A novel reflectance-based aptasensor using gold nanoparticles for the detection of oxytetracycline

Colorimetric aptasensor utilizing MOF-235 with exceptional peroxidase-like activity for the detection of oxytetracycline residues in raw milk

In this work, a simple, convenient and cost-effective colorimetric aptasensor was successfully constructed for the detection of antibiotic residues in raw milk based on the property that aptamer (Apt) synergistically enhances the catalase-like activity of MOF-235. Under optimised conditions, the proposed colorimetric aptasensor exhibited a wide detection range (15-1500 nM) with a low detection limit (6.92 nM). Furthermore, the proposed aptasensor demonstrated high selectivity, good resistance to interference and storage stability. The proposed aptasensor was validated by spiking recovery in camel milk, cow milk and goat milk with satisfactory recoveries, which demonstrated the great potential of the aptasensor for further application in real food samples, and also suggested that MOF-235 can be used as a potential universal platform to build a sensitive detection platform for other targets.

A water-stabilized Tb-MOF can be used as a sensitive and selective fluorescence sensor for the detection of oxytetracycline hydrochloride

Oxytetracycline hydrochloride (OTC) is a commonly used over-the-counter antibiotic, valued for its potent antibacterial properties. However, the inappropriate and excessive use of OTC can result in the accumulation of the drug in both the environment and human body, causing significant harm to ecosystems and human health. Therefore, the development of a fast and sensitive method for detecting OTC is of great significance. Lanthanide metal-organic frameworks (LnMOFs) can effectively excite lanthanide metals to emit long-lifetime, narrow and stable fluorescence based on the antenna effect, but their application in fluorescence sensing is rarely reported. In this work, a strongly fluorescent material Tb-MOF was synthesized by a facile solvothermal method using 1,2,4,5-phenylenetetracarboxylic acid (H4btec) and 1,10-phenanthroline (1,10-phen) as organic ligands and lanthanide metal Tb as the luminescent center. Tb-MOF is a stable material in water and shows excellent linearity with OTC in the concentration range of 0 ∼ 70 μM, with low detection limit (0.12 μM) and luminescence color transition from bright green to dark green during the detection process. X-ray diffraction, UV-vis absorption and fluorescence lifetime analyses revealed that the fluorescence quenching of Tb-MOF by OTC is caused by the inner filter effect in static quenching. Test strips for OTC detection were successfully prepared using Tb-MOF. These strips are not only low cost and easy to prepare but can also be used as portable sensing devices that can be easily distinguished by the naked eye during OTC testing. This study not only presents a fluorescent probe for the detection of OTC in water but also offers a practical method for converting fluorescent luminescent materials into functional devices for OTC detection.

Advances and perspectives of aptasensors for the detection of tetracyclines: A class of model compounds of food analysis

The residual tetracyclines in food are frequently applied as the model compounds to develop aptasensors. Until now, more than 100 advanced aptasensors towards tetracyclines have been developed and published in English. This review summarizes and discusses comprehensively these advanced aptasensors, in terms of the principle designs, applied frontier transducers/materials, working performance, and advantages/disadvantages. The aptasensors are classified according to the inherent transduction techniques, i.e., optics, optics-electricity, optics-mass, and electricity-mass. Moreover, the present challenges such as the limited specificity and limited affinity of the aptamers, the future prospects and trends such as further combination with other advanced materials and technologies, and the urgent need of expanding the practical application were discussed and prospected. We hope this review can serve as a powerful tool for both tracing the development progresses of aptasensors and providing adequate references for further development of aptasensing methods for food-related analytes.

