Biomimetic promotion of dentin remineralization usingl-glutamic acid: inspiration from biomineralization proteins

Application of a calcium and phosphorus biomineralization strategy in tooth repair: a systematic review

Biomineralization is a natural process in which organisms regulate the growth of inorganic minerals to form biominerals with unique layered structures, such as bones and teeth, primarily composed of calcium and phosphorus. Tooth decay significantly impacts our daily lives, and the key to tooth regeneration lies in restoring teeth through biomimetic approaches, utilizing mineralization strategies or materials that mimic natural processes. This review delves into the types, properties, and transformations of calcium and phosphorus minerals, followed by an exploration of the mechanisms behind physiological and pathological mineralization in living organisms. It summarizes the mechanisms and commonalities of biomineralization and discusses the advancements in dental biomineralization research, guided by insights into calcium and phosphorus mineral biomineralization. This review concludes by addressing the current challenges and future directions in the field of dental biomimetic mineralization.

Advancing dentin remineralization: Exploring amorphous calcium phosphate and its stabilizers in biomimetic approaches

OBJECTIVE

This review elucidates the mechanisms underpinning intrafibrillar mineralization, examines various amorphous calcium phosphate (ACP) stabilizers employed in dentin's intrafibrillar mineralization, and addresses the challenges encountered in clinical applications of ACP-based bioactive materials.

METHODS

The literature search for this review was conducted using three electronic databases: PubMed, Web of Science, and Google Scholar, with specific keywords. Articles were selected based on inclusion and exclusion criteria, allowing for a detailed examination and summary of current research on dentin remineralization facilitated by ACP under the influence of various types of stabilizers.

RESULTS

This review underscores the latest advancements in the role of ACP in promoting dentin remineralization, particularly intrafibrillar mineralization, under the regulation of various stabilizers. These stabilizers predominantly comprise non-collagenous proteins, their analogs, and polymers. Despite the diversity of stabilizers, the mechanisms they employ to enhance intrafibrillar remineralization are found to be interrelated, indicating multiple driving forces behind this process. However, challenges remain in effectively designing clinically viable products using stabilized ACP and maximizing intrafibrillar mineralization with limited materials in practical applications.

SIGNIFICANCE

The role of ACP in remineralization has gained significant attention in dental research, with substantial progress made in the study of dentin biomimetic mineralization. Given ACP's instability without additives, the presence of ACP stabilizers is crucial for achieving in vitro intrafibrillar mineralization. However, there is a lack of comprehensive and exhaustive reviews on ACP bioactive materials under the regulation of stabilizers. A detailed summary of these stabilizers is also instrumental in better understanding the complex process of intrafibrillar mineralization. Compared to traditional remineralization methods, bioactive materials capable of regulating ACP stability and controlling release demonstrate immense potential in enhancing clinical treatment standards.

Phosphorylation of collagen fibrils enhances intrafibrillar mineralization and dentin remineralization

The hierarchical assembly of nanoapatite within a type I collagen matrix was achieved through biomimetic mineralization in vitro, cooperatively regulated by non-collagenous proteins and small biomolecules. Here, we demonstrated that IP6 could significantly promote intrafibrillar mineralization in two- and three-dimensional collagen models through binding to collagen fibrils via hydrogen bonds (the interaction energy ∼10.21 kJ mol-1), as confirmed by the FTIR spectra and isothermal experimental results. In addition, we find that IP6 associated with dental collagen fibrils can also enhance the remineralization of calcium-depleted dentin and restore its mechanical properties similar to the natural dentin within 4 days. The promoting effect is mainly due to the chemical modification of IP6, which alters the interfacial physicochemical properties of collagen fibrils, strengthening the interaction of calcium phosphate minerals and mineral ions with collagen fibrils. This strategy of interfacial regulation to accelerate the mineralization of collagen fibrils is essential for dental repair and the development of a clinical product for the remineralization of hard tissue.

Hyaluronic acid-mediated collagen intrafibrillar mineralization and enhancement of dentin remineralization

Non-collagenous proteins (NCPs) in the extracellular matrix (ECM) of bone and dentin are known to play a critical regulatory role in the induction of collagen fibril mineralization and are embedded in hyaluronic acid (HA), which acts as a water-retaining glycosaminoglycan and provides necessary biochemical and biomechanical cues. Our previous study demonstrated that HA could regulate the mineralization degree and mechanical properties of collagen fibrils, yet its kinetics dynamic mechanism on mineralization is under debate. Here, we further investigated the role of HA on collagen fibril mineralization and the possible mechanism. The HA modification can significantly promote intrafibrillar collagen mineralization by reducing the electronegativity of the collagen surface to enhance calcium ions (Ca2+) binding capacity to create a local higher supersaturation. In addition, the HA also provides additional nucleation sites and shortens the induction time of amorphous calcium phosphate (ACP)-mediated hydroxyapatite (HAP) crystallization, which benefits mineralization. The acceleration effect of HA on intrafibrillar collagen mineralization is also confirmed in collagen hydrogel and in vitro dentin remineralization. These findings offer a physicochemical view of the regulation effect of carbohydrate polymers in the body on biomineralization, the fine prospect for an ideal biomaterial to repair collagen-mineralized tissues.

