Design, synthesis, and evaluation of a carboxylesterase detection probe with therapeutic effects

In this study, a lysosomal targeting fluorescent probe recognition on CEs was designed and synthesized. The obtained probe BF2-cur-Mor demonstrated excellent selectivity, sensitivity, pH-independence, and enzyme affinity towards CEs within 5 min. BF2-cur-Mor could enable recognition of intracellular CEs and elucidate that the CEs content of different cancer cells follows the rule of HepG2 > HCT-116 > A549 > HeLa, and the CEs expression level of hepatoma cancer cells far exceeds that of normal hepatic cells, being in good agreement with the previous reports. The ability of BF2-cur-Mor to monitor CEs in vivo was confirmed by zebrafish experiment. BF2-cur-Mor exhibits some pharmacological activity in that it can induce apoptosis in hepatocellular carcinoma cells but is weaker in normal hepatocyte cells, being expected to be a potential "diagnostic and therapeutic integration" tool for the clinical diagnosis of CEs-related diseases.

Morpholine-modified polyacrylamides with Polymerization-Induced emission and its specific detection to Cu2+ ions

In this work, three morpholine-modified polyacrylamide derivatives (MMPAm) were successfully prepared by free radical polymerization of monomers with morpholine moiety. The intramolecular aggregation of morpholine rings on macromolecular backbone gives MMPAm a significant polymerization-induced emission (PIE). Particularly, poly(N-morpholine acrylamide) (PNMPA) has the characteristics of strong fluorescence at 450 nm, and its fluorescence quantum yield reaches 2.87 %. The introduction of morpholine moiety, the length of CH2 spacer between morpholine ring and the backbone and the molecular weight play the important roles in PIE properties of PNMPA. Interestingly, PNMPA can recognize and detect Cu2+ specifically even in the presence of 12 other metal ions by thorough fluorescence quenching, and the detection limit of PNMPA is 17.3 μM. Furthermore, the dynamic quenching of PNMPA by Cu2+ ions and the complexation ratio of 1:2 according to JOB's working diagram were confirmed by fluorescence titration. Under the assistance of EDTA, a reversible detection system for Cu2+ is achieved, and a portable test paper from PNMPA for the detection of Cu2+ was also made. In conclusion, PNMPA is endowed with a significant PIE effect by the intramolecular aggregation of morpholine rings along the backbone in the polymerization of non-fluorescent monomer, and is expected to be a promising material for specific detection to Cu2+ ions.

A very rare fluorescent chemosensor of zinc(II) exhibiting AIEE, ESIPT and TICT: Spectroscopic, crystallographic and theoretical exploration

The basic systems in this study are HL (1; 1:2 condensation product of 2,6-diformyl-4-ethylphenol and o-anisidine) and its ZnII and CdII complexes of composition [ZnII(LH)Cl2]·CH3OH (2) and [CdII(LH)Cl2] (3), all of which are synthesized and characterized by CHN elemental analyses, single crystal X-ray crystallography, powder X-ray diffraction (PXRD) and fourier transform infrared (FT-IR) spectrum. It has been established from the following experimental and theoretical studies that 1 is a fluorescent turn on sensor of ZnII ion and it exhibits all of excited state intramolecular proton transfer (ESIPT), photoinduced electron transfer (PET), twisted intramolecular charge transfer (TICT) and aggregation induced enhanced emission (AIEE): (i) Detailed absorption and emission (steady state / time resolved) studies in various single solvents, in solvent mixtures, with pH variation, with various single metal ions, with mixtures of metal ions, on varying temperature and on varying viscosity; (ii) dynamic light scattering (DLS) and scanning electron microscopy (SEM) in solvent mixtures; (iii) density functional theory (DFT) and time dependent density functional theory (TD-DFT) calculations in ground and excites states of 1-3. It is shown that 1 can be efficaciously applied in inkless writing with the "write - erase - write" facility. The mechanisms/reasons of the observed properties have been addressed. The difference in fluorescence of ZnII and CdII complexes, unusual case of crystal structures of probe and complexes with ZnII and CdII, unusual features in the structures of 2 and 3 as well as a structure-property correlation have been discussed.

A Holistic Perspective on Living Aggregate

Aggregate is one of the most extensive existing modes of matters in the world. Besides the research objectives of inanimate systems in physical science, the entities in life science can be regarded as living aggregates, which are far from being thoroughly understood despite the great advances in molecular biology. Molecular biology follows the research philosophy of reductionism, which generally reduces the whole into parts to study. Although reductionism benefits the understanding of molecular behaviors, it encounters limitations when extending to the aggregate level. Holism is another epistemology comparable to reductionism, which studies objectives at the aggregate level, emphasizing the interactions and synergetic/antagonistic effects of a group of composed single entities in determining the characteristics of a whole. As a representative of holism, aggregation-induced emission (AIE) materials have made great achievements in the past two decades in both physical and life science. In particular, the unique properties of AIE materials endow them with in situ and real-time visual methods to investigate the inconsistency between microscopic molecules and macroscopic substances, offering researchers excellent toolkits to study living aggregates. The applications of AIE materials in life science are still in their infancy and worth expanding. In this Perspective, we summarize the research progress of AIE materials in unveiling some phenomena and processes of living systems, aiming to provide a general research approach from the viewpoint of holism. At last, insights into what we can do in the near future are also raised and discussed.

