Graphene-Iron Ore Tailings-Based Cementitious Composites with High Early Flexural Strength

Graphene is a two-dimensional nanomaterial with excellent mechanical, electrical and thermal properties. The application of graphene in cement-based materials has good prospects. However, the mechanical properties of cement-based materials are difficult to be significantly enhanced by ordinary graphene nanoplates. In this paper, nitrogen-doped graphene is first reported as an additive with dosages of 0.01, 0.02, 0.03, 0.04 and 0.05 wt.%, respectively, to prepare iron ore tailings-based cementitious composites. The iron ore tailings-based cementitious composite with 0.02 wt.% graphene shows an extremely high flexural strength of 15.05 MPa at 3 days, which is 134.4% higher than that of the iron ore tailings-based cementitious composite without graphene. The effects of graphene content and curing age on the flexural strength and microstructure of iron ore tailings-based cementitious composites were studied. In particular, the scanning electron microscope was adopted to observe the micromorphology of the composites. It is helpful to understand the graphene reinforcement mechanism for the high early flexural strength of iron ore tailings-based cementitious composites. By altering the morphology of iron ore tailings-based cementitious composites, graphene plays two roles in the composites. One role is to connect C-(A)-S-H gels, ettringite and other hydrated crystals to construct a three-dimensional structure. The other is to attract iron ore tailings distributed on its platform to enhance its flexural strength properties. These findings provide favorable guidance for the performance enhancement and mechanism replenishment of graphene-reinforced cementitious composites.

An In-Depth Exploration of the Electrochemical Oxygen Reduction Reaction (ORR) Phenomenon on Carbon-Based Catalysts in Alkaline and Acidic Mediums

Detailed studies of the electrochemical oxygen reduction reaction (ORR) on catalyst materials are crucial to improving the performance of different electrochemical energy conversion and storage systems (e.g., fuel cells and batteries), as well as numerous chemical synthesis processes. In the effort to reduce the loading of expensive platinum group metal (PGM)-based catalysts for ORR in the electrochemical systems, many carbon-based catalysts have already shown promising results and numerous investigations on those catalysts are in progress. Most of these studies show the catalyst materials’ ORR performance as current density data obtained through the rotating disk electrode (RDE), rotating ring-disk electrode (RRDE) experiments taking cyclic voltammograms (CV) or linear sweep voltammograms (LSV) approaches. However, the provided descriptions or interpretations of those data curves are often ambiguous and recondite which can lead to an erroneous understanding of the ORR phenomenon in those specific systems and inaccurate characterization of the catalyst materials. In this paper, we presented a study of ORR on a newly developed carbon-based catalyst, the nitrogen-doped graphene/metal-organic framework (N-G/MOF), through RDE and RRDE experiments in both alkaline and acidic mediums, taking the LSV approach. The functions and crucial considerations for the different parts of the RDE/RRDE experiment such as the working electrode, reference electrode, counter electrode, electrolyte, and overall RDE/RRDE process are delineated which can serve as guidelines for the new researchers in this field. Experimentally obtained LSV curves’ shapes and their correlations with the possible ORR reaction pathways within the applied potential range are discussed in depth. We also demonstrated how the presence of hydrogen peroxide (H2O2), a possible intermediate of ORR, in the alkaline electrolyte and the concentration of acid in the acidic electrolyte can maneuver the ORR current density output in compliance with the possible ORR pathways.

Fabrication and Integration of Functionalized N-rGO-Ni/Ag and N-rGO-Ni/Co Nanocomposites as Synergistic Oxygen Electrocatalysts in Fuel Cells

Fabrication of composites by developing simple techniques can be an efficient way to modify the desire properties of the materials. This paper presents a detailed study on synthesis of low cost and efficient nitrogen doped reduced graphene oxide nickle-silver (N-rGO-Ni/Ag) and nickel-cobalt (N-rGO-Ni/Co) nanocomposites as electrocatalysts in fuel cell using one-pot blended reflux condensation route. An admirable correlation in the structures and properties of the synthesized nanocomposites was observed. The Oxygen Reduction Reaction (ORR) values for N-rGO-Ni/Ag and N-rGO-Ni/Co calculated from the onset potential, using Linear Sweep Voltammetry (LSV), were found to be 1.096 and 1.146. While the half wave potential were determined to be 1.046 and 1.106, respectively, N-rGO-Ni/Ag and N-rGO-Ni/Co. The Tafel and bi-functional (ORR/OER) values were calculated as 76 and 35 mV/decade and 1.23 and 1.12 V, respectively, for N-rGO-Ni/Ag and N-rGO-Ni/Co. The lower onset and half wave potential, low charge transfer resistance (Rct = 1.20 Ω/cm2) and internal solution resistance (Rs = 8.84 × 10-1 Ω/cm2), lower Tafel values (35 mV), satisfactory LSV measurements and mass activity (24.5 at 1.056 V for ORR and 54.9 at 1.056 for OER) demonstrate the remarkable electrocatalytic activity of N-rGO-Ni/Co for both ORR and OER. The chronamperometric stability for synthesized nanocomposites was found satisfactory up to 10 h.