Remineralization of Dentinal Lesions Using Biomimetic Agents: A Systematic Review and Meta-Analysis

The objective of this article was to systematically provide an up-to-date review on the different methods of remineralizing human dentine using different biomimetic agents. The authors performed a systematic search within PubMed, Scopus, and Web of Science in addition to the grey literature in Google Scholar^® using MeSH terms. The PICO question was P: human teeth dentinal sections; I: application of biomimetic remineralizing agents; C: other non-biomimetic approaches; O: extent of remineralization and physical properties of remineralized dentine. The initially identified studies were screened for titles and abstracts. Non-English articles, reviews, animal studies, studies involving the resin-dentine interface, and other irrelevant articles were then excluded. The other remaining full-text articles were retrieved. Bibliographies of the remaining articles were searched for relevant studies that could be included. A total of 4741 articles were found, and finally, 39 full-text articles were incorporated in the current systematic review. From these, twenty-six research studies used non-collagenous protein (NCP) analogs to biomineralize dentine, six studies used bioactive materials derived from natural sources, six studies used zinc hydroxyapatite, and one study used amelogenin peptide to induce hydroxyapatite formation on the surface of demineralized dentine. Additive effects of triclosan and epigenin were assessed when combined with commonly available NCPs. Overall, a moderate risk of bias was observed and, hence, the findings of the included studies could be acceptable. A meta-analysis of some similar studies was performed to assess the depth of remineralization and elastic modulus. Despite having high heterogeneity (I² > 90), all the studies showed a significant improvement in biomimetic remineralization efficacy as compared to the control. All the included studies carried out a functional remineralization assessment and found a 90-98% efficacy in the extent of remineralization while the elastic modulus reached 88.78 ± 8.35 GPa, which is close to natural dentine. It is pertinent to note the limitations of these studies that have been carried out in vitro under controlled settings, which lack the effects of a natural oral environment. To conclude, the authors suggest that the biomimetic remineralization of dentine using NCP analogs, bioactive materials, and natural products carries significant potential in treating dentinal lesions; however, more long-term studies are needed to assess their clinical applications in vivo.

Evaluation of different remineralization agents in the treatment of natural caries-affected dentin in permanent teeth

BACKGROUND

In the preventive treatment protocol, providing remineralization of the tissue in demineralized dentin caries is an important step.

OBJECTIVE

In this in vitro study, the effectiveness of remineralization agents in natural caries-affected dentin (NCAD) were investigated.

METHODS

Forty caries slices were prepared from permanent molar dentin with International Caries Detection and Assessment System (ICDAS 2) (Code 3). The interventions with 8 days pH cycling were as follows: Deionized water (DW); 5% Sodium Fluoride (5% NaF) Varnish; Casein Phosphopeptide-Amorphous Calcium Fluoride Phosphate (CPP-ACFP); Calcium Glyserophosphate (CaGP) + Magnesium (Mg) + Xylitol. DIAGNOdent (Laser Fluorescence, LF), Surface Microhardness (SMH), and X-ray Fluorescence (XRF) Spectroscopy measurements were calculated before and after pH cycling.

RESULTS

LF values decreased between 5% NaF, CCP-ACFP and CaGP. NCAD treated with 5% NaF, CaGP and CCP-ACFP exhibited statistically higher hardness compared to the control group. After 5% NaF application, SMH values were significantly higher than the others. There was no statistically significant difference between baseline and after pH cycling hardness of the control group. After cycling, XRF showed that Ca and P concentrations were increased in all groups.

CONCLUSION

The application of agents used in the study could be recommended and promoted as a treatment option of caries dentin for conventional management of caries.

Promotion of collagen mineralization and dentin repair by succinates

Biomineralization of collagen fibers is regulated by non-collagenous proteins and small biomolecules, which are essential in bone and teeth formation. In particular, small biomolecules such as succinic acid (SA) exist at a high level in hard tissues, but their role is yet unclear. Here, our work demonstrated that SA could significantly promote intrafibrillar mineralization in two- and three-dimensional collagen models, where the relative mineralization rate was 16 times faster than the control group. Furthermore, the FTIR spectra and isothermal experimental results showed that collagen molecules could interact with SA via a hydrogen bond and that the interaction energy was about 4.35 kJ mol^-1. As expected, the SA-pretreated demineralized dentin obtained full remineralization within two days, whereas it took more than four days in the control group, and their mechanical properties were considerably enhanced compared with those of the demineralized one. The possible mechanism of the promotion effect of SA was ultimately illustrated, with SA modification strengthening the capacity of the collagen matrix to attract more calcium ions, which might create a higher local concentration that could accelerate the mineralization of collagen fibers. These findings not only advance the understanding of the vital role of small biomolecules in collagen biomineralization but also facilitate the development of an effective strategy to repair hard tissues.

Impact of dentin conditioning and sealer modification with chitosan-hydroxyapatite nanocomplexes on the antibacterial and mechanical characteristics of root dentin

INTRODUCTION

This study aimed to characterize the effectiveness of dentin-conditioning with bio-mineralizable chitosan-hydroxyapatite precursor (CS-HA) nanocomplexes alone or associated with tricalcium silicate sealer (TCS/CS-HA) on the mechanical property and antibiofilm efficacy in root dentin.

METHODS

Flow tests were performed following ISO6876:2012-specifications. Solubility was measured. Micromorphology was assessed using Scanning Electron Microscopy (SEM). Nanohardness/elastic modulus were also determined. Fracture resistance was determined on lower premolars that were prepared, and randomly distributed among 7-groups (n=8/group), including the control, CS-HA dentin-conditioning and root canal filled groups. Similar canal preparation/distribution procedure was followed to test the antibacterial effect on Enterococcus faecalis-infected roots. Descriptive statistic was used to report SEM findings. Flowability results were analyzed using Paired t-test. Multiple comparisons from solubility, fracture and antibacterial assays were assessed by one-way ANOVA-Tukey's tests.