Lysosome-targeted fluorescent probes: Design mechanism and biological applications

As an integral organelle in the eukaryote, the lysosome is the degradation center and metabolic signal center in living cells, and partakes in significant physiological processes such as autophagy, cell death and cellular senescence. Fluorescent probe has become a favorite tool for studying organelles and their chemical microenvironments because of its high specificity and non-destructive merits. Over recent years, it has been reported that increasingly new lysosome-targeted probes play a major role in the diagnosis and monitor of diseases, in particular cancer and neurodegenerative diseases. In order to deepen the relevant research on lysosome, it is challenging and inevitability to design novel lysosomal targeting probes. This review first introduces the concepts of lysosome and its closely related biological activities, and then introduces the fluorescent probes for lysosome in detail according to different detection targets, including targeting mechanism, biological imaging, and application in diseases. Finally, we summarize the specific challenges and discuss the future development direction facing the current lysosome-targeted fluorescent probes. We hope that this review can help biologists grasp the application of fluorescent probes and broaden the research ideas of researchers targeting fluorescent probes so as to design more accurate and functional probes for application in diseases.

New Advances in the Exploration of Esterases with PET and Fluorescent Probes

Esterases are hydrolases that catalyze the hydrolysis of esters into the corresponding acids and alcohols. The development of fluorescent probes for detecting esterases is of great importance due to their wide spectrum of biological and industrial applications. These probes can provide a rapid and sensitive method for detecting the presence and activity of esterases in various samples, including biological fluids, food products, and environmental samples. Fluorescent probes can also be used for monitoring the effects of drugs and environmental toxins on esterase activity, as well as to study the functions and mechanisms of these enzymes in several biological systems. Additionally, fluorescent probes can be designed to selectively target specific types of esterases, such as those found in pathogenic bacteria or cancer cells. In this review, we summarize the recent fluorescent probes described for the visualization of cell viability and some applications for in vivo imaging. On the other hand, positron emission tomography (PET) is a nuclear-based molecular imaging modality of great value for studying the activity of enzymes in vivo. We provide some examples of PET probes for imaging acetylcholinesterases and butyrylcholinesterases in the brain, which are valuable tools for diagnosing dementia and monitoring the effects of anticholinergic drugs on the central nervous system.

Advancements in Biosensors Based on the Assembles of Small Organic Molecules and Peptides

Over the past few decades, molecular self-assembly has witnessed tremendous progress in a variety of biosensing and biomedical applications. In particular, self-assembled nanostructures of small organic molecules and peptides with intriguing characteristics (e.g., structure tailoring, facile processability, and excellent biocompatibility) have shown outstanding potential in the development of various biosensors. In this review, we introduced the unique properties of self-assembled nanostructures with small organic molecules and peptides for biosensing applications. We first discussed the applications of such nanostructures in electrochemical biosensors as electrode supports for enzymes and cells and as signal labels with a large number of electroactive units for signal amplification. Secondly, the utilization of fluorescent nanomaterials by self-assembled dyes or peptides was introduced. Thereinto, typical examples based on target-responsive aggregation-induced emission and decomposition-induced fluorescent enhancement were discussed. Finally, the applications of self-assembled nanomaterials in the colorimetric assays were summarized. We also briefly addressed the challenges and future prospects of biosensors based on self-assembled nanostructures.

Polymerization-induced emission (PIE) of multifunctional polyamides synthesized by Ugi polymerization and targeted imaging of lysosomes

In this paper, a series of polyamide derivatives (PAMs) containing morpholine groups were prepared by Ugi polymerization from dialdehyde, diacid, N-(2-aminoethyl)-morpholine and isonitrile compounds as novel multi-responsive fluorescent sensors. As non-conjugated light-emitting polymers, PAMs were endowed with unique polymerization-induced emission (PIE) performance at 450 nm by through-space conjugation (TSC) between heteroatoms and heterocycles. It was also found that PAMs exhibited reversible responses to the external temperature and pH values and became responsive fluorescent switches. In addition, PAMs can specifically recognize Fe³⁺ with a limit of detection (LOD) of 54 nM and the introduction of EDTA reversibly restores the fluorescence of the quenched PAMs-Fe³⁺ system. By virtue of thermosensitivity, PAMs are easily separated from the above system by changing the temperature above or below the lower critical solution temperature (LCST). It is worth noting that PIE-active PAMs with good biocompatibility can selectively accumulate in lysosomes due to the presence of morpholine groups, and its Pearson colocalization coefficient is as higher as 0.91. Furthermore, a PIE-active PAM was successfully used to track exogenous Fe³⁺ in lysosomes. In conclusion, these multi-functional PIE-active PAMs have higher potential applications in biomedical or environmental fields.

