Stereoselective synthesis of (R)-(+)-1-(1-naphthyl)ethylamine by ω-amine transaminase immobilized on amino modified multi-walled carbon nanotubes and biocatalyst recycling

Immobilized enzymes exhibit favorable advantages in biocatalysis, such as high operation stability, feasible reusability, and improved organic solvents tolerance. Herein, an immobilized ω-amine transaminase AtATA@MWCNTs-NH2 is successfully prepared using amino modified multi-walled carbon nanotubes as carrier and glutaraldehyde as crosslinker. Under the optimum immobilization conditions, the activity recovery is 78.7%. Compared with purified enzyme AtATA, AtATA@MWCNTs-NH2 possesses superior stability, even in harsh conditions (e.g., high temperature, acidic or alkali environment, and different kind of organic solvents). To simplify the separation and extraction of products, we choose methanol (10%, v/v) as the cosolvent, replacing DMSO (20%, v/v) in our previous work, for the catalytic reaction of AtATA@MWCNTs-NH2. AtATA@MWCNTs-NH2 can be used for stereoselective synthesis (R)-(+)- 1(1-naphthyl)ethylamine ((R)-NEA) for 15 cycles, with the e.e.p (enantiomeric excess) > 99.5%. The catalytic process of AtATA@MWCNTs-NH2 achieves cycle production of (R)-NEA using methanol as cosolvent.

Immobilization of lipase by dialdehyde cellulose crosslinked magnetic nanoparticles

Cellulose microcrystalline (MCC) was widely used in pharmaceutical and chemical industries because of its low degree of polymerization and large specific surface area. As its modified form, dialdehyde cellulose (DAC) was used for cross-linking and immobilizing Rhizopus lipase together with magnetic nanoparticles (MNPs) due to its active aldehyde groups. In this study, in order to maintain the original enzyme activity as much as possible and improve the stability of lipase, the Rhizopus lipase was successfully immobilized on the magnetic dialdehyde cellulose nanoparticles (MDC). Specifically, the immobilization conditions including dosage of DAC, concentration of enzyme, immobilization time and temperature together with pH value of the reaction medium were optimized. Maximum immobilization yield (60.03 ± 0.49%) and recovery activity (88.88 ± 0.61%) can be obtained under the optimal process conditions. The changes in secondary structures of immobilized enzyme revealed the increment in conformational rigidity, which can be reflected in temperature and pH stability as well as tolerance of organic reagents. Additionally, the recovery activity of immobilized enzyme still reached 50.60 ± 0.59% after 30 d of storage and 52.10 ± 0.57% retained after 6 cycles. These results indicated the ideal application prospect of MDC in immobilized enzymes.

Simultaneous removal of heavy metals and cyanate in a wastewater sample using immobilized cyanate hydratase on magnetic-multiwall carbon nanotubes

Global environmental problems allied with waste management require novel approaches for the simultaneous removal of heavy metals and other associated compounds including cyanate. In this study, iron-oxide filled multi-walled carbon nanotubes (m-MWCNTs) were successfully synthesized and characterized by field emission gun scanning electron microscopy (FEGSEM), high-resolution transmission electron microscopy (HRTEM) and X-ray diffraction (XRD). The m-MWCNTs were amino-functionalized for the covalent immobilization of a recombinant cyanate hydratase (rTl-Cyn), and were characterized by fourier transform infrared (FTIR) spectroscopy. The immobilized rTl-Cyn on the m-MWCNTs (m-MWCNT-rTl-Cyn) had long term storage stability and showed great potential towards cyanate biodegradability. We found that m-MWCNT-rTl-Cyn retained >94% of the initial activity even after 10 repeated cycles of bio-catalysis. Strikingly, the m-MWCNT-rTl-Cyn simultaneously reduced the concentration of chromium (Cr), iron (Fe), lead (Pb) and copper (Cu) by 39.31, 35.53, 34.48 and 29.63%, respectively as well as the concentration of cyanate by ≥84%, in a synthetic wastewater sample.

Highly active nanobiocatalysis in deep eutectic solvents via metal-driven enzyme-surfactant nanocomposite

Metal-driven papain-surfactant nanocomposite (PA@MSNC), a novel soft nanobiocatalyst, was successfully prepared via one-pot self-assembly technique in aqueous solution for the biosynthesis of N-(benzyloxycarbonyl)-L-alanyl-L-glutamine (Z-Ala-Gln) dipeptide in deep eutectic solvents (DESs). The metal-driven self-assembly process generated PA@MSNC as nanospheres of ˜130 nm in diameter, with high protein loading and relative enzyme activity of 420 mg/g and 80% (4270 U/g protein), respectively. PA@MSNC showed high apparent substrate affinity and catalytic efficiency. The stability of PA@MSNC at high temperature and extreme pH was significantly higher than that of free PA. Catalysis efficiency for the biosynthesis of Z-Ala-Gln by PA@MSNC in choline chloride: glycerol reaction medium was 1.69-fold higher than that of free PA, achieving a high product yield of 75.7% within 4 h. PA@MSNC also showed better techno-economic performance. We propose that enzyme-surfactant nanocomposite via metal-driven dynamically reversible coordination interactions contribute simultaneously promotes catalytic flexibility and configurational stability. The generated PA@MSNC has potential practical implications for green synthesis of dipeptide in DESs.

