Enhanced modified poly-tyrosine voltammetric sensor for the quantification detection of salivary pepsin

Pepsin as an aspartic acid protease member and one of the three foremost proteolytic enzymes in the digestive system is essential to be detected. An electrochemically polymerized tyrosine film on carbon paste electrode (pTyr/CPE) has been synthesized by electro-polymerization donating an affordable electrochemical sensor to sense salivary pepsin as a diagnostic technique for gastroesophageal reflux disease (GRD) due to saliva collection is non-invasive and relatively comfortable. The pTyr/CPE was applied for Voltammetric sensing of pepsin and its quantification in phosphate buffer solution of pH 2.0 (PBS). Scanning electron microscopy (SEM) was conducted to learn the surface morphology. Cyclic voltammetry (CV), differential pulse voltammetry (DPVs), chronoamperometry (CA), and electrochemical impedance spectroscopy (EIS) were developed to realize the electrocatalytic activity of the sensor. The pTyr/CPE proceeded as a sensitive detector to pepsin with two linear ranges from 1 to 20 & 20 to 100 ng/mL donating two limits of detection as 0.5 & 0.09 ng/mL, respectively, and high selectivity toward pepsin, as well as stability and fast response of 1.5 s. Consequently, it is guessed that the pTyr/CPE sensor could be supportive for the initial diagnosis of GRD through the detection of pepsin in saliva. Finally, we quantified the pepsin levels in saliva samples of LPR patients (n = 2), showing that the results were agreeable with those from the electrochemical sensor.

A voltammetric method coupled with chemometrics for determination of a ternary antiparkinson mixture in its dosage form: greenness assessment

An electroanalytical methodology was developed by direct differential pulse voltammetric (DPV) measurement of Levodopa (LD), Carbidopa (CD) and Entacapone (ENT) mixture using bare glassy carbon electrode (GCE) in Britton Robinson (BR) buffer (pH = 2.0). A multivariate calibration model was then applied to the exported preprocessed voltammetric data using partial least square (PLS) as a chemometric tool. Additionally, the model was cross-validated and the number of latent variables (LVs) were determined to produce a reliable model for simultaneous quantitation of the three drugs either in their synthetic mixtures or in their marketed pharmaceutical formulation with high accuracy and precision. Data preprocessing was used to tackle the problem of lacking bi-linearity which is commonly found in electrochemical data. The proposed chemometric model was able to provide fast and reliable technique for quantitative determination of antiparkinson drugs in their dosage forms. This was successfully achieved by utilizing sixteen mixtures as calibration set and nine mixtures as validation set. The percent recoveries for LD, CD and ENT were found to be 100.05% ± 1.28%, 100.04% ± 0.53% and 99.99% ± 1.25%, respectively. The obtained results of the proposed method were statistically compared to those of a previously reported High Performance Liquid Chromatography (HPLC) methodology. Finally, the presented analytical method strongly supports green analytical chemistry regarding the minimization of potentially dangerous chemicals and solvents, as well as reducing energy utilization and waste generation.

A Novel Nano-Composite CSNPs/PVP/CoONPs Coating for Improving Corrosion Resistance of Ti-6Al-4V Alloy as a Dental Implant

A new nano-coating of chitosan nanoparticles/polyvinylpyrrolidone/cobalt oxide nanoparticles (CSNPs/PVP/CoONPs) was performed in this work. The newly designed nano-coating comprises a copolymer and inorganic matrices. This nano-coating was used to cover the Ti-6Al-4V alloy surface as a newly designed dental alloy, and then its corrosion properties were studied through different electrochemical techniques. The results reveal that this novel coating improved the corrosion resistance of the Ti-6Al-4V alloy in artificial saliva solution by reaching 17.7 MΩ cm2. The new fabricated biocompatible coating (CSNPs/PVP/CoONPs) greatly enhanced the electrochemical corrosion resistance by giving a high protection efficiency of 90.87% and a low hydrogen evolution rate in artificial saliva solution at 37 °C. The observed results were confirmed by scanning electron microscopy (SEM), Vickers microhardness testing, coating thickness tests, high-resolution transmission electron microscopy (HRTEM), and energy-dispersive X-ray analysis (EDX).

