Chip-based array magnetic solid phase microextraction on-line coupled with inductively coupled plasma mass spectrometry for the determination of trace heavy metals in cells

Micro-droplet printed ion-selective membrane sensors for in situ monitoring of marine heavy metal ions

Fast, accurate, and reliable techniques for marine toxic heavy metal ions (HMI) detection are critical for the ecological environment and human health. One of the fatal drawbacks of traditional ion selective electrochemical sensors is that the modification of electrode cannot be accurately quantified, resulting in poor repeatability of the detection electrode and large error between the multi-electrode detection results. In order to tackle this challenge, this study presents ultra-fine micro-droplet printed electrodes for the in-situ detection of Cd2+, a carcinogenic and toxic HMI commonly found in the ocean. The ion selective membrane casting liquid was dispersed into tiny droplets with a diameter of micron through microfluidic technology, and the microdroplets were precisely arranged on the electrode surface. As a result, the modification error of electrode was reduced to pL level (accurate to 10 pL), which greatly improved the repeatability between electrodes prepared in different batches. The results of experiments with pure electrolyte, interference ions and artificial seawater indicated that the micro-droplet printed sensors possessed excellent properties of accuracy, precision, repeatability, and anti-interference. This novel micro-droplet printed sensor has the potential to capture an accurate picture of nearshore HMI in heterogeneous environments under shock conditions.

Non-Faradaic Impedimetric Detection of Heavy Metal Ions via a Hybrid Nanoparticle-DNAzyme Biosensor

Due to rapid industrialization, novel water-quality monitoring techniques for the detection of highly toxic and hazardous heavy metal ions are essential. Herein, a hybrid noble nanoparticle/DNAzyme electrochemical biosensor is proposed for the simultaneous and label-free detection of Pb2+ and Cr3+ in aqueous solutions. The sensor is based on the combination of a two-dimensional naked-platinum nanoparticle film and DNAzymes, whose double-helix configuration disassembles into smaller fragments in the presence of target-specific heavy metal ions. The electrochemical behavior of the fabricated sensor was investigated with non-faradaic electrochemical impedance spectroscopy (EIS), resulting in the successful detection of Pb2+ and Cr3+ well below their maximum permitted levels in tap water. So far, there has been no report on the successful detection of heavy metal ions utilizing the non-faradaic electrochemical impedance spectroscopy technique based on advanced nanomaterials paired with DNAzymes. This is also one of the few reports on the successful detection of chromium (III) via a sensor incorporating DNAzymes.

Electrochemical Sensors for Heavy Metal Ion Detection in Aqueous Medium: A Systematic Review

Heavy metal ions (HMIs) are very harmful to the ecosystem when they are present in excess of the recommended limits. They are carcinogenic in nature and can cause serious health issues. So, it is important to detect the metal ions quickly and accurately. The metal ions arsenic (As3+), cadmium (Cd2+), chromium (Cr3+), lead (Pb2+), and mercury (Hg2+) are considered to be very toxic among other metal ions. Standard analytical methods like atomic absorption spectroscopy, atomic fluorescence spectroscopy, and X-ray fluorescence spectroscopy are used to detect HMIs. But these methods necessitate highly technical equipment and lengthy procedures with skilled personnel. So, electrochemical sensing methods are considered to be more advantageous because of their quick analysis with precision and simplicity to operate. They can detect a wide range of heavy metals providing real-time monitoring and are cost-effective and enable multiparametric detection. Various sensing applications necessitate severe regulation regarding the modification of electrode surfaces. Numerous nanomaterials such as graphene, carbon nanotubes, and metal nanoparticles have been extensively explored as interface materials in electrode modifiers. These nanoparticles offer excellent electrical conductivity, distinctive catalytic properties, and high surface area resulting in enhanced electrochemical performance. This review examines different HMI detection methods in an aqueous medium by an electrochemical sensing approach and studies the recent developments in interface materials for altering the electrodes.

A review on hyphenation of droplet microfluidics to separation techniques: From instrumental conception to analytical applications for limited sample volumes

In this study, we review various strategies to couple sample processing in microfluidic droplets with different separation techniques, including liquid chromatography, mass spectrometry, and capillary electrophoresis. Separation techniques interfaced with droplet microfluidics represent an emerging trend in analytical chemistry, in which micro to femtoliter droplets serve as microreactors, a bridge between analytical modules, as well as carriers of target analytes between sample treatment and separation/detection steps. This allows to overcome the hurdles encountered in separation science, notably the low degree of module integration, working volume incompatibility, and cross contamination between different operational stages. For this droplet-separation interfacing purpose, this review covers different instrumental designs from all works on this topic up to May 2023, together with our viewpoints on respective advantages and considerations. Demonstration and performance of droplet-interfaced separation strategies for limited sample volumes are also discussed.