A Turn-On Lipid Droplet-Targeted Near-Infrared Fluorescent Probe with a Large Stokes Shift for Detection of Intracellular Carboxylesterases and Cell Viability Imaging

Carboxylesterases (CEs) play important physiological roles in the human body and are involved in numerous cellular processes. Monitoring CEs activity has great potential for the rapid diagnosis of malignant tumors and multiple diseases. Herein, we developed a new phenazine-based "turn-on" fluorescent probe DBPpys by introducing 4-bromomethyl-phenyl acetate to DBPpy, which can selectively detect CEs with a low detection limit (9.38 × 10^-5 U/mL) and a large Stokes shift (more than 250 nm) in vitro. In addition, DBPpys can also be converted into DBPpy by carboxylesterase in HeLa cells and localized in lipid droplets (LDs), emitting bright near-infrared fluorescence under the irradiation of white light. Moreover, we achieved the detection of cell health status by measuring the intensity of NIR fluorescence after co-incubation of DBPpys with H₂O₂-pretreated HeLa cells, indicating that DBPpys has great potential applications for assessing CEs activity and cellular health.

Spatial Chemoproteomics for Mapping the Active Proteome

Functional regulation of cell signaling through dynamic changes in protein activity state as well as spatial organization represent two dynamic, complex, and conserved phenomena in biology. Seemingly separate areas of -omics method development have focused on building tools that can detect and quantify protein activity states, as well as map sub-cellular and intercellular protein organization. Integration of these efforts, through the development of chemical tools and platforms that enable detection and quantification of protein functional states with spatial resolution provide opportunities to better understand heterogeneity in the proteome within cell organelles, multi-cellular tissues, and whole organisms. This review provides an overview of and considerations for major classes of chemical proteomic probes and technologies that enable protein activity mapping from sub-cellular compartments to live animals.

Exploring Solvent Effects on the Proton Transfer Processes of Selected Benzoxazole Derivatives by Femtosecond Time-Resolved Fluorescence and Transient Absorption Spectroscopies

Excited-state intramolecular proton transfer (ESIPT) is of great importance due to the large Stokes shift emission that can be observed in some ESIPT molecules. Although steady-state spectroscopies have been employed to study the properties of some ESIPT molecules, their excited-state dynamics have not been examined directly with time-resolved spectroscopy methods yet for a number of systems. Here, an in-depth investigation of the solvent effects on the excited-state dynamics of two prototypical ESIPT molecules, 2-(2'-hydroxyphenyl)-benzoxazole (HBO) and 2-(2'-hydroxynaphthalenyl)-benzoxazole (NAP), have been accomplished by using femtosecond time-resolved fluorescence and transient absorption spectroscopies. Solvent effects affect the excited-state dynamics of HBO more significantly than that of NAP. Particularly in the presence of water, the photodynamics pathways of HBO are changed, while only small changes can be found in NAP. An ultrafast ESIPT process that occurs within our instrumental response is observed for HBO, and this is followed by an isomerization process in ACN solution. However, in aqueous solution, the obtained syn-keto* after ESIPT can be solvated by water in about 3.0 ps, and the isomerization process is totally inhibited for HBO. The mechanism of NAP is different from HBO and is determined to be a two-step excited-state proton transfer process. Upon photoexcitation, NAP is deprotonated first in the excited state to generate the anion*, which can transfer to the syn-keto* form followed by an isomerization process.

Fluorescent Organic Small Molecule Probes for Bioimaging and Detection Applications

The activity levels of key substances (metal ions, reactive oxygen species, reactive nitrogen, biological small molecules, etc.) in organisms are closely related to intracellular redox reactions, disease occurrence and treatment, as well as drug absorption and distribution. Fluorescence imaging technology provides a visual tool for medicine, showing great potential in the fields of molecular biology, cellular immunology and oncology. In recent years, organic fluorescent probes have attracted much attention in the bioanalytical field. Among various organic fluorescent probes, fluorescent organic small molecule probes (FOSMPs) have become a research hotspot due to their excellent physicochemical properties, such as good photostability, high spatial and temporal resolution, as well as excellent biocompatibility. FOSMPs have proved to be suitable for in vivo bioimaging and detection. On the basis of the introduction of several primary fluorescence mechanisms, the latest progress of FOSMPs in the applications of bioimaging and detection is comprehensively reviewed. Following this, the preparation and application of fluorescent organic nanoparticles (FONPs) that are designed with FOSMPs as fluorophores are overviewed. Additionally, the prospects of FOSMPs in bioimaging and detection are discussed.