Recent advances in biosensors for antibiotic detection: Selectivity and signal amplification with nanomaterials

Antibiotics are widely used in the prevention and treatment of infectious diseases in animals due to its bactericidal or bacteriostatic action. Residual antibiotics and their metabolites pose great threats to human and animal health, such as potential carcinogenic and mutagenic effects, and bacterial resistances. Therefore, it is necessary and urgent to accurately monitor trace amounts of antibiotics in food samples. Up to now, many analytical methods have been reported for the determination of antibiotics. Biosensors with the advantages of high sensitivity, rapid response, easy miniaturization, and low price have been widely applied to the detection of antibiotics residues in past decades. This review offered an in-depth evaluation of recognition elements for antibiotic residues in diverse food matrices. In addition, it presented a systematical and critical review on signal amplification via various materials, focusing on recently developed nanomaterials. Finally, the review provided an outlook on the future concepts to help upgrade the sensing techniques for antibiotics in food.

Advances in Gold Nanoparticles-Based Colorimetric Aptasensors for the Detection of Antibiotics: An Overview of the Past Decade

Misuse of antibiotics has recently been considered a global issue because of its harmful effects on human health. Since conventional methods have numerous limitations, it is necessary to develop fast, simple, sensitive, and reproducible methods for the detection of antibiotics. Among numerous recently developed methods, aptasensors are fascinating because of their good specificity, sensitivity and selectivity. These kinds of biosensors combining aptamer with colorimetric applications of gold nanoparticles to recognize small molecules are becoming more popular owing to their advantageous features, for example, low cost, ease of use, on-site analysis ability using naked eye and no prerequisite for modern equipment. In this review, we have highlighted the recent advances and working principle of gold nanoparticles based colorimetric aptasensors as promising methods for antibiotics detection in different food and environmental samples (2011–2020). Furthermore, possible advantages and disadvantages have also been summarized for these methods. Finally, the recent challenges, outlook, and promising future perspectives for developing novel aptasensors are also considered.

Portable and field-deployed surface plasmon resonance and plasmonic sensors

Plasmonic sensors are ideally suited for the design of small, integrated, and portable devices that can be employed in situ for the detection of analytes relevant to environmental sciences, clinical diagnostics, infectious diseases, food, and industrial applications. To successfully deploy plasmonic sensors, scaled-down analytical devices based on surface plasmon resonance (SPR) and localized surface plasmon resonance (LSPR) must integrate optics, plasmonic materials, surface chemistry, fluidics, detectors and data processing in a functional instrument with a small footprint. The field has significantly progressed from the implementation of the various components in specifically designed prism-based instruments to the use of nanomaterials, optical fibers and smartphones to yield increasingly portable devices, which have been shown for a number of applications in the laboratory and deployed on site for environmental, biomedical/clinical, and food applications. A roadmap to deploy plasmonic sensors is provided by reviewing the current successes and by laying out the directions the field is currently taking to increase the use of field-deployed plasmonic sensors at the point-of-care, in the environment and in industries.

Bio-hybrid inorganic microparticles derived from CO2 for highly efficient and selective removal of antibiotics

BACKGROUND

Antibiotics, which are the most important medication in human history, have brought global concerns due to their potential risk to human health and environment by accelerating the development of drug-resistant bacteria, and accumulating in the food chain system. Among antibiotics, oxytetracycline (OTC) is widely used in aquaculture, and its potential risk of toxicity to human by bioaccumulation has been reported. Therefore, the effective removal of OTC is highly needed.

RESULTS

In this study, we report bio-hybrid inorganic microparticles (apt-mag-SiCC) for efficient capturing and facile magnet-based separation of oxytetracycline (OTC). These bio-hybrid inorganic microparticles are composed of magnetic separable silica coated calcium carbonate microparticles (mag-SiCC) derived from CO2, conjugated with oxytetracycline binding aptamers (OBA). These bio-hybrid inorganic microparticles were successfully synthesized, based on the characterization data obtained by SEM, FT-IR, EDAX, BET, and CLSM. About 6 μm sized bio-hybrid inorganic microparticles showed low non-specific adsorption to OTC and other molecules, and the selective capturing towards to the OTC in both buffer and tap water. Moreover, these bio-hybrid mineral microparticles were found to be stable, even after the repeated usages, maintaining the initial capturing efficiency.

