Evaluation of citrus pectin capped copper sulfide nanoparticles against Candidiasis causing Candida biofilms

The incidence of candidiasis has significantly increased globally in recent decades, and it is a significant source of morbidity and mortality, particularly in critically ill patients. Candida sp. ability to generate biofilms is one of its primary pathogenic traits. Drug-resistant strains have led to clinical failures of traditional antifungals, necessitating the development of a more modern therapy that can inhibit biofilm formation and enhance Candida sp. sensitivity to the immune system. The present study reports the anticandidal potential of pectin-capped copper sulfide nanoparticles (pCuS NPs) against Candida albicans. The pCuS NPs inhibit C. albicans growth at a minimum inhibitory concentration (MIC) of 31.25 μM and exhibit antifungal action by compromising membrane integrity and overproducing reactive oxygen species. The pCuS NPs, at their biofilm inhibitory concentration (BIC) of 15.63 μM, effectively inhibited C. albicans cells adhering to the glass slides, confirmed by light microscopy and scanning electron microscopy. Phase contrast microscopy pictures revealed that NPs controlled the morphological transitions between the yeast and hyphal forms by limiting conditions that led to filamentation and reducing hyphal extension. In addition, C. albicans showed reduced exopolysaccharide (EPS) production and exhibited less cell surface hydrophobicity (CSH) after pCuS NPs treatment. The findings suggest that pCuS NPs may be able to inhibit the emergence of virulence traits that lead to the formation of biofilms, such as EPS, CSH, and hyphal morphogenesis. The results raise the possibility of developing NPs-based therapies for C. albicans infections associated with biofilms.

Copper-based nanoparticles for biopolymer-based functional films in food packaging applications

This review summarizes the latest developments in the design, fabrication, and application of various Cu-based nanofillers to prepare biopolymer-based functional packaging films, focusing on the effects of inorganic nanoparticles on the optical, mechanical, gas barrier properties, moisture sensitivity, and functional properties of the films. In addition, the potential application of Cu-based nanoparticle-added biopolymer films for fresh food preservation and the effect of nanoparticle migration on food safety were discussed. The incorporation of Cu-based nanoparticles improved the film properties with enhanced functional performance. Cu-based nanoparticles such as copper oxide, copper sulfide, copper ions, and copper alloys affect biopolymer-based films differently. The properties of composite films containing Cu-based nanoparticles depend on the concentration of the filler, the state of dispersion, and the interaction of the nanoparticles with the biopolymer matrix in the film. The composite film filled with Cu-based nanoparticles effectively extended the shelf life by maintaining the quality of various fresh foods and securing safety. However, studies on the migration characteristics and safety of copper-based nanoparticle food packaging films are currently being conducted on plastic-based films such as polyethylene, and research on bio-based films is limited.

Recent advances in metal sulfide nanoparticle-added bionanocomposite films for food packaging applications

Metal sulfide nanoparticles have recently attracted much attention due to their unique physical and functional properties. Metal sulfide nanoparticles used as optoelectronic and biomedical materials in the past decades are promising for making functional nanocomposite films due to their low toxicity and strong antibacterial activity. Recently, copper sulfide and zinc sulfide nanomaterials have been used to produce food packaging films for active packaging. Metal sulfide nanoparticles added as nanofillers are attracting attention in packaging applications due to their excellent potential to improve mechanical, barrier properties, and antibacterial activity. This review covers the fabrication process and important applications of metal sulfide nanoparticles. The development of metal sulfides reinforcing mainly copper sulfide and zinc sulfide nanomaterials as multifunctional nanofillers in bio-based films for active packaging applications has been comprehensively reviewed. As the recognition of metal sulfide nanoparticles as a functional filler increases, the development and application potential of active packaging films using them is expected to increase.

Sulfides mediate the migration of nanoparticle mass out of nanocomposite plastics and into aqueous environments

We show that inorganic sulfides strongly influence transfer (migration) of nanoparticle mass out of polymer nanocomposites (PNCs) and into aqueous environments. We first manufactured two families of PNCs: one incorporating silver nanoparticles (AgNPs) and one incorporating CdSe quantum dots (QDs). Then, we assessed migration out of these PNCs and into aqueous media containing Na₂S at concentrations ranging from 0 to 10^-4 M. Results show that Na₂S strongly suppressed migration of Ag from AgNP-based PNCs: the migration into water spiked with 10^-6 M Na₂S was 79% less than migration into water without Na₂S, and no migration was detected (LOD ≈ 0.01 ng/cm²) in water spiked with Na₂S at 10^-5 M or 10^-4 M. With CdSe QD-based PNCs, Na₂S suppressed Cd migration but enhanced Se migration, resulting in only a small net effect on the total QD migration but a large shift of the leachate composition (from favoring Cd by an average of 5.8 to 1 in pure water to favoring Se 9.4 to 1 when Na₂S was present at 10^-4 M). These results show that common inorganic substances like sulfides may play a strong role in determining the environmental fate of polymer-dispersed nanoparticles and imply that migration tests conducted in purified water may not always accurately reflect migration into real environments.