Biosensors for the Detection of Enzymes Based on Aggregation-Induced Emission

Enzymes play a critical role in most complex biochemical processes. Some of them can be regarded as biomarkers for disease diagnosis. Taking advantage of aggregation-induced emission (AIE)-based biosensors, a series of fluorogens with AIE characteristics (AIEgens) have been designed and synthesized for the detection and imaging of enzymes. In this work, we summarized the advances in AIEgens-based probes and sensing platforms for the fluorescent detection of enzymes, including proteases, phosphatases, glycosidases, cholinesterases, telomerase and others. The AIEgens involve organic dyes and metal nanoclusters. This work provides valuable references for the design of novel AIE-based sensing platforms.

Proteasomal and autophagy-mediated degradation of mutp53 proteins through mitochondria-targeting aggregation-induced-emission materials

Close to half of human cancers harbor point mutations in the tumor-suppressor p53 gene, giving rise to the cellular accumulation of mutant p53 (mutp53) proteins with novel neomorphic gain-of-function (GOF) properties. The destruction of mutp53 proteins through either autophagic or proteasomal degradation is a viable strategy for the targeted therapy of p53-mutated cancers. Several nanomaterials, including zinc-iron and ZIF-8 nanoparticles (NPs), have been reported to induce the proteasomal degradation of mutp53 proteins. However, how autophagy, the other major cellular degradative pathway, influences NP-induced mutp53 degradation has not been investigated. This article shows that AIE-Mit-TPP, a mitochondria-targeting material with aggregation-induced emission (AIE) characteristics, elicits ubiquitination-dependent proteasomal degradation of a broad range of mutp53 proteins. Meanwhile, AIE-Mit-TPP also induces massive mitochondrial damage and autophagy. The inhibition of autophagy further increases AIE-Mit-TPP-elicited mutp53 degradation, revealing the negative impact of autophagy on AIE-Mit-TPP-induced mutp53 degradation. As expected, the degradation of mutp53 proteins by AIE-Mit-TPP abrogated mutp53-manifested GOF, leading to reductions in cell proliferation and migration and increases in cell cycle arrest and cell death. Consequently, AIE-Mit-TPP inhibited the growth of mutp53 tumors. This paper unravels the interesting interplay between the proteasomal and autophagic degradative pathways and pinpoints the modulation of autophagy as a potential strategy for optimizing NP-induced mutp53 degradation and p53-targeted cancer therapy. STATEMENT OF SIGNIFICANCE: We have designed three different types of AIE materials: non-targeting (AIE-Br), mitochondria-targeting (AIE-Mit-TPP), lysosome-targeting (AIE-Lyso). Our results proved that mitochondria-targeting AIE material induced degradation of mutp53 proteins via the proteasome degradation pathway and abrogated mutp53-conferred GOF phenotypes. Furthermore, we performed in vitro studies on the effect of the tested materials in mutp53-expressing cancer cells and demonstrated our findings via in vivo investigations in a mouse subcutaneous p53^R175H TOV112D ovarian cancer model. Our results confirmed the link between the proteasome pathway and autophagy and thus proposed a strategy of combining AIE-Mit-TPP with autophagy inhibitors for the targeted treatment of mutp53-associated tumors. Finally, we found that AIE-Mit-TPP could induce degradation of a wide-spectrum mutp53 proteins, which makes mitochondria-targeting AIE materials an effective therapeutic strategy for p53-mutated cancers.

Molecular to Supramolecular Self-Assembled Luminogens for Tracking the Intracellular Organelle Dynamics

Deciphering the dynamics of intracellular organelles has gained immense attention due to their subtle control over diverse, complex biological processes such as cellular metabolism, energy homeostasis, and autophagy. In this context, molecular materials, including small-organic fluorescent probes and their supramolecular self-assembled nano-/microarchitectures, have been employed to explore the diverse intracellular biological events. However, only a handful of fluorescent probes and self-assembled emissive structures have been successfully used to track different organelle's movements, circumventing the issues related to water solubility and long-term photostability. Thus, the water-soluble molecular fluorescent probes and the water-dispersible supramolecular self-assemblies have emerged as promising candidates to explore the trafficking of the organelles under diverse physiological conditions. In this review, we have delineated the recent progress of fluorescent probes and their supramolecular self-assemblies for the elucidation of the dynamics of diverse cellular organelles with a special emphasis on lysosomes, lipid droplets, and mitochondria. Recent advancement in fluorescence lifetime and super-resolution microscopy imaging has also been discussed to investigate the dynamics of organelles. In addition, the fabrication of the next-generation molecular to supramolecular self-assembled luminogens for probing the variation of microenvironments during the trafficking process has been outlined.