RESULTS

TCS/CS-HA showed optimal flow and no effect on solubility after immersion for 4 weeks (p>.05). TCS/CS-HA significantly increased nanohardness and elastic modulus (210±11.3MPa, 7.9±0.9GPa) compared to TCS (44.5±7.8MPa, 2.1±0.3GPa,p<.05). SEM revealed needle-shaped mineralized structures resulting in fewer voids and a well-adapted sealer-dentin interface in the TCS/CS-HA groups. NaOCl-EDTA irrigation resulted in reduced fracture resistance (444.34N) while CS-HA dentin-conditioning alone (928.28N, p<.05) and CS-HA dentin-conditioning plus CS-HA/TCS resulted in higher fracture resistance (1134.06N, p<.05). CS-HA dentin-conditioning also reduced bacteria by 2.04 log (4.50±0.43) from the initial bacterial load (6.54±0.07, p<.05). There was further bacterial reduction when CS-HA-conditioned root canals were filled with TCS or TCS/CS-HA (0.00 to 0.98±0.57, p>.05).

CONCLUSION

Dentin modification with CS-HA increased the fracture resistance of root dentin, and decreased the residual bacterial burden. TCS/CS-HA potentiated the nanomechanical and physical properties of TCS.

Tannic acid induces dentin biomineralization by crosslinking and surface modification

It is currently known that crosslinking agents can effectively improve the mechanical properties of dentin by crosslinking type I collagen. However, few scholars have focused on the influence of crosslinking agents on the collagen-mineral interface after crosslinking. Analysis of the Fourier transform infrared spectroscopy (FTIR) results showed that hydrogen bonding occurs between the tannic acid (TA) molecule and the collagen. The crosslinking degree of TA to collagen reached a maximum 41.28 ± 1.52. This study used TA crosslinked collagen fibers to successfully induce dentin biomineralization, and the complete remineralization was achieved within 4 days. The crosslinking effect of TA can improve the mechanical properties and anti-enzyme properties of dentin. The elastic modulus (mean and standard deviation) and hardness values of the remineralized dentin pretreated with TA reached 19.1 ± 1.12 GPa and 0.68 ± 0.06 GPa, respectively, which were close to those of healthy dentin measurements, but significantly higher than those of dentin without crosslinking (8.91 ± 1.82 GPa and 0.16 ± 0.01 GPa). The interface energy between the surface of collagen fibers and minerals decreased from 10.59 mJ m^-2 to 4.19 mJ m^-2 with the influence of TA. The current work reveals the importance of tannic acid crosslinking for dentin remineralization while providing profound insights into the interfacial control of biomolecules in collagen mineralization.

Advances in biomineralization-inspired materials for hard tissue repair

Biomineralization is the process by which organisms form mineralized tissues with hierarchical structures and excellent properties, including the bones and teeth in vertebrates. The underlying mechanisms and pathways of biomineralization provide inspiration for designing and constructing materials to repair hard tissues. In particular, the formation processes of minerals can be partly replicated by utilizing bioinspired artificial materials to mimic the functions of biomolecules or stabilize intermediate mineral phases involved in biomineralization. Here, we review recent advances in biomineralization-inspired materials developed for hard tissue repair. Biomineralization-inspired materials are categorized into different types based on their specific applications, which include bone repair, dentin remineralization, and enamel remineralization. Finally, the advantages and limitations of these materials are summarized, and several perspectives on future directions are discussed.

Progress on Biomimetic Mineralization and Materials for Hard Tissue Regeneration

Biomineralization is a process in which natural organisms regulate the crystal growth of inorganic minerals, resulting in hierarchical structured biominerals with excellent properties. Typical biominerals in the human body are the bones and teeth, and damage to these hard tissues directly affect our daily lives. The repair of bones and teeth in a biomimetic way, either by using a biomimetic mineralization strategy or biomimetic materials, is the key for hard tissue regeneration. In this review, we briefly introduce the structure of bone and tooth, and highlight the fundamental role of collagen mineralization in tissue repair. The recent progress on intra-/extrafibrillar collagen mineralization by a biomimetic strategy or materials is presented, and their potential for tissue regeneration is discussed. Then, recent achievements on bone and tooth repair are summarized, and these works are discussed in the view of materials science and biological science, providing a broader vision for the future research of hard tissue repair techniques. Lastly, recent progress on hard tissue regeneration is concluded, and existing problems and future directions are prospected.

Hydroxypropylmethylcellulose as a film and hydrogel carrier for ACP nanoprecursors to deliver biomimetic mineralization

Demineralization of hard tooth tissues leads to dental caries, which cause health problems and economic burdens throughout the world. A biomimetic mineralization strategy is expected to reverse early dental caries. Commercially available anti-carious mineralizing products lead to inconclusive clinical results because they cannot continuously replenish the required calcium and phosphate resources. Herein, we prepared a mineralizing film consisting of hydroxypropylmethylcellulose (HPMC) and polyaspartic acid-stabilized amorphous calcium phosphate (PAsp-ACP) nanoparticles. HPMC which contains multiple hydroxyl groups is a film-forming material that can be desiccated to form a dry film. In a moist environment, this film gradually changes into a gel. HPMC was used as the carrier of PAsp-ACP nanoparticles to deliver biomimetic mineralization. Our results indicated that the hydroxyl and methoxyl groups of HPMC could assist the stability of PAsp-ACP nanoparticles and maintain their biomimetic mineralization activity. The results further demonstrated that the bioinspired mineralizing film induced the early mineralization of demineralized dentin after 24 h with increasing mineralization of the whole demineralized dentin (3-4 µm) after 72-96 h. Furthermore, these results were achieved without any cytotoxicity or mucosa irritation. Therefore, this mineralizing film shows promise for use in preventive dentistry due to its efficient mineralization capability.