Room temperature cost-effective synthesis of carbon quantum dots for fluorescence pattern recognition of metal ions

Herein, a type of low-consuming carbon quantum dot (CD) has been synthesized at room temperature in just 45 minutes via Schiff base reaction between o-phthalaldehyde (OPA) and polyethyleneimine (PEI). These CDs are pH-dependent, so a novel label-free florescent sensor array can be constructed by utilizing buffers with various pH levels, which leads to distinctive fluorescence response patterns upon being challenged with metal ions for their pattern recognition. The results demonstrate that large-scale detection of metal ions can be achieved with as little as 3 types of sensors. Additionally, the sensors are able to discriminate between various metal ion concentrations and mixtures of different metal ions. The technique demonstrates potential uses in water quality monitoring by promising straightforward, quick, sensitive, and potent discrimination of metal ions.

A colorimetric detection of Hg2+ based on gold nanoparticles synthesized oxidized N-methylpyrrolidone as a reducing agent

In this study, a gold nanoparticles colorimetric probe (AuNPs) with direct response to mercury ions (Hg2+) were developed using treated N-methylpyrrolidone (NMP) and chloroauric acid (HAuCl4) as precursors. NMP showed good reducibility after high temperature hydrolysis and could be used as reducing and stabilizing agent to synthesize AuNPs. The prepared AuNPs have obvious characteristic absorption peaks and appear wine-red. At the same time, it was found that the presence of Hg2+ can cause the aggregation of AuNPs, increased the absorbance at 700 nm, and changed the color of the solution into blue-gray. This method is capable of sensitive and specific determination of Hg2+ ranging from 1 to 30 μM, with the limit of detection (LOD) at 0.3 μM. The method showed good specificity for the determination of Hg2+ and has the potential to be applied to Hg2+ detection in sewage samples in the environment.

A novel AuNP colorimetric sensor based on a polyadenine probe for ultra-sensitive detection of Ag. ANALYTICAL METHODS : ADVANCING METHODS AND APPLICATIONS 2023;15:626-630. [PMID: 36645653 DOI: 10.1039/d2ay02026b] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

Silver(I) ions (Ag⁺) are harmful to humans and can be bioaccumulated in organisms. Although numerous methods for Ag⁺ analysis have been established, new strategies are still in urgent need. Here, we propose a colorimetric sensor based on polyadenine (polyA)-mediated DNA-functionalized gold nanoparticles (AuNPs) for the specific measurement of Ag⁺ ions. In this strategy, a polyA-modified Au probe with high uniformity was assembled successfully. The method was based on Ag⁺-induced aggregation of the probe. Ag⁺ was reflected according to the color variations of solution. Taking advantage of the low cost and convenient assembly of the polyA-based Au probe, our strategy determined Ag⁺ with high sensitivity and wide range. In addition, by changing probes or nanoparticles, the proposed strategy is expected to be a universal platform for detecting other analytes in environmental and even biological samples.

Investigation of toxic effect of mercury on Microcystis aeruginosa: Correlation between intracellular mercury content at single cells level and algae physiological responses

Single-cell studies can help to understand individual differences and obtain atypical cellular characteristics in view of cellular heterogeneity. Herein, the accumulation of mercury (Hg) in single algae cells was studied by droplet chip-time resolved inductively coupled plasma mass spectrometry analytical system, and the relation of Hg accumulation to the physiological responses of algae cell was explored. When low concentrations of Hg²⁺ (5-20 μg/L) were used in the exposure experiment, the content of Hg in single cells increased in first 2 h, then decreased with further increase of exposure time to 96 h, probably due to the growth dilution effect of the algae. When exposed to 30 μg/L Hg²⁺, the uptake of Hg by individual cells increased over time, which was associated with increased cell membrane permeability. The exposure to Hg²⁺ (5-30 μg/L) inhibited the growth of algae in a concentration-dependent manner and serious growth inhibition occurred under the exposure concentration of 30 μg/L. While the exposure concentration was lower than 20 μg/L, algal cells exhibited a recover tendency due to the self-protection mechanism of algal cells. Bivariate results showed that intracellular Hg accumulation was significantly negatively correlated with cells growth in terms of OD₆₈₀, photosynthetic pigments, F_v/F_m and PI_abs. On the contrast, reactive oxygen species content, superoxide dismutase activity, and cell membrane permeability were significantly positively correlated with the accumulation of intracellular Hg. These results are helpful to further understand the toxic effect of Hg on algae.