CONCLUSION

Using the newly synthesized bio-hybrid inorganic microparticles, we could successfully capture OTC by facile magnet-based separation. With advantages of theses bio-hybrid inorganic microparticles such as easy fabrication, low-price, and environmental friendliness, this novel material could be utilized in the drinking water treatment, in vitro medicinal diagnostics, or in vitro removal of antibiotics lining out from the blood (blood purification).

Critical Review: DNA Aptasensors, Are They Ready for Monitoring Organic Pollutants in Natural and Treated Water Sources?

There is a growing need to monitor anthropogenic organic contaminants detected in water sources. DNA aptamers are synthetic single-stranded oligonucleotides, selected to bind to target contaminants with favorable selectivity and sensitivity. These aptamers can be functionalized and are used with a variety of sensing platforms to develop sensors, or aptasensors. In this critical review, we (1) identify the state-of-the-art in DNA aptamer selection, (2) evaluate target and aptamer properties that make for sensitive and selective binding and sensing, (3) determine strengths and weaknesses of alternative sensing platforms, and (4) assess the potential for aptasensors to quantify environmentally relevant concentrations of organic contaminants in water. Among a suite of target and aptamer properties, binding affinity is either directly (e.g., organic carbon partition coefficient) or inversely (e.g., polar surface area) correlated to properties that indicate greater target hydrophobicity results in the strongest binding aptamers, and binding affinity is correlated to aptasensor limits of detection. Electrochemical-based aptasensors show the greatest sensitivity, which is similar to ELISA-based methods. Only a handful of aptasensors can detect organic pollutants at environmentally relevant concentrations, and interference from structurally similar analogs commonly present in natural waters is a yet-to-be overcome challenge. These findings lead to recommendations to improve aptasensor performance.

Aptamer-Based Biosensors for Antibiotic Detection: A Review

Antibiotic resistance and, accordingly, their pollution because of uncontrolled usage has emerged as a serious problem in recent years. Hence, there is an increased demand to develop robust, easy, and sensitive methods for rapid evaluation of antibiotics and their residues. Among different analytical methods, the aptamer-based biosensors (aptasensors) have attracted considerable attention because of good selectivity, specificity, and sensitivity. This review gives an overview about recently-developed aptasensors for antibiotic detection. The use of various aptamer assays to determine different groups of antibiotics, like β-lactams, aminoglycosides, anthracyclines, chloramphenicol, (fluoro)quinolones, lincosamide, tetracyclines, and sulfonamides are presented in this paper.

Insight into the Molecular Mechanisms of AuNP-Based Aptasensor for Colorimetric Detection: A Molecular Dynamics Approach

Colorimetric aptasensor based on assembly of salt-induced gold nanoparticles (AuNPs) is a promising biosensor. However, the molecular mechanism of the aptasensor is far from being fully understood. Herein, molecular dynamics (MD) simulation was used to investigate molecular interactions in the detection of ochratoxin A (OTA) including the following: (i) the molecular recognition of the anti-OTA aptamer, (ii) OTA-aptamer interactions in monovalent (Na⁺) and divalent (Mg²⁺) electrolytes, (iii) the binding mode of citrate on the AuNP surface, (iv) interactions of the aptamer with citrate-capped AuNPs, and (v) a detailed mechanism of the aptasensor. Our MD simulations revealed a specific binding of the OTA-aptamer complex, compared with OTB and warfarin. Compared with Na⁺, Mg²⁺ ions exerted a more effective attractive force between OTA and anti-OTA aptamer. Three different binding modes of citrate on AuNP surfaces were found. The kinetics of the adsorption of unfolded aptamers onto the citrate-capped AuNP was also elucidated. Most importantly, our MD simulation revealed an insightful analysis of the molecular mechanisms in the AuNP-based aptasensor and paved the way for the design of a novel colorimetric aptasensor for other target molecules, which is not limited to OTA detection.