Polyaminoacids in Biomimetic Collagen Mineralization: Roles of Isomerization and Disorder in Polyaspartic and Polyglutamic Acids

The extracellular matrix of hard connective tissues is composed primarily of mineralized collagen fibrils. Acidic noncollagenous proteins play important roles in mediating mineralization of collagen. Polyaspartate, a homopolymer substitute for such proteins, has been used extensively in in vitro models to produce biomimetic mineralized collagen. Polyglutamate behaves differently in mineralization models, despite its chemical similarity. We show that polyaspartate is a 350 times more effective inhibitor of solution precipitation of hydroxyapatite than polyglutamate. Supersaturated CaP solutions stabilized with polyaspartic acid produce collagen with aligned intrafibrillar mineral, while solutions containing polyglutamate lead to the formation of unaligned mineral clusters on the fibril surface. Molecular analysis showed that the commercial polyaspartic acid contains substantial isomerization, unlike polyglutamic acid. Hence, the secondary structure of polyaspartic acid is more disordered than that of polyglutamic acid. The increased flexibility of the polyaspartic acid chain may explain its potency as an inhibitor of solution crystallization and a mediator of intrafibrillar collagen mineralization.

Polymer-Induced Liquid Precursor (PILP) remineralization of artificial and natural dentin carious lesions evaluated by nanoindentation and microcomputed tomography

OBJECTIVES

The study evaluates the efficacy to remineralize artificial and natural dentin lesions through restorative dental procedures that include the Polymer-Induced Liquid Precursor (PILP) method comprising polyaspartic acid (pAsp).

METHODS

Novel ionomeric cement compositions based on bioglass 45S5 and pAsp mixtures, as well as conditioning solutions (conditioner) containing 5 mg/mL pAsp, were developed and tested on demineralized dentin blocks (3-4 mm thick) on shallow and deep lesions with the thickness of 140 μm ± 50 and 700 μm ± 50, respectively. In the first treatment group, 20 μL of conditioner was applied to demineralized shallow (n = 3) and deep (n = 3) lesion specimens for 20 s before restoration with glass ionomer cement (RMGIC). For the PILP cement treatment group, cement was applied onto the wet surface of the demineralized specimen for both shallow (n = 3) and deep (n = 3) artificial lesions after the application of the conditioner and before the final restoration. Sample groups were compared to RMGIC restoration, for both shallow and deep lesions (n = 3 each) and treatments in PILP-solution (n = 3 for deep lesions) without restoration for 4 weeks. All of the restored specimens were immersed in simulated body fluid (SBF) solution for 2 weeks and 4 weeks for shallow and deep lesions respectively to allow for remineralization. The artificial lesion specimens were evaluated for changes in the nanomechanical profile (E-modulus and hardness) using nanoindentation. Shallow lesions were analyzed by SEM under vacuum for changes in morphology caused by PILP treatments. Also, a pilot study on human third molars with moderate lesions in dentin (n = 3) was initiated to test the efficacy of treatments in natural lesions based on mineral densities using microcomputed tomography (μCT) at 0, 1, and 3 months.

RESULTS

This study showed that functional remineralization of artificial lesions using PILP-releasing restoratives occurred, indicated by an increase of the elastic modulus in shallow lesions and in the middle zone of deep artificial lesions. The mechanical improvement was significant when compared to RMGIC restoration without pAsp (P < 0.05). Nonetheless, recovery across artificial lesions was most significant when specimens were immersed into PILP-solution with restorative (P < 0.01). Furthermore, natural lesions increased in mineral volume content to a higher degree when the restorative treatment included the PILP-method (P < 0.05). However, none of the natural lesions recovered to full mineral degree regardless of the treatments.

CLINICAL SIGNIFICANCE/CONCLUSION

These findings indicate the benefit of PILP applications in the functional repair of dentin caries and illustrate the challenge to integrate the PILP-method into a restorative approach in minimally invasive dental procedures.

Cell-tailored calcium carbonate particles with different crystal forms from nanoparticle to nano/microsphere

Inspired by biomineralization, the first synthesis of size-tunable calcium carbonates from nanoparticles (YC-CaCO3 NPs) to nano/microspheres (YC-CaCO3 N/MSs) with a porous structure was accomplished using a facile method under the mediation of the secretion from yeast cells (YCs). The biomolecules derived from the secretion of YCs were used as conditioning and stabilizing agents to control the biosynthesis of the YC-CaCO3 materials. The morphology and crystal forms of YC-CaCO3 materials can be affected by the biomolecules from the secretion of YCs. With increasing concentrations of biomolecules, the morphologies of the obtained CaCO3 materials changed from nanoparticles to nano/microspheres with a porous structure, while the crystal forms transformed from amorphous to calcite. Functional investigations showed that YC-CaCO3 NSs with a porous structure effectively acted as anticancer drug carriers with accurate and selective drug release in tumor tissue, which suggests that they have great potential to function as a therapeutic delivery system. These application features are mainly attributed to the satisfactory biocompatibility and biodegradability, high drug-loading capacity, and pH-dependent sustained drug release performance of the porous YC-CaCO3 NSs. The biomimetic synthesis strategy of YC-CaCO3 materials mediated by YC secretion not only helps to shed light on the biomineralization mechanism in organisms, but may also lead to a new means of biosynthesizing organic-inorganic nanocomposites.

