Recent trends in magnetic spinel ferrites and their composites as heterogeneous Fenton-like catalysts: A review

In recent years, there has been a growing interest in utilizing spinel ferrite and their nanocomposites as Fenton-like catalysts. The use of these materials offers numerous advantages, including ability to efficiently degrade pollutants and potential for long-term and repeated use facilitated by their magnetic properties that make them easily recoverable. The remarkable catalytic properties, stability, and reusability of these materials make them highly attractive for researchers. This paper encompasses a comprehensive review of various aspects related to the Fenton process and the utilization of spinel ferrite and their composites in catalytic applications. Firstly, it provides an overview of the background, principles, mechanisms, and key parameters governing the Fenton reaction, along with the role of physical field assistance in enhancing the process. Secondly, it delves into the advantages and mechanisms of H2O2 activation induced by different spinel ferrite and their composites for the removal of organic pollutants, shedding light on their efficacy in environmental remediation. Thirdly, the paper explores the application of these materials in various Fenton-like processes, including Fenon-like, photo-Fenton-like, sono-Fenton-like, and electro-Fenton-like, for the effective removal of different types of contaminants. Furthermore, it addresses important considerations such as the toxicity, recovery, and reuse of these materials. Finally, the paper presents the challenges associated with H2O2 activation by these materials, along with proposed directions for future improvements.

Supported Pt-Cu bimetallic catalysts: preparation and synergic effects in their catalytic oxidative degradation of aniline

Catalytic Fenton oxidation is an effective way to remove organic pollutants in water, and the performance of the catalyst is a key issue for the competiveness of this method. In this work, various supported bimetallic Pt–Cu catalysts were prepared by different impregnation methods and their performances for catalytic Fenton oxidation of aniline in water were investigated. In the different impregnation methods employed, factors including the reduction method of the metal precursor, type of catalytic support, and loading of metal were investigated. The effect of different reduction methods on actual loadings of the active components on the supported Pt–Cu catalysts showed the order of (i) H₂ reduction > (ii) liquid phase methanal reduction. Meanwhile, compared with the monometallic catalysts, the Pt–Cu alloy phase (mainly in the form of PtCu₃) was generated and the specific surface area was significantly reduced for the bimetallic catalysts. In the process of Fenton catalytic oxidation of aniline, it was found that most of the prepared catalysts had a certain catalytic activity for H₂O₂ accompanied with aniline degradation. It was found that Pt_0.5Cu_1.5/AC (where AC denotes activated carbon) exhibited superb catalytic activity compared with all other prepared catalysts. In particular, aniline was almost completely mineralized in a neutral solution (500 mg L⁻¹ aniline, 0.098 mol L⁻¹ H₂O₂) after 60 min at 50 °C using Pt–Cu/AC (Pt: 0.5%, Cu: 1.5%). The characterization results showed that the Pt and Cu components were rather evenly distributed on the AC support for this catalyst. More importantly, there was an obvious synergic effect on the supported bimetallic catalyst between the Pt and Cu components for the catalytic oxidation of aniline.

An AC supported Pt–Cu catalyst prepared with a new methanal reduction method was found to be quite effective for catalytic Fenton oxidation of aniline in water. The Pt and Cu components showed a synergic effect for the catalytic process.

Fe-based Fenton-like catalysts for water treatment: Preparation, characterization and modification