A photochromic salicylaldehyde hydrazone derivative based on CN isomerization and ESIPT mechanisms and its detection of Al3+ in aqueous solution

A simple photochromic Schiff base was successfully prepared by the condensation of salicylaldehyde and benzoyl hydrazine. This compound has reversible photochromic properties based on isomerization and ESIPT mechanisms. In organic solvents, after irradiation with 365 nm UV light for 2 min, the absorption peak at 367 nm of the compound showed a significant decrease, while a double absorption peak appeared at 418 nm and 438 nm, accompanied by a significant change of the solution color from colorless to yellow. The compound can also complex with Al³⁺ at the molar ratio of 2:1 in the water solution (acetonitrile/water, v/v, 1:99), resulting in significantly enhanced fluorescence of the compound, so as to achieve fluorescence detection of Al³⁺ in living cells and water samples.

NIR-Responsive Lysosomotropic Phototrigger: An "AIE + ESIPT" Active Naphthalene-Based Single-Component Photoresponsive Nanocarrier with Two-Photon Uncaging and Real-Time Monitoring Ability

In recent times, organelle-targeted drug delivery systems have gained tremendous attention due to the site-specific delivery of active drug molecules, resulting in enhanced bioefficacy. In this context, a phototriggered drug delivery system (DDS) for releasing an active molecule is superior, as it provides spatial and temporal control over the release. So far, a near-infrared (NIR) light-responsive organelle-targeted DDS has not yet been developed. Hence, we introduced a two-photon NIR light-responsive lysosome-targeted "AIE + ESIPT" active single-component DDS based on the naphthalene chromophore. The two-photon absorption cross section of our DDS is 142 GM at 850 nm. The DDS was converted into pure organic nanoparticles for biological applications. Our nano-DDS is capable of selective targeting, AIE luminogenic imaging, and drug release within the lysosome. In vitro studies using cancerous cell lines showed that our single-component photoresponsive nanocarrier exhibited enhanced cytotoxicity and real-time monitoring ability of drug release.

A historical review of aggregation‐induced emission from 2001 to 2020: A bibliometric analysis

Aggregation‐induced emission (AIE) is a photophysical phenomenon that a certain group of luminescent materials that become highly luminous when aggregated in a bad solvent or solid state. This year is the 20th anniversary since the AIE concept firstly proposed in 2001. Many advanced applications were gradually being explored, covering optics, electronics, energy, and bioscience and so on. At present, bibliometrics can enlighten the researchers with comprehensive sights of the achievements and trends of a specific field, which is critical for academic investigations. Herein, we presented a general bibliometric overview of AIE covering 20 years of evolution. With the assistance of Web of Science Core Collection database and several bibliometric software tools, the annual publication and citation, most influential countries/regions, most contributing authors, journals and institutions, second near‐infrared (NIR‐II) related hotspots, as well as the forecast of frontiers were demonstrated and systematically analyzed. This study summarizes the current research status in AIE research field and provides a reference for future research directions.

Design, Synthesis, and Evaluation of Probes for Spatially Resolved Imaging of Enantioselective Sulfoxide Reductases

A novel concept of nonhydrolytic enzyme sensing based on aggregation-induced emission is described. As a proof of principle, fluorogenic probes for methionine sulfoxide reductases have been developed. Changes in the polarity and electronic nature upon reduction of sulfoxide to sulfide are translated to the aggregation potential of the probe. The new probes enable sensitive and highly spatially resolved imaging of the enzymatic activity.

When AIE meets enzymes

Applications of AIEgens in biosensing, disease diagnosis, and drug release.

Progress and Perspective of Solid-State Organic Fluorophores for Biomedical Applications

Fluorescent organic dyes have been extensively used as raw materials for the development of versatile imaging tools in the field of biomedicine. Particularly, the development of solid-state organic fluorophores (SSOFs) in the past 20 years has exhibited an upward trend. In recent years, studies on SSOFs have focused on the development of advanced tools, such as optical contrast agents and phototherapy agents, for biomedical applications. However, the practical application of these tools has been hindered owing to several limitations. Thus, in this Perspective, we have provided insights that could aid researchers to further develop these tools and overcome the limitations such as limited aqueous dispersibility, low biocompatibility, and uncontrolled emission. First, we described the inherent photophysical properties and fluorescence mechanisms of conventional, aggregation-induced emissive, and precipitating SSOFs with respect to their biomedical applications. Subsequently, we highlighted the recent development of functionalized SSOFs for bioimaging, biosensing, and theranostics. Finally, we elucidated the potential prospects and limitations of current SSOF-based tools associated with biomedical applications.

Ultrasensitive fluorescent probe for visual biosensing of esterase activity in living cells and its imaging application

Esterase activity is often used as an index to evaluate the health status of cells and plays an important role in cell metabolism and apoptosis. Herein, we develop two fluorescent probes for visual biosensing of esterase activity and imaging in living cells. In vitro, after the introduction of esterase, enzymolysis destroys the ester bond of the probe, causing the fluorescent color of probe changes from yellow to red, thus realizing the visual strategy for determination of esterase activity, with high sensitivity and selectivity. Especially, probe VA, 2-(4-acetoxystyryl)-3-ethyl-1,1-dimethyl- 1H-benzo[e]indol-3-ium, exhibits higher sensitivity with a lower detection limit (up to 7.15 × 10^-6 U/mL). In the cell experiment, the fluorescent probe VA also shows good biocompatibility and high spatial resolution, and is successfully applied to the intracellular fluorescent imaging and biosensing of esterase in living cells. More importantly, the probe VA can judge the unhealthy state of H₂O₂-induced HeLa cells using dual-fluorescence signals. The results confirm that the fluorescence method is a reliable tool for detecting endogenous esterase in living biological system.

