Experimental and molecular dynamics characterization of dense microemulsion systems: morphology, conductivity and SAXS

Dioctyl sodium sulfosuccinate surfactant self-assembly dependency of solvent hydrophilicity: a modelling study

The self-assembly of dioctyl sodium sulfosuccinate (AOT) model surfactant in solvent environments of differing polarity is examined by means of dissipative particle dynamics (DPD) bead model parametrized against Hildebrand solubility parameters from atomistic molecular dynamics (MD) simulations. The model predicts that in hydrophobic solvents (e.g. dodecane) the surfactant forms small (Nagg ∼ 8) reverse micellar aggregates, while in a solvent corresponding to water lamellar assembly takes place, in good agreement with literature structural parameters. Interestingly, solvents of intermediate polarity lead to formation of large, internally structured aggregates. In these, the surfactant headgroups cluster within the aggregate, surrounded by a continuous phase formed by the hydrocarbon tails. We show that the partitioning of the headgroups between the aggregate surface layer and the inner clustered phase depends primarily on solvent polarity, and can be controlled by the solvent, but also system composition. Finally, we compare the DPD assembly response to simplified effective interaction potentials derived at dilute concentration limit for the interactions. The comparison reveals that the simplified effective potential descriptions provide good level of insight on the assembly morphologies, despite drastic, isotropic interactions simplification involved.

Effect of ion structure on the physicochemical properties and gas absorption of surface active ionic liquids

Surface active ionic liquids (SAILs) combine useful characteristics of both ionic liquids (ILs) and surfactants, hence are promising candidates for a wide range of applications. However, the effect of SAIL ionic structures on their physicochemical properties remains unclear, which limits their uptake. To address this knowledge gap, in this work we investigated the density, viscosity, surface tension, and corresponding critical micelle concentration in water, as well as gas absorption of SAILs with a variety of cation and anion structures. SAILs containing anions with linear alkyl chains have smaller molar volumes than those with branched alkyl chains, because linear alkyl chains are interdigitated to a greater extent, leading to more compact packing. This interdigitation also results in SAILs being about two orders of magnitude more viscous than comparable conventional ILs. SAILs at the liquid-air interface orient alkyl chains towards the air, leading to low surface tensions closer to n-alkanes than conventional ILs. Critical temperatures of about 900 K could be estimated for all SAILs from their surface tensions. When dissolved in water, SAILs adsorb at the liquid-air interface and lower the surface tension, like conventional surfactants in water, after which micelles form. Molecular simulations show that the micelles are spherical and that lower critical micelle concentrations correspond to the formation of aggregates with a larger number of ion pairs. CO₂ and N₂ absorption capacities are examined and we conclude that ionic liquids with larger non-polar domains absorb larger quantities of both gases.

The effects of surfactant and oil chemical structures on self-assembly in apolar media

The thermodynamic and chemical structural aspects of surfactant self-assembly in aqueous systems have been much studied. On the other hand, for oil-water interfaces the effects of chemical structures of surfactants and solvents have received less attention. This review focuses on the surfactant chemical effects in low dielectric solvents, in particular formation and properties of surfactant films at oil-water interfaces. For this purpose, reversed micelles (RMs) and water-in-oil (W/O) microemulsions (μEs) serve as model systems, since electrostatic effects are minimized, allowing a focus on chain architecture of the surfactants and oil solvents themselves. It is noted that chemical structure can have profound effects on stability and self-assembly, suggesting a possibility of identifying unified chemical principles for designing and formulating systems across various thermodynamic conditions.

Computational and Experimental Models of Type III Lipid-Based Formulations of Loratadine Containing Complex Nonionic Surfactants

Type III lipid-based formulations (LBFs) combine poorly water-soluble drugs with oils, surfactants, and cosolvents to deliver the drugs into the systemic circulation. However, the solubility of the drug can be influenced by the colloidal phases formed in the gastrointestinal tract as the formulation is dispersed and makes contact with bile and other materials present within the GI tract. Thus, an understanding of the phase behavior of LBFs in the gut is critical for designing efficient LBFs. Molecular dynamics (MD) simulation is a powerful tool for the study of colloidal systems. In this study, we modeled the internal structures of five type III LBFs of loratadine containing poly(ethylene oxide) nonionic surfactants polysorbate 80 and polyoxyl hydrogenated castor oil (Kolliphor RH40) using long-timescale MD simulations (0.4-1.7 μs). We also conducted experimental investigations (dilution of formulations with water) including commercial Claritin liquid softgel capsules. The simulations show that LBFs form continuous phase, water-swollen reverse micelles, and bicontinuous and phase-separated systems at different dilutions, which correlate with the experimental observations. This study supports the use of MD simulation as a predictive tool to determine the fate of LBFs composed of medium-chain lipids, polyethylene oxide surfactants, and polymers.

