Crystallographic plane-induced selective mineralization of nanohydroxyapatite on fibrous-grained titanium promotes osteointegration and biocorrosion resistance

The (002) crystallographic plane-oriented hydroxyapatite (HA) and anatase TiO2 enable favorable hydrophilicity, osteogenesis, and biocorrosion resistance. Thus, the crystallographic plane control in HA coating and crystalline phase control in TiO2 is vital to affect the surface and interface bioactivity and biocorrosion resistance of titanium (Ti) implants. However, a corresponding facile and efficient fabrication method is absent to realize the HA(002) mineralization and anatase TiO2 formation on Ti. Herein, we utilized the predominant Ti(0002) plane of the fibrous-grained titanium (FG Ti) to naturally form anatase TiO2 and further achieve a (002) basal plane oriented nanoHA (nHA) film through an in situ mild hydrothermal growth strategy. The formed FG Ti-nHA(002) remarkably improved hydrophilicity, mineralization, and biocorrosion resistance. Moreover, the nHA(002) film reserved the microgroove-like topological structure on FG Ti. It could enhance osteogenic differentiation through promoted contact guidance, showing one order of magnitude higher expression of osteogenic-related genes. On the other hand, the nHA(002) film restrained the osteoclast activity by blocking actin ring formation. Based on these capacities, FG Ti-nHA(002) improved new bone growth and binding strength in rabbit femur implantation, achieving satisfactory osseointegration within 2 weeks.

Morphology-Dependent Immunomodulatory Coating of Hydroxyapatite/PEO for Magnesium-Based Bone Implants

One of the most critical issues concerning orthopedic implants is the risk of chronic inflammation, which poses a threat to the bone healing process. Osteo-immunomodulation plays a pivotal role in implant technology by influencing proinflammatory and anti-inflammatory responses, ultimately promoting bone healing. This study aims to investigate the morphology-dependent osteo-immunomodulatory properties of a hydroxyapatite (HA)/plasma electrolytic oxidation (PEO)-coated WE43 alloy. In this context, following the PEO process with various operational parameters (duty cycles of 50-40, 50-20, 70-40%, and frequencies of 0.5, 0.8, and 1 kHz), a layer of HA was applied as the top coating using a straightforward hot-dip process. The results revealed the formation of the PEO layer with distinct morphologies and pore sizes, depending on the operational parameters. Specifically, a uniform PEO coating with small pore sizes (5.2-5.3 μm) led to the creation of plate-like HA particles, while a random-like HA structure formed on nonuniform surfaces with large pores (7.0-11.1 μm) of PEO. Moreover, it was observed that the plate-like HA coating exhibited higher adhesion strength than the random one (classified as class 2 vs class 3 based on cross-cut standards). Furthermore, electrochemical impedance spectroscopy (EIS) and polarization studies confirmed a substantial increase in the polarization resistance (680 kΩ) and total impedance (48 559.6 Ω) for the plate-like HA/PEO as compared to the substrate (an increase of 1511-fold and 311-fold, respectively) and the random HA/PEO samples (an increase of 85-fold and 18-fold, respectively). In addition, compared to random HA coatings, there was a significant enhancement in the viability (150% control vs 96% control), proliferation, and differentiation of MG63 cells when exposed to plate-like HA coatings. Moreover, surface morphology and chemistry pronouncedly impacted macrophages' viability, morphology, and phenotype. Notably, plate-like HA coatings resulted in a higher upregulation of BMP-2 and TGF-β than proinflammatory cytokines (IL-6 and M-CSF), indicating a polarization of macrophage type 1 (M1) toward type 2 (M2). In summary, the bilayer HA/PEO coating exhibited remarkable osteo-immunomodulatory activity, making it highly appealing for use in bone implant applications.

Fabrication of Multilayered Biofunctional Material with an Enamel-like Structure

The oral cavity is an environment with diverse bacteria; thus, antibacterial materials are crucial for treating and preventing dental diseases. There is a high demand for materials with an enamel-like architecture because of the high failure rate of dental restorations, due to the physical differences between dental materials and enamel. However, recreating the distinctive apatite composition and hierarchical architecture of enamel is challenging. The aim of this study was to synthesize a novel material with an enamel-like structure and antibacterial ability. We established a non-cell biomimetic method of evaporation-based bottom-up self-assembly combined with a layer-by-layer technique and introduced an antibacterial agent (graphene oxide) to fabricate a biofunctional material with an enamel-like architecture and antibacterial ability. Specifically, enamel-like graphene oxide-hydroxyapatite crystals, formed on a customized mineralization template, were assembled into an enamel-like prismatic structure with a highly organized orientation preferentially along the c-axis through evaporation-based bottom-up self-assembly. With the aid of layer-by-layer absorption, we then fabricated a bulk macroscopic multilayered biofunctional material with a hierarchical enamel-like architecture. This enamel-inspired biomaterial could effectively resolve the problem in dental restoration and brings new prospects for the synthesis of other enamel-inspired biomaterials.

