals as a highly efficient catalyst for the synthesis of cyclic carbonates

Self-assembled, ultra small, porous zinc stannate nanocrystals have been synthesized, which catalyzes the formation of cyclic carbonates from various epoxide and CO₂ under very mild reaction conditions.

Halogen and solvent effects on the conformational, vibrational and electronic properties of 1,4-diformylpiperazine: A combined experimental and DFT study

The molecular structure and properties of 1,4-diformylpiperazine (1,4-dfp, C6H[Formula: see text]N2O2) were investigated by Fourier transform infrared (FT-IR) spectroscopy, Raman spectroscopy and density functional theory (DFT). The Becke-3-Lee–Yang–Parr (B3LYP) functional was used with the 6-31[Formula: see text]G(d,p) basis set. Total energy distribution (TED) analysis of normal modes was performed to identify characteristic frequencies by the scaled quantum mechanical (SQM) method. Halogeno-analogs of 1,4-dfp were studied to understand the halogen effect. Computations were focused on five conformational isomers of the compounds in the gas phase and in solutions. The computed and experimental frequencies of the C[Formula: see text]O stretching vibration of 1,4-dfp were correlated with the empirical solvent parameters such as the Kirkwood–Bauer–Magat (KBM) equation, the solvent acceptor number (AN), Swain parameters and linear solvation energy relationships (LSER). The electronic properties of the compounds were also examined. The findings from the present work may be useful to understand systems involving the halogens and conformational changes analogous to the compounds investigated.

A polymer supported ascorbate functionalized task specific ionic liquid: an efficient reusable catalyst for 1,3-dipolar cycloaddition

In situ coalescence of copper on polymer supported ascorbate functionalized task specific ionic liquid, acts as an efficient catalyst for Huisgen 1,3 dipolar cycloaddition.

Nitrogen enriched mesoporous organic polymer anchored copper(ii) material: an efficient and reusable catalyst for the synthesis of esters and amides from aromatic systems

New mesoporous polymer anchored copper acetate (Cu-mPMF) has been synthesized and well characterized. The catalytic performance of this complex has been tested for the synthesis of esters and amides.