Fenton reaction based on hydroxyl radicals () is effective for environment remediation. Nevertheless, the conventional Fenton reaction has several disadvantages, such as working at acidic pH, producing iron-containing sludge, and the difficulty in catalysts reuse. Fenton-like reaction using solid catalysts rather than Fe²⁺ has received increasing attention. To date, Fe-based catalysts have received increasing attention due to their earth abundance, good biocompatibility, comparatively low toxicity and ready availability, it is necessary to review the current status of Fenton-like catalysts. In this review, the recent advances in Fe-based Fenton-like catalysts were systematically analyzed and summarized. Firstly, the various preparation methods were introduced, including template-free methods (precipitation, sol gel, impregnation, hydrothermal, thermal, and others) and template-based methods (hard-templating method and soft-templating method); then, the characterization techniques for Fe-based catalysts were summarized, such as X-ray diffraction (XRD), Brunauer, Emmett and Teller (BET), SEM (scanning electron microscopy)/TEM (transmission electron microscopy)/HRTEM (high-resolution TEM), FTIR (Fourier transform infrared spectroscopy)/Raman, XPS (X-ray photoelectron spectroscopy), ⁵⁷Fe Mössbauer spectroscopy etc.; thirdly, some important conventional Fe-based catalysts were introduced, including iron oxides and oxyhydroxides, zero-valent iron (ZVI) and iron disulfide and oxychloride; fourthly, the modification strategies of Fe-based catalysts were discussed, such as microstructure controlling, introduction of support materials, construction of core-shell structure and incorporation of new metal-containing component; Finally, concluding remarks were given and the future perspectives for further study were discussed. This review will provide important information to further advance the development and application of Fe-based catalysts for water treatment.

Carboxylcellulose hydrogel confined-Fe3O4 nanoparticles catalyst for Fenton-like degradation of Rhodamine B

Facile preparation of functional hydrogel materials for environmental catalysis is a hot research topic of soft materials science and green catalysis. In this study, a carboxylcellulose hydrogel confined Fe₃O₄ nanoparticles composite catalyst (Fe₃O₄@CHC) with magnetic recyclability has been synthesized by taking the advantages of the newly developed cellulose solution in tetramethyl guanidine/DMSO/CO₂ through in situ acylation using mixed cyclic anhydrides and ion exchange reaction. The achieved Fe₃O₄@CHC hydrogel catalyst was shown to be an more efficient and better Fenton-like catalyst for decomposition of the organic dye rhodamine B (RhB) in the presence of hydrogen peroxide, with almost complete decomposition occurring within 180 min, in comparison with Fe₃O₄@cellulose hydrogel (CH) with excellent recyclability. This work provided a facile strategy for the preparation of hydrogel-based functional composite green catalytic materials, which has potential applications in green catalysis.

Stable Fe3O4 submicrospheres with SiO2 coating for heterogeneous Fenton-like reaction at alkaline condition

In the traditional Fenton process, the efficient generation of hydroxyl radical (HO) strongly relies on an acidic circumstance and the iron ions would precipitate and form large amounts of hazardous iron-containing sludge at alkaline pH. To realize stable heterogeneous Fenton-like catalytic degradation at alkaline condition, Fe₃O₄ submicrospheres with SiO₂ coating were successfully synthesized by using water glass as the silica sources via a facile ultrasound assisted method. The as-obtained Fe₃O₄@SiO₂ spheres were further used as catalysts for the Fenton-like degradation of tetracycline hydrochloride (TC). The Fe₃O₄@SiO₂ submicrospheres exhibited superior catalytic activity in higher pH environment (pH value = 11), and the degradation efficiency toward TC was ca. 80% after ten successive runs. The kinetics for the catalytic degradation of TC were agreed well with the second-order kinetic model. The reaction rate constant (k) over the Fe₃O₄@SiO₂ submicrospheres at a pH value of 11 was 7.69 times greater than that at a pH value of 3. Reactive species scavenging experiments revealed that HO and superoxide radical (O₂^- / HO₂^-) played a dominant role during the Fenton-like degradation of TC at pH 3 and pH 11, respectively. Possible Fenton-like degradation pathways of TC were proposed through the identification of intermediates using the high performance liquid chromatography coupled with mass spectrometry (HPLC-MS), which involved cleavage of methyl groups, N-dimethyl group, and hydroxy groups, ring-opening reaction, etc. The degradation efficiency of TC was close to 91.5% and total organic carbon (TOC) in solution was eliminated by about 41.4% at the optimized conditions. In a word, with the unique acidic surface properties and abundant Si-OH bonds, the Fe₃O₄@SiO₂ submicrospheres exhibited well dispersion, good catalytic activity, strong alkali resistance and excellent recyclability in an ultrasonic-Fenton-like system.

