The evolution of fibrin-specific targeting strategies

Modification of adipose mesenchymal stem cells-derived small extracellular vesicles with fibrin-targeting peptide CREKA for enhanced bone repair

The process of bone repair is highly regulated by a large number of bioactive factors. Thus, a “cocktail” of bioactive factors supplemented to the defect sites is desirable for bone repair. In this regard, small extracellular vesicles (sEVs) derived from mesenchymal stem cells hold great potential in tissue repair. Nevertheless, the poor homing and retention of sEVs greatly limited their possible clinical application. In the present work, DMPE-PEG-CREKA was inserted into the membrane of sEVs released from adipose-derived mesenchymal stem cells to obtain CREKA functionalized sEVs (CREKA-sEVs), which could target fibrin to accumulate and retain in bone defects. Our results showed that CREKA-sEVs, like sEVs, promoted the osteogenic differentiation of BMSCs, the angiogenic property of HUVECs, and modulated the polarization of macrophages in vitro. Furthermore, due to the improved fibrin-binding and retention capacity of CREKA-sEVs, they enhanced the bone repair substantially in the rat femoral defect model. This study provided a new strategy to improve the therapeutic efficiency of sEVs and showed that CREKA-sEVs had great application value in bone tissue repair.

•

The poor homing and retention capacity greatly limited the possible clinical application of sEVs derived from MSCs.

•

CREKA modification enabled sEVs to bind fibrin effectively and promoted their accumulation and retention in bone defects.

•

CREKA-sEVs enhanced bone repair substantially in the rat femoral defect model.

Biomaterials-Enabled Antithrombotics: Recent Advances and Emerging Strategies

Antithrombotic and thrombolytic therapies are used to prevent, treat, and remove blood clots in various clinical settings, from emergent to prophylactic. While ubiquitous in their healthcare application, short half-lives, off-target effects, overdosing complications, and patient compliance continue to be major liabilities to the utility of these agents. Biomaterials-enabled strategies have the potential to comprehensively address these limitations by creating technologies that are more precise, durable, and safe in their antithrombotic action. In this review, we discuss the state of the art in anticoagulant and thrombolytic biomaterials, covering the nano to macro length scales. We emphasize current methods of formulation, discuss how material properties affect controlled release kinetics, and summarize modern mechanisms of clot-specific drug targeting. The preclinical efficacy of these technologies in an array of cardiovascular applications, including stroke, pulmonary embolism, myocardial infarction, and blood contacting devices, is summarized and performance contrasted. While significant advances have already been made, ongoing development efforts look to deliver bioresponsive "smart" biomaterials that will open new precision medicine opportunities in cardiology.

Engineered Molecular Therapeutics Targeting Fibrin and the Coagulation System: a Biophysical Perspective

The coagulation cascade represents a sophisticated and highly choreographed series of molecular events taking place in the blood with important clinical implications. One key player in coagulation is fibrinogen, a highly abundant soluble blood protein that is processed by thrombin proteases at wound sites, triggering self-assembly of an insoluble protein hydrogel known as a fibrin clot. By forming the key protein component of blood clots, fibrin acts as a structural biomaterial with biophysical properties well suited to its role inhibiting fluid flow and maintaining hemostasis. Based on its clinical importance, fibrin is being investigated as a potentially valuable molecular target in the development of coagulation therapies. In this topical review, we summarize our current understanding of the coagulation cascade from a molecular, structural and biophysical perspective. We highlight single-molecule studies on proteins involved in blood coagulation and report on the current state of the art in directed evolution and molecular engineering of fibrin-targeted proteins and polymers for modulating coagulation. This biophysical overview will help acclimatize newcomers to the field and catalyze interdisciplinary work in biomolecular engineering toward the development of new therapies targeting fibrin and the coagulation system.

