Hydrogelation from Self-Assembled and Scaled-Down Chitin Nanofibers by the Modification of Highly Polar Substituents

Chitin nanofibers (ChNFs) with a bundle structure were fabricated via regenerative self-assembly at the nanoscale from a chitin ion gel with an ionic liquid using methanol. Furthermore, the bundles were disentangled by partial deacetylation under alkaline conditions, followed by cationization and electrostatic repulsion in aqueous acetic acid to obtain thinner nanofibers called scaled-down ChNFs. This review presents a method for hydrogelation from self-assembled and scaled-down ChNFs by modifying the highly polar substituents on ChNFs. The modification was carried out by the reaction of amino groups on ChNFs, which were generated by partial deacetylation, with reactive substituent candidates such as poly(2-oxazoline)s with electrophilic living propagating ends and mono- and oligosaccharides with hemiacetallic reducing ends. The substituents contributed to the formation of network structures from ChNFs in highly polar dispersed media, such as water, to produce hydrogels. Moreover, after the modification of the maltooligosaccharide primers on ChNFs, glucan phosphorylase-catalyzed enzymatic polymerization was performed from the primer chain ends to elongate the amylosic graft chains on ChNFs. The amylosic graft chains formed double helices between ChNFs, which acted as physical crosslinking points to construct network structures, giving rise to hydrogels.

Bottlebrush copolymers for gene delivery: influence of architecture, charge density, and backbone length on transfection efficiency

The influence of polymer architecture of polycations on their ability to transfect mammalian cells is probed. Polymer bottle brushes with grafts made from partially hydrolysed poly(2-ethyl-2-oxazoline) are used while varying the length of the polymer backbone as well as the degree of hydrolysis (cationic charge content). Polyplex formation is investigated via gel electrophoresis, dye-displacement and dynamic light scattering. Bottle brushes show a superior ability to complex pDNA when compared to linear copolymers. Also, nucleic acid release was found to be improved by a graft architecture. Polyplexes based on bottle brush copolymers showed an elongated shape in transmission electron microscopy images. The cytotoxicity against mammalian cells is drastically reduced when a graft architecture is used instead of linear copolymers. Moreover, the best-performing bottle brush copolymer showed a transfection ability comparable with that of linear poly(ethylenimine), the gold standard of polymeric transfection agents, which is used as positive control. In combination with their markedly lowered cytotoxicity, cationic bottle brush copolymers are therefore shown to be a highly promising class of gene delivery vectors.

Polyoxazoline Hydrogels fabricated by Stereolithography

The development of hydrogel materials in additive manufacturing displaying stiff and strong mechanical properties while maintaining high water uptake, remains a great challenge. Taking advantage of the versatility of poly(oxazoline)...

A thermogelling organic-inorganic hybrid hydrogel with excellent printability, shape fidelity and cytocompatibility for 3D bioprinting

Alginates are the most commonly used bioink in biofabrication, but their rheological profiles makes it very challenging to perform real 3D printing. In this study, an advanced hybrid hydrogel ink was developed, a mixture of thermogelling diblock copolymer, alginate and clay i.e. Laponite XLG. The reversible thermogelling and shear thinning properties of the diblock copolymer in the ink system improves handling and 3D printability significantly. Various three-dimensional constructs, including suspended filaments, were printed successfully with high shape fidelity and excellent stackability. Subsequent ionic crosslinking of alginate fixates the printed scaffolds, while the diblock copolymer is washed out of the structure, acting as a fugitive material on the (macro)molecular level. Finally, cell-laden printing and culture over 21 days demonstrated good cytocompatibility and feasibility of the novel hybrid hydrogels for 3D bioprinting. We believe that the developed material could be interesting for a wide range of bioprinting applications including tissue engineering and drug screening, potentially enabling also other biological bioinks such as collagen, hyaluronic acid, decellularized extracellular matrix or cellulose based bioinks.