Photoactivatable Biomedical Materials Based on Luminogens with Aggregation-Induced Emission (AIE) Characteristics

Fluorescence probes with aggregation-induced emission (AIE) property are fascinating and vital in biological fields due to their bright fluorescence in the solid state. In contrast, traditional AIE materials are obscured by the off-target effects and lack of spatial and temporal control. Photoactivatable materials with AIE characteristics, whose physicochemical behaviors can be remotely activated by light, provide great potential in biochemical information acquisition with high spatial and temporal resolution. By using AIE-featured photoactivatable fluorescence probes, accurate analysis of the targets of interest is possible. For example, where, when, and to what extent a process is started or stopped by manipulating the non-invasive light accurately. Thus, many researchers are enthusiastic about developing AIE-featured photoactivatable materials and mainly focus on developing novel molecules by rational molecular structure design, and exploring advanced applications by appropriate molecular functionalization. In this review, the recent achievements of photoactivatable materials with AIE characteristics from the aspects involving inherent mechanism of photoactivity, molecular design strategy, and the corresponding applications in biological fields, are summarized. The biological applications are highlighted and discussed, including photoactivatable bioimaging, diagnosis, and photo-controlled therapy. Finally, the challenges and prospects of the AIE-featured photoactivatable materials are also outlined and discussed.

Practicable Applications of Aggregation-Induced Emission with Biomedical Perspective

Considerable efforts have been made into developing aggregation-induced emission fluorogens (AIEgens)-containing nano-therapeutic systems due to the excellent properties of AIEgens. Compared to other fluorescent molecules, AIEgens have advantages including low background, high signal-to-noise ratio, good sensitivity, and resistance to photobleaching, in addition to being exempt from concentration quenching or aggregation-caused quenching effects. The present review outlines the major developments in the biomedical applications of AIEgens-containing systems. From a literature survey, the recent AIE works are reviewed and the reasons why AIEgens are chosen in various biomedical applications are highlighted. The research activities on AIEgens-containing systems are increasing rapidly, therefore, the present review is timely.

An ESIPT-Dependent AIE Fluorophore Based on HBT Derivative: Substituent Positional Impact on Aggregated Luminescence and its Application for Hydrogen Peroxide Detection

Aiming to develop the facile organic fluorophore possessing excited state intramolecular proton transfer (ESIPT) and aggregation-induced emission (AIE), we designed and synthesized two isomers with different linkage site between hydroxyl of 2-(2-hydroxyphenyl) benzothiazole (HBT) and a benzothiazole substituent (para position refers to p-BHBT and ortho position refers to o-BHBT). Fluorescence emission properties of p-BHBT and o-BHBT in THF/water mixtures with different water volume fractions indicated an opposite luminescence in aggregates, in which p-BHBT showed an ESIPT-dependent AIE properties while o-BHBT displayed ESIPT effect and aggregation-caused quenching (ACQ) qualities. A possible mechanism for molecular actions to illustrate the aggregating luminescence alteration of these two isomers had been proposed and verified by theoretical and experimental studies. More importantly, Probe-1, generated from dual ESIPT-AIE fluorophore p-BHBT, was successfully used as a ratiometric fluorescent chemosensor for highly selective (above 15-fold over other ROS) and sensitive (69-fold fluorescence enhancement with 0.22 μM of detection limit) detection of hydrogen peroxide in aqueous solution and living cells, respectively.

Aggregation-induced emission spectra of triphenylamine salicylaldehyde derivatives via excited-state intramolecular proton transfer revealed by molecular spectral and dynamics simulations

Aggregation-induced emission (AIE) spectra accompanied by excited state intramolecular proton transfer (ESIPT) for two triphenylamine salicylaldehyde derivatives (namely, TS and TS-OMe) are investigated by performing molecular spectral and dynamics simulations associated with the hybrid quantum mechanics/molecular mechanics (QM/MM) at the quantum level of the time-dependent density functional theory. The simulated emission spectral peaks and Stokes' shifts are in good agreement with the experimental results for both TS and TS-OMe. Furthermore, the AIE spectral mechanisms are well explained to be associated with the ESIPT processes for both TS and TS-OMe monomers in the aggregated crystal state, while the AIE spectra mechanism for the TS-OMe (TS) dimer is accompanied by intermolecular charge-transfer excitation process. Besides, the TS dimers also contributed to the AIE mechanisms in the crystal with the intermolecular charge-transfer from one monomer to another. In addition, the TS dimers are contributed to the AIE mechanisms in the crystal with the intermolecular charge-transfer from one monomer to another. On the other hand, simulated emission spectra for both the TS and TS-OMe monomers in acetonitrile solution are involved in mixed emission with and without the ESIPT process, as interpreted by nonadiabatic molecular dynamics simulation. It is also briefly addressed that the emission spectra in the solution are weak and enhanced in the crystal. The present study provides a great physical insight into the design of highly efficient AIE compounds.