Effect of silver diamine fluoride and proanthocyanidin on resistance of carious dentin to acid challenges

The aim of this study was to evaluate the effect of silver diamine fluoride and grape seed extract on the microstructure and mechanical properties of carious dentin following exposure to acidic challenge. Ninety-eight molars with occlusal caries were used. In the control group the specimens were kept in distilled water. In the GSE group, the specimens were immersed in 6.5% grape seed extract solution for 30 minutes. In the SDF group, the specimens were immersed in 30% SDF solution for 4 minutes. In the GSE+SDF group, the specimens were immersed in 6.5% grape seed extract solution for 30 minutes and then exposed to 30% SDF solution for 4 minutes. All the groups underwent pH cycling model for 8 days. Microhardness measurements were taken at the baseline before surface treatments and after pH cycling. Elastic modulus was measured, after pH cycling. In the control group, the final hardness was significantly lower than the initial hardness (P = 0.001). In the SDF group, the final hardness was significantly higher than the initial hardness (P < 0.001). There was no significant difference between the initial and final hardness values in the GSE and GSE + SDF groups (p = 0.92, p = 0.07). The H₁-H₀ in the SDF group was significantly higher than the other groups (P<0.05). Moreover, elastic modulus of the experimental groups except GSE+SDF group was significantly higher than control. The highest mean elastic modulus was detected in the SDF group (P<0.001). The use of SDF and GSE prior to the acid challenge improved mechanical properties. Microstructural investigation, using scanning electron microscope showed dentin structure protection against acid challenges with SDF treatment and collagen matrix stabilization with GSE treatment. However combined use of these agents was not beneficious.

Programmed antibacterial and mineralization therapy for dental caries based on zinc-substituted hydroxyapatite/ alendronate-grafted polyacrylic acid hybrid material

The domination of cariogenic bacteria in dental plaque biofilms is the primary cause of dental caries. In view of this, for the purpose of an effective treatment of dental caries, it is of great importance to inhibit the activity of acidogenic bacteria and promote the remineralization of damaged teeth simultaneously. However, the expensive antibacterial agents and poor mineralization ability of materials limit the practical applications. Biomineralization regulated by non-collagenous proteins (NCPs) gives hints to combine the remineralization ability of NCPs with accessible antibacterial property effectively. In this work, we propose a programmed antibacterial and remineralization strategy for the therapy of dental caries based on zinc-substituted hydroxyapatite/ alendronate-grafted polyacrylic acid hybrid nanoneedles (ZHA@ALN-PAA). This hybrid material dissolves in the acidic caries environment and regulate the pH to nearly neutral (6.5). Abundant calcium/ phosphate ions are supplemented and the ALN-PAA embedded in it has also been released, which assists the biomineralization on tooth defect. It has been revealed that the inhibition ratio of ZHA@ALN-PAA against Streptococcus mutans is the highest (11.25 folds that of HA), which originates from the highest zinc ions released (132.9 mg/L). Besides, the interspace of etched enamel is fully filled with regenerated nanorods and the surface microhardness (SMH) is significantly improved (3.68 folds that of etched enamel) after only 3 days of mineralization in vitro. This strategy developed here is simple and cost-effective, which can be referred to design the effective anti-caries materials applied for clinic treatment and daily oral care.

Polydopamine Promotes Dentin Remineralization via Interfacial Control

Biomineralization has intrigued researchers for decades. Although mineralization of type I collagen has been universally investigated, this process remains a great challenge due to the lack of mechanistic understanding of the roles of biomolecules. In our study, dentine was successfully repaired using the biomolecule polydopamine (PDA), and the remineralized dentine exhibited mechanical properties comparable to those of natural dentine. Detailed analyses of the collagen mineralization process facilitated by PDA showed that PDA can promote intrafibrillar mineralization with a decreased heterogeneous nucleation barrier for hydroxyapatite (HAP) by reducing the interfacial energy between collagen fibrils and amorphous calcium phosphate (ACP), resulting in the conversion of an increasing amount of nanoprecursors into collagen fibrils. The present work highlights the importance of interfacial control in dentine remineralization and provides profound insight into the regulatory effect of biomolecules in collagen mineralization as well as the clinical application of dentine restoration.

Enhancing Collagen Mineralization with Amelogenin Peptide: Towards the Restoration of Dentin

Mammalian teeth primarily consist of two distinct calcified tissues, enamel and dentin, that are intricately integrated by a complex and critical structure, the dentin-enamel junction (DEJ). Loss of enamel exposes the underlying dentin, increasing the risk of several irreversible dental diseases. This paper highlights the significance of utilizing the functional domains of a major enamel matrix protein, amelogenin, intrinsic to tooth enamel and the DEJ interface, to rationally design smaller bioinspired peptides for regeneration of tooth microstructures. Using this strategy, we designed a synthetic peptide, P26, that demonstrates a remarkable dual mineralization potential to restore incipient enamel decay and mineralization defects localized in peripheral dentin below the DEJ. As a proof of principle, we demonstrate that interaction between P26 and collagen prompts peptide self-assembly, followed by mineralization of collagen fibrils in vitro. P26-mediated nucleation of hydroxyapatite (HAP) crystals on demineralized dentin in situ significantly facilitates the recovery of mineral density and effectively restores the biomechanical properties of dentin to near-native levels, suggesting that P26-based therapy has promising applications for treating diverse mineralized tissue defects in the tooth.