Calcium Orthophosphate (CaPO4)-Based Bioceramics: Preparation, Properties, and Applications

Various types of materials have been traditionally used to restore damaged bones. In the late 1960s, a strong interest was raised in studying ceramics as potential bone grafts due to their biomechanical properties. A short time later, such synthetic biomaterials were called bioceramics. Bioceramics can be prepared from diverse inorganic substances, but this review is limited to calcium orthophosphate (CaPO4)-based formulations only, due to its chemical similarity to mammalian bones and teeth. During the past 50 years, there have been a number of important achievements in this field. Namely, after the initial development of bioceramics that was just tolerated in the physiological environment, an emphasis was shifted towards the formulations able to form direct chemical bonds with the adjacent bones. Afterwards, by the structural and compositional controls, it became possible to choose whether the CaPO4-based implants would remain biologically stable once incorporated into the skeletal structure or whether they would be resorbed over time. At the turn of the millennium, a new concept of regenerative bioceramics was developed, and such formulations became an integrated part of the tissue engineering approach. Now, CaPO4-based scaffolds are designed to induce bone formation and vascularization. These scaffolds are usually porous and harbor various biomolecules and/or cells. Therefore, current biomedical applications of CaPO4-based bioceramics include artificial bone grafts, bone augmentations, maxillofacial reconstruction, spinal fusion, and periodontal disease repairs, as well as bone fillers after tumor surgery. Prospective future applications comprise drug delivery and tissue engineering purposes because CaPO4 appear to be promising carriers of growth factors, bioactive peptides, and various types of cells.

Recent Progress of Rare Earth Doped Hydroxyapatite Nanoparticles: Luminescence Properties, Synthesis and Biomedical Applications

Hydroxyapatite nanoparticles (HAP NPs) are host materials and can be modified with various substrates and dopants. Among them, rare earth (RE) ions doped HAP NPs have gathered attention due to their unique physicochemical and imaging properties. Compared to other fluorescence probes, RE-doped HAP NPs display advantages in high brightness, high contrast, photostability, nonblinking, and narrow emission bands. Meanwhile, their intrinsic features (composition, morphology, size, crystallinity, and luminescence intensity) can be adjusted by changing the dopant ratio, synthesizing temperature, reaction time, and techniques. And they have been used in various biomedical applications, including imaging probe, drug delivery, bone tissue engineering, and antibacterial studies. This review surveys the luminescent properties, fluorescence enhancement, synthetic methods, and biocompatibility of various RE-doped HAP NPs consolidated from different research works, for their employments in biomedical applications. For this literature review, an electronic search was conducted in the Pubmed, Web of Science, Google Scholar, Scopus and SciFinder databases, using the keywords: hydroxyapatite, rare earth, lanthanide, fluorescence, and imaging. Literature searches of English-language publications from 1979 with updates through April, 2022, and a total of 472 potential papers were identified. In addition, a few references were located by noting their citation in other studies reviewed. STATEMENT OF SIGNIFICANCE: Hydroxyapatite nanoparticles (HAP NPs) have a broad range of promising biological applications. Although prospective biomedical applications are not limited to rare earth-doped hydroxyapatite nanoparticles (RE-doped HAP NPs), some cases do make use of the distinctive features of RE-elements to achieve the expected functions for HAP families. This review surveys the luminescent properties, synthetic methods, and biocompatibility of various RE-doped HAP NPs consolidated from different research works, for their employments in biomedical applications, including imaging probe, drug delivery, bone tissue repair and tracking, and anti-bacteria. Overall, we expect to shed some light on broadening the research and application of RE-doped HAP NPs in biomedical field.

Engineering a Bioactive Hybrid Coating for In Vitro Corrosion Control of Magnesium and Its Alloy

Magnesium (Mg) and its alloys are promising biodegradable metallic implant materials. However, their clinical applications are limited by their fast corrosion rate in the biological environment. In this work, with an outlook to improve the in vitro corrosion resistance of Mg and WE43 Mg alloy, a layer-by-layer interfacially engineered anticorrosive and bioactive coating consisting of a natural oxide lower layer, hydroxyapatite (HA) middle layer, and silk fibroin (SF) top layer was fabricated and investigated. Anodization was used to create natural oxide layer induced microroughness on substrates. The electrochemically deposited HA layer improved the surface microroughness and microhardness but significantly decreased Mg ion release, hydrogen gas evolution, and weight loss in simulated body fluid. The spin-coated SF layer further decreased hydrophilicity, in vitro degradation, and corrosion rate. The nonspecific and specific intermolecular interactions between fabricated layers along with their mechanical interlocking interface contributed to improved adhesion strength and integrity of the coating. The SF+HA-coated samples showed enhanced degradation and corrosion resistance due to a synergistic effect of the underlying HA layer, hindering the ingress of aggressive ions and the top hydrophobic SF layer, preventing the ingress of corrosive solution. The SF+HA-coated Mg and WE43 Mg alloy samples exhibited 50 and 26 times decreased corrosion rate, respectively, compared to uncoated samples. Moreover, in vitro cytotoxicity and cell culture studies using a mouse fibroblast cell showed that the SF+HA hybrid coating improved the cell viability, attachment, and proliferation, with cells exhibiting elongated morphology on coated samples as compared to a round shape on uncoated samples.

