Study of the Antibacterial Capacity of a Biomaterial of Zeolites Saturated with Copper Ions (Cu2+) and Supported with Copper Oxide (CuO) Nanoparticles

In this work, copper (II) ions were saturated and copper oxide nanoparticles (CuO NPs) were supported in natural zeolite from Chile; this was achieved by making the adsorbent material come into contact with a copper ion precursor solution and using mechanical agitation, respectively. The kinetic and physicochemical process of the adsorption of copper ions in the zeolite was studied, as well as the effect of the addition of CuO NPs on the antibacterial properties. The results showed that the saturation of copper (II) ions in the zeolite is an efficient process, obtaining a 27 g L^-1 concentration of copper ions in a time of 30 min. The TEM images showed that a good dispersion of the CuO NPs was obtained via mechanical stirring. The material effectively inhibited the growth of Gram-negative and Gram-positive bacteria that have shown resistance to methicillin and carbapenem. Furthermore, the zeolite saturated with copper at the same concentration had a better bactericidal effect than the zeolite supported with CuO NPs. The results suggested that the ease of processing and low cost of copper (II) ion-saturated zeolitic material could potentially be used for dental biomedical applications, either directly or as a bactericidal additive for 3D printing filaments.

A Waste-Minimized Approach to Cassar-Heck Reaction Based on POLITAG-Pd0 Heterogeneous Catalyst and Recoverable Acetonitrile Azeotrope

Three different Pd0 -based heterogeneous catalysts were developed and tested in the Cassar-Heck reaction (i. e., copper-free Sonogashira reaction) aiming at the definition of a waste minimized protocol. The cross-linked polymeric supports used in this investigation were designed to be adequate for different reaction media and were decorated with different pincer-type ionic ligands having the role of stabilizing the formation and dimension of palladium nanoparticles. Among the ionic tags tested, bis-imidazolium showed the best performances in terms of efficiency and durability of the metal catalytic system. Eventually, aqueous acetonitrile azeotrope was selected as the reaction medium as it allowed the best catalytic efficiency combined with easy recovery and reuse. Finally, the synergy between the selected catalyst and reaction medium allowed to obtain highly satisfactory isolated yields of a variety of substrates while using a low amount of metal catalyst. The high performance of the designed POLymeric Ionic TAG (POLITAG)-Pd0 , along with its good selectivity achieved in a copper-free process, also led to a simplified purification procedure allowing the minimization of the waste generated as also proven by the very low E-factor values (1.4-5) associated.

Recent Advancement of Ullmann Condensation Coupling Reaction in the Formation of Aryl-Oxygen (C-O) Bonding by Copper-Mediated Catalyst

Transition metal-catalyzed chemical transformation of organic electrophiles and organometallic reagents belong to the most important cross coupling reaction in organic synthesis. The biaryl ether division is not only popular in natural products and synthetic pharmaceuticals but also widely found in many pesticides, polymers, and ligands. Copper catalyst has received great attention owing to the low toxicity and low cost. However, traditional Ullmann-type couplings suffer from limited substrate scopes and harsh reaction conditions. The introduction of homogeneous copper catalyst with presence of bidentate ligands over the past two decades has totally changed this situation as these ligands enable the reaction promoted in mild condition. The reaction scope has also been greatly expanded, rendering this copper-based cross-coupling attractive for both academia and industry. In this review, we will highlight the latest progress in the development of useful homogeneous copper catalyst with presence of ligand and heterogeneous copper catalyst in Ullmann type C-O cross-coupling reaction. Additionally, the application of Ullmann type C-O cross coupling reaction will be discussed.

Obtaining Nanoparticles of Chilean Natural Zeolite and its Ion Exchange with Copper Salt (Cu2+) for Antibacterial Applications

This article describes the production of nanoparticles of Chilean natural zeolite, using three size reduction methods: Ball mill, microgrinding, and microfluidization. Morphological characterization of samples indicated an average diameter of 37.2 ± 15.8 nm of the zeolite particles. The size reduction and chemical treatments did not affect the morphology or integrity of the zeolite. An increase of the zeolite samples’ Si/Al ratio was observed after the acid treatment and was confirmed by SEM-EDX analysis. Moreover, the effectiveness of the copper salt ion exchange (Cu²⁺) to the zeolite nanoparticles was analyzed by SEM-EDX. XRD analysis indicated that clinoptilolite and mordenite are the main phases of Chilean natural zeolite, and the crystalline structure was not affected by the modification processes. The FTIR characterization showed the presence of chemical bonds of copper with the zeolite nanoparticle framework. The ion-exchanged zeolite nanoparticles were evaluated for antibacterial behavior by the disc diffusion method. Additionally, the minimum inhibitory concentration and minimum bactericidal concentration were obtained. Microbiological assays with copper-exchanged nanozeolites showed an antimicrobial activity with a bactericidal effect against Escherichia coli and Staphylococcus aureus, which are the primary pathogens of food and are also resistant to multiple drugs. In this study, a new application for natural nanozeolites is demonstrated, as the incorporated copper ions (Cu²⁺) in nanozeolites registered a productive antibacterial activity.

Diaryl ethers synthesis: nano-catalysts in carbon-oxygen cross-coupling reactions

The diaryl ether moiety is not only prevalent in a significant number of natural products and synthetic pharmaceuticals but also widely found in many pesticides, polymers, and ligands. Ullmann-type cross-coupling reactions between phenols and aryl halides are regarded as one of the most important methods for the synthesis of this important and versatile structural motif. In recent years, the use of nano-sized metal catalysts in this coupling reaction has attracted a lot of attention because of these catalysts with their high surface-to-volume ratio, high surface energy, and reactive morphology allows for rapid C-O bond formation under mild and ligand-free conditions. In this review we will highlight the power of these catalysts in Ullmann-type C-O cross-coupling reactions.

Formal total synthesis of salvianolic acid N

Salvianolic acid N was synthesized starting from 3,4-dimethoxybenzaldehyde in 11 steps and with an overall yield of 11%. The key reaction steps were the Wittig reaction for Z-stereoselectivity, the copper catalyzed intramolecular cyclization for seven membered ring skeleton, and the deprotected allylic group with Pd catalysis.

PEPPSI-SONO-SP2: a new highly efficient ligand-free catalyst system for the synthesis of tri-substituted triazine derivatives via Suzuki–Miyaura and Sonogashira coupling reactions under a green approach

Consecutive Suzuki–Miyaura and Sonogashira cross coupling reactions catalyzed by a new competent palladium catalyst PEPPSI-SONO-SP² under mild and green reaction conditions.

A coordination driven self-assembled Pd6L8 nanoball catalyses copper and phosphine-free Sonogashira coupling reaction in both homogeneous and heterogeneous formats

A self-assembled Pd₆L₈ nanocage catalysed copper free Sonogashira reaction under mild and aerobic conditions, at 100 ppm catalyst loading in aqueous medium in the homogeneous phase, and at 500 ppm in the heterogeneous phase.

Controllable synthesis of Pd@ZIF-L catalysts by an assembly method

Pd@ZIF-L catalysts with uniform morphology and better catalytic performance were fabricated by controlling the 2-MeIM/Zn²⁺ and PVP/Zn²⁺ molar ratios.