Promotion effect of immobilized chondroitin sulfate on intrafibrillar mineralization of collagen

Chondroitin sulfate (CS) is widespread in mineralized tissues and is considered to play crucial roles during the mineralization process. However, its role in biomineralization remains controversial. In the present study, CS is immobilized to collagen fibrils to mimic its state in biomineralization. The results demonstrate that immobilized CS on collagen fibrils accelerates calcium phosphate nucleation and significantly promotes collagen mineralization by accumulating calcium ions in collagen fibrils. The stochastic optical reconstruction microscopy results confirm that CS gives the specific nucleation sites for calcium phosphate to preferentially form, the improved intrafibrillar heterogeneous nucleation of calcium phosphate facilitates intrafibrillar mineralization. It is found remarkably accelerated remineralization of CS immobilized demineralized dentin is achieved. This study offers insight on the understanding of the function of the biomacromolecule CS on the biomineralization front. In addition, CS effectively promotes intrafibrillar mineralization, which highlights fine prospect for CS to reconstruct collagen-mineralized tissues as a natural material.

Biomineralization of dentin

A single biomineralization of demineralized dentin is significant to restore the demineralized dentin due to dental caries or erosion. In recent years, meaningful progress has been made regarding the mechanisms involved in the biomineralization of dentin collagen. Concepts changing from the classical ion-based crystallization to non-classical particle-based crystallization, inspired a different strategy to infiltrate the demineralized dentin collagen. The remarkable discovery was the report of liquid-like amorphous calcium phosphate as nanoprecursor particles to carbonated hydroxyapatite. The non-collagenous proteins and their analogues are widely investigated, for their key role in controlling mineralization during the process of crystal nucleation and growth. The in-depth studies of the gap zone provided significant improvements in our understanding of the structure of collagen and of the intrafibrillar remineralization of collagen fibrils. The collagen is not a passive substrate as previously supposed, and the active role of guiding nanoprecursor infiltration and mediating its nucleation has been demonstrated. Furthermore, recovery of mechanical properties has been evaluated to determine the effectiveness of dentin remineralization. Finally, the problems regarding the origin formation of the calcium phosphate that is deposited in the collagen, and the exact interactions between the non-collagenous proteins, amorphous calcium phosphate and collagen are still unclear. We reviewed the importance of these findings in enriching our understanding of dentin biomineralization, while addressing certain limitations that are inherent to in vitro studies.

Remineralization of demineralized dentin using a dual analog system

OBJECTIVE

Improved methods are needed to remineralize dentin caries in order to promote conservation of dentin tissue and minimize the surgical interventions that are currently required for clinical treatment. Here, we test the hypothesis that bulk substrates can be effectively mineralized via a dual analog system proposed by others, using a tripolyphosphate (TPP) "templating analog" and a poly(acrylic acid) (PAA) or poly(aspartic acid) (pAsp) "sequestration analog," the latter of which generates the polymer-induced liquid-precursor (PILP) mineralization process studied in our laboratory.

MATERIAL & METHODS

Demineralized human dentin slices were remineralized with and without pre-treatment with TPP, using either PAA or pAsp as the PILP process-directing agent. A control experiment with no polymer present was used for comparison.

RESULTS

No mineralization was observed in any of the PAA groups. In both the pAsp and no polymer groups, TPP inhibited mineralization on the surfaces of the specimens but promoted mineralization within the interiors. Pre-treatment with TPP enhanced overall mineralization of the pAsp group. However, when analysed via TEM, regions with little mineral were still present.

CONCLUSION

Poly(acrylic acid) was unable to remineralize demineralized dentin slices under the conditions employed, even when pre-treated with TPP. However, pre-treatment with TPP enhanced overall mineralization of specimens that were PILP-remineralized using pAsp.

Phosphorylated chitosan to promote biomimetic mineralization of type I collagen as a strategy for dentin repair and bone tissue engineering

This novel biomimetic mineralization technique provides an efficient method to produce an advanced mineralized matrix.

Biomimetic regulation of dentine remineralization by amino acid in vitro

OBJECTIVE

The aim of this study was to evaluate the effect of conditioning solutions containing DL-aspartic amino (Asp) on dentine remineralization induced by bioactive glass 45S5 (BAG) in a simulated oral environment.

METHODS

Sixty dentine discs from human third molars were used. Dentine specimens were treated with ethylene diamine tetraacetic acid (EDTA) to create a partially demineralization model and randomly divided to 4 groups: Artificial saliva (AS) group, Asp group (pretreated with Asp and remineralized with distilled water), BAG group (pretreated with distilled water and remineralized by BAG), Asp-BAG group (pretreated with Asp and remineralized by BAG). Each samples were measured at various time points, and at the end of the experiment, 6% citric acid challenge were taken. The remineralization characteristics were analyzed by using the spectroscopic data from attenuated total reflectance spectroscopy (ATR-IR) and Raman spectroscopy. The micro-morphology and structure were characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD). Dentine permeability was measured before and after each treatment to evaluate the resistance of remineralized layer to acid and simulated oral environment.

RESULTS

Both BAG and Asp-BAG groups significantly reduced dentine permeability and formed enamel-like apatite layers on dentine surface. For the mineralization of BAG, Asp showed inhibition effect. The 7-day mineral matrix area ratio in BAG group (12.54±2.29) was lower than the value in the Asp-BAG group (17.77±2.27) (p<0.05) and the Raman intensity (RI%) in Asp-BAG Group (1.49±0.26) was also significantly higher than that of BAG group (1.34±0.14) (p<0.05). According to permeability test, the apatite layer in BAG group and Asp-BAG group effectively occluded the dentinal tubules (p<0.05) and had certain acidic resistance (p>0.05). Furthermore, adsorbed acidic amino acid on hydroxyapatite (HAP) altered the crystal to increase into a larger size in diameter during crystal growth.