Burkholderia cepacia lipase immobilized on heterofunctional magnetic nanoparticles and its application in biodiesel synthesis

Biodiesel production using immobilized lipase as a biocatalyst is a promising process. The performance of immobilized lipase is mainly determined by supporting materials and immobilization method. To avoid the shortcomings of adsorption and covalent bonding methods, in this study, we developed a novel heterofunctional carrier of being strengthened anion exchange and weakened covalent binding to avoid activity loss and improve operational stability of the immobilized lipase. 2,3-epoxypropyltrimethylammonium chloride with epoxy and quaternary ammonium group and glutaraldehyde were grafted onto aminated magnetic nanoparticles (AMNPs) to generate a new matrix, named GEAMNP. Then Burkholderia cepacia lipase (BCL) was immobilized on GEAMNP via anion exchange and covalent bonding. The transesterification between soybean oil and methanol was used to test the activities. Activity recovery of the immobilized BCL was up to 147.4% and the corresponding transesterification activity was 1.5-fold than that of BCL powder. The immobilized lipase was further used for biodiesel production to confirm its feasibility. The fatty acid methyl esters conversion yield could reach 96.8% in the first 12 h. Furthermore, the immobilized lipase, BCL-GEAMNP showed markedly improved operational stability, better reusability and higher esters than BCL-GAMNP, where MNPs were only modified with (3-aminopropyl) triethoxysilane and glutaraldehyde.

Bio-catalytic performance and dye-based industrial pollutants degradation potential of agarose-immobilized MnP using a Packed Bed Reactor System

In this study, the matrix-entrapment technique was adopted to immobilize a novel manganese peroxidase (MnP). Agarose beads developed from 3.0% agarose concentration furnished the preeminent immobilization yield (92.76%). The immobilized MnP exhibited better resistance to changes in the pH and temperature as compared to the free counterpart, with optimal conditions being pH 6.0 and 45°C. Thermal and storage stability characteristics were significantly improved after immobilization, and the immobilized-MnP displayed higher tolerance against different temperatures than free MnP state. After 72h, the insolubilized MnP retained its activity up to 41.2±1.7% and 33.6±1.4% at 55°C and 60°C, respectively, and 34.3±1.9% and 22.0±1.1% activities at 65°C and 70°C, respectively, after 48h of the incubation period. A considerable reusability profile was recorded with ten consecutive cycles. Moreover, to explore the industrial applicability, the agarose-immobilized-MnP was tested for bioremediation of textile industry effluent purposes. After six consecutive cycles, the tested effluents were decolorized to different extents (with a maximum of 98.4% decolorization). In conclusion, the remarkable bioremediation potential along with catalytic, thermo-stability, reusability, as well as storage stability features of the agarose-immobilized-MnP reflect its prospects as a biocatalyst for bioremediation and other industrial applications.

Carbon nanotube filled with magnetic iron oxide and modified with polyamidoamine dendrimers for immobilizing lipase toward application in biodiesel production

Superparamagnetic multi-walled carbon nanotubes (mMWCNTs) were prepared by filling multi-walled carbon nanotubes (MWCNTs) with iron oxide, and further modified by linking polyamidoamine (PAMAM) dendrimers (mMWCNTs-PAMAM) on the surface. Then, mMWCNTs-PAMAM was employed as the carrier and successfully immobilized Burkholderia cepacia lipase (BCL) via a covalent method (BCL-mMWCNTs-G3). The maximum activity recovery of the immobilized lipase was 1,716% and the specific activity increased to 77,460 U/g-protein, 17-fold higher than that of the free enzyme. The immobilized lipase displayed significantly enhanced thermostability and pH-resistance, and could efficiently catalyze transesterification to produce biodiesel at a conversion rate of 92.8%. Moreover, it possessed better recycling performance. After 20 cycles of repeated used, it still retained ca. 90% of its original activity, since the carbon nanotube-enzyme conjugates could be easily separated from the reaction mixture by using a magnet. This study provides a new perspective for biotechnological applications by adding a magnetic property to the unique intrinsic properties of nanotubes.

Lipase-catalyzed modification of natural Sapium sebiferum oil-based polyol for synthesis of polyurethane with improved properties

Sapium sebiferum oil-based polyol was modified by lipase hydrolysis for primary alcohols and further synthesis of polyurethane with improved properties.

The chemistry, morphology, crystal structure and hydrophilicity properties of wood fibers treated by a magnetic immobilized laccase–mediator system

The chemistry, morphology, crystal structure and hydrophilicity properties of wood fibers treated by magnetic immobilized laccase–mediator system (ILMS) which had never previously been examined were investigated.

Nanobioconjugates of Candida antarctica lipase B and single-walled carbon nanotubes in biodiesel production

Carboxylated single-walled carbon nanotubes (SWCNTCOOH) were used as support for covalent immobilization of Candida antarctica lipase B (CaL-B) using linkers with different lengths. The obtained nanostructured biocatalysts with low diffusional limitation were tested in batch mode in the ethanolysis of the sunflower oil. SWCNTCOOH-CaL-B proved to be a highly efficient and stable biocatalyst in acetonitrile (83.4% conversion after 4h at 35°C, retaining >90% of original activity after 10 cycles).

Enzyme-conjugated ZIF-8 particles as efficient and stable Pickering interfacial biocatalysts for biphasic biocatalysis

Enzyme-based biphasic catalytic reactions were successfully accomplished by utilizing CRL-conjugated ZIF-8 particles as robust Pickering interfacial biocatalysts.

A new lipase–inorganic hybrid nanoflower with enhanced enzyme activity

A new hybrid nanoflower biocatalyst was synthesized using the organic component of Burkholderia cepacia lipase and inorganic component of calcium phosphate.

Immobilization of laccase on magnetic silica nanoparticles and its application in the oxidation of guaiacol, a phenolic lignin model compound

Immobilisation of Aspergillus laccase on magnetic silica nanoparticles via a facile and efficient process and its high catalytic efficiency for guaiacol as phenolic lignin model compound was investigated.