Core-shell architectured NH2-UiO-66@ZIF-8/multi-walled carbon nanotubes nanocomposite-based sensitive electrochemical sensor towards simultaneous determination of Pb2+ and Cu2

Amino functionalized zirconium-based metal-organic framework (NH₂-UiO-66) and zinc-based zeolitic imidazolate framework (ZIF-8) were integrated to develop a core-shell architectured hybrid material (NH₂-UiO-66@ZIF-8, NU66@Z8). The morphology and structure evolutions of core-shell NU6@Z8 were investigated by FE-SEM, XRD, FTIR, and XPS. The NU66@Z8 combined with carboxylated multi-walled carbon nanotubes (CMWCNT) was deposited on a glassy carbon electrode (GCE) for fabricating an electrochemical platform towards detecting Pb²⁺ and Cu²⁺. The NU66@Z8/CMWCNT/GCE revealed significantly improved electrochemical performance for determination of Pb²⁺ and Cu²⁺ compared with the individual components, which can be attributed to the strong adsorption capacity, unique core-shell structure, and large electrochemical active surface area of NU66@Z8/CMWCNT. Under the optimal conditions, the developed sensor exhibited excellent sensing capability with a low limit of detection (Pb²⁺,1 nM; Cu²⁺, 10 nM) and a wide determination range (Pb²⁺,0.003-70 μM; Cu²⁺, 0.03-50 μM). The sensor showed high selectivity towards common interfering ions and good repeatability. The real sample recoveries of proposed sensor were in the range 95.0-103% for Pb²⁺ (RSD ≤ 5.3%) and 94.2-106% for Cu²⁺ (RSD ≤ 5.9%), suggesting that the NU66@Z8/CMWCNT is suitable for examining trace heavy metals in natural environment.

A chip-based supersonic microfluidic nebulizer for efficient sample introduction into inductively coupled plasma - Mass spectrometry

As the use of microfluidic chips for handling biological samples is increasing, so is the need for combining them with powerful analytical techniques for metal determination such as inductively-coupled plasma mass spectrometry (ICP-MS). So far, coupling a microfluidic chip to an ICP-MS has been demonstrated mainly through the use of conventional pneumatic micro-flow nebulizers. However, disadvantages associated with the use of such nebulizers entail dead volume issues and liquid suction exerted on the outlet channel of the chip. Herein, we propose that a microfluidic chip, bearing a pneumatic nozzle for liquid nebulization, has the potential to advance metal determination in chip-based ICP-MS. More specifically, we demonstrate for the first time that the coupling of a chip-based supersonic microfluidic nebulizer (chip-μf-Neb) to an ICP-MS can be conveniently achieved through the use of a spray chamber with a laminar flow makeup gas. Operation of the combined system was evaluated at low liquid flow rates across 0.5-20 μL min^-1, while nebulization and makeup argon (Ar) gas flow rates were optimized with respect to maximizing indium (In) sensitivity and minimizing oxide formation; a maximum sensitivity of 40000 cps (μg L^-1)^-1 was achieved at 10 μL min^-1. The system was further evaluated for its performance in single-particle analysis, featuring a transport efficiency of 46% for Ag nanoparticles. Finally, the capabilities for conducting single-cell analysis were demonstrated with the detection of ⁸⁰Se and ⁷⁵As in individual Chlamydomas reinhardtii cells, which were previously incubated in 20 μM of selenate and 300 μM of arsenate, respectively. Efficient operation at low liquid flow rates along with the absence of self-aspiration render this nebulizer a promising tool for combining the powerful field of microfluidics with metal quantitation by means of ICP-MS.

Multifunctional microfluidic chips for the single particle inductively coupled plasma mass spectrometry analysis of inorganic nanoparticles

This study aimed at exploiting the so far unexploited potential of carrying out on-line sample pretreatment steps on microfluidic chips for single particle inductively coupled plasma mass spectrometry (spICP-MS) measurements, and demonstrating their ability to practically facilitate most of the simpler tasks involved in the spICP-MS analysis of nanoparticles. For this purpose, polydimethylsiloxane microfluidic chips, capable of high-range dilution and sample injection were made by casting, using high-precision, 3D-printed molds. Optimization of their geometry and functions was done by running several hydrodynamic simulations and by gravimetric, fluorescence enhanced microscope imaging and solution-based ICP-MS experiments. On the optimized microfluidic chips, several experiments were done, demonstrating the benefits of the approach and these devices, such as the determination of nanoparticle concentration using only a few tens of microliters of sample, elimination of solute interferences by dilution, solution-based size calibration and characterisation of binary nanoparticles. Due to the unique design of the chips, they can be linked together to extend the dilution range of the system by more than a magnitude per chip. This feature was also demonstrated in applications requiring multiple-magnitude dilution rates, when two chips were sequentially coupled.