Potential of discarded sardine scales (Sardina pilchardus) as chitosan sources

The random discharge of marine fish waste into the coast generates environmental pollution. However, a better valorization of these by-products leads to the extraction of sustainable biomolecules. Chitosan is a natural biopolymer that can be produced from various marine by-products, in particular the crustacean shells, crabs, and fish scales. The aim of this current study is the extraction of chitin and characterization of chitosan obtained after a deacetylation reaction from sardine scales (S. pilchardus) as a new marine source. The β form of chitin extracted undergoes deacetylation in 40% NaOH at 121°C for 20 min. The chemical structure of obtained chitosan was characterized based on Fourier transforms infrared spectroscopy (FTIR), X-ray powder diffraction (XRD), Scanning electron microscope (SEM), and Energy-dispersive X-ray spectroscopy (EDS). The physicochemical properties of obtained chitosan such as the ash, moisture, nitrogen, solubility, molecular weight, fat, and water-binding capacity were also determined. According to the results of FTIR and XRD analysis, the degree of deacetylation (DDA), and the crystalline index (CrI) value of obtained chitosan is respectively about 87% and 95%. The SEM and EDS analysis revealed respectively fibrillar and pleated morphology with the presence of three major elements characterizing the chitosan, which are C, O, and N. The physicochemical analysis showed that the rate of ash, moisture, and nitrogen in obtained chitosan were respectively about 0.10, 0.34, and 7%. The solubility, molecular weight, fat, and water-binding capacity of produced chitosan were found to be 93%, 5.86 kDa, 310, and 510% respectively. Sardina pilchardus scales could be considered a promising and alternative source of chitin and chitosan, which will be applicable in a large number of fields. Implications: Direct rejection of marine biowaste as fish scales in nature, port, or fish processing plants, is a dramatic problem that is growing day after day. These uncontrollable discharges cause marine pollution and promote bacterial growth, which leads to a degradation of the soil and air quality. Taking into account the objectives of sustainable development, better development of these by-products would make it possible to produce valuable biomaterials that will be applied in various fields and which have benefits for the environment and humans. The central objective of this research is accentuated on the enhancement of Sardina pilchardus scales; by the conversion of chitin into chitosan and the determination of its physicochemical characterization. The obtained chitosan from Sardina pilchardus scales could be applied in the agricultural and food industry.

Periodic Surface-Ring Pattern Formation for Hydroxyapatite Thin Films Formed by Biomineralization-Inspired Processes

Surface morphology is a key factor that might significantly influence the properties of biomaterials. In this study, periodic surface-ring structures have been constructed for calcium phosphate thin films via biomineralization-inspired crystallization process. The patterned octacalcium phosphate crystals have been obtained on poly(2-hydroxyethyl methacrylate) (PHEMA) matrix in the presence of poly(acrylic acid) (PAA). The patterned surface morphologies of the crystal thin films could be tuned by the amount of PAA additives. In addition, the rapid and topotactic transformation to hydroxyapatite (HAP) thin films with surface-ring structures has also been achieved. This study may provide new strategy toward the design of functional calcium phosphate-based thin-film hybrids.

Improved rhBMP-2 function on MBG incorporated TiO2 nanorod films

In the process of biomaterials mediated bone regeneration, rhBMP-2 delivery at efficient dose in sustained kinetics is crucial for promoting cell osteogenic differentiation. Meanwhile, surface morphology of the biomaterials could regulate cellular responses as well as strengthen the rhBMP-2 interaction with cells for better bone induction. Herein, TiO₂ nanorod films with varied mesoporous bioactive glass (MBG) incorporation amount were designed to strengthen the efficacy of rhBMP-2, basing on optimized loading/release behaviors and surface nanostructure cooperatively. The MBG incorporation improved rhBMP-2 loading amount and regulated its release behavior. Consequently, the osteogenic differentiation of bone marrow-derived mesenchymal stem cells (BMSCs) on the incorporated films was extremely enhanced, and the incorporated nanorod film with 200nm MBG thickness exhibited the best osteoinduction effect. However, MBG film and the incorporated nanorod film had the same loading amount of rhBMP-2, the latter showed a much higher expression of 7-day osteogenic differentiation index than the former, which could be attributed to the synergistic effect of optimized rhBMP-2 release behavior and surface morphology. The MBG incorporated TiO₂ nanorod films here presents a promising strategy for enhancing osteoinduction through optimized rhBMP-2 release behavior.