Photocatalytic degradation of model pharmaceutical pollutant by novel magnetic TiO2@ZnFe2O4/Pd nanocomposite with enhanced photocatalytic activity and stability under solar light irradiation

In the last decades, the use of magnetic nanocomposites as a catalyst was considered for removal of organic pollutants due to its easy separation. Therefore, initially, TiO₂@ZnFe₂O₄/Pd nanocomposite was prepared and then used in the photodegradation of diclofenac under direct solar irradiation in the batch and continuous systems. The structure, morphology and other specifications of produced nanocatalyst were determined via XRD, VSM, FESEM/EDX, FTIR, GTA, UV-Vis, Zeta potential, XPS and ICP-OES. The effective factors on diclofenac removal via nanophotocatalyst viz. pH, catalyst concentration, initial concentration of diclofenac, and flow rate and column length on diclofenac photodegradation were studied. Based on the results, the optimal rate for pH, catalyst concentration, and initial concentration of diclofenac was 4, 0.03 g/l and 10 mg/l respectively. Pd-coated TiO₂@ZnFe₂O₄ magnetic photocatalyst had higher photocatalytic activity in diclofenac photodegradation in relation to ZnFe₂O₄ and TiO₂@ZnFe₂O₄ under solar light irradiation. The findings showed that after five recycles, the photocatalytic efficiency did not show much reduction i.e. the removal efficiency from 86.1% in the first cycle reduced only to 71.38% in the last cycle. Likewise, in this study, with flow rate reduction and column length increase diclofenac degradation rate increased.

Integration of homogeneous and heterogeneous advanced oxidation processes: Confined iron dancing with cyclodextrin polymer

A novel catalyst which integrates heterogeneous and homogenous Fenton reactions is designed and fabricated by encapsulating 2,5-dihydroxy-1,4-benzoquinone (2,5-DBQ) in ECDP-Fe₃O₄, a composite of Fe₃O₄ nanoparticles immobilized on a β-cyclodextrin polymer (ECDP) with ethylene diamine tetraacetic acid (EDTA) as cross-linking agent. The 2,5-DBQ@ECDP-Fe₃O₄ has superior catalytic performance for 4-nitrophenol and 2,4-dichlorophenol degradation compared with control systems. Mechanism study revealed that although the initial active site is Fe₃O₄ loaded on ECDP, the actually catalyst is the iron ions released from Fe₃O₄ but confined within the composite. EDTA in β-cyclodextrin polymer can improve both the solubility and adsorption capacity to H₂O₂ of Fe₃O₄. The quinone molecules 2,5-DBQ in the β-cyclodextrin cavity can accelerate Fe³⁺/Fe²⁺ cycle adjacent to the cavity, thus in favor of the decomposition of H₂O₂ into OH as main reactive oxidizing species. The current catalyst integrates the advantages of homogeneous and heterogeneous advanced oxidation processes and is promising in practical applications.

Fe3O4@S-doped ZnO: A magnetic, recoverable, and reusable Fenton-like catalyst for efficient degradation of ofloxacin under alkaline conditions

