Simultaneous deposition of tannic acid derivative and covalent conjugation of poly(2-methyl-2-oxazoline) for the construction of antifouling coatings

Bacterial adhesion and subsequent colonization play an important role in the failure of biomedical implants and devices. Thus, development of a simple surface modification strategy to combat bacterial adhesion is highly desirable. In this work, "one-pot" fabrication of antifouling coatings based on simultaneous surface adhesion of trihydroxyphenyl and dihydroxyphenyl moieties of tannic acid (TA) derivative and covalent conjugation of hydrophilic poly(2-methyl-2-oxazoline) (PMOXA) was demonstrated. Surface co-depositions of TA/PMOXA hybrids of different TA derivative to PMOXA weight ratios and different molecular weights of PMOXA were conducted. The surface hydrophilicity and deposition universality on various substrates were investigated. The anti-bacterial and anti-platelet adhesion, as well as anti-biofilm formation abilities, of the TA/PMOXA-based coating were also studied. In vitro hemolysis and cytotoxicity, and in vivo biocompatibility of the TA/PMOXA-based coating were further evaluated. All the results indicate that the TA/PMOXA-based coating could be employed as an antifouling additive on biomedical implants and devices.

Design of a Bioinert Interface Using an Amphiphilic Block Copolymer Containing a Bottlebrush Unit of Oligo(oxazoline)

We designed an amphiphilic block copolymer, poly(methyl methacrylate)-block-poly[oligo(2-ethyl-2-oxazoline) methacrylate] (PMMA-b-P[O(Ox)MA]), suitable for bioinert coating. Angular-dependent X-ray photoelectron spectroscopy and neutron reflectivity measurements revealed that the outermost surface of a dried film of PMMA-b-P[O(Ox)MA] was covered with the PMMA block-rich layer. Once the film came into contact with water, the P[O(Ox)MA] bottlebrush block was segregated toward the water interface. This structural rearrangement in the outermost region of the film resulted in the formation of the swollen oligo(oxazoline) layer with excellent bioinertness in terms of the suppression of serum protein adsorption and NIH3T3 fibroblast adhesion.

Thermoresponsive Poly(2-propyl-2-oxazoline) Surfaces of Glass for Nonenzymatic Cell Harvesting

As one of the nonenzymatic cell-harvesting technologies, a thermal-responsive surface based on poly(2-oxazoline)s has achieved initial success in supporting the adhesion and thermal-induced detachment of animal cells. However, because of the laborious preparation procedure, this technique was only limited to research purposes. In this work, through using poly(glycidyl methacrylate) (PGMA) as the anchor layer, poly(2-propyl-2-oxazoline)s (PPOx) were grafted onto glass wafers through a facile two-step coating and annealing procedure for nonenzymatic cell harvesting. In the first step, the piranha solution-activated glass wafers were immersed into the chloroform solution of PGMA and then annealed for a given period of time to immobilize PGMA onto the glass wafers through the bonding between epoxy groups and hydroxyl groups. In the second step, the PGMA-coated glass wafers were further immersed into the chloroform solution of carboxyl-functionalized PPOx. After annealing, PPOx were immobilized onto the PGMA layer through the bonding between carboxyl groups and the residual epoxy groups. Atomic force microscopy, X-ray photoelectron spectroscopy, and ellipsometry were used to characterize the modified glass wafers. The results of cytocompatibility evaluation showed that the PPOx-coated glass wafers were almost nontoxic and were able to support the adhesion and proliferation of L929 cells well. By lowering the temperature to 8 °C, L929 and Vero cells were successfully detached from the PPOx-coated glass wafers without any enzymatic treatment. Further cultivation has demonstrated that the cooling procedure had little effect on cell viability, and the cells still retained good viability after harvesting.

Fast surface immobilization of native proteins through catalyst-free amino-yne click bioconjugation

Surface immobilization provides a useful platform for biosensing, drug screening, tissue engineering and other chemical and biological applications. However, some of the used reactions are inefficient and/or complicated, limiting their applications in immobilization. Herein, we use a spontaneous and catalyst-free amino-yne click bioconjugation to generate activated ethynyl group functionalized surfaces for fast immobilization of native proteins and cells. Biomolecules, such as bovine serum albumin (BSA), human IgG and a peptide of C(RGDfK), could be covalently immobilized on the surfaces in as short as 30 min. Notably, the bioactivity of the anchored biomolecules remains intact, which is verified by efficiently capturing target antibodies and cells from the bulk solutions. This strategy represents an alternative for highly efficient surface biofunctionalization.