Strontium hydroxyapatite/chitosan nanohybrid scaffolds with enhanced osteoinductivity for bone tissue engineering

For the clinical application of bone tissue engineering with the combination of biomaterials and mesenchymal stem cells (MSCs), bone scaffolds should possess excellent biocompatibility and osteoinductivity to accelerate the repair of bone defects. Herein, strontium hydroxyapatite [SrHAP, Ca_10-xSr_x(PO₄)₆(OH)₂]/chitosan (CS) nanohybrid scaffolds were fabricated by a freeze-drying method. The SrHAP nanocrystals with the different x values of 0, 1, 5 and 10 are abbreviated to HAP, Sr1HAP, Sr5HAP and Sr10HAP, respectively. With increasing x values from 0 to 10, the crystal cell volumes and axial lengths of SrHAP become gradually large because of the greater ion radius of Sr²⁺ than Ca²⁺, while the crystal sizes of SrHAP decrease from 70.4nm to 46.7nm. The SrHAP/CS nanohybrid scaffolds exhibits three-dimensional (3D) interconnected macropores with pore sizes of 100-400μm, and the SrHAP nanocrystals are uniformly dispersed within the scaffolds. In vitro cell experiments reveal that all the HAP/CS, Sr1HAP/CS, Sr5HAP/CS and Sr10HAP/CS nanohybrid scaffolds possess excellent cytocompatibility with the favorable adhesion, spreading and proliferation of human bone marrow mesenchymal stem cells (hBMSCs). The Sr5HAP nanocrystals in the scaffolds do not affect the adhesion, spreading of hBMSCs, but they contribute remarkably to cell proliferation and osteogenic differentiation. As compared with the HAP/CS nanohybrid scaffold, the released Sr²⁺ ions from the SrHAP/CS nanohybrid scaffolds enhance alkaline phosphatase (ALP) activity, extracellular matrix (ECM) mineralization and osteogenic-related COL-1 and ALP expression levels. Especially, the Sr5HAP/CS nanohybrid scaffolds exhibit the best osteoinductivity among four groups because of the synergetic effect between Ca²⁺ and Sr²⁺ ions. Hence, the Sr5HAP/CS nanohybrid scaffolds with excellent cytocompatibility and osteogenic property have promising application for bone tissue engineering.

A carboxymethyl chitosan and peptide-decorated polyetheretherketone ternary biocomposite with enhanced antibacterial activity and osseointegration as orthopedic/dental implants

Carbon fiber-reinforced polyetheretherketone (CFRPEEK) possesses biomechanical properties such as elastic modulus similar to human bones and is becoming a dominant alternative to replace the traditional metallic implants. The defective osseointegration and bacterial infection risk of CFRPEEK, however, impede its clinical adoption. In the current study, a newly-developed carbon fiber-reinforced polyetheretherketone/nanohydroxyapatite (CFRPEEK/n-HA) ternary biocomposite was functionalized by covalently grafting carboxymethyl chitosan (CMC) followed by the decoration of a bone-forming peptide (BFP) assisted via the polydopamine tag strategy. Antibacterial test with Staphylococcus aureus (S. aureus) indicated that the CMC and peptide-conjugated substrates (pep-CMC-CFRPEEK/n-HA) significantly suppressed bacterial adhesion. In vitro cell attachment/growth, spreading assay, alkaline phosphatase activity, real-time PCR analysis, osteogenesis-related protein expression and calcium mineral deposition all disclosed greatly accelerated adhesion, proliferation and osteo-differentiation of human mesenchymal stem cells (hMSCs) on the pep-CMC-CFRPEEK/n-HA biocomposite due to the additive effect of the CMC polysaccharide and the small osteoinductive peptide. More importantly, in vivo evaluation of the beagle tibia model by means of micro-CT, histological analysis, SEM observation and fluorescent labeling confirmed the remarkably boosted bioactivity and osteointegration. The CFRPEEK/n-HA ternary composite with the dual functions of bacterial adhesion reduction and osteointegration promotion holds great potential as a bioactive implant material in orthopedic/dental applications based on this scheme.

Facile synthesis of dental enamel-like hydroxyapatite nanorod arrays via hydrothermal transformation of hillebrandite nanobelts

Biomimetic dental enamel-like hydroxyapatite (HAp) nanorod arrays were facilely synthesized via hydrothermal treatment of the hillebrandite nanobelts as hard-templates in trisodium phosphate aqueous solution.