Gelatin-Based Film Integrated with Copper Sulfide Nanoparticles for Active Packaging Applications

Gelatin-based multifunctional composite films were prepared by reinforcing various amounts of copper sulfide nanoparticles (CuSNP, 0.0, 0.5, 1.0, and 2.0 wt %), and the effect of CuSNP on the film was evaluated by analyzing its physical and antibacterial properties. CuSNP makes a compatible film with gelatin. The inclusion of CuSNP significantly enhanced the UV blocking, mechanical strength, and water vapor barrier properties of the gelatin film. The inclusion of CuSNP of 1.0 wt % or less did not affect the transparency of the gelatin film. When 2.0 wt % of CuSNP was mixed, the hydrophilicity of the gelatin film did not change noticeably, but its thermal properties slightly increased. Moreover, the gelatin/CuSNP composite film presented effective antibacterial activity against E. coli and some activity against L. monocytogenes. Gelatin/CuSNP composite films with better functional and physical properties can be used for food packaging or biomedical applications.

Fabrication of Copper Sulfide Nanoparticles and Limonene Incorporated Pullulan/Carrageenan-Based Film with Improved Mechanical and Antibacterial Properties

Edible biopolymer (pullulan/carrageenan) based functional composite films were fabricated by the addition of copper sulfide nanoparticles (CuSNP) and D-limonene (DL). The DL and CuSNP were compatible with the pullulan/carrageenan biopolymer matrix. The addition of CuSNP significantly increased the UV-blocking properties without substantially reducing the transparency of the film. The addition of CuSNP improved the film's tensile strength by 10%; however, the DL addition did not significantly influence the strength, while the combined addition of CuSNP and DL increased the strength by 15%. The addition of the fillers did not significantly affect the thermal stability of the film, but the water vapor barrier property was slightly improved. There was no significant change in the moisture content and hydrophobicity of the composite film. Besides, the composite film showed some antimicrobial activity against food-borne pathogenic bacteria. The fabricated pullulan/carrageenan-based film with antimicrobial and UV-barrier properties is likely to be used in active food packaging applications.

Photo-transformation of graphene oxide in the presence of co-existing metal ions regulated its toxicity to freshwater algae

Graphene oxide (GO) sheets are unstable in aqueous environments, and the effect of photo-transformation on GO toxicity to freshwater algae (Chlorella pyrenoidosa) was investigated. Our results demonstrated that GO underwent photo-reduction under 25-day sunlight irradiation, and the transformation was generally completed at Day 8. The toxicological investigation showed that 8-day sunlight irradiation significantly increased growth inhibition of GO (25 mg/L) to algal cells by 11.2%, due to enhanced oxidative stress and stronger membrane damage. Low molecular weight (LMW) species were produced during the 8-day GO transformation, and they were identified as two types of aromatic compounds, which played a crucial role in increasing toxicity. The combined toxicity of GO and Cu²⁺ ions before and after light irradiation was further investigated. Antagonistic effect was observed between the toxicity of pristine GO and co-existing Cu²⁺ ions. After co-irradiation of GO and Cu²⁺ ions for 8 days, their combined toxicity was unexpectedly lower or insignificant in comparison with the treatments of pristine GO, or pristine GO in the presence of Cu²⁺ ions. Two mechanisms were revealed for this finding: (1) Cu²⁺ ions suppressed the photo-transformation of GO; (2) the toxicity of free Cu²⁺ ions was decreased through the adsorption/retention of Cu²⁺ ions and formation of Cu-based nanoparticles (e.g., Cu₂O and Cu₂S) on the photo-transformed GO. The provided data are helpful for better understanding the environmental process and risk of GO under natural conditions.

Dysbiosis of gut microbiota by dietary exposure of three graphene-family materials in zebrafish (Danio rerio)

The increasing application and subsequent mass production of graphene-family materials (GFMs) will lead to greater possibilities for their release into the environment. Although GFMs exhibit toxicity toward various aquatic organisms, little information is available on their influence on gut microbiota of aquatic organism. In this study, zebrafish were fed diets containing three GFMs, namely, monolayer graphene powder (GR), graphene oxide nanosheet (GO) and reduced graphene oxide powder (rGO), or appropriate control for 21 days. The gut bacterial communities were then characterized for comparison of the exposure effects of each GFM. Alterations of the intestinal morphology and oxidative stress indicators were also examined. The results showed GFMs led to different inflammatory responses and significantly altered the relative composition of the gut bacterial species by increasing the relative abundance of Fusobacteria and the genus Cetobacterium and Lactobacillus and decreasing the abundance of Firmicutes and the genus Pseudomonas; GR caused marked shifts in the diversity of the gut microbiota. The GFMs also altered the intestinal morphology and antioxidant enzyme activities by inducing more vacuolation and generating more goblet cells. Our findings demonstrate that GFM exposure poses potential health risks to aquatic organisms through alteration of the gut microbiota.