A combination approach using two functionalized magnetic nanoparticles for speciation analysis of inorganic arsenic

Mercapto- and amino-functionalized magnetic nanoparticles, Fe₃O₄@SiO₂@MPTMS (SMNPs-MPTMS) and Fe₃O₄@SiO₂@APTES (SMNPs-APTES), have been applied as magnetic solid-phase extraction (MSPE) sorbents to directly extract arsenite (As(III)) and arsenate (As(V)) respectively, followed by inductively coupled plasma-mass spectrometry (ICP-MS) detection. Various MSPE parameters were optimized including dose of magnetic adsorbent, pH of sample solution, loading and elution conditions of analytes, adsorption capacity and reusability of SMNPs-MPTMS and SMNPs-APTES for As(III) and As(V) respectively. Under the optimized MSPE conditions, this combined scheme possesses excellent selectivity and strong anti-interference ability without any oxidation or reduction prior to capture of these two species. It is found that with a 25-fold enrichment factor, the limits of detection of As(III) and As(V) were 23.5 and 10.5 ng L^-1, respectively. To verify the reliability of the proposed protocol, a certified reference material of environmental water was analyzed, and the results for inorganic arsenic species were in close agreement with the certified values. The applicability of the combination strategy for speciation analysis of inorganic arsenic was evaluated in spiked tap, river, lake and rain water samples. Good recoveries of 89%-96% and 90%-102% were achieved for As(III) and As(V), respectively, with the relative standard deviation ranges of 3.2%-8.0% and 2.5%-7.6%. Through the characterization of functionalized magnetic nanoparticles and the optimization of MSPE experiment, it is confirmed that the existence of mercapto and amino groups on SMNPs-MPTMS and SMNPs-APTES sorbents are responsible for the extraction of As(III) and As(V), respectively, via coordination and electrostatic interactions.

Dispersive magnetic solid phase microextraction on microfluidic systems for extraction and determination of parabens

In this study, a customized microfluidic system was utilized for magnetic solid phase extraction of parabens. For this sake, magnetite nanoparticles were synthesized and coated with polyaniline to enable efficient extraction and magnetic separation of sorbents particles. The synthesized particles were extensively characterized in terms of morphology, composition, and magnetic properties. The utilized microfluidic platform consisted of a relatively long spiral microchannel fabricated through laser-cutting and multi-layered assembly. To obtain an efficient dispersion, simultaneous flows of sample solution and magnetic beads dispersion were introduced to the chip with the aid of two syringe pumps. In order to increase the stability of the dispersed nanoparticles in the aqueous solution, various chemical and instrumental parameters were investigated and optimized. In this context, exploitation of hydrophobic surfactants and surface charge manipulation of the particles was shown to be a highly promising approach for effective dispersion and maintenance of magnetic beads in long microfluidic channels. Under the optimized conditions, the calibration curves were linear in the range of 5.0-1000.0 μg L^-1 for propyl paraben and 8.0-1000.0 μg L^-1 for methyl- and ethyl paraben with coefficients of determination greater than 0.992. Relative standard deviations were assessed as intra- and inter-day values which were less than 7.2% and the preconcentration factors in water were 10-15 for 100 μg L^-1 of parabens in water. Finally, the method was applied for the extraction of parabens from fruit juice, sunscreen, and urine samples which showed favorable accuracy and precision.

Chip-based microfluidics on-line with inductively coupled plasma - mass spectrometry for standard dilution analysis

Microfluidics coupled on-line with ICP-MS detection can be combined with powerful quantitation procedures that take advantage of internal standardization and standard additions, such as the recently introduced Standard Dilution Analysis (SDA). Although so far used at mL min^-1 flow rates, here we demonstrate that SDA can be conveniently employed with a microfluidic chip-based ICP-MS system to improve determination accuracy for various sample types, including water, biological and cell digest samples, analyzed at μL min^-1 flow rates. The efficient coupling of a microfluidic chip to ICP-MS was accomplished using a combination of commercially available components, including a pneumatic high-efficiency nebulizer and a spray chamber designed to allow for the addition of a laminar flow makeup gas. The addition of the makeup gas was crucial in order to avoid detrimental suction effects that can disrupt the operation of the microfluidic chip and cause signal instability, while it still allowed for the highly sensitive detection of metal isotopes by using ICP-MS. All mixing and dilution operations of the sample with the two calibration solutions required for SDA were performed in an automated and highly reproducible fashion on the microfluidic chip with the assistance of an external distributor valve. High average recoveries (97.4-100.1%) and low average relative standard deviations (2.9-4.8%) were achieved for the determined elements (Cd, Co, Pb, Cr) across several spiked matrices and certified reference materials, whereas only 140 μL of sample is required for SDA in triplicate or 40 μL for a single analysis. Hence, accuracy, precision, limited sample consumption, and the elimination of the need for manual sample dilution and mixing manipulations are some of the advantages of this newly developed chip-based microfluidic SDA ICP-MS technique.