The choice of targets and ligands for site-specific delivery of nanomedicine to atherosclerosis

As nanotechnologies advance into clinical medicine, novel methods for applying nanomedicine to cardiovascular diseases are emerging. Extensive research has been undertaken to unlock the complex pathogenesis of atherosclerosis. However, this complexity presents challenges to develop effective imaging and therapeutic modalities for early diagnosis and acute intervention. The choice of ligand-receptor system vastly influences the effectiveness of nanomedicine. This review collates current ligand-receptor systems used in targeting functionalized nanoparticles for diagnosis and treatment of atherosclerosis. Our focus is on the binding affinity and selectivity of ligand-receptor systems, as well as the relative abundance of targets throughout the development and progression of atherosclerosis. Antibody-based targeting systems are currently the most commonly researched due to their high binding affinities when compared with other ligands, such as antibody fragments, peptides, and other small molecules. However, antibodies tend to be immunogenic due to their size. Engineering antibody fragments can address this issue but will compromise their binding affinity. Peptides are promising ligands due to their synthetic flexibility and low production costs. Alongside the aforementioned binding affinity of ligands, the choice of target and its abundance throughout distinct stages of atherosclerosis and thrombosis is relevant to the intended purpose of the nanomedicine. Further studies to investigate the components of atherosclerotic plaques are required as their cellular and molecular profile shifts over time.

Targeted Molecular Imaging of Cardiovascular Diseases by Iron Oxide Nanoparticles

Cardiovascular disease is one of the major contributors to global disease burden. Atherosclerosis is an inflammatory process that involves the accumulation of lipids and fibrous elements in the large arteries, forming an atherosclerotic plaque. Rupture of unstable plaques leads to thrombosis that triggers life-threatening complications such as myocardial infarction. Current diagnostic methods are invasive as they require insertion of a catheter into the coronary artery. Molecular imaging techniques, such as magnetic resonance imaging, have been developed to image atherosclerotic plaques and thrombosis due to its high spatial resolution and safety. The sensitivity of magnetic resonance imaging can be improved with contrast agents, such as iron oxide nanoparticles. This review presents the most recent advances in atherosclerosis, thrombosis, and myocardial infarction molecular imaging using iron oxide-based nanoparticles. While some studies have shown their effectiveness, many are yet to undertake comprehensive testing of biocompatibility. There are still potential hazards to address and complications to diagnosis, therefore strategies for overcoming these challenges are required.

Au-Cu@PANI Alloy Core Shells for Aerobic Fibrin Degradation under Visible Light Exposure

Fibrin plays a critical role in wound healing and hemostasis, yet it is also the main case of cardiovascular diseases and thrombosis. Here, we show the unique design of Au-Cu@PANI alloy core-shell rods for fibrin clot degradation. Microscopic (transmission electron microscopy (TEM), scanning transmission electron microscopy-energy-dispersive X-ray (STEM-EDX)) and structural characterizations (powder X-ray diffraction (PXRD), X-ray photoelectron spectroscopy (XPS)) of the Au-Cu@PANI hybrid material reveal the formation of Au-Cu heterogeneous alloy core rods (aspect ratio = 3.7) with thin Cu₂O and PANI shells that create a positive surface charge (ζ-potential = +22 mV). This architecture is supported by the survey XPS spectrum showing the presence of Cu 2p, N 1s, and C 1s features with binding energies of 934.8, 399.7, and 284.8 eV, respectively. Upon photolysis (λ ≥ 495 or 590 nm), these hybrid composite nanorods provide sufficient excited-state redox potential to generate reactive oxygen species (ROS) for degradation of model fibrin clots within 5-7 h. Detailed scanning electron microscopy (SEM) analysis of the fibrin network shows significant morphology modification including formation of large voids and strand termini, indicating degradation of fibrin protofibril by Au-Cu@PANI. The dye 1,3-diphenylisobenzofuran (DPBF) used to detect the presence of ¹O₂ shows a 27% bleaching of the absorption at λ = 418 nm within 75 min of irradiation of an aqueous Au-Cu@PANI solution in air. Moreover, electron paramagnetic resonance (EPR) spin-trapping experiments reveal a hyperfine-coupled triplet signature at room temperature with intensities 1:1:1: and g-value = 2.0057, characteristic of the reaction between the spin probe 4-Oxo-TEMP and ¹O₂ during irradiation. Controlled ¹O₂ scavenging experiments by NaN₃ show 82% reduction in the spin-trapped EPR signal area. Both DPBF bleaching and EPR spin trapping indicate that in situ generated ¹O₂ is responsible for fibrin strand scission. This unique nanomaterial function via use of ubiquitous oxygen as a reagent could open creative avenues for future in vivo biomedical applications to treat fibrin clot diseases.