Remarkable Effect of Jacalin in Diminishing the Protein Corona Interference in the Antibacterial Activity of Pectin-Capped Copper Sulfide Nanoparticles

Herein, we report a new strategy based on jacalin functionalization to diminish the impact of biological fluids in the antibacterial applications of nanoparticles (NPs). Precoating pectin-capped copper sulfide NPs (pCuS) with bovine serum albumin produced a protein corona, which affects the antibacterial activity of pCuS. It was found that the minimum inhibitory concentration (MIC) increases fourfold because of the formation of the protein corona. Interestingly, the pCuS functionalized with jacalin enhance the targeting capabilities through bacterial cell surface glycan recognition with no interference from the protein corona. The MIC of pCuS decreases 16-fold on functionalization with jacalin. Mechanistic studies indicated that the pCuS functionalized with jacalin impede the protein corona interference and induce bacterial cell death by impairing the GSH/reactive oxygen species balance and disrupting the bacteria cell membrane. As a proof of concept, we used a bacteria-infected zebrafish animal model to demonstrate the interference of biological fluids in the antibacterial activity of NPs. Infected zebrafish treated with 1× MIC of pCuS failed to recover from the infection, but 4× MIC rescues the fish. The requirement of a high dose of NPs to treat the infection confirms the interference of biological fluids in nanotherapeutic applications. At the same time, the jacalin-pCuS complex rescues the infected fish at 16-fold lesser MIC. The results obtained from this study suggest that jacalin-mediated NP targeting may have broad implications in the development of future nanomedicine.

Biogenic phytochemicals (cassinopin and isoquercetin) capped copper nanoparticles (ISQ/CAS@CuNPs) inhibits MRSA biofilms

Purified glycosides, Isoquercetin and Cassinopin from Crotalaria candicans were selected for the synthesis of biogenic copper nanoparticles (CuNPs).The designed biogenic CuNPs was characterized and when evaluated against panel of gram negative and positive bacteria, the biogenic CuNPs were found to be more effective against methicillin resistant Staphylococcus aureus (MRSA). Antibacterial, anti-biofilm effects and time kill studies confirmed the ability of biogenic CuNPs to curtail MRSA. Scanning electron microscopy, Crystal violet staining and fluorescent live-dead imaging showed that treatment with sub lethal levels of glycoside capped CuNPs resulted in greater than 50% decline in biofilm formation by MRSA, which implies that anti-biofilm effect of biogenic CuNPs is not dependent on antibacterial effect. Alizarin red assay implied that prolonged treatment of biogenic CuNPs in presence of MRSA, releases Cu(II) ions and hence antibiofilm effect is primarily mediated by NP and is not due to released Cu(II) ion. The NPs caused altered membrane permeability and reduced surface hydrophobicity, thus accounting for its antibiofilm effect.

Development of multifunctional modified cotton fabric with tri-component nanoparticles of silver, copper and zinc oxide

A facile method, cost-effective and highly efficient with shortened-time operation was devised for unprecedented modification of cotton fabrics. This modification induced the formation of metallic and metal oxide nanoparticles within cotton fabrics in such a way that cotton samples loaded with AgNPs- or AgNPs/ZnONPs or AgNPs/ZnONPs/CuNPs respectively. Presence of the trimetallic nanoparticles concomitantly within microstructural features of cotton imparts durable antibacterial, UV protection and conductivity properties to yield ultimately cotton fabrics with multifunctional performance. The nanoparticles were formed and stabilized independently by Polymethylol compound (PMC) and functionalized polyethyleneimine (FPEI) as per one bath. The results obtained proved that the solution of these metal compounds are turned from colourless to yellow and black green colour up on addition of PMC or FPEI compound. It was found that UV-vis spectra display maximum surface plasmon peak of around 410-415 confirming the successful synthesis of AgNPs stabilized by PMC or FPEI chains. In addition, the results obtained indicated that the as formed nanoparticles are successfully deposited into the surface of cellulose fabrics and reveal changes in crystalline structure. Fabrics underwent structural changes during their treatments as per the designed practice exhibit multifunctional properties and manifold performance. The resultant treated cotton fabric gives good antibacterial properties event after 20 washing cycles additionally to the excellent ultra-violet properties and excellent electrical conductivity.