An aptasensor for the detection of Pb2+ based on photoinduced electron transfer between a G-quadruplex-hemin complex and a fluorophore

Due to the threat to health of heavy metal contamination, simple and rapid detection methods for heavy metals are an urgent needed in environment protection and food safety. In this work, we have developed a fluorescent aptasensor for the 'turn-off' model detection of Pb²⁺ . The key feature of the aptasensor is that the dye-labelled nucleic acid strand can be folded into a G-quadruplex structure in the presence of Pb²⁺ . This conformational change induces photoinduced electron transfer (PET) between a G-quadruplex-hemin complex and 6-carboxyrhodamine X (ROX), which results in fluorescence quenching of ROX. We systematically investigated the interaction mechanism between Pb²⁺ and the aptasensor and the effects of several environmental parameters were also studied. Under the optimum conditions, the proposed method exhibited a good liner relationship between the concentration of Pb²⁺ and fluorescence quenching efficiency in the range 25-500 nM and the limit of detection was 1.02 nM. In addition, this method also manifested good performance in spiked lettuce samples with satisfactory recoveries of 87.10-109.6%. This target-induced PET platform can be further expanded to other heavy metal analysis.

Magnetic nanomaterials as sorbents for trace elements analysis in environmental and biological samples

This review focuses on magnetic nanomaterials as sorbents for trace elements analysis in environmental and biological samples. The design and preparation of magnetic nanomaterials with specific functional groups for trace elemental analysis are summarized, along with relevant adsorption mechanism. The application of these magnetic sorbents in different operation modes for the quantification of trace elements and their species in environmental and biological samples are discussed. The trend of development in this field is also prospected.

Studies on a glutathione coated hollow ZnO modified glassy carbon electrode; a novel Pb(ii) selective electrochemical sensor

Herein, we report the electrochemical detection of heavy metal ions such as Pb(ii), Cd(ii) and Hg(ii) ions while using glutathione coated hollow ZnO modified glassy carbon electrode (Glu-h-ZnO/GCE). An excellent voltammetric response of the modified electrode towards these metal ions was observed by different voltammetric techniques. Among the different target metal ions, a selective electrochemical response (sensitivity = 4.57 μA μM-1) for the detection of Pb(ii) ions was obtained with differential pulse voltammetric (DPV) measurements. Besides, under optimal experimental conditions and in the linear concentration range of 2-18 μM, a very low detection limit of 0.42 μM was obtained for Pb(ii) ion. The observed electrochemical behaviour of Glu-h-ZnO/GCE towards these metal ions is in conformity with the band gap of the composite in the presence of various test metal ions. The band gap studies of the composite and various "Composite-Metal Ion" systems were obtained by reflectance as well as by computational methods where results are in close agreement, justifying the observed electrochemical behaviour of the systems. The lowest band gap value of the "Composite-Pb" system may be the reason for the excellent electrochemical response of the Glu-h-ZnO modified GCE towards the detection of Pb(ii) ion.

A turn-on luminescence probe based on amino-functionalized metal-organic frameworks for the selective detections of Cu2+, Pb2+ and pyrophosphate

A "turn-on" fluorescent probe based on amino-functionalized metal-organic frameworks (MOF-5-NH₂) is developed for the detection of Cu²⁺, Pb²⁺ and pyrophosphate (P₂O₇^4-, PPi). The fluorescence emission of fluorescent materials obtained by one-step synthesis is attributed to organic ligands. Cu²⁺ and Pb²⁺ coordinate with the amino group on the surface of the MOF-5-NH₂, which is ascribed to the host-guest electron transfer between analyte and probe, giving rise to the fluorescence quenching. After adding PPi, the intense affinity between Cu²⁺ and PPi remove Cu²⁺ from the MOF-5-NH₂, blocking of the electron transfer process, and the fluorescence can be recovered. The limit of detection is 0.057, 0.25 and 0.32 μmol L^-1 for the detection of Cu²⁺, Pb²⁺ and PPi, respectively. This turn-on mode based fluorescent probe shows preferable sensitivity and specificity to detect Cu²⁺, Pb²⁺ and PPi. These results demonstrate that the fluorescent MOF-5-NH₂ as a sensing platform displays remarkably performance.

Environmentally benign synthesis of fluorescent carbon nanodots using waste PET bottles: highly selective and sensitive detection of Pb2+ ions in aqueous medium

Green fluorescent carbon nanodots (size ∼6 nm) as a turn-off fluorescent optical nano-sensor for selective and sensitive detection of Pb²⁺ ions from aqueous medium.