In this study, an efficient and reusable heterogeneous Fenton catalyst Fe₃O₄@S-doped ZnO magnetic composite was synthesized for the degradation of ofloxacin (OFX) under alkaline conditions without external energy input. The Fe₃O₄@S-doped ZnO exhibited excellent catalytic activity toward ofloxacin degradation within 120 min. Using 0.25 g/L of catalyst and 5.0 mL/L of H₂O₂ under optimized conditions, the catalyst was effective in pH values ranging from 5.2 to 9.0. The catalytic performance at optimal conditions was in accordance with a pseudo-first-order kinetics model. The reaction constant of Fe₃O₄@S-doped ZnO (0.0354 min^-1) was three times than that of Fe₃O₄@ZnO (0.0124 min^-1) under alkaline conditions (pH 8.2). The reactive oxygen species were the ·OH and O₂^·-, with ·OH dominating in the degradation of OFX. It is proposed that the catalyst acts as a Lewis acid, creating an acidic microenvironment on the catalyst's surface and widening the pH range of the Fenton reaction to alkaline conditions. Additionally, the catalyst was stable and reusable after six cycles of use. The Fenton-like Fe₃O₄@S-doped ZnO catalyst overcomes the problem of the narrow pH of the reaction system, thus providing promising environmental applications.

Heterogeneous Fenton-like degradation of EDTA in an aqueous solution with enhanced COD removal under neutral pH

By providing the key carbon and nitrogen elements needed for eutrophication, the potential toxicity of ethylenediaminetetraacetic acid (EDTA) prompts the exploration of effective treatment methods to minimize the amount of EDTA released into the environment. In this study, Fe₃O₄ magnetic nanoparticles (MNPs) were prepared and used as catalysts to study the mineralization of EDTA in Fenton-like reactions under neutral pH. Fe₃O₄ MNPs were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), and Brunauer-Emmett-Teller (BET). The effects of pH, ferric ion leaching, and H₂O₂ concentration on chemical oxygen demand (COD) removal of EDTA were investigated. The morphological characterization of the nanoparticles suggests a quasi-spherical structure with small particle size and a surface area of 49.9 m²/g. The results show that Fe₃O₄ MNPs had good catalytic activity for the mineralization of EDTA under pH 5.0-9.0. The optimum conditions for the COD removal of 45% at pH 7.0 were: 40 mM H₂O₂, 10 mM Fe₃O₄, and 1 g/L EDTANa₂·2H₂O at 303 K. Fe₃O₄ MNPs maintained high catalytic activity after five cycles of continuous degradation of EDTA. According to reactive oxidizing species measurements obtained by electron spin resonance (ESR), it was confirmed that HO· free radicals, presented in the H₂O₂/Fe₃O₄ MNPs heterogeneous Fenton-like reaction, were the primary active group in the removal of EDTA. These features can be considered beneficial to the application of Fe₃O₄ MNPs towards industrial wastewater treatment.

Carbon doped Fe3O4 peroxidase-like nanozyme for mitigating the membrane fouling by NOM at neutral pH

Oxidation is a widely used method in drinking water treatment to mitigate the membrane fouling caused by the natural organic matters (NOM) from the surface water during ultra-filtration (UF) and nano-filtration (NF) processes, and H₂O₂ is one of the common oxidants for it. However, the oxidation capability of H₂O₂ at neutral pH is lower, compared to the acidic and alkaline conditions. In order to improve the efficiency of NOM oxidation at neutral pH, a carbon-doped Fe₃O₄ peroxidase-like nanozyme (CFPN) was synthesized in this study and used as a high-performance catalyst for H₂O₂ to generate hydroxyl radical. The oxygen-containing groups on the carbon structure of CFPN can form an acidic microenvironment, allowing H₂O₂ to produce hydroxyl radical by catalysis in neutral conditions. The results of hydrophilicity analysis, zeta potential, high-performance liquid size exclusion chromatography (HPSEC), Fourier transform infrared spectrum (FTIR) and flux indicated that the hydroxyl radical can oxidize the hydrophobic matters of humic acid (HA) into hydrophilic matters by Fenton reaction or electrophilic addition reaction, which can mitigate the fouling of NF membranes. The results of the same test for the bovine serum albumin (BSA) indicated that the hydroxyl radical can mitigate the fouling of UF membranes by degrading the tertiary and secondary structures of BSA and partly oxidizing the side chain groups. In addition, two types of surface water samples were used to verify the above mechanism, and the results indicated that the hydroxyl radical treatment at neutral pH is a new viable and effective strategy to significantly mitigate the NOM fouling of UF and NF membranes.