Practical Application of Aptamer-Based Biosensors in Detection of Low Molecular Weight Pollutants in Water Sources

Water pollution has become one of the leading causes of human health problems. Low molecular weight pollutants, even at trace concentrations in water sources, have aroused global attention due to their toxicity after long-time exposure. There is an increased demand for appropriate methods to detect these pollutants in aquatic systems. Aptamers, single-stranded DNA or RNA, have high affinity and specificity to each of their target molecule, similar to antigen-antibody interaction. Aptamers can be selected using a method called Systematic Evolution of Ligands by EXponential enrichment (SELEX). Recent years we have witnessed great progress in developing aptamer selection and aptamer-based sensors for low molecular weight pollutants in water sources, such as tap water, seawater, lake water, river water, as well as wastewater and its effluents. This review provides an overview of aptamer-based methods as a novel approach for detecting low molecular weight pollutants in water sources.

Ultrasensitive detection of ochratoxin A using aptasensors

Regarding teratogenic, carcinogenic, and immunotoxic nature of ochratoxin A (OTA), selective and sensitive monitoring of this molecule in food samples is of great importance. In recent years, various methods have been introduced for detection of OTA. However, they are usually time-consuming, labor-intensive and expensive. Therefore, these parameters limited their usage. The emerging method of detection, aptasensor, has attracted more attention for OTA detection, due to distinctive advantages including high sensitivity, selectivity and simplicity. In this review, the new developed aptasensors for detection of OTA have been investigated. We also highlighted advantages and disadvantages of different types of OTA aptasensors. This review also takes into consideration the goal to find out which designs are the most rational ones for highly sensitive detection of OTA.

Aptamer-based environmental biosensors for small molecule contaminants

Aptasensors are promising biosensors, which take advantage of using aptamers as a recognition element. The combination of the excellent characteristics of aptamers and the leading detection platform techniques, such as optical, electrochemical with nanomaterial-integrated, or mass-sensitive techniques with high sensitivity and specificity draws a promising view for the application of the aptasensors for the detection of harmful small toxic chemicals and real-time monitoring in the environments. In spite of attraction of aptasensors, application of them is limited to the complex environment due to the facts that how the immobilization of aptamers onto the surface affects the functions of aptamers and their structures for the detection of environmental contaminants are not clearly known. This review examines the most recent update on the selection of aptamers for small molecules, the development and application of aptasensors in the detection of small molecule contaminants in environment. Additionally, their applications to the real samples as environmental monitoring reported in the publications also are reviewed.

A novel sandwich-type electrochemical aptasensor based on GR-3D Au and aptamer-AuNPs-HRP for sensitive detection of oxytetracycline

In this paper, a novel sandwich-type electrochemical aptasensor has been fabricated and applied for sensitive and selective detection of antibiotic oxytetracycline (OTC). This sensor was based on graphene-three dimensional nanostructure gold nanocomposite (GR-3D Au) and aptamer-AuNPs-horseradish peroxidase (aptamer-AuNPs-HRP) nanoprobes as signal amplification. Firstly, GR-3D Au film was modified on glassy carbon electrode only by one-step electrochemical coreduction with graphite oxide (GO) and HAuCl₄ at cathodic potentials, which enhanced the electron transfer and loading capacity of biomolecules. Then the aptamer and HRP modified Au nanoparticles provide high affinity and ultrasensitive electrochemical probe with excellent specificity for OTC. Under the optimized conditions, the peak current was linearly proportional to the concentration of OTC in the range of 5×10^-10-2×10^-3gL^-1, with a detection limit of 4.98×10^-10gL^-1. Additionally, this aptasensor had the advantages in high sensitivity, superb specificity and showed good recovery in synthetic samples. Hence, the developed sandwich-type electrochemical aptasensor might provide a useful and practical tool for OTC determination and related food safety analysis and clinical diagnosis.