Advances in the heterostructures for enhanced hydrogen production efficiency: a comprehensive review

The growing global energy demand and heightened environmental consciousness have contributed to the increasing interest in green energy sources, including hydrogen production. However, the efficacy of this technology is contingent upon the efficient separation of charges, high absorption of sunlight, rapid charge transfer rate, abundant active sites and resistance to photodegradation. The utilization of photocatalytic heterostructures coupling two materials has proved to be effective in tackling the aforementioned challenges and delivering exceptional performance in the production of hydrogen. The present article provides a comprehensive overview of operational principles of photocatalysis and the combination of photocatalytic and piezo-catalytic applications with heterostructures, including the transfer behavior and mechanisms of photoexcited non-equilibrium carriers between the materials. Furthermore, the effects of recent advances and state-of-the-art designs of heterostructures on hydrogen production are discussed, offering practical approaches to form heterostructures for efficient hydrogen production.

3D-ZnO Superstructure Decorated with Carbon-Based Material for Efficient Photoelectrochemical Water-Splitting under Visible-Light Irradiation

The depletion of fossil fuels is a worldwide problem that has led to the discovery of alternative energy sources. Solar energy is the focus of numerous studies due to its huge potential power and environmentally friendly nature. Furthermore, one such area of study is the production of hydrogen energy by engaging photocatalysts using the photoelectrochemical (PEC) method. 3-D ZnO superstructures are extensively explored, showing high solar light-harvesting efficiency, more reaction sites, great electron transportation, and low electron-hole recombination. However, further development requires the consideration of several aspects, including the morphological effects of 3D-ZnO on water-splitting performance. This study reviewed various 3D-ZnO superstructures fabricated through different synthesis methods and crystal growth modifiers, as well as their advantages and limitations. Additionally, a recent modification by carbon-based material for enhanced water-splitting efficiency has been discussed. Finally, the review provides some challenging issues and future perspectives on the improvement of vectorial charge carrier migration and separation between ZnO as well as carbon-based material, using rare earth metals, which appears to be exciting for water-splitting.

Theoretical and experimental studies on photocatalytic removal of methylene blue (MetB) from aqueous solution using oyster shell synthesized CaO nanoparticles (CaONP-O)

The development of technologies for the removal of dye from aqueous solution is most desirable if the end product is relatively green (i.e., environmentally friendly). Photodegradation (as one of such technology) and photolysis (without the catalyst) was applied to investigate the role of sol-gel synthesized calcium oxide nanoparticle (using the oyster shell as the precursor). The results obtained gave substantial evidence that calcium oxide nanoparticles catalyzed the degradation of the methylene blue dye up to a maximum percentage of 98 % removal. Degradation efficiency displayed a strong dependency on time, initial dye concentration, catalyst load, pH, and ionic strength. Chi-square and sum of square error analysis indicated that the photodegradation kinetics fitted the Langmuir-Hinshelwood, first order, and pseudo first-order models best. The half-life of the dye was significantly reduced from hours to minutes due to photocatalysis. Quantum chemical calculations indicated that the degradation proceeded through adsorption, deformation/degradation, and desorption through the chloride end of the molecule linked to the calcium active center of the catalyst. Results from Fukui functions and molecular descriptors analysis confirmed the mechanism of photocatalysis.

Protective Effects of Carbon Dots Derived from Phellodendri Chinensis Cortex Carbonisata against Deinagkistrodon acutus Venom-Induced Acute Kidney Injury

BACKGROUND

As an emerging nanomaterial, carbon dots (CDs) have been the focus of tremendous attention for biomedical applications. However, little information is available on their bioactivity of inhibiting acute kidney injury (AKI) induced by snake venom.

METHODS

This study reports the development of a green, one-step pyrolysis process to synthesize CDs using Phellodendri Chinensis Cortex (PCC) as the sole precursor, and their potential application as a protectant against Deinagkistrodon acutus (D. acutus) venom-induced AKI was investigated for the first time. The AKI model was established by injecting D. acutus venom into the abdominal cavity of mice and the potential protective effects of PCC Carbonisata-CDs (PCCC-CDs) on renal abnormalities including dysfunction, inflammatory reactions, tissue damage, and thrombocytopenia at six time points (1, 3, and 12 h, and 1, 2, and 5 days) were investigated.