An Innovative Simple Electrochemical Levofloxacin Sensor Assembled from Carbon Paste Enhanced with Nano-Sized Fumed Silica

A new electrochemical sensor for the detection of levofloxacin (LV) was efficiently realized. The aim was to develop a new, cheap, and simple sensor for the detection of LV, which is used in various infections due to its pharmacological importance. It consists of carbon paste (CP) enhanced with nano-sized fumed silica (NFS). NFS has a very low bulk density and a large surface area. The carbon paste-enhanced NFS electrode (NFS/CPE) showed great electrocatalytic activity in the oxidation of 1.0 mM LV in Britton–Robinson buffer (BR) at pH values ranging from 3.0 to 8.0. Cyclic voltammetry (CV) and differential pulse voltammetry (DPV) were used; the peak current value (I_p) of the NFS/CPE sensor was 2.7 times that of the bare electrode, ensuring its high electrocatalytic activity. Electrochemical impedance spectroscopy (EIS) was performed at a peak potential (E_p) of +1066 mV, yielding a resistance of 10 kΩ for the designed NFS/CPE sensor compared to 2461 kΩ for the bare electrode, indicating the high conductivity of the modified sensor and verifying the data observed using the CV technique. Surface descriptions were determined by scanning electron microscopy (SEM) and energy dispersive X-ray analysis (EDX). The variation in the concentration of LV (2.0 to 1000 µM) was considered in BR buffer (pH = 5.0) at a scan rate (SR) of 10 mV/s by the NFS/CPE. The detection and quantification limits were 0.09 µM and 0.30 µM, respectively. To evaluate the application of LV in real samples, this procedure was established on Quinostarmax 500 mg tablets and human plasma samples. Reasonable results were obtained for the detection of LV.

Fast Detection of Entacapone by a Lanthanide-Organic Framework with Rhombic Channels

Entacapone (ENT) is a powerful catechol-O-methyl transferase inhibitor that is used for the diagnosis and treatment of Parkinson's syndrome, but the amount used must be well controlled to avoid overtreatment and side effect. Fast and selective detection of ENT needs well-matched energy levels and well-designed sensor-ENT interaction which is highly challenging. In this work, a water stable europium-based metal-organic framework (Eu-TDA) was synthesized to detect ENT by luminescence with excellent reusability and selectivity in the presence of main coexisting and interference species of plasma with a limit of detection of 5.01 μM. The experimental results showed that the luminescence of Eu-TDA can be effectively quenched by ENT via well-designed photoinduced electron transfer mechanism and internal filtration effect mechanism in the system.

Electrochemical immunosensor based on Au/Co-BDC/MoS2 and DPCN/MoS2 for the detection of cardiac troponin I

The content of cardiac troponin I (CTnI) in human blood is the key factor in judging acute myocardial infarction (AMI). In order to detect the content of CTnI, we constructed a sandwich-type electrochemical immunosensor based on hydrogen peroxide (H₂O₂) as a signal source. Dendritic platinum-copper alloy nanoparticles (DPCN) loaded on molybdenum disulfide (MoS₂) nanosheets (DPCN/MoS₂) as secondary antibodies (Ab₂) label provided signal amplification. The hollow three-dimensional (3D) pyramid-shaped structure of DPCN exposed abundant active sites and exhibited excellent catalytic properties. MoS₂ nanosheets with flower-like structure and a larger specific surface area can effectively load more DPCN. The combination of MoS₂ and DPCN enhanced the catalytic performance of DPCN/MoS₂ towards H₂O₂ reduction and realized signal amplification. For the substrate material, the two-dimensional (2D) metal-organic framework (Co-BDC, 1,4-benzenedicarboxylate is abbreviated as BDC) was hybridized with MoS₂ nanosheets to load gold nanoparticles (Au NPs). The obtained Au/Co-BDC/MoS₂ had low catalytic activity and excellent electrical conductivity, which was used to load primary antibodies (Ab₁) to effectively enhance the sensitivity. Under the best conditions, we constructed the immunosensor with the detection range of 10 fg/mL to 100 ng/mL and the limit of detection (LOD) of 3.02 fg/mL. At the same time, the content of CTnI in human serum was tested with satisfactory results. Therefore, the constructed immunosensor has important significance in the sensitive and accurate detection of CTnI and early diagnosis of AMI.

Electroanalysis of Catecholamine Drugs using Graphene Modified Electrodes

Background:

Catecholamine drugs are a family of electroactive pharmaceutics, which are widely analyzed through electrochemical methods. However, for low level online determination and monitoring of these compounds, which is very important for clinical and biological studies, modified electrodes having high signal to noise ratios are needed. Numerous materials including nanomaterials have been widely used as electrode modifies for these families during the years. Among them, graphene and its family, due to their remarkable properties in electrochemistry, were extensively used in modification of electrochemical sensors.