A potent multifunctional Ag/Co-polyvinylpyrrolidone nanocomposite for enhanced detection of Cr(III) from environmental samples and its photocatalytic and antibacterial applications

Trivalent chromium (Cr(III)) is considered to exhibit hormesis (bi-phasic dose-response) property, where low dose be beneficial and high dose shows toxic effect. The present work describe the development of a bimetallic Ag/Co-polyvinylpyrrolidone nanocomposite (Ag/Co-PVP NPs) probe to detect and quantify Cr(III) ions from aqueous samples. The hydrodynamic size and zeta potential of the particle was determined to be 29 ± 1.3 nm and -37.19 ± 2.4 mV respectively. The interaction of Cr(III) with Ag/Co-PVP probe showed drastic change in colour of NPs from dark brown to pale yellow, with corresponding blue shift, tapering width and increased peak intensity. The probe showed high specificity towards Cr(III) among the tested metal ions. A linearity was observed between various dilutions of Cr(III) ions (10 to 50 nM) and the absorbance of Ag/Co-PVP NPs at 428 nm with R² value of 0.998. The minimum detectable limit of Cr(III) was calculated to be 0.6 nM. The influence of salinity, temperature and pH on detection was studied. The probe was found to detect Cr(III) at acidic pH effectively. Competitive metal ions did not interfere the detection of Cr(III). The water sample collected from Noyyal river was taken to estimate Cr(III) by using the prepared probe to ensure practical applicability. The sample contains 9.3 nM of Cr(III) that was cross verified with AAS analysis. Hence, it is understood that the reported probe can be used to detect Cr(III) selectively with high accuracy from aqueous samples. In addition, the particles also exhibited excellent photocatalytic activity under visible light. Ag/Co-PVP nanocomposites exhibited excellent antibacterial activity against both gram +ve (B. subtilis) and gram -ve (E. coli) bacteria.

Paper-based electroanalytical devices for stripping analysis of lead and cadmium in children's shoes

Children's shoes are potential sources of toxic heavy metals, especially for younger children. Electrochemical detection could be applied for effective stripping analysis of heavy metals (such as Cd and Pb). However, the substrates of working electrodes are still limited and it is not well known which property is critical. Herein ITO glass was used as the substrate and the working electrode was modified with carbon cement for stripping analysis of Cd and Pb. The electrochemical impedance spectra of the ITO modified electrodes suggested the connection between the resistance and the electrochemical responses of heavy metals in stripping analysis, depending on the dilution ratio of the carbon cement. After optimization, the ITO modified electrodes in paper-based analytical devices could be used to sensitively quantify Cd and Pb with the concentration ranging from 10 to 1000 ppb. The detection limit of Pb2+ could reach less than 1 ppb while that of Cd2+ could reach 5 ppb, depending on the pH value of the sample solution. The paper-based electroanalytical devices could be used to quantify the concentration of Cd and Pb in children's shoes. This study implied the impact of the electric conductivity of the electrode substrates on stripping analysis, which might help to find more materials for the fabrication of the working electrodes.

Aggregation-induced chemiluminescence system for sensitive detection of mercury ions

As mercury ions (Hg²⁺) are emanated to surroundings in the course of various natural events and human activities, an accurate sensing of Hg²⁺ is essential for human health and environmental protection. Herein, a new aggregation-induced chemiluminescence (CL) sensor for fast, sensitive, and selective detection of Hg²⁺ is developed, based on the CL enhancement of bis(2,4,6-trichlorophenyl)oxalate (TCPO)-H₂O₂ system by thiolate-protected gold complexes (Au(I)-thiolate complexes) in the aggregated state. Because Hg²⁺ has a strong interaction with hydrosulfuryl (-SH) groups in Au(I)-thiolate complexes, the aggregation is disrupted and the CL is quenched. The decrease of CL intensity is proportional to Hg²⁺ contents with a linear range of 0.005-10 μg mL^-1 and the limit of detection (LOD) is 3 ng mL^-1. To the best of our knowledge, this is the first AIE CL sensor for Hg²⁺ detection. The study opens up attractive perspectives for developing simple and rapid aggregation-induced CL methods in monitoring heavy metals.

Glutathione-capped Syzygium cumini carbon dot-amalgamated agarose hydrogel film for naked-eye detection of heavy metal ions

Development of a facile and sensitive analytical tool for the detection of heavy metal ions is still a challenging task because of interference from other chemical species. In this work, glutathione (GSH)-capped Syzygium cumini carbon dots (CDs) have been integrated with agarose hydrogel film and used as an amalgamated solid probe for sensing of different metal ions (Pb2+, Fe3+, and Mn2+). The synthesis of a solid sensing platform is based on the electrostatic interactions between GSH-capped Syzygium cumini CDs and agarose hydrogel. The developed hydrogel-based solid probe exhibited good linearities with the concentration ranges of metal ions from 0.005 to 0.075, 0.0075 to 0.1, and 0.0075 to 0.1 mM with detection limits of 1.3, 2.5, and 2.1 μM for Pb2+, Fe3+, and Mn2+ ions, respectively.