Development of a 3D printable and highly stretchable ternary organic-inorganic nanocomposite hydrogel

Hydrogels that can be processed with additive manufacturing techniques and concomitantly possess favorable mechanical properties are interesting for many advanced applications. However, the development of novel ink materials with high intrinsic 3D printing performance has been proven to be a major challenge. Herein, a novel 3D printable organic-inorganic hybrid hydrogel is developed from three components, and characterized in detail in terms of rheological property, swelling behavior and composition. The nanocomposite hydrogel combines a thermoresponsive hydrogel with clay LAPONITE® XLG and in situ polymerized poly(N,N-dimethylacrylamide). Before in situ polymerization, the thermogelling and shear thinning properties of the thermoresponsive hydrogel provides a system well-suited for extrusion-based 3D printing. After chemical curing of the 3D-printed constructs by free radical polymerization, the resulting interpenetrating polymer network hydrogel shows excellent mechanical strength with a high stretchability to a tensile strain at break exceeding 550%. Integrating with the advanced 3D-printing technique, the introduced material could be interesting for a wide range of applications including tissue engineering, drug delivery, soft robotics and additive manufacturing in general.

Preparation and gelation behaviors of poly(2-oxazoline)-grafted chitin nanofibers

Based on our previous work on successful gelation of poly(2-methyl-2-oxazoline)-grafted chitin nanofibers (ChNFs) with high polar media, in this study, we investigated the preparation and gelation behaviors of the ChNFs having different poly(2-alkyl-2-oxazoline) graft chains, that is, poly(2-methyl-2-oxazoline), poly(2-isopropyl-2-oxazoline), and poly(2-butyl-2-oxazoline), with various disperse media. The grafting was carried out by reactions of living propagating ends of poly(2-alkyl-2-oxazoline)s with amino groups present on the self-assembled ChNFs, which were obtained from a chitin ion gel. The products formed gels in the reaction mixtures, which could be converted into hydrogels. All the products with the three poly(2-alkyl-2-oxazoline) graft chains formed gels with high polar media. Besides, gelation of the product with poly(2-butyl-2-oxazoline) was observed by immersing it in relatively non-polar media such as benzyl alcohol, ethyl acetate, and toluene. The formation process of network structures by the grafting of poly(2-alkyl-2-oxazoline)s on ChNFs is proposed to induce gelation of the products.

Crosslinking of hydrophilic polymers using polyperoxides

Hydrogels that can mimic mechanical properties and functions of biological tissue have attracted great interest in tissue engineering and biofabrication. In these fields, new materials and approaches to prepare hydrogels without using toxic starting materials or materials that decompose into toxic compounds remain to be sought after. Here, we report the crosslinking of commercial, unfunctionalized hydrophilic poly(2-ethyl-2-oxazoline) using peroxide copolymers in their melt. The influence of temperature, peroxide copolymer concentration, and duration of the crosslinking process has been investigated. The method allows to create hydrogels from unfunctionalized polymers in their melt and to control the mechanical properties of the resulting materials. The design of hydrogels with a suitable mechanical performance is of crucial importance in many existing and potential applications of soft materials, including medical applications.

Hydrogel scaffolds for tissue engineering: the importance of polymer choice

We explore the design and synthesis of hydrogel scaffolds for tissue engineering from the perspective of the underlying polymer chemistry. The key polymers, properties and architectures used, and their effect on tissue growth are discussed.

Temperature-Dependent Rheological and Viscoelastic Investigation of a Poly(2-methyl-2-oxazoline)-b-poly(2-iso-butyl-2-oxazoline)-b-poly(2-methyl-2-oxazoline)-Based Thermogelling Hydrogel

The synthesis and characterization of an ABA triblock copolymer based on hydrophilic poly(2-methyl-2-oxazoline) (pMeOx) blocks A and a modestly hydrophobic poly(2-iso-butyl-2-oxazoline) (piBuOx) block B is described. Aqueous polymer solutions were prepared at different concentrations (1-20 wt %) and their thermogelling capability using visual observation was investigated at different temperatures ranging from 5 to 80 °C. As only a 20 wt % solution was found to undergo thermogelation, this concentration was investigated in more detail regarding its temperature-dependent viscoelastic profile utilizing various modes (strain or temperature sweep). The prepared hydrogels from this particular ABA triblock copolymer have interesting rheological and viscoelastic properties, such as reversible thermogelling and shear thinning, and may be used as bioink, which was supported by its very low cytotoxicity and initial printing experiments using the hydrogels. However, the soft character and low yield stress of the gels do not allow real 3D printing at this point.