The practical utility of the synthesis FeNi3@SiO2@TiO2 magnetic nanoparticles as an efficient photocatalyst for the humic acid degradation

Humic acid (HA) compounds in drinking water and wastewater disinfection processes are viewed as precursors of highly toxic, carcinogenic, and mutagenic disinfection by-product chemicals. In recent times, these compounds have gained considerable attention of scientists for their successful removal from aqueous solutions to permissible limits. To achieve this aim, the present study investigated, for the first time, the photocatalytical performance of the synthesis FeNi₃@SiO₂@TiO₂ nanoparticles for the HA degradation under different environmental conditions. The photocatalytic reactions were performed using ultraviolet (UV) radiation, whose intensity was fixed at 2500 μW/cm² throughout the experimental study. The characterization study performed, using specific diagnostic techniques, revealed the presence of several good morphological, magnetic, and catalytic specifications of the synthesized nanoparticles. The use of the simplified form of the Langmuir-Hinshelwood equation sufficiently describes the experimental data of the HA kinetic degradation, as it shows a high coefficient of regression values. Furthermore, the complete HA degradation was reached under conditions of pH = 3; initial HA concentration = 10 mg/L; FeNi₃@SiO₂@TiO₂ nanoparticles dosage = 0.01 g/L; and reaction time >30 min. Thus, the results obtained from this research suggested that the catalyst of FeNi₃@SiO₂@TiO₂ nanoparticles was an attractive, novel, and effective agent, which could be used for the degradation of HA in the photocatalytic processes.

Titanium dioxide nanoparticles induce endothelial cell apoptosis via cell membrane oxidative damage and p38, PI3K/Akt, NF-κB signaling pathways modulation

BACKGROUND

Titanium dioxide nanoparticles (TiO₂ NPs) are widely used nanoparticles. Despite, several studies investigated the toxic effects of TiO₂ NPs on HUVECs, the results are contradictory and the possible underlying mechanisms remain unclear.

METHODS

In the present study, we conducted an in vitro study to re-evaluate the possible toxic effects of TiO₂ NPs on HUVECs including cell viability, lipids peroxidation, intracellular signaling pathways and nitric oxide syntheses enzymes.

RESULTS

Our results demonstrated that, TiO₂ NPs were internalized to HUVECs and induce intracellular reactive oxygen species production and cell membrane oxidative damage at the higher concentration. TiO₂ NPs induce IKKα/β and Akt phosphorylation and p38 dephosphorylation. After 24 h treatment, pro-inflammatory cytokines, adhesion molecules and chemokine upregulated significantly. TiO₂ NPs have no significant effects on eNOS enzymatic activation and iNOS gene expression. At cellular level, apoptosis is the main process that occur in response to TiO2 NPs treatment. HUVECs pretreatment with N-acetyl-l-cysteine (NAC) ameliorate the toxic effects of TiO₂ NPs that indicate the oxidative stress is essential in TiO₂ NPs -induced toxicity. Total antioxidant capacity show a trend to increase in response to TiO₂ NPs exposure.

CONCLUSIONS

Taken together, this study confirmed the effects of TiO₂ NPs on endothelial cells and proposed multiple underlying mechanisms including cell membrane oxidative damage and intracellular processes.

Application of pea-like yolk–shell structured Fe3O4@TiO2 nanosheets for photocatalytic and photo-Fenton oxidation of bisphenol-A

Uniform pea-like yolk–shell (PLYS) structured magnetic TiO₂(PLYS-Fe₃O₄@TiO₂) nanosheets have been prepared via a combined kinetics-controlled mechanical force-driven and hydrothermal etching assisted crystallization method and characterized.