Identification of and solution for false D-dimer results

BACKGROUND

Clinically, D-dimer (DD) levels are mainly used to exclude diseases such as deep venous thrombosis (DVT). In clinical testing, DD assays can be subjected to interference that may cause false results, which directly affect the clinical diagnosis. Our hypothesis was that the 95% confidence intervals (CIs) of the fibrin degradation product (FDP)/DD and fibrinogen (Fib)/DD ratios were used to identify these false results and corrected via multiple dilutions.

METHODS

In total, 16 776 samples were divided into three groups according to the DD levels detected by Sysmex CS5100 and CA7000: Group A, DD ≥ 2.0 μg/mL fibrinogen equivalent unit (FEU); group B, 0.5 < DD < 2.0 μg/mL FEU; and group C, DD ≤ 0.5 μg/mL FEU. The 95% CIs of the FDP/DD and Fib/DD ratios were calculated. Six abnormal DD results were found according to the 95% CIs. For verification, we performed multiple dilutions, compared the results with those of other instruments, and tested the addition of heterophilic blocking reagent (HBR).

RESULTS

The median and 95% CI of the FDP/DD ratio were 3.76 and 2.25-8.15 in group A, 5.63 and 2.86-10.58 in group B, 10.23 and 0.91-47.71 in groups C, respectively. For the Fib/DD ratio, the 95% CIs was 0.02-2.21 in group A, 0.68-8.15 in group B, and 3.82-55.27 in groups C. Six abnormal results were identified after multiple dilutions, by comparison with other detection systems, and after HBR addition.

CONCLUSIONS

The FDP/DD ratio is more reliable for identifying false results. If the FDP/DD ratio falls outside the 95% CI, it should be verified by different methods.

Fibrin Matrices as (Injectable) Biomaterials: Formation, Clinical Use, and Molecular Engineering

This review focuses on fibrin, starting from biological mechanisms (its production from fibrinogen and its enzymatic degradation), through its use as a medical device and as a biomaterial, and finally discussing the techniques used to add biological functions and/or improve its mechanical performance through its molecular engineering. Fibrin is a material of biological (human, and even patient's own) origin, injectable, adhesive, and remodellable by cells; further, it is nature's most common choice for an in situ forming, provisional matrix. Its widespread use in the clinic and in research is therefore completely unsurprising. There are, however, areas where its biomedical performance can be improved, namely achieving a better control over mechanical properties (and possibly higher modulus), slowing down degradation or incorporating cell-instructive functions (e.g., controlled delivery of growth factors). The authors here specifically review the efforts made in the last 20 years to achieve these aims via biomimetic reactions or self-assembly, as much via formation of hybrid materials.

Ocular adhesives: Design, chemistry, crosslinking mechanisms, and applications

Closure of ocular wounds after an accident or surgery is typically performed by suturing, which is associated with numerous potential complications, including suture breakage, inflammation, secondary neovascularization, erosion to the surface and secondary infection, and astigmatism; for example, more than half of post-corneal transplant infections are due to suture related complications. Tissue adhesives provide promising substitutes for sutures in ophthalmic surgery. Ocular adhesives are not only intended to address the shortcomings of sutures, but also designed to be easy to use, and can potentially minimize post-operative complications. Herein, recent progress in the design, synthesis, and application of ocular adhesives, along with their advantages, limitations, and potential are discussed. This review covers two main classes of ocular adhesives: (1) synthetic adhesives based on cyanoacrylates, polyethylene glycol (PEG), and other synthetic polymers, and (2) adhesives based on naturally derived polymers, such as proteins and polysaccharides. In addition, different technologies to cover and protect ocular wounds such as contact bandage lenses, contact lenses coupled with novel technologies, and decellularized corneas are discussed. Continued advances in this area can help improve both patient satisfaction and clinical outcomes.