AIE materials for lysosome imaging

The aggregation-induced emission (AIE) active bioprobes are known for their high photostability and extraordinary signal to noise ratio. In view of this, research efforts to synthesize new AIE bioimaging probes are at an incredible speed. In this chapter, we have summarized the various lysosome specific AIE active "turn-on" bioprobes having applications in lysosome imaging, monitoring of lysosome bioactivity and evaluation of their therapeutic effects. By discussing their design and operational mechanisms, we hope to provide more insight into designing new AIE bioprobes for specific sensing and imaging of lysosome having flexibility for broad range of biomedical applications.

Innovative strategies for enhanced tumor photodynamic therapy

Photodynamic therapy (PDT) is an approved and promising treatment approach that utilizes a photosensitizer (PS) to produce cytotoxic reactive oxygen species (ROS) through irradiation to achieve tumor noninvasive therapy. However, the limited singlet oxygen generation, the nonspecific uptake of PS in normal cells, and tumor hypoxia have become major challenges in conventional PDT, impeding its development and further clinical application. This review summarizes an overview of recent advances for the enhanced PDT. The development of PDT with innovative strategies, including molecular engineering and heavy atom-free photosensitizers is presented and future directions in this promising field are also provided. This review aims to highlight the recent advances in PDT and discuss the potential strategies that show promise in overcoming the challenges of PDT.

Human carboxylesterases and fluorescent probes to image their activity in live cells

Human carboxylesterases (CESs) are serine hydrolases that are responsible for the phase I metabolism of an assortment of ester, amide, thioester, carbonate, and carbamate containing drugs. CES activity is known to be influenced by a variety of factors including single nucleotide polymorphisms, alternative splicing, and drug-drug interactions. These different factors contribute to interindividual variability of CES activity which has been demonstrated to influence clinical outcomes among people treated with CES-substrate therapeutics. Detailed exploration of the factors that influence CES activity is emerging as an important area of research. The use of fluorescent probes with live cell imaging techniques can selectively visualize the real-time activity of CESs and have the potential to be useful tools to help reveal the impacts of CES activity variations on human health. This review summarizes the properties of the five known human CESs including factors reported to or that could potentially influence their activity before discussing the design aspects and use considerations of CES fluorescent probes in general in addition to highlighting several well-characterized probes.

An activity-based fluorescent probe and its application for differentiating alkaline phosphatase activity in different cell lines

Herein, a new fluorescent probe, AE-Phos, is reported for detecting the ALP activity with the combined advantages of aggregation-induced emission (AIE) and excited state intramolecular proton transfer (ESIPT). Further detailed fluorescence experiments demonstrated that AE-Phos exhibited excellent selectivity and sensitivity, a large Stokes shift, and a fast response towards ALP. Furthermore, AE-Phos was applied to imaging the ALP activity in different cell lines quantitatively.

A lysosome-targeted fluorescent probe for the specific detection and imaging of formaldehyde in living cells

We presented herien the rational design, synthesis, and photophysical property studies of the lysosome-targeted fluorescence FA probe NP-Lyso, an isopropyl group modified ortho-diaminonaphthalimide derivative. After the reaction of FA and ortho-phenylenediamine modified with the isopropyl group in NP-Lyso, the probe exhibited favorable features such as a large fluorescence enhancement, specific selectivity and high sensitivity for the detection of FA. More importantly, NP-Lyso could be used to detect and image endogenous FA in lysosomes. In light of these prominent properties, we envision that NP-Lyso will be an efficient optical imaging approach for investigating the biofunctions of FA in living systems.

Theoretical study on the sensing mechanism of chalcone-based fluorescence probe for detecting hydrogen sulfide and biothiols

The single fluorescence phenomenon of Comp2 experimentally is explained by the Boltzmann distribution. Pr1 has three distorted dihedral angles under photo-excitation.