Transition-Metal Ion-Doped Flower-Like Titania Nanospheres as Nonlight-Driven Catalysts for Organic Dye Degradation with Enhanced Performances

Titania has recently been identified as a new and effective nonlight-driven catalyst for degradation of organic pollutant with the use of H₂O₂ as an oxidant; however, either relatively low surface area or lack of diversity in chemical composition largely limits its catalytic performance. In this work, a series of transition-metal ion (Mn²⁺, Co²⁺, Ni²⁺, and Cu²⁺)-doped titania nanomaterials with regular flower-like morphology, good crystallinity (anatase), and large specific surface areas (71.4-124.4 m² g^-1) were facilely synthesized and utilized as catalysts for methylene blue (MB) degradation in the presence of H₂O₂ without light irradiation. It was revealed that the doping of transition-metal ions (especially Mn²⁺) into titania could significantly improve the catalytic efficiency. At 30 °C, 10 mL of MB with a concentration of 50 mg L^-1 could be completely degraded within 60-100 min for these doped samples, whereas the removal rate was only 35.1% within 100 min with the use of pure flower-like titania. Temperature-dependent kinetic studies indicated that the presence of transition-metal ion dopants could markedly lower the activation energy and thus resulted in enhanced catalytic performances. Test of reusability exhibited that these doped catalysts could well keep their original catalytic activities after reuse for several cycles, indicating their excellent catalytic durability.

Enhanced heterogeneous Fenton-like degradation of methylene blue by reduced CuFe2O4

To facilitate rapid dye removal in oxidation processes, copper ferrite (CuFe₂O₄) was isothermally reduced in a H₂ flow and used as a magnetically separable catalyst for activation of hydrogen peroxide (H₂O₂). The physicochemical properties of the reduced CuFe₂O₄ were characterized with several techniques, including transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy and magnetometry. In the catalytic experiments, reduced CuFe₂O₄ showed superior catalytic activity compared to raw CuFe₂O₄ for the removal of methylene blue (MB) due to its relatively high surface area and loading Fe⁰/Cu⁰ bimetallic particles. A limited amount of metal ions leached from the reduced CuFe₂O₄ and these leached ions could act as homogeneous Fenton catalysts in MB degradation. The effects of experimental parameters such as pH, catalyst dosage and H₂O₂ concentration were investigated. Free radical inhibition experiments and electron spin resonance (ESR) spectroscopy revealed that the main reactive species was hydroxyl radical (˙OH). Moreover, reduced CuFe₂O₄ could be easily separated by using an external magnet after the reaction and remained good activity after being recycled five times, demonstrating its promising long-term application in the treatment of dye wastewater.

CuFe₂O₄ was reduced for activation of hydrogen peroxide and the reduced CuFe₂O₄ showed a relatively higher catalytic activity.

Cosmetic wastewater treatment by the ZVI/H2O2 process

The ZVI/H₂O₂ process was applied for cosmetic wastewater treatment. Two commercial zero-valent iron (ZVI) types with different granulations were chosen: Hepure Ferrox PRB and Hepure Ferrox Target. In addition, the pH and stirring method influence on ZVI/H₂O₂ process efficiency was studied. During the ZVI and ZVI/H₂O₂ processes, linear Fe ions concentration increase was observed. The addition of H₂O₂ significantly accelerated the iron dissolution process. The highest COD removal was obtained using finer ZVI (Hepure Ferrox Target) for doses of reagents ZVI/H₂O₂ 1500/1600 mg/L, in a H₂O₂/COD weight ratio 2:1, at pH 3.0 with stirring on a magnetic stirrer. After 120 min of the process, 84.0% COD removal (from 796 to 127 mg/L) was achieved. It was found that the efficiency of the process depends, as in the case of the Fenton process, on the ratio of the reagents (ZVI/H₂O₂) and their dose in relation to the COD (H₂O₂/COD) but does not depend on the dose of the iron itself. Statistical analysis confirms that COD removal efficiency depends primarily on H₂O₂/COD ratio and ZVI granulation, but ZVI dose influence is not statistically significant. The head space, solid-phase microextraction, gas chromatography, mass spectrometry results confirm high efficiency of the ZVI/H₂O₂ process.