SIGNIFICANCE

The study demonstrated that a superior remineralization efficacy of BAG with Asp pretreatment on dentine.

Biomineralization-Inspired Material Design for Bone Regeneration

Synthetic substitutes of bone grafts, such as calcium phosphate-based ceramics, have shown some good clinical successes in the regeneration of large bone defects and are currently extensively used. In the past decade, the field of biomineralization has delivered important new fundamental knowledge and techniques to better understand this fascinating phenomenon. This knowledge is also applied in the field of biomaterials, with the aim of bringing the composition and structure, and hence the performance, of synthetic bone graft substitutes even closer to those of the extracellular matrix of bone. The purpose of this progress report is to critically review advances in mimicking the extracellular matrix of bone as a strategy for development of new materials for bone regeneration. Lab-made biomimicking or bioinspired materials are discussed against the background of the natural extracellular matrix, starting from basic organic and inorganic components, and progressing into the building block of bone, the mineralized collagen fibril, and finally larger, 2D and 3D constructs. Moreover, bioactivity studies on state-of-the-art biomimicking materials are discussed. By addressing these different topics, an overview is given of how far the field has advanced toward a true bone-mimicking material, and some suggestions are offered for bridging current knowledge and technical gaps.

A novel fluorescent adhesive-assisted biomimetic mineralization

We propose a novel fluorescent adhesive-assisted biomimetic mineralization strategy, based on which 1 wt% of sodium fluorescein and 25 wt% of polyacrylic acid stabilized amorphous calcium phosphate (PAA-ACP) nanoparticles were incorporated into a mild self-etch adhesive (Clearfil S3 Bond) as a fluorescent mineralizing adhesive. The characterization of the PAA-ACP nanoparticles indicates that they were spherical particles clustered together, each particle with a diameter of approximately 20-50 nm, in a metastable phase with two characteristic absorption peaks (1050 cm-1 and 580 cm-1). Our results suggest that the fluorescent mineralizing adhesive was non-cytotoxic with minimal esthetic interference and its fluorescence intensity did not significantly decrease within 6 months. Our data reveal that the fluorescent mineralizing adhesive could induce the extra- and intra-fibrillar remineralization of the reconstituted type I collagen, the demineralized enamel and dentin substrate. Our data demonstrate that a novel fluorescent adhesive-assisted biomimetic mineralization strategy will pave the way to design and produce anti-carious materials for the prevention of dental caries.

Influence of fluoride on the mineralization of collagen via the polymer-induced liquid-precursor (PILP) process

OBJECTIVE

The polymer-induced liquid-precursor (PILP) mineralization process has been shown to remineralize artificial dentin lesions to levels consistent with those of native dentin. However, nanoindentation revealed that the moduli of those remineralized lesions were only ∼50% that of native dentin. We hypothesize that this may be due to the PILP process having been previously optimized to obtain high amounts (∼70wt%) of intrafibrillar crystals, but without sufficient interfibrillar mineral, another significant component of dentin.

METHODS

Fluoride was added to the PILP-mineralization of collagen from rat tail tendon at varying concentrations to determine if a better balance of intra- versus inter-fibrillar mineralization could be obtained, as determined by electron microscopy. Nanoindentation was used to determine if fluoridated apatite could improve the mechanical properties of the composites.

RESULTS

Fluoride was successfully incorporated into the PILP-mineralization of rat tail tendon and resulted in collagen-mineral composite systems with the mineral phase of hydroxyapatite containing various levels of fluoridation. As the fluoride concentration increased, the crystals became larger and more rod-like, with an increasing tendency to form on the fibril surfaces rather than the interior. Nanomechanical testing of the mineralized tendons revealed that fluoride addition did not increase modulus over PILP mineralization alone. This likely resulted from the separated nature of collagen fibrils that comprise tendon, which does not provide lateral reinforcement and therefore may not be suited for the compressive loads of nanoindentation.

SIGNIFICANCE

This work contributes to the development of minimally invasive approaches to caries treatment by determining if collagen can be functionally mineralized.

Citrate Improves Collagen Mineralization via Interface Wetting: A Physicochemical Understanding of Biomineralization Control

Biological hard tissues such as bones always contain extremely high levels of citrate, which is believed to play an important role in bone formation as well as in osteoporosis treatments. However, its mechanism on biomineralization is not elucidated. Here, it is found that the adsorbed citrate molecules on collagen fibrils can significantly reduce the interfacial energy between the biological matrix and the amorphous calcium phosphate precursor to enhance their wetting effect at the early biomineralization stage, sequentially facilitating the intrafibrillar formation of hydroxyapatite to produce an inorganic-organic composite. It is demonstrated experimentally that only collagen fibrils containing ≈8.2 wt% of bound citrate (close to the level in biological bone) can reach the full mineralization as those in natural bones. The effect of citrate on the promotion of the collagen mineralization degree is also confirmed by in vitro dentin repair. This finding demonstrates the importance of interfacial controls in biomineralization and more generally, provides a physicochemical view about the regulation effect of small biomolecules on the biomineralization front.