Objective:

In this review, working electrodes which have been modified with graphene and its derivatives and applied for electroanalyses of some important catecholamine drugs are considered.

Role of Green Chemistry in Antipsychotics' Electrochemical Investigations Using a Nontoxic Modified Sensor in McIlvaine Buffer Solution

A new low-cost green electrochemical sensor based on nontoxic polyethylene glycol (PEG) and silver nanoparticles was used to improve the sensitivity of the carbon paste electrode for the investigation of olanzapine (OLZ) in dosage arrangements and in the existence of its coadministered drug fluoxetine and in the drug formulation. Scanning electron microscopy measurements were carried out to emphasize the morphology of the electrode surface. Cyclic voltammetry and differential pulse voltammetry were used to explore the diffusion and linearity behaviors of OLZ. Impedance spectroscopy measurements were determined to investigate the ac behavior of OLZ and then an ideal electrical circuit was modeled. A linear calibration was obtained from 1.0 × 10^-8 to 1.25 × 10^-4 M. The limit of detection was 1.5 × 10^-9 M, whereas the limit of quantification was 5 × 10^-9 M. The way has been wholly authenticated concerning linearity, precision, accuracy, reproducibility, sensitivity, and selectivity.

A novel electrochemical analysis of the legal psychoactive drug caffeine using a zeolite/MWCNT modified carbon paste sensor

Caffeine (Caf) is a natural central nervous system stimulant categorized by the US Food and Drug Administration as a safe drug and its maximal amount in soft drinks has been approximately determined to be lower than 200 mg L⁻¹.

A novel electrochemical nanosensor based on NH2-functionalized multi walled carbon nanotubes for the determination of catechol-orto-methyltransferase inhibitor entacapone

In this study, an antiparkinson drug Entacapone (ENP) is electrochemically investigated under optimized conditions using NH₂ functionalized multi walled carbon nanotubes (NH₂fMWCNT) decorated over glassy carbon electrode (GCE). The surface morphology of the NH₂fMWCNT/GCE was probed by scanning electron microscopy (SEM) armed with EDX analysis. Electrochemical impedance spectroscopy (EIS) was employed to investigate the electron transfer capability of modified and bare electrodes. Cyclic voltammetry was used to compare the redox response of ENP on the surface of modified and unmodified electrodes. The influence of interfering agents was also studied to examine the selectivity of the designed sensor. For the purpose of practical applicability of the proposed method, differential pulse voltammetric method was applied for the investigation of ENP in real samples i.e., tablet, human serum and urine. Almost 100% recovery percentages were obtained from tablet, serum and urine samples with RSD% values of less than 2% for all the samples, thus, suggesting promising applicability of the designed electrochemical sensing platform (NH₂fMWCNT/GCE) for determination of ENP in pharmaceutical dosage and real samples.

Investigation of different spectrophotometric and chemometric methods for determination of entacapone, levodopa and carbidopa in ternary mixture

New, simple, accurate and sensitive UV spectrophotometric and chemometric methods have been developed and validated for determination of Entacapone (ENT), Levodopa (LD) and Carbidopa (CD) in ternary mixture. Method A is a derivative ratio spectra zero-crossing spectrophotometric method which allows the determination of ENT in the presence of both LD and CD by measuring the peak amplitude at 249.9nm in the range of 1-20μgmL^-1. Method B is a double divisor-first derivative of ratio spectra method, used for determination of ENT, LD and CD at 245, 239 and 293nm, respectively. Method C is a mean centering of ratio spectra which allows their determination at 241, 241.6 and 257.1nm, respectively. Methods B and C could successfully determine the studied drugs in concentration ranges of 1-20μgmL^-1 for ENT and 10-90μgmL^-1 for both LD and CD. Methods D and E are principal component regression and partial least-squares, respectively, used for the simultaneous determination of the studied drugs by using seventeen mixtures as calibration set and eight mixtures as validation set. The developed methods have the advantage of simultaneous determination of the cited components without any pre-treatment. All the results were statistically compared with the reported methods, where no significant difference was observed. The developed methods were satisfactorily applied to the analysis of the investigated drugs in their pure form and in pharmaceutical dosage forms.

One-pot in situ synthesis of a CoFe2O4nanoparticle-reduced graphene oxide nanocomposite with high performance for levodopa sensing

We demonstrate that a new nanocomposite of CoFe₂O₄-reduced graphene oxide can be used as an enhanced electrochemical sensing platform for levodopa.