Design of comb-like poly(2-methyl-2-oxazoline) and its rapid co-deposition with dopamine for the study of antifouling properties

In this work, the comb-like poly(2-methyl-2-oxazoline) copolymer, poly(2-aminoethyl methacrylate-random-poly(2-methyl-2-oxazoline) (PMOXA-r-AEMA, PMA) is synthesized, and the CuSO₄/H₂O₂-triggered dopamine/PMA co-deposition process is investigated. Ellipsometry, water contact angle (WCA), and X-ray photoelectron spectroscopy (XPS) are used to characterize the thickness, hydrophilicity, and surface composition of PMA-based coatings. PMA is facilely anchored to substrates within 60 min with the assistance of dopamine/polydopamine triggered by CuSO₄/H₂O₂, and the coating thickness can achieve about 13 nm. Anti-protein adsorption and anti-blood platelet adhesion measurements are also studied to verify their antifouling properties. The adsorption capacity of FITC-BSA can be reduced to 5% of the original surface, and PMA-based coatings present excellent protein-resistant properties (∼95% reduction relative to gold surface) according to surface plasmon resonance (SPR) measurement, and it can resist adhesion of almost all blood platelets. Moreover, it is applied to a capillary inner wall for surface modification. An alkaline protein mixture and egg white proteins are successfully separated, and present excellent stability. The relative standard deviation (RSD) of migration time is lower than 0.71%. The practicability of this promising PMA-based coatings with this preparation strategy can be used for further proteomics analysis.

Facile coating of urinary catheter with bio-inspired antibacterial coating

Formation of bacterial biofilm on indwelling urinary catheters usually causes catheter-associated urinary tract infections (CAUTIs) that represent high percent of nosocomial infections worldwide. Therefore, coating urinary catheter with antibacterial and antifouling coating using facile technique is in great demand. In this study, commercial urinary catheter was coated with a layer of the self-polymerized polydopamine which acts as active platform for the in situ formation of silver nanoparticle (AgNPs) on catheter surface. The formed coating was intensively characterized using spectroscopic and microscopic techniques. The coated catheter has the potential to release silver ion in a sustained manner with a concentration of about 2-4 μg ml-1. Disk diffusion test and colony forming unites assay verified the significant bactericidal potential of the AgNPs coated catheter against both gram-positive and gram-negative bacteria as a consequence of silver ion release. In contrast to commercial catheter, the AgNPs coated catheter prevented the adherence of bacterial cells and biofilm formation on their surfaces. Interestingly, scanning electron microscope investigations showed that AgNPs coated catheter possess greater antifouling potential against gram-positive bacteria than against gram-negative bacteria. Overall, the remarkable antibacterial and antifouling potential of the coated catheter supported the use of such facile approach for coating of different medical devices for the prevention of nosocomial infections.

Design of hierarchical comb hydrophilic polymer brush (HCHPB) surfaces inspired by fish mucus for anti-biofouling

Rationally designing anti-biofouling surfaces using grafted hierarchical comb hydrophilic polymer brushes (HCHPBs).

Encapsulation and Delivery of Neutrophic Proteins and Hydrophobic Agents Using PMOXA-PDMS-PMOXA Triblock Polymersomes

Polymersomes are attractive nanocarriers for hydrophilic and lipophilic drugs; they are more stable than liposomes, tunable, and relatively easy to prepare. The copolymer composition and molar mass are critical features that determine the physicochemical properties of the polymersomes including the rate of drug release. We used the triblock-copolymer, poly(2-methyl-2-oxazoline)-block-poly-(dimethysiloxane)-block-poly(2-methyl-2-oxazoline) (PMOXA-PDMS-PMOXA), to form amphipathic polymersomes capable of loading proteins and small hydrophobic agents. The selected agents were unstable neurotrophins (nerve growth factor and brain-derived neurotrophic factor), a large protein CD109, and the fluorescent drug curcumin. We prepared, characterized, and tested polymersomes loaded with selected agents in 2D and 3D biological models. Curcumin-loaded and rhodamine-bound PMOXA-PDMS-PMOXA polymersomes were used to visualize them inside cells. N-Methyl-d-aspartate receptor (NMDAR) agonists and antagonists were also covalently attached to the surface of polymersomes for targeting neurons. Labeled and unlabeled polymersomes with or without loaded agents were characterized using dynamic light scattering (DLS), UV-vis fluorescence spectroscopy, and asymmetrical flow field-flow fractionation (AF4). Polymersomes were imaged and tested for biological activity in human and murine fibroblasts, murine macrophages, primary murine dorsal root ganglia, and murine hippocampal cultures. Polymersomes were rapidly internalized and there was a clear intracellular co-localization of the fluorescent drug (curcumin) with the fluorescent rhodamine-labeled polymersomes. Polymersomes containing CD109, a glycosylphosphatidylinositol-anchored protein, promoted cell migration in the model of wound healing. Nerve growth factor-loaded polymersomes effectively enhanced neurite outgrowth in dissociated and explanted dorsal root ganglia. Brain-derived neurotrophic factor increased dendritic spine density in serum-deprived hippocampal slice cultures. NMDAR agonist- and antagonist-functionalized polymersomes targeted selectively neurons over glial cells in mixed cultures. Collectively, the study reveals the successful incorporation into polymersomes of biologically active trophic factors and small hydrophilic agents that retain their biological activity in vitro, as demonstrated in selected central and peripheral tissue models.