Self-Etch Adhesive as a Carrier for ACP Nanoprecursors to Deliver Biomimetic Remineralization

Lab biomineralization should be carried out in an actual clinical practice. This study evaluated self-etch adhesive as a carrier for amorphous calcium phosphate (ACP) nanoprecursors to continuously deliver biomimetic remineralization of self-assembly type I collagen and demineralized dentin. Si-containing ACP particles (Si-ACP) stabilized with polyaspartic acid (PAsp) were synthesized and characterized by transmission electron microscopy (TEM), scanning electron microscopy-energy-dispersive X-ray spectroscopy, Fourier transform infrared analysis, X-ray powder diffractometry, and X-ray phototelectron spectroscopy. The biomimetic remineralization of single-layer reconstituted type I collagen fibrils and demineralized dentin was analyzed by using two one-bottle self-etch dentin adhesives (Clearfil S3 Bond (S3), Kurraray-Noritake; Adper Easy One (AEO), 3 M ESPE) as a carrier loaded (or not, in the case of the control) with 25 wt % of Si-ACP particles. In vitro cytotoxicity assessed by the Cell Counting Kit-8 indicated that the Si-ACP particles had no adverse effect on cell viability. The capacity for Ca and P ions release from cured Si-ACP-containing adhesives (S3, AEO) was evaluated by inductively coupled plasma-atomic emission spectrometry, revealing the successively increasing release of Ca and P ions for 28 days. The intra- and extrafibrillar remineralization of type I collagen and demineralized dentin was confirmed by TEM and selected-area electron diffraction when the adhesives were used as a carrier loaded with Si-ACP particles. Therefore, we propose self-etch adhesive as a novel carrier for ACP nanoprecursors to continuously deliver biomimetic remineralization.

From molecules to macrostructures: recent development of bioinspired hard tissue repair

This review summarizes the bioinspired strategies for hard tissue repair, ranging from molecule-induced mineralization, to microscale assembly to macroscaffold fabrication.

Repair of dentin defects from DSPP knockout mice by PILP mineralization

Dentinogenesis imperfecta type II (DGI-II) lacks intrafibrillar mineral with severe compromise of dentin mechanical properties. A Dspp knockout (Dspp-/-) mouse, with a phenotype similar to that of human DGI-II, was used to determine if poly-L-aspartic acid [poly(ASP)] in the "polymer-induced liquid-precursor" (PILP) system can restore its mechanical properties. Dentin from six-week old Dspp-/- and wild-type mice was treated with CaP solution containing poly(ASP) for up to 14 days. Elastic modulus and hardness before and after treatment were correlated with mineralization from Micro x-ray computed tomography (Micro-XCT). Transmission electron microscopy (TEM)/Selected area electron diffraction (SAED) were used to compare matrix mineralization and crystallography. Mechanical properties of the Dspp-/- dentin were significantly less than wild-type dentin and recovered significantly (P < 0.05) after PILP-treatment, reaching values comparable to wild-type dentin. Micro-XCT showed mineral recovery similar to wild-type dentin after PILP-treatment. TEM/SAED showed repair of patchy mineralization and complete mineralization of defective dentin. This approach may lead to new strategies for hard tissue repair.

A rapid, efficient, and facile solution for dental hypersensitivity: The tannin-iron complex

Dental hypersensitivity due to exposure of dentinal tubules under the enamel layer to saliva is a very popular and highly elusive technology priority in dentistry. Blocking water flow within exposed dentinal tubules is a key principle for curing dental hypersensitivity. Some salts used in "at home" solutions remineralize the tubules inside by concentrating saliva ingredients. An "in-office" option of applying dense resin sealants on the tubule entrance has only localized effects on well-defined sore spots. We report a self-assembled film that was formed by facile, rapid (4 min), and efficient (approximately 0.5 g/L concentration) dip-coating of teeth in an aqueous solution containing a tannic acid-iron(III) complex. It quickly and effectively occluded the dentinal tubules of human teeth. It withstood intense tooth brushing and induced hydroxyapatite remineralisation within the dentinal tubules. This strategy holds great promise for future applications as an effective and user-friendly desensitizer for managing dental hypersensitivity.

Methods for biomimetic remineralization of human dentine: a systematic review

This study aimed to review the laboratory methods on biomimetic remineralization of demineralized human dentine. A systematic search of the publications in the PubMed, TRIP, and Web of Science databases was performed. Titles and abstracts of initially identified publications were screened. Clinical trials, reviews, non-English articles, resin-dentine interface studies, hybrid layer studies, hybrid scaffolds studies, and irrelevant studies were excluded. The remaining papers were retrieved with full texts. Manual screening was conducted on the bibliographies of remaining papers to identify relevant articles. A total of 716 studies were found, and 690 were excluded after initial screening. Two articles were identified from the bibliographies of the remaining papers. After retrieving the full text, 23 were included in this systematic review. Sixteen studies used analogues to mimic the functions of non-collagenous proteins in biomineralization of dentine, and four studies used bioactive materials to induce apatite formation on demineralized dentine surface. One study used zinc as a bioactive element, one study used polydopamine, and another study constructed an agarose hydrogel system for biomimetic mineralization of dentine. Many studies reported success in biomimetic mineralization of dentine, including the use of non-collagenous protein analogues, bioactive materials, or elements and agarose hydrogel system.

Fetuin-A adsorption and stabilization of calcium carbonate nanoparticles in a simulated body fluid

Fetuin-A adsorbs onto and stabilizes CaCO₃, as indicated by chemical and morphological changes. Complexed Fetuin-A/CaCO₃ showed decreased size over time in a simulated body fluid indicating potential solubilization of CaCO₃.

8DSS-promoted remineralization of demineralized dentin in vitro

The 8DSS peptide successfully induced nano-crystals precipitation on the collagen matrix. The completely demineralized dentin was effectively remineralized and its mechanical properties were significantly improved.