Ratiometric Fluorescent Paper-Based Sensor Based on CdTe Quantum Dots and Graphite Carbon Nitride Hybrid for Visual and Rapid Determination of Cu2+ in Drinks

A simple and effective ratiometric fluorescence sensor of CdTe QDs/GCNNs for on-site and rapid analysis of Cu²⁺ has been established by mixing physically CdTe QDs and graphite carbon nitride (GCNNs). Two emissions peaks of CdTe QDs at 572 nm and GCNNs at 436 nm are both excitated at 340 nm. Under a UV lamp, fluorescent of traffic yellow CdTe QDs is linearly quenched by Cu²⁺ (as the detection signal), while blue GCNNs remains unchanged (as the reference), resulting in a distinguishable color change gradually from pink yellow to blue. The limit of detection (LOD) of this new sensor for Cu²⁺ is as low as 0.47 ng mL^-1 with 1.4 % RSD. The established method has been successfully applied to detection of Cu²⁺ in various drinks with satisfactory results. Moreover, a paper-based sensor, which has been prepared by soaking cellulose acetate membrane in CdTe QDs/GCNNs sensor solution, has a wide semiquantitative detection range for Cu²⁺ (0.01 ~ 5.0 μg mL^-1 ). It has realized successfully on-site and rapid determination of Cu²⁺ in red wine without any pretreatment procedure and is of great promotion and application value in determination of Cu²⁺ in liquid samples.

Recent advances in single-cell analysis by mass spectrometry

Cells are the most basic structural units that play vital roles in the functioning of living organisms. Analysis of the chemical composition and content of a single cell plays a vital role in ensuring precise investigations of cellular metabolism, and is a crucial aspect of lipidomic and proteomic studies. In addition, structural knowledge provides a better understanding of cell behavior as well as the cellular and subcellular mechanisms. However, single-cell analysis can be very challenging due to the very small size of each cell as well as the large variety and extremely low concentrations of substances found in individual cells. On account of its high sensitivity and selectivity, mass spectrometry holds great promise as an effective technique for single-cell analysis. Numerous mass spectrometric techniques have been developed to elucidate the molecular profiles at the cellular level, including electrospray ionization mass spectrometry (ESI-MS), secondary ion mass spectrometry (SIMS), laser-based mass spectrometry and inductively coupled plasma mass spectrometry (ICP-MS). In this review, the recent advances in single-cell analysis by mass spectrometry are summarized. The strategies of different ionization modes to achieve single-cell analysis are classified and discussed in detail.

Enhanced 3D paper-based devices with a personal glucose meter for highly sensitive and portable biosensing of silver ion

A variety of routine methods are available for the detection of silver (I) (Ag⁺) ions, but most of them rely on expensive, sophisticated and desktop instruments. Herein, a low-cost, instrument-free and portable Ag⁺ biosensor was described by initially designing a new class of 3D origami microfluidic paper-based analytical devices (μPADs) into each of which one piece of reagent-loaded nanoporous membrane was integrated. It combines analyte-triggered self-growing of silver nanoparticles to block the membrane's pores in situ for rapid yet efficient signal amplification with a handheld personal glucose meter for a portable and sensitive quantitative readout based on the biocatalytic reactions between the glucose oxidase and glucose. Its utility is well demonstrated with the specific detection of the analyte with a limit of detection as low as ∼58.1 pM (3σ), which makes this new biosensing method one of the most sensitive Ag⁺ assays in comparison with many other typical methods recently reported. Moreover, the satisfactory recovery of analyzing several types of real water examples, i.e., tap water, drinking water, pond water and soil water, additionally validates its feasibility for practical applications.

Synthesis of MnCo2O4 nanoparticles as modifiers for simultaneous determination of Pb(II) and Cd(II)

The porous spinel oxide nanoparticles, MnCo₂O₄, were synthesized by citrate gel combustion technique. Morphology, crystallinity and Co/Mn content of modified electrode was characterized and determined by Fourier transform infra-red spectroscopy (FT-IR), scanning electron microscopy (SEM), energy dispersive spectrometry (EDS), X-ray diffraction pattern analysis (XRD), simultaneous thermogravimetry and differential thermal analysis (TG/DTA). Nanoparticles were used for modification of glassy carbon electrode (GCE) and new sensor was applied for simultaneous determination of Pb(II) and Cd(II) ions in water samples with the linear sweep anodic stripping voltammetry (LSASV).The factors such as pH, deposition potential and deposition time are optimized. Under optimal conditions the wide linear concentration range from 0.05 to 40 μmol/dm³was obtained for Pb(II), with limit of detection (LOD) of 8.06 nmol/dm³ and two linear concentration ranges were obtained for Cd(II), from 0.05 to 1.6 μmol/dm³ and from 1.6 to 40 μmol/dm³, with calculated LOD of 7.02 nmol/dm³. The selectivity of the new sensor was investigated in the presence of interfering ions. The sensor is stable and it gave reproducible results. The new sensor was succesfully applied on determination of heavy metals in natural waters.