A specific aggregation-induced emission-conjugated polymer enables visual monitoring of osteogenic differentiation

Osteogenic differentiation is the basis of bone growth and repair related to many diseases, in which evaluating the degree and ability of osteogenic transformation is quite important and highly desirable. However, fixing or stopping the growth of cells is required for conventional methods to monitor osteogenic differentiation, which cannot realize the full investigation of the dynamic process. Herein, a new anion conjugated polymer featuring aggregation-induced emission (AIE) characteristics is developed with excellent solubility for in-situ monitoring the process of osteogenic differentiation. This novel polymer can bind with osteogenic differentiated cells, and the intracellular fluorescence increases gradually with the enhancement of osteogenic differentiation. Moreover, it possesses good biosafety with negligible effect on cell activity and osteogenic differentiation, which cannot be realized by the typical method of Alizarin Red S staining. Further study shows that the polymer crosses the cell membrane through endocytosis and enriches in lysosomes, whereas no obvious fluorescence is detected with other cells, including non-differentiated osteoblast cells, under the same conditions, demonstrating the high selectivity. This is the first fluorescent probe with excellent specificity to realize real-time observation of the process of osteogenic differentiation. Therefore, PTB-EDTA shows great promise in the study of osteogenic differentiation and related applications.

A sensitive and rapid "off-on" fluorescent probe for the detection of esterase and its application in evaluating cell status and discrimination of living cells and dead cells

The discrimination of living and dead cells shows great importance in the development of biology, pathology, medicine, and pharmacology research. Herein, we synthesized a simple benzothiazole-based probe, EP, which was characterized via1H NMR (hydrogen nuclear magnetic resonance) spectroscopy, 13C NMR (carbon nuclear magnetic resonance) spectroscopy and HRMS (high-resolution mass spectroscopy). The fluorescence changes in response to esterase were characterized via fluorescence spectroscopy. EP exhibited a 70-fold fluorescence enhancement in the presence of esterase and possessed a very low limit of detection (4.73 × 10-5 U mL-1). EP also showed high selectivity to esterase compared to other biological species. Bright fluorescence appeared in living cells, which was activated by esterase when incubated with EP. In paraformaldehyde or H2O2 pretreated cells, the fluorescence became very weak since esterase became inactive in these cells. In summary, the EP probe can monitor esterase activity both in vitro and in living cells and can be used to evaluate the health status of cells and discriminate living and dead cells effectively.

An enzyme-triggered turn-on fluorescent probe based on carboxylate-induced detachment of a fluorescence quencher

We developed a new class of turn-on fluorescent probes for an esterase. After the esterase-mediated hydrolysis produced carboxylate (as a fluorescence activator), the fluorescence intensity was markedly increased through the detachment of a quencher moiety from the quenched Cy5 fluorophore. Because the probes based on this new activator-induced quencher-detachment (AiQd) adopt a non-immolative linker between the cleavable site and the fluorophore, the rate of the enzymatic reaction is greatly improved, without the generation of any by-products.

Multifunctional Near-Infrared Fluorescent Probes with Different Ring-Structure Trigger Groups for Cell Health Monitoring and In Vivo Esterase Activity Detection

A series of multifunctional ratiometric near-infrared fluorescent probes (CYOH-3, CYOH-4, CYOH-5, and CYOH-6) for esterase detection are designed by gradually changing the deflection of the plane twist in the molecule. These probes are composed of different ring-structure trigger groups (from three-membered ring to six-membered ring) and the same luminescent group CYOH. These probes show maximum absorption at ∼585 nm and a fluorescence emission peak at ∼655 ± 5 nm. In the presence of esterase, the probes were hydrolyzed to expose the fluorophore CYOH (λ_abs = 690 nm, λ_em = 710 ± 5 nm), thus exhibiting ratiometric near-infrared fluorescence. The probe CYOH-6 has lower plane deflection angle and better ratiometric (R = I_710±5nm/I_657±4nm) fluorescence properties than probes CYOH-3, CYOH-4, and CYOH-5. CYOH-6 (six-membered ring) has been successfully used to target esterase in mitochondria and distinguish between dead cells (esterase inactivation) and live cells. In addition, CYOH-6 has been well used for monitoring of esterase activity in zebrafish and mice, which proves that these probes have good prospects for clinical biomedical applications.

Tetrazine as a general phototrigger to turn on fluorophores

Light-activated fluorescence affords a powerful tool for monitoring subcellular structures and dynamics with enhanced temporal and spatial control of the fluorescence signal. Here, we demonstrate a general and straightforward strategy for using a tetrazine phototrigger to design photoactivatable fluorophores that emit across the visible spectrum. Tetrazine is known to efficiently quench the fluorescence of various fluorophores via a mechanism referred to as through-bond energy transfer. Upon light irradiation, restricted tetrazine moieties undergo a photolysis reaction that generates two nitriles and molecular nitrogen, thus restoring the fluorescence of fluorophores. Significantly, we find that this strategy can be successfully translated and generalized to a wide range of fluorophore scaffolds. Based on these results, we have used this mechanism to design photoactivatable fluorophores targeting cellular organelles and proteins. Compared to widely used phototriggers (e.g., o-nitrobenzyl and nitrophenethyl groups), this study affords a new photoactivation mechanism, in which the quencher is photodecomposed to restore the fluorescence upon light irradiation. Because of the exclusive use of tetrazine as a photoquencher in the design of fluorogenic probes, we anticipate that our current study will significantly facilitate the development of novel photoactivatable fluorophores.