Utilization of 4-(trifluoromethyl)benzenesulfonates as Counter Ions Tunes the Initiator Efficiency of Sophisticated Initiators for the Preparation of Well-Defined poly(2-oxazoline)s

During the last decades, poly(2-oxazoline)s (POx) have gained increased interest due to their versatility. In particular, cationic ring-opening polymerization (CROP) enables the synthesis of well-defined polymers bearing quantitative α- and ω-functionalities. In contrast to small initiating groups, the introduction of more sophisticated, respectively demanding groups remains challenging. To fulfill this challenge, the initiator should comply with one major requirement in order to yield well-defined polymers: a fast and complete initiation. The straight forward two-step synthesis of a novel initiator containing a 4-(trifluoromethyl)benzenesulfonate (fluorylate, TosCF₃ ) counter-ion is herein presented to accomplish the introduction of a sophisticated functional 3-(2-(2-ethoxy)ethoxy)ethoxy)prop-1-ene (TEG) initiating group. Kinetic studies are conducted in acetonitrile and chlorobenzene using the hydrophilic 2-ethyl-2-oxazoline (EtOx) as well as the hydrophobic 2-octyl-2-oxazoline (OctOx) as monomers to examine the influences of the solvent as well as the different monomers. In particular, the initiator efficiency is determined by ¹ H and ¹⁹ F nuclear magnetic resonance spectroscopy and compared to the corresponding tosylate (TEGTos) and triflate (TEGTf). It is shown that the fluorylate combines the stability of the tosylate and an enhanced propagation rate comparable to the triflate.

Influence of charged groups on the cross-linking efficiency and release of guest molecules from thiol-ene cross-linked poly(2-oxazoline) hydrogels

We describe the preparation of hydrogels using highly functionalized poly(oxazoline) based polymeric precursors and cross-linking via UV mediated radical thiol-ene chemistry. Random copolymers were synthesized based on the combination of the more hydrophilic 2-methyl-2-oxazoline or the less hydrophilic monomer 2-ethyl-2-oxazoline with 2-(3-butenyl)-2-oxazoline. These copolymers were functionalized via a post-polymerization technique with thiol or cysteine functionality at the side chain. Hence, hydrogels were obtained, for which the thermo-responsive behavior, network density and correlated properties such as swelling and mechanics, as well as the possibility of electrostatic interaction, can be tuned. Cell culture tests demonstrated good cytocompatibility of the synthesized copolymers and hydrogels. A study with two low molecular weight substances, methylene blue and fluorescein sodium, was performed to investigate how the thermo-responsive behavior or the positive charge incorporated by cysteine could influence the interaction with the compounds. It was found that the interaction with the hydrogel network was strongly influenced by the chemical properties of the dye. A hydrophilic and positively charged hydrogel network was shown to be a promising candidate for the uptake and prolonged release of negatively charged low molecular weight substances.

A degradable low molecular weight monomer system with lower critical solution temperature behaviour in water

A degradable thermo-responsive system was prepared and investigated. The degradation behaviour induced by the cleavage process of the thermo-sensitive crown ethers effectively altered the thermo-responsiveness.

Amidation of methyl ester side chain bearing poly(2-oxazoline)s with tyramine: a quest for a selective and quantitative approach

Three new amidation approaches are evaluated to incorporate tyramine on methyl ester functional poly(2-oxazolines).

Hyperbranched poly(ethylenimine-co-oxazoline) by thiol–yne chemistry for non-viral gene delivery: investigating the role of polymer architecture

Synthesis of long-chain hyperbranched poly(ethylenimine-co-oxazoline)s by AB₂ thiol–yne chemistry is reported, and their application as pDNA transfection agents studied.

Straightforward access to biocompatible poly(2-oxazoline)-coated nanomaterials by polymerization-induced self-assembly

Poly(2-ethyl-2-oxazoline) chain transfer agents are employed in photoinitiated RAFT PISA, providing access to biocompatible core–shell polymeric nanostructures with various morphologies.

Tumor targeting with pH-responsive poly(2-oxazoline)-based nanogels for metronomic doxorubicin treatment

The synthesis of a new nanogel drug carrier system loaded with the anti-cancer drug doxorubicin (DOX) is presented. Poly(2-oxazoline) (POx) based nanogels from block copolymer micelles were cross-linked and covalently loaded with DOX using pH-sensitive Schiff' base chemistry. DOX loaded POx based nanogels showed a toxicity profile comparable to the free drug, while unloaded drug carriers showed no toxicity. Hemolytic activity and erythrocyte aggregation of the drug delivery system was found to be low and cellular uptake was investigated by flow cytometry and fluorescence microscopy. While the amount of internalized drug was enhanced when incorporated into a nanogel, the release of the drug into the nucleus was delayed. For in vivo investigations the nanogel drug delivery system was combined with a metronomic treatment of DOX. Low doses of free DOX were compared to equivalent DOX loaded nanogels in a xenograft mouse model. Treatment with POx based nanogels revealed a significant tumor growth inhibition and increase in survival time, while pure DOX alone had no effect on tumor progression. The biodistribution was investigated by microscopy of organs of mice and revealed a predominant localization of DOX within tumorous tissue. Thus, the POx based nanogel system revealed a therapeutic efficiency despite the low DOX concentrations and could be a promising strategy to control tumor growth with fewer side effects.