Chipset Nanosensor Based on N‐Doped Carbon Nanobuds for Selective Screening of Epinephrine in Human Samples

Chipset nanosensor design and fabrication are important for healthcare research and development. Herein, a functionalized chipset nanosensor is designed to monitor neurotransmitters (i.e., epinephrine (EP)) in human fluids. An interdigitated electrode array (IDA) is functionalized by N‐doped carbon nanobud (N‐CNB) and N‐doped carbon nanostructure (N‐CNS). The surface morphology of N‐CNB shows the formation of nanotubular‐like branches on sheets and micrometer‐size tubes. The N‐CNS design consists of the formation of aggregated sheets and particles in nanometer size. The irregular shape formation provides surface heterogeneity and numerous free spaces between the stacked nanostructures. N‐atoms ascertain highly active N‐CNS with multifunctional active centers, electron‐rich charged surface, and short distance pathway. The N‐CNB/IDA exhibits the best performance for EP signaling with high sensitivity and selectivity. The N‐CNB/IDA sensing performance for EP detection indicates the successful design of a highly selective and sensitive assay with low detection limit of 0.011 × 10−6 m and a broad linear range of 0.5 × 10−6 to 3 × 10−6 m. The N‐CNB/IDA exhibits a high degree of accuracy and reproducibility with RSD of 2.7% and 3.9%, respectively. Therefore, the chipset nanosensor of N‐CNB/IDA can be used for on‐site monitoring of EP in human serum samples and further used in daily monitoring of neuronal disorders.

Effect of heteroatoms on the optical properties and enzymatic activity of N-doped carbon dots

Carbon dots (CDs) are attractive nanomaterials because of their facile synthesis, biocompatibility, superior physicochemical properties, and low cost of their precursors. Recent advances in CDs have particularly relied on the modulation of their properties by heteroatom doping (e.g., nitrogen). Although nitrogen-doped CDs (N-CDs) have attracted considerable attention owing to their different properties compared to those of the original CDs, the effects of the heteroatom content and types of bonding on the properties of N-doped CDs remain underexplored. In this work, we prepared N-CDs with controlled nitrogen contents, and fully examined their optical properties, enzymatic activity, and toxicity. We demonstrate that (i) the type of carbon-heteroatom bonding (i.e., carbon-oxygen and carbon-nitrogen bonds) can be altered by changing the ratio of carbon to heteroatom sources, and (ii) both the heteroatom content and the heteroatom-bonding character significantly influence the properties of the doped CDs. Notably, N-CDs exhibited higher quantum yields and peroxidase-like activities than the non-doped CDs. Furthermore, the negatively charged N-CDs exhibited negligible cytotoxicity. Such comprehensive investigations on the physicochemical properties of N-CDs are expected to guide the design of N-CDs for targeted applications.

Benzofurazan derivatives modified graphene oxide nanocomposite: Physico-chemical characterization and interaction with bacterial and tumoral cells

Two novel graphene oxide-benzofuran derivatives composites were obtained through the covalent immobilization of [4-hydrazinyl-7nitrobenz-[2,1,3-d]-oxadiazole (NBDH) and respectively, N1-(7-nitrobenzo[c][1,2,5]oxadiazol-4-yl)benzene-1,2-diamine (NBD-PD), on graphene oxide. This covalent functionalization was achieved by activating the carboxylic groups on the surface of graphene oxide by the reaction with thionyl chloride followed by coupling with the amino group of benzofurazane derivatives to obtain the NBD derivatives grafted on graphene oxide. The formation of new materials was check by Raman spectroscopy, fluorescence, infrared spectroscopy and X-ray photoelectron spectroscopy, thermal analysis, scanning electron microscopy, and elemental mapping. The antimicrobial effect of the new composites was evaluated on Staphylococcus aureus, Escherichia coli and Pseudomonas aeruginosa, both on planktonic and adherent biofilm populations. The cytotoxic effects of the materials on human colon cancer HCT-116 cell line and the normal human fibroblast BJ cell line were evaluated by investigating cell viability and membrane integrity. Apoptosis and colony forming ability of tumor cells were also investigated following exposure to new materials. The biological results of this study have shown that the new materials have potential in combating biofilm formation and also, the tested materials induced cytotoxicity in human colon cancer HCT-116 cell line with limited effects on normal BJ fibroblasts, suggesting their antitumor potential.