Jacalin capped platinum nanoparticles confer persistent immunity against multiple Aeromonas infection in zebrafish

Bacterial resistance is a major clinical problem, which is compounded by both a lack of new antibiotics and emergence of multi- and extremely-drug resistant microbes. In this context, non-toxic nanoparticles could play an important role in conferring protection against bacterial infections and in this study we have made an attempt to show the usefulness of jacalin capped platinum nanoparticles in protecting zebrafish against multiple infections with Aeromonas hydrophila. Our results also indicate that use of nanoparticles promotes adaptive immune response against the pathogen, so much so that zebrafish is able to survive repetitive infection even after twenty one days of being treated with jacalin-capped platinum nanoparticles. This is significant given that platinum salt is not antibacterial and jacalin is non-immunogenic. Our study for the first time reveals a novel mechanism of action of nanoparticles, which could form an alternate antibacterial strategy with minimal bacterial resistance.

Synthesis of copper sulfide nanoparticles and evaluation of in vitro antibacterial activity and in vivo therapeutic effect in bacteria-infected zebrafish

Copper sulfide nanoparticles rescue bacteria infected zebrafish.

Effect of surfactant in mitigating cadmium oxide nanoparticle toxicity: Implications for mitigating cadmium toxicity in environment

Cadmium (Cd), classified as human carcinogen, is an extremely toxic heavy metal pollutant, and there is an increasing environmental concern for cadmium exposure through anthropogenic sources including cigarette smoke. Though Cd based nanoparticles such as cadmium oxide (CdO) are being widely used in a variety of clinical and industrial applications, the toxicity of CdO nanoparticles has not been well characterized. Herein we report the toxicity of CdO nanoparticles employing zebrafish as a model. Two different CdO nanoparticles were prepared, calcination of Cd(OH)₂ without any organic molecule (CdO-1) and calcination of Cd-citrate coordination polymer (CdO-2), to evaluate and compare the toxicity of these two different CdO nanoparticles. Results show that zebrafish exposed to CdO-2 nanoparticles expressed reduced toxicity as judged by lower oxidative stress levels, rescue of liver carboxylesterases and reduction in metallothionein activity compared to CdO-1 nanoparticles. Histopathological observations also support our contention that CdO-1 nanoparticles showed higher toxicity relative to CdO-2 nanoparticles. The organic unit of Cd-citrate coordination polymer might have converted into carbon during calcination that might have covered the surface of CdO nanoparticles. This carbon surface coverage can control the release of Cd²⁺ ions in CdO-2 compared to non-covered CdO-1 nanoparticles and hence mitigate the toxicity in the case of CdO-2. This was supported by atomic absorption spectrophotometer analyses of Cd²⁺ ions release from CdO-1 and CdO-2 nanoparticles. Thus the present study clearly demonstrates the toxicity of CdO nanoparticles in an aquatic animal and also indicates that the toxicity could be substantially reduced by carbon coverage. This could have important implications in terms of anthropogenic release and environmental pollution caused by Cd and human exposure to Cd²⁺ from sources such as cigarette smoke.

Impacts of Pristine and Transformed Ag and Cu Engineered Nanomaterials on Surficial Sediment Microbial Communities Appear Short-Lived

Laboratory-based studies have shown that many soluble metal and metal oxide engineered nanomaterials (ENM) exert strong toxic effects on microorganisms. However, laboratory-based studies lack the complexity of natural systems and often use "as manufactured" ENMs rather than more environmentally relevant transformed ENMs, leaving open the question of whether natural ligands and seasonal variation will mitigate ENM impacts. Because ENMs will accumulate in subaquatic sediments, we examined the effects of pristine and transformed Ag and Cu ENMs on surficial sediment microbial communities in simulated freshwater wetlands. Five identical mesocosms were dosed through the water column with either Ag(0), Ag2S, CuO or CuS ENMs (nominal sizes of 4.67 ± 1.4, 18.1 ± 3.2, 31.1 ± 12, and 12.4 ± 4.1, respectively) or Cu(2+). Microbial communities were examined at 0, 7, 30, 90, 180, and 300 d using qPCR and high-throughput 16S rRNA gene sequencing. Results suggest differential short-term impacts of Ag(0) and Ag2S, similarities between CuO and CuS, and differences between Cu ENMs and Cu(2+). PICRUSt-predicted metagenomes displayed differential effects of Ag treatments on photosynthesis and of Cu treatments on methane metabolism. By 300 d, all metrics pointed to reconvergence of ENM-dosed mesocosm microbial community structure and composition, suggesting that the long-term microbial community impacts from a pulse of Ag or Cu ENMs are limited.

Platinum nanoparticles inhibit bacteria proliferation and rescue zebrafish from bacterial infection

Platinum nanoparticles rescue zebrafish from bacterial infection.