RESULTS

These results demonstrated that PCCC-CDs significantly inhibited the kidney dysfunction (reduced serum creatinine (SCR), blood urea nitrogen (BUN), urinary total protein (UTP), and microalbuminuria (MALB) concentrations) and the production of chemoattractant (monocyte chemotactic protein 1 (MCP-1)), proinflammatory cytokines (interleukin (IL)-1β), and anti-inflammatory cytokine (IL-10) in response to intraperitoneal injection of D. acutus venom. The beneficial effect of PCCC-CDs on the envenomed mice was similar to that on the change in renal histology and thrombocytopenia.

CONCLUSIONS

These results demonstrated the remarkable protective effects of PCCC-CDs against AKI induced by D. acutus venom, which would not only broaden the biomedical applications of CDs but also provide a potential target for the development of new therapeutic drugs for AKI induced by D. acutus snakebite envenomation.

Ferroelectric Materials: A Novel Pathway for Efficient Solar Water Splitting

Over the past few decades, solar water splitting has evolved into one of the most promising techniques for harvesting hydrogen using solar energy. Despite the high potential of this process for hydrogen production, many research groups have encountered significant challenges in the quest to achieve a high solar-to-hydrogen conversion efficiency. Recently, ferroelectric materials have attracted much attention as promising candidate materials for water splitting. These materials are among the best candidates for achieving water oxidation using solar energy. Moreover, their characteristics are changeable by atom substitute doping or the fabrication of a new complex structure. In this review, we describe solar water splitting technology via the solar-to-hydrogen conversion process. We will examine the challenges associated with this technology whereby ferroelectric materials are exploited to achieve a high solar-to-hydrogen conversion efficiency.

3D Hierarchical heterostructures of Bi2W1−xMoxO6 with enhanced oxygen evolution reaction from water under natural sunlight

Self-assembled 3D hierarchical Bi₂W_1−xMo_xO₆ heterostructures with varying x (x = 0, 0.2, 0.4, 0.6, 0.8 or 1.0) with different morphologies were synthesised via a facile one-pot solvothermal method and their photocatalytic activity towards the oxygen evolution reaction (OER) from water under natural sunlight was tested.

Self-Driven Photoelectrochemical Splitting of H2S for S and H2 Recovery and Simultaneous Electricity Generation

A novel, facile self-driven photoelectrocatalytic (PEC) system was established for highly selective and efficient recovery of H₂S and simultaneous electricity production. The key ideas were the self-bias function between a WO₃ photoanode and a Si/PVC photocathode due to their mismatched Fermi levels and the special cyclic redox reaction mechanism of I^-/I₃^-. Under solar light, the system facilitated the separation of holes in the photoanode and electrons in the photocathode, which then generated electricity. Cyclic redox reactions were produced in the photoanode region as follows: I^- was transformed into I₃^- by photoholes or hydroxyl radicals, H₂S was oxidized to S by I₃^-, and I₃^- was then reduced to I^-. Meanwhile, H⁺ was efficiently converted to H₂ in the photocathode region. In the system, H₂S was uniquely oxidized to sulfur but not to polysulfide (S_x^n-) because of the mild oxidation capacity of I₃^-. High recovery rates for S and H₂ were obtained up to ∼1.04 mg h^-1 cm^-1 and ∼0.75 mL h^-1 cm^-1, respectively, suggesting that H₂S was completely converted into H₂ and S. In addition, the output power density of the system reached ∼0.11 mW cm^-2. The proposed PEC-H₂S system provides a self-sustaining, energy-saving method for simultaneous H₂S treatment and energy recovery.

Metal-based quantum dots: synthesis, surface modification, transport and fate in aquatic environments and toxicity to microorganisms

The intense interest in metal-based QDs is diluted by the fact that they cause risks to aquatic environments.

Cobalt salophen functionalized SBA-15 as an active catalyst for photocatalytic water oxidation

A new cobalt salophen functionalized SBA-15 is the cost-effective photocatalyst for water oxidation under mild conditions.

Modification of a thin layer of α-Fe2O3 onto a largely voided TiO2 nanorod array as a photoanode to significantly improve the photoelectrochemical performance toward water oxidation

A largely voided TiO₂ nanorod array was modified with Fe₂O₃ thin layers to deliver ∼3.3 times higher the applied bias photon-to-current efficiency than that of a plain TiO₂ nanorod array.