Hybridized Graphene for Supercapacitors: Beyond the Limitation of Pure Graphene

Graphene-based supercapacitors have been attracting growing attention due to the predicted intrinsic high surface area, high electron mobility, and many other excellent properties of pristine graphene. However, experimentally, the state-of-the-art graphene electrodes face limitations such as low surface area, low electrical conductivity, and low capacitance, which greatly limit their electrochemical performances for supercapacitor applications. To tackle these issues, hybridizing graphene with other species (e.g., atom, cluster, nanostructure, etc.) to enlarge the surface area, enhance the electrical conductivity, and improve capacitance behaviors are strongly desired. In this review, different hybridization principles (spacers hybridization, conductors hybridization, heteroatoms doping, and pseudocapacitance hybridization) are discussed to provide fundamental guidance for hybridization approaches to solve these challenges. Recent progress in hybridized graphene for supercapacitors guided by the above principles are thereafter summarized, pushing the performance of hybridized graphene electrodes beyond the limitation of pure graphene materials. In addition, the current challenges of energy storage using hybridized graphene and their future directions are discussed.

Modulation of oxygen functional groups and their influence on the supercapacitor performance of reduced graphene oxide

Through tuning the oxygen function groups, it was demonstrated that the specific capacitance of reduced graphene oxide can increase from 136 F g⁻¹ to 182 F g⁻¹.

Tunable-Deformed Graphene Layers for Actuation

Benefiting from unique planar structure, high flexibility, splendid thermal, and electric properties; graphene as a crucial component has been widely applied into smart materials and multi-stimulus responsive actuators. Moreover, graphene with easy processing and modification features can be decorated with various functional groups through covalent or non-covalent bonds, which is promising in the conversion of environmental energy from single and/or multi-stimuli, to mechanical energy. In this review, we present the actuating behaviors of graphene, regulated by chemical bonds or intermolecular forces under multi-stimuli and summarize the recent advances on account of the unique nanostructures in various actuation circumstances such as thermal, humidity, electrochemical, electro-/photo-thermal, and other stimuli.

Hierarchical Heterostructures of Ultrasmall Fe2O3-Encapsulated MoS2/N-Graphene as an Effective Catalyst for Oxygen Reduction Reaction

In this study, a facile approach has been successfully applied to synthesize a hierarchical three-dimensional architecture of ultrasmall hematite nanoparticles homogeneously encapsulated in MoS₂/nitrogen-doped graphene nanosheets, as a novel non-Pt cathodic catalyst for oxygen reduction reaction in fuel cell applications. The intrinsic topological characteristics along with unique physicochemical properties allowed this catalyst to facilitate oxygen adsorption and sped up the reduction kinetics through fast heterogeneous decomposition of oxygen to final products. As a result, the catalyst exhibited outstanding catalytic performance with a high electron-transfer number of 3.91-3.96, which was comparable to that of the Pt/C product. Furthermore, its working stability with a retention of 96.1% after 30 000 s and excellent alcohol tolerance were found to be significantly better than those for the Pt/C product. This hybrid can be considered as a highly potential non-Pt catalyst for practical oxygen reduction reaction application in requirement of low cost, facile production, high catalytic behavior, and excellent stability.

CuAg@Ag Core-Shell Nanostructure Encapsulated by N-Doped Graphene as a High-Performance Catalyst for Oxygen Reduction Reaction

Development of a robust, cost-effective, and efficient catalyst is extremely necessary for oxygen reduction reaction (ORR) in fuel cell applications. Herein, we reported a well-defined nanostructured catalyst of highly dispersed CuAg@Ag core-shell nanoparticle (NP)-encapsulated nitrogen-doped graphene nanosheets (CuAg@Ag/N-GNS) exhibiting a superior catalytic activity toward ORR in alkaline medium. The synergistic effects produced from the unique properties of CuAg@Ag core-shell NPs and N-GNS made such a novel nanohybrid display a catalytic behavior comparable to that of the commercial Pt/C product. In particular, it demonstrated a much better stability and methanol tolerance than Pt/C under the same conditions. Because of its outstanding electrochemical performance and ease of synthesis, CuAg@Ag/N-GNS material was expected to be a promising low-cost catalyst for ORR in alkaline fuel cell applications.