Dopamine assisted PMOXA/PAA brushes for their switchable protein adsorption/desorption

PMOXA/PAA mixed brushes with switchable protein adsorption/desorption properties were prepared by sequentially grafting PMOXA-NH₂ and PAA-SH onto PDA-coated substrates.

Smart functional polymer coatings for paper with anti-fouling properties

Preparation of functionalized cellulose films on SiO₂ to introduce protein repellent properties evaluated by spectroscopic in situ ellipsometry.

Protein Resistant Polymeric Biomaterials

Toward improving implantable medical devices as well as diagnostic performance, the development of polymeric biomaterials having resistance to proteins remains a priority. Herein, we highlight key strategies reported in the recent literature that have relied upon improvement of surface hydrophilicity via direct surface modification methods or with bulk modification using surface modifying additives (SMAs). These approaches have utilized a variety of techniques to incorporate the surface hydrophilization agent, including physisorption, hydrogel network formation, surface grafting, layer-by-layer (LbL) assembly and blending base polymers with SMAs. While poly(ethylene glycol) (PEG) remains the gold standard, new alternatives have emerged such as polyglycidols, poly(2-oxazoline)s (POx), polyzwitterions, and amphiphilic block copolymers. While these new strategies provide encouraging results, the need for improved correlation between in vitro and in vivo protein resistance is critical. This may be achieved by employing complex protein solutions as well as strides to enhance the sensitivity of protein adsorption measurements.

Functionalization of surfaces with branched polymers

This review summarizes recent developments in the field of surfaces functionalized with branched polymers, including the fabrication methods, morphologies, properties and applications.

Poly(l-lysine)-graft-folic acid-coupled poly(2-methyl-2-oxazoline) (PLL-g-PMOXA-c-FA): a bioactive copolymer for specific targeting to folate receptor-positive cancer cells

In this study, we present the preparation, characterization and application of a novel bioactive copolymer poly(l-lysine)-graft-folic acid-coupled poly(2-methyl-2-oxazoline) (PLL-g-PMOXA-c-FA), which has a specific interaction with folate receptor (FR)-positive cancer cells. Glass surface immobilized with PLL-g-PMOXA-c-FA was demonstrated to be adhesive to FR-positive cancer cells (HeLa, JEG-3) while nonadhesive to FR-negative ones (MCF-7, HepG2) in 3 h. The specific interaction between conjugated FA on the substrate and FRs on the cells could hardly be inhibited unless a high concentration (5 mM) of free FA was used due to the multivalent nature of it. The FA functionality ratio of the copolymer on the substrate had a significant influence on the adhesion of HeLa cells, and our experiments revealed that the affinity of the substrate to the cells declined dramatically with the decrease of functionality ratio. This was believed to be caused by the polydispersity of PMOXA tethers, as supported by GPC and ToF-SIMS data. As a proof of concept in the application of our material, we demonstrated successful recovery of HeLa cells from mixture with MCF-7 (1:100) on the copolymer-coated glass, and our results showed that both high sensitivity (95.6 ± 13.3%) and specificity (24.3 ± 8.6%) were achieved.

Antifouling property of monothiol-terminated bottle-brush poly(methylacrylic acid)-graft-poly(2-methyl-2-oxazoline) copolymer on gold surfaces

A series of well-controlled bottle-brush poly(methylacrylic acid)-graft-poly(2-methyl-2-oxazoline) copolymers were grafted to gold surfaces through an in situ aminolysis reaction to reduce protein adsorption and platelet adhesion.

Pseudopeptide polymer coating for improving biocompatibility and corrosion resistance of 316L stainless steel

The coating formed by electrochemical assembly of hydrolyzed poly(2-methyl-2-oxazoline) and dopamine could improve the migration and proliferation of HUVECs.

Star-shaped poly(2-methyl-2-oxazoline)-based films: rapid preparation and effects of polymer architecture on antifouling properties

Star-shaped poly(2-methyl-2-oxazoline)-based films prepared through polydopamine-assistance provided enhanced antifouling properties than the linear ones, and showed superior stability than PEG films.