Synthesis of Yolk-Shell Structured Fe3O4@void@CdS Nanoparticles: A General and Effective Structure Design for Photo-Fenton Reaction

Yolk-shell (Y-S) structured Fe3O4@void@CdS nanoparticles (NPs) are synthesized through a one-pot coating-etching process with Fe3O4@SiO2 as the core, where the coating of an outer CdS shell from a chemical bath deposition (CBD) process is simultaneously accompanied by the gradual etching of an inner SiO2 shell. The as-prepared Fe3O4@void@CdS NPs (ca. 200 nm) possess good monodispersity and a uniform CdS shell of ca.15 nm. This composite exhibits excellent photo-Fenton (ph-F) activity toward the degradation of methylene blue (MB) in a wide pH working range of 4.5-11 under the visible light irradiation. A series of control experiments demonstrate the unique Y-S structure contributes to the enhanced activity, where the separation of hole-electron pair from CdS and the reduction of Fe(2+) from Fe(3+) are mutually promoted. The similar efficiency can also be achieved when the shell component changes to TiO2 or CeO2, demonstrating a general strategy for the design of robust ph-F agent.

Fe3O4/SiO2/C nanocomposite as a high-performance Fenton-like catalyst in a neutral environment

Fe₃O₄/SiO₂/C nanocomposite could be used as high-performance Fenton-like catalyst in neutral environment with fast kinetics.

Heterogeneous Fenton-like oxidation of petrochemical wastewater using a magnetically separable catalyst (MNPs@C): process optimization, reaction kinetics and degradation mechanisms

MNPs@C magnetic composite was synthesized and applied as a heterogeneous catalyst in the Fenton oxidation for PCW treatment. The organic compounds were degraded by the ˙OH radicals released from decomposition of H₂O₂ in the presence of MNPs@C.

Nanoscale zero-valent iron incorporated with nanomagnetic diatomite for catalytic degradation of methylene blue in heterogeneous Fenton system

Nanoscale zero-valent iron (nZVI) incorporated with nanomagnetic diatomite (DE) composite material was prepared for catalytic degradation of methylene blue (MB) in heterogeneous Fenton system. The material was constructed by two facile steps: Fe3O4 magnetic nanoparticles were supported on DE by chemical co-precipitation method, after which nZVI was incorporated into magnetic DE by liquid-phase chemical reduction strategy. The as-prepared catalyst was characterized by scanning electron microscopy, Fourier-transform infrared spectroscopy, X-ray diffraction, magnetic properties measurement and nitrogen adsorption-desorption isotherm measurement. The novel nZVI@Fe3O4-diatomite nanocomposites showed a distinct catalytic activity and a desirable effect for degradation of MB. MB could be completely decolorized within 8 min and the removal efficiency of total organic carbon could reach to 90% after reaction for 1 h.

Natural kaolin derived stable SBA-15 as a support for Fe/BiOCl: a novel and efficient Fenton-like catalyst for the degradation of 2-nitrophenol

The ordered mesoporous material SBA-15 (FCSBA-15) with an enhanced hydrothermal stability was successfully synthesized from natural kaolin in the presence of a fluorocarbon surfactant.

Facile synthesis of uniform yolk–shell structured magnetic mesoporous silica as an advanced photo-Fenton-like catalyst for degrading rhodamine B

Uniform yolk–shell structured magnetic mesoporous silica nanosphere was fabricated via an ultrasound assisted etching method and demonstrated as an efficient photo-Fenton-like catalyst.

Powder activated carbon/Fe3O4 hybrid composite as a highly efficient heterogeneous catalyst for Fenton oxidation of tetracycline: degradation mechanism and kinetic

In this work, we prepared and used a composite of powder activate carbon/Fe₃O₄ magnetic nanoparticles (PAC/Fe₃O₄ MNPs) as a heterogeneous catalyst to remove tetracycline (TC) from aqueous solution.