Flexible Asymmetric Supercapacitors Based on Nitrogen-Doped Graphene Hydrogels with Embedded Nickel Hydroxide Nanoplates

To push the energy density limit of supercapacitors (SCs), new electrode materials with hierarchical nano-micron pore architectures are strongly desired. Graphene hydrogels that consist of 3 D porous frameworks have received particular attention but their capacitance is limited by electrical double layer capacitance. In this work, we report the rational design and fabrication of a composite hydrogel of N-doped graphene (NG) that contains embedded Ni(OH)₂ nanoplates that is cut conveniently into films to serve as positive electrodes for flexible asymmetric solid-state SCs with NG hydrogel films as negative electrodes. The use of high-power ultrasound leads to hierarchically porous micron-scale sheets that consist of a highly interconnected 3 D NG network in which Ni(OH)₂ nanoplates are well dispersed, which avoids the stacking of NG, Ni(OH)₂ , and their composites. The optimal SC device benefits from the compositional features and 3 D electrode architecture and has a high specific areal capacitance of 255 mF cm^-2 at 1.0 mA cm^-2 and a very stable, high output cell voltage of 1.45 V, which leads to an energy density of 80 μW h cm^-2 even at a high power of 944 μW cm^-2 , considerably higher than that reported for similar devices. The devices exhibit a high rate capability and only 8 % capacitance loss over 10 000 charging cycles as well as excellent flexibility with no clear performance degradation under strong bending.

Facile synthesis of 3D nitrogen-doped graphene aerogel nanomeshes with hierarchical porous structures for applications in high-performance supercapacitors

3D N-GANMs with hierarchical pores are firstly synthesized using iron nitrate as the etching agent, which display excellent supercapacitive performances.

Pyridinic and graphitic nitrogen-rich graphene for high-performance supercapacitors and metal-free bifunctional electrocatalysts for ORR and OER

A facile synthesis of nitrogen-doped graphene with high atomic percentages of pyridinic N and graphitic N is reported. The synthesized materials show superior capacitance performance and metal-free bifunctional electrocatalysis of ORR and OER.

Self-Assembled N/S Codoped Flexible Graphene Paper for High Performance Energy Storage and Oxygen Reduction Reaction

A novel flexible three-dimensional (3D) architecture of nitrogen and sulfur codoped graphene has been successfully synthesized via thermal treatment of a liquid crystalline graphene oxide-doping agent composition, followed by a soft self-assembly approach. The high temperature process turns the layer-by-layer assembly into a high surface area macro- and nanoporous free-standing material with different atomic configurations of graphene. The interconnected 3D network exhibits excellent charge capacitive performance of 305 F g(-1) (at 100 mV s(-1)), an unprecedented volumetric capacitance of 188 F cm(-3) (at 1 A g(-1)), and outstanding energy density of 28.44 Wh kg(-1) as well as cycle life of 10 000 cycles as a free-standing electrode for an aqueous electrolyte, symmetric supercapacitor device. Moreover, the resulting nitrogen/sulfur doped graphene architecture shows good electrocatalytic performance, long durability, and high selectivity when they are used as metal-free catalyst for the oxygen reduction reaction. This study demonstrates an efficient approach for the development of multifunctional as well as flexible 3D architectures for a series of heteroatom-doped graphene frameworks for modern energy storage as well as energy source applications.

Synthesis of silicon-doped reduced graphene oxide and its applications in dye-sensitive solar cells and supercapacitors

The silicon-doped reduced graphene oxide was synthesized via annealing treatment of triphenylsilane and graphene oxide. It exhibits significant enhancement in electrocatalytic and electrochemical properties.

Flour food waste derived activated carbon for high-performance supercapacitors

Activated carbon was prepared by carbonization of flour food waste residue and subsequent KOH activation. It shows great prospects in high-performance supercapacitor applications.

Doped graphene supercapacitors

Heteroatom-doped graphitic frameworks have received great attention in energy research, since doping endows graphitic structures with a wide spectrum of properties, especially critical for electrochemical supercapacitors, which tend to complement or compete with the current lithium-ion battery technology/devices. This article reviews the latest developments in the chemical modification/doping strategies of graphene and highlights the versatility of such heteroatom-doped graphitic structures. Their role as supercapacitor electrodes is discussed in detail. This review is specifically focused on the concept of material synthesis, techniques for electrode fabrication and metrics of performance, predominantly covering the last four years. Challenges and insights into the future research and perspectives on the development of novel electrode architectures for electrochemical supercapacitors based on doped graphene are also discussed.

Doped graphene: synthesis, properties and bioanalysis

We discuss early advances in the preparation of doped graphene and its unique properties as well as its applications in bioanalysis.