Using Microemulsions: Formulation Based on Knowledge of Their Mesostructure

Microemulsions, as thermodynamically stable mixtures of oil, water, and surfactant, are known and have been studied for more than 70 years. However, even today there are still quite a number of unclear aspects, and more recent research work has modified and extended our picture. This review gives a short overview of how the understanding of microemulsions has developed, the current view on their properties and structural features, and in particular, how they are related to applications. We also discuss more recent developments regarding nonclassical microemulsions such as surfactant-free (ultraflexible) microemulsions or ones containing uncommon solvents or amphiphiles (like antagonistic salts). These new findings challenge to some extent our previous understanding of microemulsions, which therefore has to be extended to look at the different types of microemulsions in a unified way. In particular, the flexibility of the amphiphilic film is the key property to classify different microemulsion types and their properties in this review. Such a classification of microemulsions requires a thorough determination of their structural properties, and therefore, the experimental methods to determine microemulsion structure and dynamics are reviewed briefly, with a particular emphasis on recent developments in the field of direct imaging by means of electron microscopy. Based on this classification of microemulsions, we then discuss their applications, where the application demands have to be met by the properties of the microemulsion, which in turn are controlled by the flexibility of their amphiphilic interface. Another frequently important aspect for applications is the control of the rheological properties. Normally, microemulsions are low viscous and therefore enhancing viscosity has to be achieved by either having high concentrations (often not wished for) or additives, which do not significantly interfere with the microemulsion. Accordingly, this review gives a comprehensive account of the properties of microemulsions, including most recent developments and bringing them together from a united viewpoint, with an emphasis on how this affects the way of formulating microemulsions for a given application with desired properties.

Molecular Dynamics Simulation Insight into Interfacial Stability and Fluidity Properties of Microemulsions

Although the interfacial properties of microemulsions have been extensively studied in both experimental and simulation research studies, the molecular mechanisms of stability and fluidity about microemulsion are still poorly understood. Herein, we report a molecular dynamics simulation study to elaborate the motion of an emulsion droplet involving dichain surfactant Aerosol OT (AOT) and its dynamics evolution at the oil-water interface. By varying the concentrations of AOT, we show that the interfacial thickness and emulsification rate display a piecewise change as the interfacial coverage increases and the W/O emulsion is more stable than the O/W one while O/W emulsion presents better fluidity. In addition, the dispersed system combined with water/AOT/n-heptane tends to form a W/O microemulsion instead of an O/W microemulsion due to the structural collapse of the latter. This work provides a molecular understanding of microemulsion interfacial stability and fluidity.

Preparation and Application in Drug Storage and Delivery of Agarose Nanoparticles

In this work, monodisperse agarose gel nanoparticles were prepared using a W/O microemulsion as a template to control the size of the obtained particles. The combination of this template method with a temperature-induced gelling and a solvent exchange methodology has allowed preparing stable aqueous dispersions of monodisperse agarose gel nanoparticles in water. The average size, measured as an apparent hydrodynamic diameter, of the obtained particles was around 150 nm. The ability of the obtained hydrogel particles for the encapsulation and release of a synthetic insecticide (azamethiphos) was tested. The results evidence that the insecticide molecules encapsulated in the fabricated nanoparticles are released following a diffusion-controlled mechanism. These results combined with the biodegradability of the agarose provide the bases for the design of a new vector with application in the control of parasites in water reservoirs.

Reverse Micelles As Antioxidant Carriers: An Experimental and Molecular Dynamics Study

Water-in-oil microemulsions with biocompatible components were formulated to be used as carriers of natural antioxidants, such as hydroxytyrosol (HT) and gallic acid (GA). The system was composed of a mixture of natural surfactants, lecithin and monoglycerides, medium chain triglycerides, and aqueous phase. A dual approach was undertaken to study the structure and dynamics of these complicated systems. First, experimental data were collected by using adequate techniques, such as dynamic light scattering (DLS) and electron paramagnetic resonance (EPR) spectroscopy. Following this, a coarse-grained molecular dynamics (CGMD) study based on the experimental composition using the MARTINI force field was conducted. The simulations revealed the spontaneous formation of reverse micelles (RMs) starting from completely random initial conformations, underlying their enhanced thermodynamic stability. The location of the bioactive molecules, as well as the structure of the RM, were in accordance with the experimental findings. Furthermore, GA molecules were found to be located inside the water core, in contrast to the HT ones, which seem to lie at the surfactant interfacial layer. The difference in the antioxidants' molecular location was only revealed in detail from the computational analysis and explains the RM's swelling observed by GA in DLS measurements.

Phase inversion emulsification: Current understanding and applications

This review is addressed to the phase inversion process, which is not only a common, low-energy route to make stable emulsions for a variety of industrial products spanning from food to pharmaceuticals, but can also be an undesired effect in some applications, such as crude oil transportation in pipelines. Two main ways to induce phase inversion are described in the literature, i.e., phase inversion composition (PIC or catastrophic) and phase inversion temperature (PIT or transitional). In the former, starting from one phase (oil or water) with surfactants, the other phase is more or less gradually added until it reverts to the continuous phase. In PIT, phase inversion is driven by a temperature change without varying system composition. Given its industrial relevance and scientific challenge, phase inversion has been the subject of a number of papers in the literature, including extensive reviews. Due to the variety of applications and the complexity of the problem, most of the publications have been focused either on the phase behavior or the interfacial properties or the mixing process of the two phases. Although all these aspects are quite important in studying phase inversion and much progress has been done on this topic, a comprehensive picture is still lacking. In particular, the general mechanisms governing the inversion phenomenon have not been completely elucidated and quantitative predictions of the phase inversion point are limited to specific systems and experimental conditions. Here, we review the different approaches on phase inversion and highlight some related applications, including future and emerging perspectives.

Modeling the Self-Aggregation of Small AOT Reverse Micelles from First-Principles

This Letter is the first attempt at studying the self-aggregation of AOT reverse micelles from first-principles. It focuses on predicting the aggregation number, the radius of gyration, and the hydrodynamic radius of a low water content reverse micelle by theoretical means. We show that molecular dynamics simulation in the μs time range combined with atomistic potentials is capable of reproducing and explaining, to a convenient degree, experimental results on the size and dimensions of reverse micelles of AOT of low water content, [H2O]/[AOT] ≈ 5.