A porous organic polymer with magnetic nanoparticles on a chip array for preconcentration of platinum(IV), gold(III) and bismuth(III) prior to their on-line quantitation by ICP-MS

A chip-based array is described for magnetic solid-phase microextraction (MSPME) of the ions of Pt, Au and Bi. Magnetic porous organic polymers (MOPs) prepared from magnetite nanoparticles and 1,3,5-tris(4-aminophenyl)benzene are introduced as a novel adsorbent. Eight solid phase extraction columns packed with MOPs were integrated in parallel on a microfluidic chip for array microextraction. After elution with a 12% (m/v) solution of cysteamine hydrochloride (pH 8.0), the eluent is introduced into an ICP-MS instrument for quantification. Under the optimized conditions, the limits of detection for Pt, Au and Bi are 8.6, 4.4 and 3.4 ng L^-1, respectively. The sample throughput is 7 h^-1, and the adsorption capacities are 32, 24 and 24 μg mg^-1 for Pt, Au and Bi, respectively. The method was validated by the determination of Bi in a certified reference material (GSH-1A; human hair), and the values obtained coincided with the certified value. This method was also applied to the determination of Pt, Au and Bi in (spiked) urine and cell samples, and good recoveries (85.8-113%) were achieved. The method is highly sensitive and has a high throughput and a low sample/reagent consumption (with 500 HeLa cells consumed). Graphical abstract Schematic presentation of the magnetic packed column, microfluidic chip, and online chip-based MSPME-ICPMS system. Design sketch of the online system: microextraction unit (blue lines), microvalves (black lines), outlet channels (yellow lines), permanent magnets (red), urine and cell samples.

Microfluidic array surface ion-imprinted monolithic capillary microextraction chip on-line hyphenated with ICP-MS for the high throughput analysis of gadolinium in human body fluids

A novel method by hyphenating chip-based array ion-imprinted monolithic capillary microextraction with ICP-MS was proposed for the online analysis of trace Gd in biological samples.

Analyte-triggered autocatalytic amplification combined with gold nanoparticle probes for colorimetric detection of heavy-metal ions

This work reports a new colorimetric nanosensor for the detection of heavy-metal ions that initially integrates analyte-triggered autocatalytic amplification with o-phenylenediamine-mediated aggregation of label-free gold nanoparticles. Its utility is well demonstrated with the simple, rapid, sensitive, and specific detection of Hg²⁺, Cu²⁺, and Ag⁺ targets with detection limits less than 3 nM.

Facile Chip-Based Array Monolithic Microextraction System Online Coupled with ICPMS for Fast Analysis of Trace Heavy Metals in Biological Samples

Trace heavy metals have great impact on biological system; therefore, it is essential to develop suitable analytical methods for the determination of trace heavy metals in biological samples to elucidate their biochemical and physiological functions in organisms. Herein, we presented a chip-based array monolithic microextraction system and combined it with inductively coupled plasma mass spectrometry (ICPMS) for online analysis of trace Hg, Pb, and Bi in real-world biological samples. Six ethylenediamine modified poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate) (poly(GMA-co-EDMA-NH₂)) capillary monolithic columns were embedded parallelly in microchannels of a microfluidic chip for array monolithic microextraction. Various parameters affecting the chip-based array monolithic microextraction of target metals were investigated. The sample throughput of the proposed method was 16 h^-1, with the limits of detection for Hg, Pb, and Bi of 23, 12, and 13 ng L^-1, respectively. The developed method was validated by the determination of trace Hg, Pb, and Bi in HepG2 cells and human urine samples, and the recoveries for the spiked samples were in the range of 90.4-102%. This chip-based array monolithic microextraction system is easy to prepare, and the proposed online analytical system provides a new platform for trace elements analysis in biological samples with the merits of high sample throughput, high sensitivity, and low sample/reagents consumption.

Magnetic sulfur-doped porous carbon for preconcentration of trace mercury in environmental water prior to ICP-MS detection

A novel magnetic sulfur-doped porous carbon (MSPC) was fabricated via a simple one-step carbonization of a mixture of sucrose, basic magnesium sulfate whiskers and Fe₃O₄@SiO₂ nanoparticles.