Self-Assembly of Double Hydrophilic Poly(2-ethyl-2-oxazoline)-b-poly(N-vinylpyrrolidone) Block Copolymers in Aqueous Solution

The self-assembly of a novel combination of hydrophilic blocks in water is presented, namely poly(2-ethyl-2-oxazoline)-b-poly(N-vinylpyrrolidone) (PEtOx-b-PVP). The completely water-soluble double hydrophilic block copolymer (DHBC) is formed via copper-catalyzed polymer conjugation, whereas the molecular weight of the PVP is varied in order to study the effect of block ratio on the self-assembly process. Studies via dynamic light scattering, static light scattering as well as microscopy techniques, e.g., cryo scanning electron microscopy or laser scanning confocal microscopy, show the formation of spherical particles in an aqueous solution with sizes between 300 and 400 nm. Particles of the DHBCs are formed without the influence of external stimuli. Moreover, the efficiency of self-assembly formation relies significantly on the molar ratio of the utilized blocks. The nature of the formed structures relies further on the concentration, and indications of particular and vesicular structures are found.

UV-mediated thiol-ene click reactions for the synthesis of drug-loadable and degradable gels based on copoly(2-oxazoline)s

An 80-membered library of gels composed of monofunctional 2-ethyl-2-oxazoline and 2-nonyl-2-oxazoline and one of four selected difunctional 2-oxazolines (containing either ether or ester bonds) were synthesized by microwave-assisted ring-opening polymerizations. The difunctional 2-oxazolines were prepared from the thiol-ene reaction of glycol dimercaptoacetate or 2,2'-(ethylenedioxy)diethanethiol and 2-but-3'-enyl-2-oxazoline or 2-dec-9'-enyl-2-oxazoline. 53 of the gels exhibited glass-transition temperatures, which ranged from -5.9 to 45.3 °C. 13 Derivatives exhibited glass-transition temperatures in the range from 20 to 30 °C, which renders them stiff at room temperature and flexible at body temperature. The gels that did not contain any 2-ethyl-2-oxazoline acted as lipogels, whereas the gels that did not contain any 2-nonyl-2-oxazoline acted as hydrogels; all other gels may be classified as amphigels. The swelling degrees were measured by gravimetry and maximum swelling degrees of 6 (in water) were observed for the gels with the lowest degrees of crosslinking. In a second approach, the synthesis of crosslinked networks had been achieved by performing the polymeranalogous thiol-ene reaction of copoly(2-oxazoline)s containing olefinic side-chains and glycol dimercaptoacetate. This soft strategy enabled the straightforward loading of such gels with active pharmaceutical ingredients without altering them. This method delivered gels with selected composition exhibiting a targeted disc-shape and loaded with active pharmaceutical ingredients from one-step syntheses. The maximum swelling degrees of these specimens were found to be in accordance with the ones from the first route investigated. Preliminary degradation studies were performed at 25 °C; these types of gels were found to be degraded in alkaline media as well as by esterases.

Indocyanine green-functionalized bottle brushes of poly(2-oxazoline) on cellulose nanocrystals for photothermal cancer therapy

Bottle brushes of poly(2-oxazoline) on CNCsviaUV-induced photopolymerization and living cationic ring-opening polymerization are demonstrated for efficient photothermal therapy.

Toward a detoxification fabric against nerve gas agents: guanidine-functionalized poly[2-(3-butenyl)-2-oxazoline]/Nylon-6,6 nanofibers

A novel guanidine-functionalized polymer, poly[2-(3-butenyl)-2-oxazoline] (PBuOxz), has been co-electrospun with Nylon-6,6 to form fibers that could be used for the decontamination of chemical warfare agents (CWAs).

Well-defined hyperstar copolymers based on a thiol–yne hyperbranched core and a poly(2-oxazoline) shell for biomedical applications

Well defined ‘hyperstar’ copolymers were synthesized by combining hyperbranched polymers produced by thiol–yne chemistry with poly(oxazoline)s.