What makes D-dimer assays suspicious-heterophilic antibodies?

BACKGROUND

Heterophilic antibodies are still an important source of interference in immunoassays, but reports of interference with D-dimers are rare. Are D-dimer level abnormalities, found in the clinic, caused by heterophilic antibodies as well, or are other mechanisms involved? We will elaborate on this issue through two different examples in this article.

METHODS

Serum from two patients with significantly elevated levels of D-dimers were measured and compared by different methods, diluted, and dealt with heterophilic antibody blockers. At the same time, to retrieve the interference, we focused on the cause of D-dimer false positives and made a systematic review of the literature.

RESULTS

The D-dimer values were normal (0.49 and 0.15 μg/mL) detected with different testing method and decreased after addition of heterophilic antibody blocking reagent. According to literature data, there were 66.7% (4/6) references showed the interference were heterophilic antibody.

CONCLUSIONS

The influence of heterophilic antibodies on the measurement of D-dimers remains a big challenge. Different measuring instruments and methods may have significant differences in the measurement of D-dimers. By using a combination of instrumental methods for measuring, incorporating heterophilic antibody blockers, and combining with clinical performance and imaging data, most of the interference can be eliminated.

Enhancing clot properties through fibrin-specific self-cross-linked PEG side-chain microgels

Excessive bleeding and resulting complications are a major cause of death in both trauma and surgical settings. Recently, there have been a number of investigations into the design of synthetic hemostatic agents with platelet-mimicking activity to effectively treat patients suffering from severe hemorrhage. We developed platelet-like particles from microgels composed of polymers carrying polyethylene glycol (PEG) side-chains and fibrin-targeting single domain variable fragment antibodies (PEG-PLPs). Comparable to natural platelets, PEG-PLPs were found to enhance the fibrin network formation in vitro through strong adhesion to the emerging fibrin clot and physical, non-covalent cross-linking of nascent fibrin fibers. Furthermore, the mechanical reinforcement of the fibrin mesh through the incorporation of particles into the network leads to a ∼three-fold decrease of the overall clot permeability as compared to control clots. However, transport of biomolecules through the fibrin clots, such as peptides and larger proteins is not hindered by the presence of PEG-PLPs and the altered microstructure. Compared to control clots with an elastic modulus of 460+/-260 Pa, PEG-PLP-reinforced fibrin clots exhibit higher degrees of stiffness as demonstrated by the significantly increased average Younǵs modulus of 1770 +/±720 Pa, as measured by AFM force spectroscopy. Furthermore, in vitro degradation studies with plasmin demonstrate that fibrin clots formed in presence of PEG-PLPs withstand hydrolysis for 24 h, indicating enhanced stabilization against exogenous fibrinolysis. The entire set of data suggests that the designed platelet-like particles have high potential for use as hemostatic agents in emergency medicine and surgical settings.

Photodynamic Therapy

Photodynamic therapy is a clinical technique for the treatment of cancers, microbial infections and other medical conditions by means of light-induced generation of reactive oxygen species using photosensitising drugs. The intrinsic fluorescence of many such drugs make them potential theranostic agents for simultaneous diagnosis and therapy. This chapter reviews the basic chemical and biological aspects of photodynamic therapy with an emphasis on its applications in theranostics. The roles of nanotechnology is highlighted, as well as emerging trends such as photoimmunotherapy, image-guided surgery and light- and singlet-oxygen dosimetry.

Preparation of high-quality graphene with a large-size by sonication-free liquid-phase exfoliation of graphite with a new mechanism

We report on the successful preparation of high-quality graphene with a large-size by sonication-free liquid-phase exfoliation of graphite.