From globules to crystals: a spectral study of poly(2-isopropyl-2-oxazoline) crystallization in hot water

One easy strategy to comprehend the complex folding/crystallization behaviors of proteins is to study the self-assembly process of their synthetic polymeric analogues with similar properties owing to their simple structures and easy access to molecular design. Poly(2-isopropyl-2-oxazoline) (PIPOZ) is often regarded as an ideal pseudopeptide with similar two-step crystallization behavior to proteins, whose aqueous solution experiences successive lower critical solution temperature (LCST)-type liquid-liquid phase separation upon heating and irreversible crystallization when annealed above LCST for several hours. In this paper, by microscopic observations, IR and Raman spectroscopy in combination with 2D correlation analysis, we show that the second step of PIPOZ crystallization in hot water can be further divided into two apparent stages, i.e., nucleation and crystal growth, and perfect crystalline PIPOZ chains are found to only develop in the second stage. While all the groups exhibit changes in initial nucleation, only methylene groups on the backbone participate in the crystal growth stage. During nucleation, a group motion transfer is found from the side chain to the backbone, and nucleation is assumed to be mainly driven by the cleavage of bridging C=O···D-O-D···O=C hydrogen bonds followed by chain arrangement due to amide dipolar orientation. Nevertheless, during crystal growth, a further chain ordering process occurs resulting in the final formation of crystalline PIPOZ chains with partial trans conformation of backbones and alternative side chains on the two sides. The underlying crystallization mechanism of PIPOZ in hot water we present here may provide very useful information for understanding the crystallization of biomacromolecules in biological systems.

Insights into the Pummerer synthesis of oxazolines

A rapid and simple method to access unnatural 2-substituted 5-thio oxazolines has been developed. This methodology is based on a Pummerer reaction followed by an intramolecular nucleophilic substitution, which changes the paradigm for the normal use of a base in Pummerer chemistry. We also provide a useful two-step method for the synthesis of the starting material and a mechanistic proposal based on experimental observations, which contests the previously proposed reaction pathway. The reaction proved to be general, and different substituents, such as alkyl, aryl, alkenyl and functionalized groups, can be used without a significant decrease in efficiency.

Conformational changes in the heat-induced crystallization of poly(2-isopropyl-2-oxazoline) in the solid state

Poly(2-isopropyl-2-oxazoline) (PIPOZ) with an isomeric structure of poly(N-isopropylacrylamide) (PNIPAM) represents an important class of stimuli-responsive synthetic polymers. Unlike PNIPAM, PIPOZ exhibits an unusual heat-induced crystallization behaviour at around 120 °C in the solid state, whose dynamic mechanism involving all group motions and conformational changes is still poorly understood. In this paper, IR spectroscopy in combination with two-dimensional analysis methods - the perturbation correlation moving window (PCMW) and two-dimensional correlation spectroscopy (2DCOS) - was used to monitor and study the conformational changes in the crystallization of PIPOZ in the solid state. The incorporated water molecules are found to be not necessary to assist the solid-state crystallization of the PIPOZ film. PCMW and 2DCOS analyses reveal that following the breaking of minor CH3O[double bond, length as m-dash]C hydrogen bonds, all the group moieties exhibit highly synergetic motions during crystallization, and methylene groups on the backbone do not show significant changes throughout the crystallization process. Raman spectroscopic and molecular dynamics simulation results further support this conclusion. The chain alignment of PIPOZ chains is shown to be mainly achieved by the lateral distortion of coplanar side chains or the ordered chain arrangement of amide dipoles together with the torsion of the backbone through C-N linkages. Upon heating, gauche conformations of methylene groups on the backbone are always dominating, resulting in an ordered PIPOZ chain with alternate side chains and a slightly distorted backbone.

Synthesis of D-fructose-derived spirocyclic 2-substituted-2-oxazoline ribosides

The TMSOTf-mediated synthesis of β-configured spirocyclic 2-substituted-2-oxazoline ribosides was achieved using a “Ritter-like” reaction in toluene through nucleophilic addition of electron-rich nitriles to the oxacarbenium ion intermediate of 1,2;3,4-di-O-isopropylidene-β-D-psicofuranose derivatives with concomitant intramolecular trapping of the C2 hydroxymethyl group on the electrophilic nitrilium carbon. These carbohydrate-derived spirooxazolines are stable and were obtained in good yield with high stereoselectivity due to the conformational rigidity imparted by the 3,4-isopropylidene group.